How to implement IDOC Serialization(EOIO) using IDOC Adapter

I am sending IDOC from 4.6c to XI to ECC6.0 using IDOC Adapter. I want to ensure that IDOCs are processed serially(EOIO) on the receiver side. I tried setting up the SE16-->IDXQUEUE  on XI for the Receiver system and enabled the Queue processing flag on the Receiver communication channel, but the IDOCs are not serialized.
I see that XI is using XBTO_007(EO) Queue. It should be using the queue that I specified in SE16.Please let me know what else needs to be done to implement EOIO for the IDOC adapter.
Please note Sender is 4.6c System while the receiver is ECC 6.0 on WAS>=6.2
Thanks in advance.
Rajeev Gupta

Rajeev,
From http://help.sap.com/saphelp_nw70/helpdata/en/bd/277264c3ddd44ea429af5e7d2c6e69/content.htm
<b>The receiver or sender system must be based on SAP Web Application Server 6.40 or higher.</b>
The blog listed above is when you need to sends Idoc from R3 to XI in EOIO. It does not work with SAP R3 4.6C  for the reason above.
For sending Idoc's from XI to R3 ( to ECC in your case ) in EOIO, you need to seelct Queue Processing in the Receiver Idoc adapter and the rest I think is handled implicitly by XI.
Regards
Bhavesh
PS: Have not tried this practically though!
Message was edited by:
        Bhavesh Kantilal

Similar Messages

  • IDOC Serialization(EOIO) using IDOC Adapter throwing Mapping error

    Hello SDN Gurus,
    The scenario I am working on is IDOC(PAYEXT & EUPEXR) --> XI (ABAP Mapping) --> Flat File (IDOC Structure).
    The IDOCS produced in Appl system may be in the following order
    PAYEXT
    PAYEXT
    EUPEXR
    PAYEXT
    PAYEXT
    PAYEXT
    EUPEXR
    I need them to be processed in the same order into flat file.
    The scenario is working good except for the serialization. So I did the following
    Created two entries in IDXQUEUE one for each message type with the same Queue name in XI system.
    Created a new rule for the queue and an associated function module. Used this rule in partner profile for both the message types.  I used the following link to create the above two steps.
    /people/community.user/blog/2006/11/04/how-to-serialize-idoc-xml-messages-fed-into-xi
    The SAP system in based on WAS 6.4.
    I can see the queue name & EOIO in the inbound message header.
    I am getting a mapping error in ABAP program. If I inactivate the queue(in Appl system SAP ECC), I don't get any error.
    Does anybody had this problem earlier? Please advice.
    Thanks
    Srini Vaidyam

    I found an OSS note to resolve my issue. The note number is 1057573.
    Whenever the queue is activated, the sender system will not send the <TABNAM> field value in EDI_DC40 structure. This note addresses this problem.
    I found out this by comparing the results from SXI_MAPPING_TEST individually for the message that failed after queue is activated and the message that was successful if the queue is inactivated.
    Only thing I noticed now is even if you selected the radio button "Trasfer Immediately" in Partner profile of Appl. system, the messages are not sent. They are getting collected. So we need to manually push them out using WE14.
    This forum Rocks.
    Thanks. 
    Srini Vaidyam

  • How to implement hyperlink in java using swing components

    hi.....
    pls help me to find out solution
    how to implement hyperlink in java using swing components

    I've got the same problem here.
    I want to implement a HyperlinkListener to a JLabel. (Unlike suggested above, it is only supported by JEditorPane and not JLabel)
    The goal is, that if a user clicks on a Link in a JLabel, the standard browser opens and displays that page.
    Can somebody please help?
    My ultimate goal would be to also be able to add clickable HyperLinks in ToolTip texts, but i guess that'd be even more complicated.

  • How to send images through PI using SOAP adapter

    hi,
    Can anybody tell me how to send images through PI using SOAP adapter.
    Regards ,
    Loveena

    Hi Loveena,
    only as attachments of a SOAP message.
    Regards,
    Udo

  • How to check IDOC Serialization for custom idoc

    In one of my interfaces, we are receiving idocs ARTMAS, INFREC, COND_A and ZMD_ARTHIER in ECC system.Last one is customized one in which basically we have to assign one article to an article hierarchy. So this idoc will contain only article no, hierarchy id and node level in which article will be assigned.
    Now here we have to implement idoc serialization so that if ARTMAS in any case fails then INFREC, COND_A and ZMD_ARTHIER idocs should not be posted. We will be using RBDSER04 program for inbound processing.
    My concern is that whether we have to do any special coding for serialization check in custom function module for the last idoc ZMD_ARTHIER.
    If yes, please please let me know how to do handle that in custom inbound function module.
    Edited by: suman pandit on May 19, 2009 10:47 AM

    Hi,
    you need to create a serialization group (in customizing) and assign all the IDocs (in specific order) to this group incl. your custom IDoc.
    When data is transfered first a SERDAT01 IDoc will be sent, after this your IDocs have to follow in specific order. At last again a SERDAT01 follows and triggers the processing in the destination system.
    Regards,
    Kai

  • How can we create info record using IDOC INFREC?

    Hi Friends,
    Can we create info record using IDOC INFREC. If Yes. How?
    Regards,
    Narendra

    Using IDOC INFREC & FM IDOC_INBOUND_SINGLE

  • How to display Contribution Folder Name using Idoc Script

    Hi, could ypu please tell me how can we display Contribution Folder name using Idoc script by passing dCollectionID. Appreciate your help on this. Thank you
    Regards,
    Ashok

    You should be able to get it directly as dCollectionName, but might have to execute a query to fill in the result set first: select dCollectionName from COLLECTIONS where DCOLLECTIONID = ?

  • How to implement row level security using external tables

    Hi All Gurus/ Masters,
    I want to implement row level security using external tables, as I'm not sure how to implement that. and I'm aware of using it by RPD level authentication.
    I can use a filter condition in my user level so that he can access his data only.
    But when i have 4 tables in external tables
    users
    groups
    usergroups
    webgrups
    Then in which table I need to give the filter conditions..
    Pl let me know this ...

    You pull the Group into a repository variable using a session variable init block, then reference that variable in the data filters either in the LTS directly or in the security management as Filters. You reference it with the syntax VALUEOF("NQ_SESSION.Variable Name")
    Hope this helps

  • How to implement for sap system use HADR

    hi expert ，
           i am a newbie to sap basis， we have a requirement that do HA for our sap using HADR，i want know if there are some good sulotion for my scenario。
       our scenaro is we have two window 2008 sever host，one host  has a sap system and we want the sap db2 database as a primary，and the other host also has a same the system which is restore from the previous sap system which we implement by system copy using database restore not migration。i want know as our secanrio could i achive SAP application HA by HADR，if we donu2018t have  HA  software  like MSCS。whether we must manual monitor the primary sap   when it stop because any issue like hardware failed and then manual start the other sap system in the other host？
      our two sap system have different sap profile beacause the hostname are different.
    our aim is when one of our host can't use we can immediate start the other sap system in the other host, the less the change the better the solution .
    is it possible?
    thanx very much,
    best regards.

    hi paul ,
        thanx for your information，i have already read the inforamtion about sg247363 once-over and SAMP。 but unfortunately we have a different situation，we only have two windows servers and must installed windows server 2008 OS because some reasons。we also don't have have other host to install sap。as this situation，how could we implement HA beacuse we also don't have shared disk。the window server are isolation。
    i  also read some pdf which download from sdn ， in the book the HA is  implemneted as the sap application has a separate host and has two host for DB2 database using HADR，the HA is rely the cluster software 。in this situation the sap application also need HA to avoid single point failure。
        as the limited i have said above， is it possible to do HA by MSCS ，can any body tell me if the MSCS is free to install in OS windows 2008？ if we can't use it  free，have any other solution？in the worst ， we must manual monitor the application and when a sap application or database can't work ，we want to restart the other sap which in the other host，we need the database synchronization between two database which using HADR。is it possible ？if it do， whether there are some additional setup for sap application because the two sap application have different sap profile name（a sap is a system copy from the other by database restore）。
        any reply will be appreciated。

  • How to implement the pessimistic locking using toplink with sybase

    we want to allocate the unique primary key to each row when many user try to insert the records concurrently..So what we are trying to do is we calculate the maximum of Primary Key and incremented it by 1. Now we want to Apply the locking concept on the so that unique key will be allocated to each newly inserted row
    Can you please tell me
    1. how we can genrate unique primary key in toplink using sybase?
    2.how to implement the pessimistic or optimistic locking ?which one will be preferable?

    Hi brother
    I think that this link can help you
    http://download-east.oracle.com/docs/cd/A97688_16/toplink.903/b10064/database.htm#1007986
    Good luck

  • How to implement  business rules by using drolls in OSB

    Hi
    I am new to Drools,can any body tell how to implement drools concept in OSB11,provide any useful links or blogs.
    Thanks in Advance
    Mani

    Mani,
    I have implemented Drools by exposing them over web service call through Business Service of OSB.
    As you are using Java Callout, try to set proper return type for the java method called, better to use XMLObjects as the return type.
    http://www.xenta.nl/blog/2011/08/29/oracle-service-bus-java-callouts-with-xmlobjects/
    http://mazanatti.info/index.php?/archives/63-Oracle-Service-Bus-generating-XML-Objects-from-Java-Callouts.html
    http://blog.xebia.com/2009/10/11/java-callout-on-the-alsb/
    http://itnewscast.com/middleware/oracle-service-bus-java-callouts-xmlobjects
    How to retrieve the java object in a proxy service in osb -- Plz help
    Hope it helps !!
    Abhinav
    Edited by: Abhinav on Dec 12, 2012 4:21 PM

  • How to handle the BOLB column Using JDBC adapter

    Hi,
      I want to sending of a BOLB column from a DB2 database table to another DB2 database, and the sender and receiver both by using JDBC adapter. The two tables in each other database have the same columns.
      Here is the table's structure:
      <ID>string type</ID>
      <PDF>blob type</PDF>
      Also, i haved create two DataTypes in PI system.
      Sender DataType:
      ns:DT_PDF_Req xmlns:ns="http://XXXXX.com/sap/xi">
       <row>
         <ID>1</ID>
         <PDF></PDF>
       </row>
      </ns:DT_PDF_Req>
      Receiver DataType:
      <ns0:DT_PDF_Res xmlns:ns0="http://XXXX.com/sap/xi">
      <STMT>
      <dbtable action="INSERT">
      <table>tablename</table>
      <access>
       <ID></ID>
       <PDF></PDF>
      </access>
      </dbtable>
      </STMT>
      </ns0:DT_PDF_Res>
    When test this interface, i found the that we can get the data, but when execute the insert stms  the follow errors occured  in RWB :
    <ERROR>
    Could not execute statement for table/stored proc. "DBDPUSER.pdf" (structure "STMT") due to com.ibm.db2.jcc.b.nm: DB2 SQL Error: SQLCODE=-103, SQLSTATE=42604, SQLERRMC=255044462d312e330a25c7ec8fa20a352030206f626a0a3c3c2f4c656e677468203620, DRIVER=3.50.153
    JDBC Message processing failed, due to Error processing request in sax parser: Error when executing statement for table/stored proc. 'DBDPUSER.pdf' (structure 'STMT'): com.ibm.db2.jcc.b.nm: DB2 SQL Error: SQLCODE=-103, SQLSTATE=42604, SQLERRMC=255044462d312e330a25c7ec8fa20a352030206f626a0a3c3c2f4c656e677468203620, DRIVER=3.50.153
    </ERROR>
    Can anybody tell me how to resolve the problems?
    And tell me about how to deal BOLB column using PI.
    Best Regards
    Terry

    Hi Terry Qin,
    I understand, you are getting below XML from sender JDBC channel. But when you getting SAX parser error, in receiver JDBC.
    <ns:DT_PDF_Req xmlns:ns="http://XXXXX.com/sap/xi">
    <row>
    <ID>1</ID>
    <PDF></PDF>
    </row>
    </ns:DT_PDF_Req>
    I think it is because the XML which is going to receiver JDBC channel is not well formed (because pdf can containg < & characters).
    You can achive this sceanrio, by selecting receiver JDBC channel as Message Protocol "Native SQL Format" [Link1|http://help.sap.com/saphelp_nwpi711/helpdata/en/44/7c24a75cf83672e10000000a114a6b/frameset.htm] you can send non XML to receiver channel.
    Before that, you have convert above input XML into SQL statement, using Java Mapping.
    Regards,
    Raghu_Vamsee

  • How run reports JDE from BPEL using the Adapter for JD Edwards OneWorld?

    Hi,
    I need to load on line a lot of invoices from Bpel to JD Edwards using the Adapter for JD Edwards OneWorld (iWay).
    Using Business Functions as Web Services it wasn't a not good idea because of this Adapter is poorly constructed and doesn't allow simultaneous loads, a memory leak occurs on JDE server. And to load them invoice by invoice is very slow.
    A choice is to use Z tables and load them through schedules, but Bpel loses total control.
    I heard that I can run processes reports that enable to extract the data from the Z tables and load them into JDE.
    How can I execute reports JD Edwards invoked from BPEL using the Adapter for JD Edwards OneWorld?
    Thanks
    Francisco

    Hi Dario,
    BizTalk 2013 R2 (JDE LOB Adapter) is not tested against latest release of JDE EnterpriseOne 9.1.
    It only supports with 8.12 and 9.0 version of JDE.
    Refer the discussion here:
    Integrating BizTalk with JDE EnterpriseOne
    Rachit
    Please mark as answer or vote as helpful if my reply does

  • How to Integrate XI with Peoplesoft using iWay Adapter

    hi Friends,
            This is Sreeni. I want to use iWay adapter for integrate Peoplesoft with XI.
    can you please help me in this way.

    Hi,
    There is a series of blogs that address this same area. Please look into them. they should surely help,
    /people/yomeshp.sharma/blog/2006/06/01/integrating-jdedwards-system-with-xi-using-iway-adapter-part--i - Part I
    /people/yomeshp.sharma/blog/2006/06/01/integrating-jdedwards-system-with-xi-using-iway-adapter-part--ii - Part II
    /people/yomeshp.sharma/blog/2006/05/31/integrating-jdedwards-system-with-xi-using-iway-adapter-part--iii - Part III
    Regards
    Bhavesh

  • How to implement this Scenario(JMS to IDOC)

    Hi Frnds,
    I am working on one scenario JMS to IDOC .based on JMS Message my XSLT Mapping will genarate Multiple Idocs(max 3) or 2 or one.
       I have to send this IDOCS based on some conditions,the conditions mentioned below.
    xslt mapping genarats one message ,but this contains 3 IDOCS or 2 or 1.(Order Create , Order Change and Order Response),
    what is the best approach to implement this scenario
    1)f Order Create  segment exists (new PO), first check SAP to see if PO does actually exist using RFC Z_BBPR46_GET_PO_FROM_FPA ,If it does not exist, pass Order Create idoc to SAP to create new purchase order
    If it does exist, retrieve PO details from RFC and pass Order Change idoc to SAP to update existing purchase order
    2)If Order Change segment exists (change PO), retrieve PO details using RFC Z_BBPR46_GET_PO_FROM_FPA and pass Order Change idoc to SAP to update existing purchase order
    3)If Order Response segment exists (goods movement), retrieve PO details using RFC Z_BBPR46_GET_PO_FROM_FPA and pass Order Response idoc to SAP to create goods movement.
    Above logic i implemented in one mesage mapping Source is XSLT Mapping Output and Receiver message in message mapping is Multimapping selected 3 IDOCS.
    Regards,
    raj

    thanks

Maybe you are looking for