How to implement node affinity for java type concurrent programs.

How to run a concurrent program against a specific RAC instance with PCP/RAC setup? (Doc ID 1129203.1)
This works for non java registered concurrent programs but not java registered with use the DBC file
EBS RAC environment with two RAC nodes. We would like to implement node affinity to allow concurrent programs to be directed to a single RAC instance. Oracle have provided the NODE AFFINITY ability via the concurrent program definition in Session Control. This then uses the entry in the 10.1.2 tnsnames.ora to pass the request directly through to the instance as defined by Node Affinity.
However, concurrent programs defined as type java do not access the database by the 10.1.2 tnsnames.ora but use the dbc file under $FND_SECURE. This file is configured for both self service and concurrent processing so any change to the dbc file entry will affect both self service and concurrent processing.
How to we implement a node affinity solution for concurrent programs without affecting Self Service conncetions? We'd like the dbc file to directly connect java concurrernt programs through to one instance but the self service connections to use the SERVICE name only.
Regards.
philippe.

Did you think about Online/Batch node concept ? By that way you can seggrecate application connection.

Similar Messages

How to implement secure Licencing for Java Apps?

Hi
I'm already thinking some months about this topic. I serached the web, some books and magazines, i asked quite a lot of people - but in the end, there seems to be no really satisfying answer.
My main question is: what can i do to protect the software i wrote? The problem is, where ever i start, i end with open questions.....
I may start delivering a custom licence key with my software that contains information i.e. about who may run it and for how long. To check integrity i sign the licences key (with a digest) and ckeck the integrity in the application. Like this, i could make sure, that the software runs only with a valid licence.
But two new problem araise - if the licence key is given to the web, everyone will be able to run the software. Second, i have to implement a methode to check the digest, so i have to deliver the key with the software and like this, the key could just be used to generate new licence files. Third, i hav to protect my code, since anyone could recompile it, he could check the algorithms i use to check the digest and even worse, he just could disable the codeblock that checks the licence.
So i use an obfuscator to scramble my code, and to get the most out of this technique, i use a controlflow obfuscator. This adds some security, but still the code can be decompiled but wouldn't be too easy to understand. For making it even a little bit harder to read, i will "distribute" the licence digest check over some different classes.
But still the first two problems remain. So i think about encrypting the licence file. To make that secure, i would use a public/private key encryption since if i use a secret key encryption i would have to deliver the key with the software and anyone could use it to generate new encrypted licene files. The problem with the public/private key is, that i should deliver a public key with the software that is only capable of decrypting, but not of encrypting. Like this, i can implement a decryption methode in the software that can decrypt the licence file and read all requiered licence data but the user is not able to generate a new licence file because he has the read-only key. Obvisouly there is no such private/public key technique that allows one key to be decrypt only and the other to be encrypt and decrypt (or at least encrypt only). Algorithms like PGP have a public key that allows encryption only and a private key that allows decryption only.
I could go on presenting some more ideas i found to "protect" software/licence but the all come to the same point where they leave a lot of other open questions.
I wonder what you all out there do to protect your software, what kind of technique you use for licencing implementation. I would be very glad to read what problem you face reagarding this topics and maybe how you solved it or what your conclusion was.
Greetings
josh

>
yes, absolutely. That's the point. Try to make it hard
to get the software some other way. So it's easer to
get the software by buying it.
Nope.
- There are those who steal it just to steal it. They don't use it.
- There are those who steal it because the price is too extreme. If your income for the year is measured as only several thousand dollars you are not going to be able to buy a package that costs a thousand dollars or more.
- There are those who steal it because the preceived benifit is less than the cost. For instance, at least in the past, MS software cost at least three times as much in some european companies compared to the exchange rate.
- Finally there are those who steal simply because they don't want to pay for it.
As far as I am concerned the last category is the only relevant one. And that is far smaller than any software theft estimates that the software industry regularly claims.
>
>>
Here is an example of someone who thinks that their
work is good enough and valuable enough to stand on
its own...http://www.fileviewer.com/.
And I liked it enough that at one company I hadthem
purchase a site license. And I like it enough thatI
still remember the company five years after thelast
time I needed the product.that's fine and it would be very nice if everybody
would be like you. But that's not the case and you
even may not be sure if not someone in that company
took a copy of the software and the licence and now is
using it for free are even gave it in the "public
domain". Woulnd't that be sad if the company would
have to close down someday because just a few people
are paying for it. Even if it is such a smart
product?There was a clothing chain that closed down because they claimed that, even after installing anti-theft devices, they were still losing too much money from shop lifters.
If that is the case why do all of the other companies still exist?
If your product is good then people will buy it. The successes for that are abundant. The only success stories for copy protection schemes are for the copies that sell those schemes.
>
i wonder if you close your door when you leava your
appartment. I mean, what's wrong with protecting a
code? It's just the same as protecting the money you
earn, the furnish in your appartment, ...
Sorry, when I buy a product then I expect to be able to use it.
With your analogy I would have to use a code that you provided everytime I wanted to get into and out of my apartment.
So for any comments, ideas, ... on how to addsome
more protection i'm very thankfull.You search for "obfuscator".yes, as i wrote in the first posting, i know about
obfuscator, i'm using it, but it's just very poor
protection. That's why I'm looking for a smart concept
to gain a little bit more protection.And if you search for that term in these forums, and read the lengthy posts, you might find some ideas. Which is why I suggested it. (And you might understand why the alternatives are not used.)

How to implement route cipher using java?

Hi guys,,,
I really got a headache solving how to implement route cipher using java lang,,i already got the concept but i really dont get how to implement it using java actually i want to make a presentation of how route cipher works using "adobe flash" but first i will implement it using java coz flash actionscripts are closer to java lang.
Hope you could post some examples or ideas...i would really appreciate it!
thank you so much...

just add an action listener (either keypressed or keytyped) to the frame that you want to record. I did this in NetBeans in about 2 seconds. I can simplify it if you need. As for loging it just write the characters to a file output stream.
public class test extends javax.swing.JFrame {
    /** Creates new form test */
    public test() {
        initComponents();
    /** This method is called from within the constructor to
     * initialize the form.
     * WARNING: Do NOT modify this code. The content of this method is
     * always regenerated by the Form Editor.
    // <editor-fold defaultstate="collapsed" desc=" Generated Code ">
    private void initComponents() {
        setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
        addKeyListener(new java.awt.event.KeyAdapter() {
            public void keyTyped(java.awt.event.KeyEvent evt) {
                formKeyTyped(evt);
        pack();
    // </editor-fold>
    private void formKeyTyped(java.awt.event.KeyEvent evt) {
        System.out.println(evt.getKeyChar());
     * @param args the command line arguments
    public static void main(String args[]) {
        java.awt.EventQueue.invokeLater(new Runnable() {
            public void run() {
                new test().setVisible(true);
    // Variables declaration - do not modify
    // End of variables declaration
}

How to implement Change pointers for Purchase order - ME22N - Custom Fields

Hi Experts,
Can you please tell me how to implement - Change Pointer for Custom fields in IDOC.
I am working on IDOC - For purchase order - acknowledgements - in custom screen/tab in ME22N.
Everything is working fine according to my requirement.
All i need to know is the process of - Creating/Change - Change pointers for Custom fields.
1.How to implement change pointers for custom fields.
2.Can we maintain - Change Document - for custom fields at data element level?
P.S. - I have browsed many previous - forums before posting a new discussion.
please share your inputs...
explaining how to create/implement - change pointers for custom fields will help me .
Regards,
Karthik Rali.

Hi,
To maintain Change Document for custom field:
1. Check if "Change document" checkbox is set in data element.
2. Find Change Document Object for transaction.
   You can use SQL trace - ST05.
   Look there for line with table CDHDR and statement insert values
   (for example for transaction KA02 Change Document Object is KSTAR)
3. Regenerate update program for this Change Document Object in transaction SCDO
Change documents for z-fields schould be generated.
I am not sure about change pointers but they are configured somehow in BD61 and BD50.

How to implement Ajax toolkit for SharePoint2013?

Hi All,
How to implement Ajax toolkit for SharePoint2013?

Hi Sam,
Based on your description,
I can suggest as follows:
Use the “SharePoint AJAX 3.5 for 2010 and 2013”
solution.
Download URL:
http://sharepointajax.codeplex.com/
2.
Use the Ajax Control Toolkit with ASP.NET 4.5.
Download correct version of Ajax Control Toolkit.
http://ajaxcontroltoolkit.codeplex.com/releases/view/109918
Add AjaxControlToolkit.dll reference to your project.
Add Ajax Control Toolkit ScriptManager in master page.
Register Ajax Control Toolkit namespaces in SharePoint package Designer.
More information:
http://timscyclingblog.wordpress.com/2013/03/22/ajaxcontroltoolkit-version-7-0123-with-net-4-5/
http://sampathnarsingam.blogspot.in/2012/05/how-to-make-ajax-control-toolkit.html
Please inform me freely if you have any questions.
Thanks
Qiao Wei
TechNet Community Support
Is it possible to use version AJAX
Control Toolkit .NET 4.5 along with SharePoint 2013?
As far as I know with SharePoint we can use only version AjaxControlToolkit(3.0.30930.0). Isnt it?

How to create an extension for generated type idoc

Hi all,
Can u please look into this
How to create an extension for generated type idoc ? for example Idoc type BATMAS02

Enter transaction WE30 (ALE->Extension-> IDOC types->Maintain Idoc type)
- Type in your name of the extended IDOC type (usually starting with 'Z') and click on the Basic IDoc type, click the create icon.
- Click on Create new and enter a description and press enter.
- Click on ZIDOCTYPE01 and then on the Create icon.
- Enter ZIDOCTYPE as the segment type, click on Segment Editor.
- Enter a description for your segment type and create.
- Enter a description for your segment, enter each field required in your IDoc and press enter to validate.
- Save and generate, press back
- To release the segment choose Goto, Release from the menu.
- Check the box on the line of your segment.
- Save, back and enter.
- Your Idoc type structure should be displayed with your new segment.
- Save and back.
- To release the Idoc type choose Extras, Release type from the menu and Yes.
ALE FUNCTION MODULE ENHANCEMENTS
Having extended the IDOC type to contain additional fields for an inbound or outbound application, you now want to enhance ALE function modules for populating the additional segment on the outbound or applying the additional segment data on the inbound application.
The core working code for ALE processes for a given application area is always encapsulated in ABAP/4 function modules. These function modules are associated with such control information as message types and process codes. So the ALE process checks this control information and derives the name of the function module to invoke for that particular IDOC processing from certain database tables. These function modules contain objects known as customer functions, which can be considered SAP Enhanced user exits. A function module is called at a particular point during the processing of the main program or function module, and it can be used to influence data processing at that point by adding code to the customer function. The customer function behaves like a normal function module and has import and export parameters, tables (internal tables) statement, and exception processing. Unlike a conventional user exit, customer functions give you the ability to modify only data available to you by the function moduleâs parameters and internal tables. While most ALE/EDI function modules are supported by customer functions, there are ALE/EDI processes that still use conventional user exits. There are a few ways to determine which function module to enhance for a given message type/process code:
For master data distribution, from SALE go to Extensions -> Master data distribution -> Setup additional data for message types. Search for message type DEBMAS in this example. You see an entry for DEBMAS associated with function module MASTERIDOC_CREATE_SMD_DEBMAS. This data is stored on table TBDME. The function module names for all master data message types follow this pattern: MASTERIDOC_CREATE_SMD_messagetype. This function module calls another function module of name MASTERIDOC_CREATE_DEBMAS or MASTERIDOC_CREATE_messagetype. Search for the words customer function, and you find several hits that can be used to add code to the function module.
From WEDI got to Control -> Inbound process codes -> Inbound with ALE service -> Processing by function module (transaction WE42), or from WEDI go to Control -> Outbound process codes -> Outbound with ALE service -> With function module (transaction WE41). There will be function modules associated with the process codes. For inbound, the function modules usually follow this pattern: IDOC_INPUT_messagetype: for example, IDOC_INPUT_CHRMAS for inbound characteristics master.
Use transaction WE57 or from WEDI go to Development -> Message/Application Object. The entries list the function module, Business Object, message type, and IDOC type that are used for inbound ALE/EDI interfaces.
Customer functions are not specific only to ALE and EDI but also to all programs/modules in SAP R/3. Customer function is a SAP enhancement component; the other two types are menu and screen enhancements.
All customer function exits are maintained in SAP enhancements and are found by using transaction SMOD. After executing transaction SMOD, pull down (F4) on the enhancement name field, and execute again. This provides you with a list of all SAP enhancements available. SAP enhancements are grouped by development class pertaining to an application area. Choose Application development R/3 SD master data distribution for development class VSV to lead to a screen that lists VSV00001 as an enhancement (see Figure 5). Press Component +/- to display its function exit components. There are four possible components listed, all of which are function exits (and are function modules) that are called from the ALE function modules in the form Call Customer Function Î001â. This is a special occurrence of the ABAP statement Call. Go to item Exit_SAPLVV01_ 001, which you need to enhance for the Customer Master outbound example of an IDOC extension. In the ALE-function module MASTERIDOC_CREATE_DEBMAS, the statement CALL Customer Function 001 is translated in the background to call component EXIT_SAPLVV01_001. Although this function exit can be edited using transaction SE37, you will use a simpler approach.
When you use SAP enhancements and their components, you manage them with an SAP object known as a project, which is like an envelope containing the selected enhancements and their components. A project can be used to control the execution of components and to transport them to other clients and instances in SAP. Basically, the process involves creating a project, including enhancements and components that are to be enhanced, editing the components, and then activating the project. The following process creates a project for our example Customer Master IDOC extension:
Execute transaction CMOD.
Enter name of project, say CSTMAST1.
Click on Create.
Enter a description of the project.
Save.
Click on SAP Enhancements.
Enter VSV00001 for Enhancement.
Save.
Once youâve created the project, edit the function exit components and activate the project. Remember that the code in the function exit enhancement will execute only if the project is activated. In fact, this is a convenient SAP enhancements feature, whereby the work in progress (developing code in the customer function) will not affect users of that application. When the code is completed, the project can be activated so the enhanced functionality takes effect. It can also be deactivated for maintenance.
As mentioned earlier, customer functions (function exits) are embedded in ALE function modules and can be used to influence the creation and modification of IDOC data on an outbound application or to post additional or modified IDOC data to an inbound R/3 application. Function exits are similar to regular function modules, with import/export parameters, tables (internal tables), and exceptions.
The two important factors to consider while developing the customer function are:
1. The point in the ALE function module where the function exit occurs
2. The data made available by the customer function that can be modified or posted to the R/3 application, based on the direction.
Because some function modules have several customer functions, it is critical to choose the function exit best suited for that particular enhancement. Do not attempt to perform activities that the function exit is not designed for. The importance of this point is illustrated by the following description of enhancing function modules for outbound and inbound ALE interfaces.
Outbound interfaces. In an outbound ALE interface you use function exits (customer functions) to populate additional segments created by an IDOC extension or to modify the existing IDOC data segments as per business requirements. Previously, you identified that enhancement VSV00001 has a component EXIT_SAPLVV01_001 (function exit), which can be used for populating the additional data segment Z1SADRX that you created in the IDOC extension ZDEBMASX (IDOC type ZDEBMASZ, based on Basic IDOC type DEBMAS02). You also learned that the ALE function module that calls this function exit is MASTERIDOC_CREATE_DEBMAS, which has a statement Call Customer Function 001.
Browse the function module MASTERIDOC_CREATE_DEBMAS using transaction SE37. You will find that this customer function is invoked for every segment of IDOC type DEBMAS02. In fact, the function exit is called soon after the creation of an existing segment has been populated with data and appended to the IDOC data table (internal table). Also, the function exit is exporting the message type, IDOC type, and the segment name and is importing the IDOC extension type. It is also passing the IDOC data internal table. This indicates that the ALE function module is allowing you to populate additional segments for every existing segment and modify the existing segmentâs data.
Letâs write ABAP/4 code to accomplish the task of populating IDOC segment Z1SADRX with a contact personâs business address:
From SE37, display function module MASTERIDOC_CREATE_ DEBMAS.
Find Customer Function 001.
Double-click on 001.
The function EXIT_SAPLVV01_001 will be displayed.
Double-click on INCLUDE ZXVSVU01.
You will be asked to create a new include object. Proceed as desired.
Enter code (as in Listing 1).
Be sure to perform a main program check (Function Module -> Check -> main program) and extended program check (Function module -> Check -> Extended check).
Now that you have extended the IDOC and enhanced the ALE function module based on the requirements for the contact personâs business address on the Customer Master, letâs test the interface. You should create a logical system and define a port for this interface. You should also configure the Customer Distribution Model to indicate that message type DEBMAS is being distributed to this logical system. The only difference in configuration between a regular outbound ALE interface and an enhanced one is the partner profile definition. While maintaining the outbound parameters of the partner profile, make sure the IDOC type is ZDEBMASZ. The fields for Basic IDOC type and extension type are automatically populated with DEBMAS02 and ZDEBMASX, respectively.
To maintain the contact personâs business address of a customer:
Use transaction BD12 or from BALE go to Master Data ->Customer -> Send and send that Customer Master record by executing the transaction after filling in the relevant fields such as customer number, message type, and logical system.
Use transaction WE02 or WE05 to verify the IDOC created. You should see the new segment Z1SADRX populated with the correct data.
With SAP releases below 4.5B, you cannot capture changes to business address through change pointers because a change document object is not available for capturing business address changes, and also earlier releases have not been configured to write change documents for a contact personâs business address. If you would like this functionality, you can either create change document objects, generate function modules to create change documents, and perform ALE configuration to tie it in, or make a cosmetic change to the contact person screen data while changing the contact personâs business address so that it gets captured as a change to the Customer Master. Subsequently, the ALE enhancement that you performed captures the contact personâs business address.
Inbound interfaces. The process for enhancing inbound ALE interfaces is similar for outbound, with a few exceptions; specifically in the coding of customer functions (function exits) for the ALE/EDI function modules.
The first step is to create an IDOC extension for the specific Basic IDOC type by adding new segments at the appropriate hierarchy level: that is, associated to the relevant existing segment. Populate the data fields on the new segments with application data by the translator or external system/program before importing them into the R/3 System. Then, find the ALE function module that is invoked by the inbound processing. By browsing through the code or reading the documentation on the function exit enhancements using the SMOD transaction, identify the function exit in which you should place your code. The technique used in the code to post the additional or modified IDOC data to the application can vary based on the application rules and requirements, the data available at that point in processing, and the application function modules available to update the application tables. It is important to search first for application modules that process the data and see if they can be called within the function exit. If the additional data in the extended segments in specific to a custom table or resides in nonkey fields of a single or small set of tables, you may be able to update it directly by SQL statements in the function exit. This approach should be carefully evaluated and is certainly not highly recommended.
Another option is to use Call Transaction from within the function exit to process the additional data. For example, in the case of message type WMMBXY for inbound goods movements from a warehouse management system, the standard interface creates batches for materials, but does not update its characteristics. In such a case, you can use Call Transaction MSC1 to create the batch and assign characteristic values to it from within the function exit provided.
regards,
srinivas

How to Trace oracle Host Type concurrent program

How to Trace oracle Host Type concurrent program
I have enabled trace in concurrent definition screen but couldnt get the trace file
the Host script executes multiple plsql packages for interfaces and sent emails

Hi,
How to Trace oracle Host Type concurrent programSee (FAQ: Common Tracing Techniques within the Oracle Applications 11i/R12 [ID 296559.1]) -- 4. How does one enable trace for a concurrent program?
I have enabled trace in concurrent definition screen but couldnt get the trace fileDo you mean the trace file is not generated?
the Host script executes multiple plsql packages for interfaces and sent emailsIs this a seeded or custom concurrent program?
Thanks,
Hussein

How to import WMV file for use in adobe programs, especially After Effects and/or Premier?

How to import WMV file for use in adobe programs, especially After Effects and/or Premier?

I have the latest adobe creative cloud and i'm using Mac 10.8.2
My client gave me a wmv file that she wants some people blurred out in the background but when I go to import the media, it's greyed out. I'm assuming that After Effects will be the best solution for this, but maybe there is another way.
I can purchase a video converter and convert it to .mov but that costs extra money that I don't want to spend just to do this one project.

How do I sign up for the creative cloud program for photographers?

How do I sign up for the creative cloud program for photographers?

I think there will be a link in this... Cloud Plans https://www.adobe.com/products/creativecloud/buying-guide.html

Send Notifications for Purchasing Documents Concurrent Program fails

Hi,
We have Oracle EBS 11i (11..5.10) - Oracle Financials and Order Management implemented on Single Node Windows 2003.
Send Notifications for Purchasing Documents Concurrent Program is scheduled to run every 10 minutes and sometimes Completes with Error.
Due to this other Concurrent Requests arr going to Pending Normal.
During this time a pop-up window appears on the server's console with message like 'FNDLIBR.exe has encountered errors......' with OK button. Once I click the OK button other Concurrent Request are able to Run and completes.
Usually the Send Notifications for Purchasing Documents Concurrent Program completes normally in 1 min or less. The ones that Completes with Error have run for more than 2-3 hours.
Please let me know how to troubleshoot this issue. Windows Event Viewer also shows this error " Faulting application FNDLIBR.exe, version 0.0.0.0, faulting module SQLLIB80.DLL, version 0.0.0.0, fault address 0x00009e1f."
Thanks
Thiru

Hi
This note advices to apply patch 5567785 (one-off patch).yes it is, i suggest check first you have this patch on your system or not. If it doesnt than i suggest take backup for if something goes wrong after patch. Than apply patch to your test instance
Hope it helps
Regard
Helios

Please help me...how to implement a class DateAndTime.java

I have a class named DateAndTime.java How should I implement a method which allows me to check if the date entered by user is valid or not?. Also when the hour continues to a next day, how should I implement a method for a nextDay()? Thank you
class DateAndTime
     private int hour, minute, second, month, day, year;
     Constructor to initialize DateAndTime.
     Default DateAndTime 0:0:0 1/1/1
     public DateAndTime()
     {     month = 1;
          day =1;
          year =1;
     Constructor to set DateAndTime to specific values.
     Calls member function setDate and setTime to set variables.
     @param h hour of the DateAndTime
     @param m minute of the DateAndTime
     @param s second of the DateAndTime
     @param mo month of the DateAndTime
     @param d day of the DateAndTime
     @param y year of the DateAndTime
     public DateAndTime(int h, int m, int s, int mo, int d, int y)// CONSTRUCTOR
     {     if (isValidDate(mo, d, y))    //if date entered is valid, the date and time will be set
               setDate(mo, d, y);
               setTime(h, m, s);
          else
               System.out.println("Invalid Date :" + mo + "/" + d + "/" + y);
               setDate(1,1,1);
     Set the values of hour, minute, and second.
     @param h hour of the DateAndTime
     @param m minute of the DateAndTime
     @param s second of the DateAndTime
     public void setTime( int h, int m, int s ) //DEFINING SETTERS, SETTING time,hour,minute,and second,
     setHour( h );
     setMinute( m );
     setSecond( s );
     Set the hour if valid or to default 0.********************SET HOUR
     public void setHour( int h )
     {     hour = ( h >= 0 && h < 24 ) ? h : 0;     }
     Set the minute if valid or to default 0.******************SET MINUTE
     public void setMinute( int m )
     {     minute = ( m >= 0 && m < 60 ) ? m : 0;     }
     Set the hour if valid or to default 0. ******************SET SECOND
     public void setSecond( int s )
     {     second = ( s >= 0 && s < 60 ) ? s : 0;     }
     Set the values of month, day, and year.
     @param mo month of the DateAndTime
     @param d day of the DateAndTime
     @param y year of the DateAndTime
     public void setDate(int mo, int d, int y)//DEFINING SETTERS, SETTING DATE FOR month,day,and Year
          setMonth(mo);
          setDay(d,mo,y);
          setYear(y);
     Set the month if valid or to default 1. ****************SET MONTH
     public void setMonth(int mo)
     {     month = (mo >= 1 && mo <= 12)? mo : 1; }
     Set the day if valid or to default 1. ****************SET DAY
     public void setDay(int d, int mo, int y) // ?????
     {     day = (isValidDate(mo,d,y))? d : 1; }
     Set the year if valid or to default 1. ****************SET YEAR
     public void setYear(int y)
     {     year = (y >=1)? y : 1;     }
     Get the hour value.
     @return int
     public int getHour() {   return hour; } //DEFINING GETTERS get hour, minute, second
     Get the minute value.
     @return int
     public int getMinute() {   return minute; }
     Get the second value.
     @return int
     public int getSecond() {   return second; }
     Get the month value.
     @return int
     public int getMonth() {   return month; } //DEFINING GETTERS get month, day, and year
     Get the day value.
     @return int
     public int getDay() {   return day; }
     Get the year value.
     @return int
     public int getYear() {   return year; }
     Finds whether a given date is a valid date in A.D..
     @param mo month of the DateAndTime.
     @param d day of the DateAndTime.
     @param y year of the DateAndTime.
     @return boolean valid or not
     public static boolean isValidDate(int mo, int d, int y)
     //your code goes here
          return true;
     Print time DateAndTime in military format.
     public void printMilitary()
     System.out.println( month + "/" + day + "/" + year + "\t"
               + ( hour < 10 ? "0" : "" ) + hour + ":"
     + ( minute < 10 ? "0" : "" ) + minute);
     Formats DateAndTime for printing.
     @return String
     public String toString()
     return ( month + "/" + day + "/" + year + "\t"
               + (( hour == 0 || hour == 12 ) ? 12 : hour % 12)
     + ":" + ( minute < 10 ? "0" : "" ) + minute
     + ":" + ( second < 10 ? "0" : "" ) + second
     + ( hour < 12 ? " AM" : " PM" ));
     Increments DateAndTime by one second.
     Hint: calls nextDay() if tick() results in going in to next day.
     public void tick()
          //Your code goes here
second++;
if (second >59)
     second = 0;
     minute++;
if (minute > 59)
     minute = 0;
          hour++;
          if(hour >23)
     //      hour = 0;
     nextDay();
     Increments DateAndTime by one day.
     public void nextDay()
          day++;
          //your code goes here
}//end class

See java.util.Calendar
and java.util.GregorianCalendar
You can do all types of date validation with those classes.

How to implement tool-tip for the list items for the Choice column in SharePoint 2013

I had created a simple list with a "Choice" column, i have three entries in my drop-down,
First Entry
Second Entry
Third Entry.
If i select any entries in drop-down and hour-over (Second Entry), a
tool-tip need need to show.
Is it possible? If yes how to implement any help will be appreciated.

Hi,
We can use JavaScript to achieve it.
The following code for your reference:
<script type="text/javascript" src="/sites/DennisSite/Shared%20Documents/js/wz_tooltip.js"></script>
<script type="text/javascript" src="/sites/DennisSite/Shared%20Documents/js/jquery-1.11.1.min.js"></script>
<script type="text/javascript">
$(function () {
$("select[title='Choice']").change(function(){
Tip($(this).val());
$("select[title='Choice']").mouseout(function(){
UnTip();
</script>
Download wz_tooltip.js:
http://www.walterzorn.de/en/tooltip/tooltip_e.htm#download
Best Regards
Dennis Guo
TechNet Community Support

How to implement content caching for jsp page ?

Hello everyone,
I am reading an article <Servlets and Jsp Best Practice>,at
http://developer.java.sun.com/developer/technicalArticles/javaserverpages/servlets_jsp/#author, on one section it is saying :
"Cache content: You should never dynamically regenerate content that doesn't
change between requests. You can cache content on the client-side, proxy-
side,or server-side. "
Now I am working on a project. For every user, some of the content servlet generated will be the same for at least a week . I am thinking if I implement caching for these jsp pages, that would increase performace a lot.
But I have no idea how to implement it either client-side or server-side, can someone give me a hint ?
Thanks,
Rachel

You mean actually you are caching the response stream
and the key to distinguish between different response
streams are made of user's different request
parameters. And the filter's function is to intercept
the request to see if this request parameter's
combination already exists in the Hashmap,then either
use the cached response or forward to
servlet.....really interesting...Do I get it right ?Yes that's it in a nutshell.
>
Then how do you build those response streams in
advance ? You did it manually or have some mechanism
to build it automatically ?
The data gets cached the first time somebody visits the page.
Find some examples on Filters, and take a look at the HttpServletResponseWrapper class. You need to cache response headers as well as the body. Another pitfall that you might run into is handling an If-modified-since header on the request. Don't cache the results of those requests.
-Jonathan
>
Thanks again !
Rachel

How to implement Personal Information for non supported countries

Hi,
Can anyone give me some tips on how to implement Personal Information ESS services for countries which are not supported by the standard business package. We need to implement for the following countries as well as a part of global implementation.
Cyprus
Czech Republic
Egypt
Ireland
Luxembourg
Monaco
Russia
Ukraine
Regards,
Subhadip

Hi Subhadip,
You need to the following customization settings in SPRO.
Personnel Management->ESS->Service Specific settings->OWn Data->Reuse Country Specific Application
Just follow the IMG documentation and it should be done. Basically we do,
1. Identify the Infotype and the country for which we want to re-use existing application (e.g Egypt).
2. Select the country from which you want to copy the screens (e.g. Australia, India)
3. Specify the "Use Case and Active Subtypes" for that country. Follow the documentation for this node.
4. Maintain country specific entries for services (in this case will add entries for the new countries added).
Hope this helps.
Regards,
Jigar

How to change number range for document type ?

Dear All
Experts
How to change the number range for document types for entry view? I am trying to change the number range for all document type as per defined ranges in FBN1, but at the time of saving document type and number range the system is throwing error message as
Doc. type C1: Number range 07 is used for ledger L6 with doc. type AE
Message no. FAGL_LEDGER_CUST093
I have defined a leading ledger in system too with these settings
1)     Define ledger for accounting.
2)     Defining currencies for it.
3)     Defining ledger group for the same.
4)     Defining accounting principles
5)     Assignment of principles to leading ledger.
Are there any extra settings required for leading ledger settings?
I have some doubts those are :-
How document types defined at ledger level?
How to define them at leading ledger level? (Like my case)
Focus on this will be appreciable.
Regards,
Sharvari Joshi.

hi ,
The document numbers in the leading ledger and the non leading ledgers should be in sync, they should not have any differences, so incase you are trying to change the number range for C1, the number range 07 is already been assigned to doc type AE. i guess you have cant use 07 for C1. may be you can try out with an other number range. check this and let me know if you are able to do this.
coming to
1.How document types defined at ledger level?
2.How to define them at leading ledger level? (Like my case)
Ans 1. please try defining document types for entry view in a ledger.
path : SPRO- financial accounting new -financial accounting global settings new - document -document types -define document types for entry view in ledger.
upon prompt enter the ledger and go ahead creating the number ranges for the document types.
Hope this helps.
Regards
amrutha

How to implement node affinity for java type concurrent programs.

Similar Messages

Maybe you are looking for