How to increase LVM based System.img file ?

I am trying to create Oracle VM template from System.img, here my requirement is increasing the System.img file to 60GB from 6GB.
I would like to increase LVM based System.img to 60GB and swap to 32GB, could you please assist me how to do this ?
Where as I can able to increase non-LVM based System.img using modifyjeos command as follows
#modifyjeos -f System.img -T 61440 -S 32768 -a $RPM_LIST -m $RPM_DIR -nogpg -P ELCONTROL.img 102400 $U01_MOUNT
So I need to expand the System.img to 60GB and swap to 32GB. Also need to be able to add a disk at 100GB, can you please let me know what is equivalent command for modifyjeos for LVM based System.img ?
Please let me know if you need more information

Hi,
Verify how much the total size of the Virtual Machine.
- go to repository
- resize the system.img
- start the VM
resize the Partition;
- lvmresize lvm-partition
- resize4fs lvm-partition
resize swap:
- swapof lvm-swap-partition
- lvresize lvm-swap-partition
- swapon lvm-swap-partition
I hope this can help you
Best Regards

Similar Messages

How to increase page size for balance file upload in Workspace.

Hi All,
Please suggest how to increase page size for balance file upload in shared Workspace pages.
Thanks,

A word of caution is in order regarding changing from facing to non-facing and back again. If you have overridden master page items, you'll get a second, non-overridden copy on all the even-number pages when that half of the master page is re-applied. This applies to master text frames which override automatically when text flows into them as well as to objects you manually override. I think you'll find this particular technique also only works for master text frames, whereas the Layout Adjustment should work in all situations where frames snap to guides.

How to Increase the # of Recently Opened Files in DW CS6 ???

Can anyone please give a detailed instruction on how to increase the number of Recently Opened files in Dreamweaver CS6? I have read the forums everywhere and do not see a solution here that works. For me there is no: Menus/MM/File_RecentFiles.htm
I mean I have a "Menus" directory but no "MM" directory inside that... also, if I create one... I still need a sample "File_RecentFiles.htm" to copy. Or maybe someone knows another solution?

I don't have DWCS6, just DWCS4 and DWCC. When I go to Program Files(x86) > Adobe > Adobe Dreamweaver CC (or Dreamweaver CS4) > configuration > Menus > MM > and then open the file named "File_RecentFiles.htm" at either location, this is the code...

<html xmlns:MMString="http://www.macromedia.com/schemes/data/string/">
<HEAD>

<TITLE><MMString:loadString id="Menus/MM/File_RecentFiles/title" /></TITLE>
<SCRIPT LANGUAGE="javascript" SRC="../../Shared/MM/Scripts/CMN/string.js"></SCRIPT>
<SCRIPT LANGUAGE="javascript" SRC="File_RecentFiles.js"></SCRIPT>
<SCRIPT LANGUAGE="javascript">

</SCRIPT>
</HEAD>
<BODY>
</BODY>
</HTML>
EDIT: It appears you should definitely have this file, unless something is wrong with your installation, or perhaps you are in the wrong directory?

How do I view IOS system log files on my iPhone?

I'm getting occasional buzzes on my iPhone when it is in silent mode, but it's not obvious where the buzzes are coming from. How can I view the IOS log files on the phone to figure out which application is generating the alerts?

Hey Steve,
You'll want to connect your phone to your computer and sync it in iTunes. You can read more about it here:
iOS: Syncing your data with iTunes
http://support.apple.com/kb/HT1386
Welcome to Apple Support Communities!
Have a good one,
Delgadoh

How do I delete c:\system recovery files after I have recovered my laptop?

Recovery completed now want to remove 13 GB file C:\System Recovery Files from the laptop. I either get error message access denied or permission required. I am the owner, administrator, user for this file. Please help me get rid of it asap. Thanks in advance for your help.

Hi,
There are few options but please try the following method for C:\Windows.old folder:
http://www.kodyaz.com/articles/delete-windows-old-removal.aspx
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to increase the field lenght of file uplaod in BSP application

Hi All,
   I am facing a problem with u201Cuploadu201D filed length in BSP application.
When we upload the file in BSP page, the path displayed should be the full path (i.e. from where the file is being upload the file)
Now this field is appearing 20 char length
Now I want to increase the length of the upload field (Input field) to be 100 char so that the path is visible.
In the current application the file upload is being done through a structure (attributes)
In this structure the fields are like this
PAGE_NAME
ID
FOR
TAGS
ROW_INDEX
COLUMN_INDEX
OTR_NAME
REQUIRED_NAME
MAXLENGTH
SIZE
TABLE_NAME
ON_SELECT
VALUE
DISABLED
ONCLICK
TEXT
TYPE
Using this method:
CALL METHOD cl_htmlb_fileupload=>factory
          EXPORTING
            Id      = ls_form_save-id
          RECEIVING
            Element = lv_fileup.
        bee_table->add ( level = 2 element = lv_fileup ).
This cl_htmlb_fileupload is named as class interface.
Which has the CLG_HTMLB_FILEUPLOAD (it is a class) it is defined in attributes.
In this class it has the attribute u201CSIZEu201D by default string 20.
Now I need to change this attribute length from 20 to 100
For this I copied the standard class CL_HTMLB_FILEUPLOAD into ZCL_HTMLB_FILEUPLOAD.
This ZCL_HTMLB_FILEUPLOAD contains all attributes of the standard class CL_HTMLB_FILEUPLOAD
Including the one class (CLG_HTMLB_FILEUPLOAD), this is defined as an attribute (ABOVE MENTIONED?)
This class is appearing in non editable mode, so   I have copied this class into zclass (ZCLG_HTMLB_FILEUPLOAD).but still I am not able to edit the attribute called u201Csizeu201D
And also I am not bale to add the zclass in place of the ZCLG_HTMLB_FILEUPLOAD
Kindly tell me how to modify the length of the field u201Csize u201Cand also how to add the zclass in the attributes of one class (syntax)
Thanks in advance
Rambabu.A

Hi,
Class CLG_HTMLB_FILEUPLOAD is a class automatically generated when a BSP Element is created. You should not change/create such a class, unless by creating your own BSP Element.
As per your requirement, you can use the SIZE parameter of method factory:
ls_form_save-size = '100'.
CALL METHOD cl_htmlb_fileupload=>factory
EXPORTING
Id = ls_form_save-id
Size = ls_form_save-size
RECEIVING
Element = lv_fileup.
Regards,
Tanguy

How can I playback blu-ray .img files generated by Final Cut Pro X?

When I share a Final Cut Pro X project in Blu-ray and I set the output device as Hard drive (blu-ray), it creates a blu-ray image with a .img extension.
By the way, the project's clips are AVCHD (.mts extension) and the settings are set to 1080i (1440x1080 25i).
My question is: can I playback this file without having to burn a blu-ray disc?
I've been looking for information, and some people seems to playback blu-ray .iso files.
And: would Compressor 4 solve my problem? (is there anyway in Compressor to create a .iso image or something easier to play?).
By the way, I do have access to both Windows and Mac computers.
Thanks in advance,
Pol

Thanks for the answer.
If you own Compressor 4, could you tell me if it includes an option to generate a .iso file instead of a .img?
(here's information on how to playback a .iso).
Thanks,
Pol

How to increase the speed of network file transfer

hi ,
In my application i want to use the file from one system to another system.
i am using stream reader to get the file over the network , its working fine for small file,
but i want to access file size exceed 10 MB then i faced the problem. Its get very slow the file transfer over the network.
so i am try to use java NIO for transfer file,
Using NIO , While i am make server and client both are same system then the file tranfer is 10MB file in 10 seconds , but i am making server and client are different machine then its take so long to transfer file ie (10 MB file in 3 minutes).
I want to reduce the time . If any chance to reduced the file transfer time then please suggest me.
my code is
Server Code :
public class NioServer implements Runnable {
// The host:port combination to listen on
private InetAddress hostAddress;
private int port;
// The channel on which we'll accept connections
private ServerSocketChannel serverChannel;
// The selector we'll be monitoring
private Selector selector;
// The buffer into which we'll read data when it's available
private ByteBuffer readBuffer = ByteBuffer.allocate(10000);
private EchoWorker worker;
// A list of PendingChange instances
private List pendingChanges = new LinkedList();
// Maps a SocketChannel to a list of ByteBuffer instances
private Map pendingData = new HashMap();
public NioServer(InetAddress hostAddress, int port, EchoWorker worker) throws IOException {
    this.hostAddress = hostAddress;
    this.port = port;
    this.selector = this.initSelector();
    this.worker = worker;
public void send(SocketChannel socket, byte[] data) {
    System.out.println("Server Send ");
    synchronized (this.pendingChanges) {
      // Indicate we want the interest ops set changed
      this.pendingChanges.add(new ChangeRequest(socket, ChangeRequest.CHANGEOPS, SelectionKey.OP_WRITE));
      // And queue the data we want written
      synchronized (this.pendingData) {
        List queue = (List) this.pendingData.get(socket);
        if (queue == null) {
          queue = new ArrayList();
          this.pendingData.put(socket, queue);
        queue.add(ByteBuffer.wrap(data));
    // Finally, wake up our selecting thread so it can make the required changes
    this.selector.wakeup();
public void run() {
    while (true) {
      try {
        // Process any pending changes
        synchronized (this.pendingChanges) {
          Iterator changes = this.pendingChanges.iterator();
          while (changes.hasNext()) {
            ChangeRequest change = (ChangeRequest) changes.next();
            switch (change.type) {
            case ChangeRequest.CHANGEOPS:
              SelectionKey key = change.socket.keyFor(this.selector);
              key.interestOps(change.ops);
          this.pendingChanges.clear();
        // Wait for an event one of the registered channels
        this.selector.select();
        // Iterate over the set of keys for which events are available
        Iterator selectedKeys = this.selector.selectedKeys().iterator();
        while (selectedKeys.hasNext()) {
          SelectionKey key = (SelectionKey) selectedKeys.next();
          selectedKeys.remove();
          if (!key.isValid()) {
            continue;
          // Check what event is available and deal with it
          if (key.isAcceptable()) {
            this.accept(key);
          } else if (key.isReadable()) {
            this.read(key);
          } else if (key.isWritable()) {
            this.write(key);
      } catch (Exception e) {
        e.printStackTrace();
private void accept(SelectionKey key) throws IOException {
    System.out.println("Server Accept ");
    // For an accept to be pending the channel must be a server socket channel.
    ServerSocketChannel serverSocketChannel = (ServerSocketChannel) key.channel();
    // Accept the connection and make it non-blocking
    SocketChannel socketChannel = serverSocketChannel.accept();
    Socket socket = socketChannel.socket();
    socketChannel.configureBlocking(false);
    // Register the new SocketChannel with our Selector, indicating
    // we'd like to be notified when there's data waiting to be read
    socketChannel.register(this.selector, SelectionKey.OP_READ);
private void read(SelectionKey key) throws IOException {
    System.out.println("server Read : ");
    SocketChannel socketChannel = (SocketChannel) key.channel();
    // Clear out our read buffer so it's ready for new data
    readBuffer.clear();
//    readFully( readBuffer , socketChannel ) ;
    // Attempt to read off the channel
    int numRead;
    try {
      numRead = socketChannel.read(readBuffer);
    } catch (IOException e) {
      // The remote forcibly closed the connection, cancel
      // the selection key and close the channel.
      key.cancel();
      socketChannel.close();
      return;
    if (numRead == -1) {
      // Remote entity shut the socket down cleanly. Do the
      // same from our end and cancel the channel.
      key.channel().close();
      key.cancel();
      return;
    // Hand the data off to our worker thread
    this.worker.processData(this, socketChannel, this.readBuffer.array(), numRead);
private void write(SelectionKey key) throws IOException {
    System.out.println("Server Write ");
    SocketChannel socketChannel = (SocketChannel) key.channel();
    synchronized (this.pendingData) {
      List queue = (List) this.pendingData.get(socketChannel);
      // Write until there's not more data ...
      while (!queue.isEmpty()) {
        ByteBuffer buf = (ByteBuffer) queue.get(0);
        socketChannel.write(buf);
        if (buf.remaining() > 0) {
          System.out.println( "buf.remaining() " + buf.remaining() ) ;
          // ... or the socket's buffer fills up
          break;
        queue.remove(0);
      if (queue.isEmpty()) {
        // We wrote away all data, so we're no longer interested
        // in writing on this socket. Switch back to waiting for
        // data.
        key.interestOps(SelectionKey.OP_READ);
private Selector initSelector() throws IOException {
    // Create a new selector
    Selector socketSelector = SelectorProvider.provider().openSelector();
    // Create a new non-blocking server socket channel
    this.serverChannel = ServerSocketChannel.open();
    serverChannel.configureBlocking(false);
    // Bind the server socket to the specified address and port
    InetSocketAddress isa = new InetSocketAddress(this.hostAddress, this.port);
    serverChannel.socket().bind(isa);
    // Register the server socket channel, indicating an interest in
    // accepting new connections
    serverChannel.register(socketSelector, SelectionKey.OP_ACCEPT);
    return socketSelector;
private static void readFully(ByteBuffer buf, SocketChannel socket) throws IOException
    int len = buf.limit() - buf.position();
    while (len > 0)
      len -= socket.read(buf);
public static void main(String[] args) {
    try {
      EchoWorker worker = new EchoWorker();
      new Thread(worker).start();
      new Thread(new NioServer(null, 9090, worker)).start();
    } catch (IOException e) {
      e.printStackTrace();
}Client Code :
public class NioClient implements Runnable {
// The host:port combination to connect to
private InetAddress hostAddress;
private int port;
// The selector we'll be monitoring
private Selector selector;
// The buffer into which we'll read data when it's available
private ByteBuffer readBuffer = ByteBuffer.allocate( 10596 ) ;
// A list of PendingChange instances
private List pendingChanges = new LinkedList();
// Maps a SocketChannel to a list of ByteBuffer instances
private Map pendingData = new HashMap();
private byte[] bufferByteA = null ;
// Maps a SocketChannel to a RspHandler
private Map rspHandlers = Collections.synchronizedMap(new HashMap());
public NioClient(InetAddress hostAddress, int port) throws IOException {
    this.hostAddress = hostAddress;
    this.port = port;
    this.selector = this.initSelector();
public void send(byte[] data, RspHandler handler) throws IOException {
    // Start a new connection
    SocketChannel socket = this.initiateConnection();
    // Register the response handler
    this.rspHandlers.put(socket, handler);
    // And queue the data we want written
    synchronized (this.pendingData) {
      List queue = (List) this.pendingData.get(socket);
      if (queue == null) {
        queue = new ArrayList();
        this.pendingData.put(socket, queue);
      queue.add(ByteBuffer.wrap(data));
    // Finally, wake up our selecting thread so it can make the required changes
    this.selector.wakeup();
public void run()
    while (true)
      try
        // Process any pending changes
        synchronized (this.pendingChanges)
          Iterator changes = this.pendingChanges.iterator();
          while (changes.hasNext())
            ChangeRequest change = (ChangeRequest) changes.next();
            switch (change.type)
              case ChangeRequest.CHANGEOPS:
                SelectionKey key = change.socket.keyFor(this.selector);
                key.interestOps(change.ops);
                break;
              case ChangeRequest.REGISTER:
                change.socket.register(this.selector, change.ops);
                break;
          this.pendingChanges.clear();
        // Wait for an event one of the registered channels
        this.selector.select();
        // Iterate over the set of keys for which events are available
        Iterator selectedKeys = this.selector.selectedKeys().iterator();
        while (selectedKeys.hasNext())
        System.out.println( " ----run 5 " ) ;
          SelectionKey key = (SelectionKey) selectedKeys.next();
          selectedKeys.remove();
          if (!key.isValid())
            continue;
          // Check what event is available and deal with it
          if (key.isConnectable())
            this.finishConnection(key);
          else if (key.isReadable())
            this.read(key);
          else if (key.isWritable())
            this.write(key);
      catch (Exception e)
        e.printStackTrace();
private void read(SelectionKey key) throws IOException {
    System.out.println( "---------read 1 " ) ;
    SocketChannel socketChannel = (SocketChannel) key.channel();
    // Clear out our read buffer so it's ready for new data
    this.readBuffer.clear();
    System.out.println( "---------read 2 " + readBuffer.capacity()) ;
     readBuffer = ByteBuffer.allocate( bufferByteA.length ) ;
    // Attempt to read off the channel
//    int numRead;
    try {
//      numRead = socketChannel.read(this.readBuffer);
      readFully( readBuffer , socketChannel ) ;
    } catch (IOException e) {
      // The remote forcibly closed the connection, cancel
      // the selection key and close the channel.
      key.cancel();
      socketChannel.close();
      return;
//    if (numRead == -1) {
//      // Remote entity shut the socket down cleanly. Do the
//      // same from our end and cancel the channel.
//      key.channel().close();
//      key.cancel();
//      return;
    // Handle the response
    this.handleResponse(socketChannel, this.readBuffer.array(), readBuffer.capacity() );
private void handleResponse(SocketChannel socketChannel, byte[] data, int numRead) throws IOException {
    // Make a correctly sized copy of the data before handing it
    // to the client
    byte[] rspData = new byte[numRead];
    // Look up the handler for this channel
    RspHandler handler = (RspHandler) this.rspHandlers.get(socketChannel);
    // And pass the response to it
    if (handler.handleResponse(rspData)) {
      // The handler has seen enough, close the connection
      socketChannel.close();
      socketChannel.keyFor(this.selector).cancel();
private void write(SelectionKey key) throws IOException {
    SocketChannel socketChannel = (SocketChannel) key.channel();
    readBuffer.flip() ;
    List queue = null ;
    synchronized (this.pendingData) {
      queue = (List) this.pendingData.get(socketChannel);
      writeFully( readBuffer , socketChannel ) ;
      // Write until there's not more data ...
      while (!queue.isEmpty()) {
//        ByteBuffer buf = (ByteBuffer) queue.get(0);
//        socketChannel.write(buf);
//        writeFully( buf , socketChannel ) ;
//        if (buf.remaining() > 0) {
//          // ... or the socket's buffer fills up
//          break;
        queue.remove(0);
      if (queue.isEmpty()) {
        // We wrote away all data, so we're no longer interested
        // in writing on this socket. Switch back to waiting for
        // data.
        key.interestOps(SelectionKey.OP_READ);
private void finishConnection(SelectionKey key) throws IOException {
    SocketChannel socketChannel = (SocketChannel) key.channel();
    // Finish the connection. If the connection operation failed
    // this will raise an IOException.
    try {
      socketChannel.finishConnect();
    } catch (IOException e) {
      // Cancel the channel's registration with our selector
      System.out.println(e);
      key.cancel();
      return;
    // Register an interest in writing on this channel
    key.interestOps(SelectionKey.OP_WRITE);
private SocketChannel initiateConnection() throws IOException {
    // Create a non-blocking socket channel
    SocketChannel socketChannel = SocketChannel.open();
    socketChannel.configureBlocking(false);
    // Kick off connection establishment
    socketChannel.connect(new InetSocketAddress(this.hostAddress, this.port));
//    socketChannel.finishConnect() ;
    // Queue a channel registration since the caller is not the
    // selecting thread. As part of the registration we'll register
    // an interest in connection events. These are raised when a channel
    // is ready to complete connection establishment.
    synchronized(this.pendingChanges) {
      this.pendingChanges.add(new ChangeRequest(socketChannel, ChangeRequest.REGISTER, SelectionKey.OP_CONNECT));
    return socketChannel;
private Selector initSelector() throws IOException {
    // Create a new selector
    return SelectorProvider.provider().openSelector();
public static void main(String[] args) {
    try {
      NioClient client = new NioClient(InetAddress.getByName("healsoft1"), 9090);
      Thread t = new Thread(client);
      t.setDaemon(true);
      t.start();
      RspHandler handler = new RspHandler();
      client.readBytesFromFile( handler ) ;
    } catch (Exception e) {
      e.printStackTrace();
private void readBytesFromFile( RspHandler handler ) throws IOException
    File file = new File( "Y:/output.txt") ;
    bufferByteA = getBytesFromFile( file ) ;
    readBuffer = ByteBuffer.allocate(bufferByteA.length ) ;
    readBuffer.put( bufferByteA , 0 , bufferByteA.length ) ;
    send(bufferByteA , handler);
    handler.waitForResponse();
private static void readFully(ByteBuffer buf, SocketChannel socket) throws IOException
    System.out.println( "readFully : " ) ;
    int len = buf.limit() - buf.position();
    int count = 0 ;
    while (len > 0)
      len -= socket.read(buf);
private void writeFully(ByteBuffer buf , SocketChannel socketChannel) throws IOException
    System.out.println( "writeFully : " ) ;
    int len = buf.limit() - buf.position() ;
    SocketChannel socket = socketChannel ;
    socket.open();
    while (len > 0)
      len -= socket.write(buf);
private static byte[] getBytesFromFile(File file) throws IOException
    InputStream is = new FileInputStream(file);
    // Get the size of the file
    long length = file.length();
         * You cannot create an array using a long type. It needs to be an int
         * type. Before converting to an int type, check to ensure that file is
         * not loarger than Integer.MAX_VALUE;
    if (length > Integer.MAX_VALUE)
      System.out.println("File is too large to process");
      return null;
    // Create the byte array to hold the data
    byte[] bytes = new byte[(int)length];
    // Read in the bytes
    int offset = 0;
    int numRead = 0;
    while ( (offset < bytes.length)
            ( (numRead=is.read(bytes, offset, bytes.length-offset)) >= 0) )
            offset += numRead;
    // Ensure all the bytes have been read in
    if (offset < bytes.length)
      throw new IOException("Could not completely read file " + file.getName());
    is.close();
    return bytes;
public static String printTimeWithMilliSec(long l )
    Date date = new Date( l ) ;
    SimpleDateFormat f = new SimpleDateFormat("HH:mm:ss SSS");
    return f.format(date);
}

Data transfer rate for a single client is unlikely to be effected by using NIO or old blocking IO. The important factor is the maximum transfer rate you can get between the sender and receiver.
You should be able to get 0.5-1.0 MB per second for each 10 Mbit per second of available bandwidth. Your timings suggest you are getting about a 10-20 Mbit/s link speed.

How can utilize/use the extended space in system.img ?

Hello Guru's
In Oracle VM , How can utilize/use the extended space in system.img ?
a) Increased the system.img size using the following command:
# dd if=/dev/zero bs=1M count=12960 >> /OVS/running_pool/18_test1/System.img
b) Verified the added size of system.img file at OVS server.
# ls -lh System.img
-rw-r--r-- 1 root root 19G Feb 9 20:58 System.img
c) Started GVM and additional size/memory is not shown ?
# df -m
Filesystem 1M-blocks Used Available Use% Mounted on
/dev/xvda2 3984 2292 1652 59% /
/dev/xvda1 92 12 75 14% /boot
tmpfs 512 0 512 0% /dev/shm
+ Tried working with resizefs , resize2fs , cmd did not work.
(GVM is created using Oracle provided template)
+ am i missing anything ?
Oracle VM Setup Detail:
oracle-logos-4.9.17-7ovs
enterprise-linux-ovs-5-0.17
ovs-release-2.2-0.17
ovs-utils-1.0-33
kernel-ovs-2.6.18-128.2.1.4.9.el5
ovs-agent-2.3-29
Thanks in advance for your help.
Best Regards
Basu

I am not positive what you did is going to work, but it seems like you did the equivalent of imaging a small disk on a bigger disk. In that case, the first thing to do is update the partition table with fdisk. Start with fdisk -l in the vm for general information about the disk. Hopefully, the additional space will show. Then, work with fdisk to use the extra space. The easiest is to add a partition, then a file system on it. It is also possible to expand the last partition (you might have to delete it first), then expand what is on it (may be RAID, LVM, or the file system), layer by layer. As usual with fdisk, you run the risk of thrashing it all, so you may want to practice on a copy first. Obviously, the extra space can only be added to the last partition of the small disk.
If the situation is more complex, you may have to boot a VM with both the small disk and the big disk at the same time. If you boot the VM off of an iso DVD image, you can then shell out, then run fdisk to partition the big disk the way you want, then use dd to copy the partitions you want in the order you want from the small disk. I am pretty sure not all combinations will work, but you get the idea. You can then take the small disk out, and boot off of the big disk.
Come to think of it, you might just be better off with adding more space as a second virtual disk. You would then be free to partition/format it the way you want without messing with the first disk. Linux is so good with disk management, so many options.
As a general statement, though, I like to put some distance between the high level file systems and the low level disk partitions, so I use LVM (Logical Volume Manager).
Best of luck, keep us posted.

Online Increasing the Size of Ext3 File System (no lvm)

Using Suse linux entreprise Server SP1
Using multpath disks
using a ext3 file system mounted on a partition
How to increase the size of f Ext3 (no lvm) online without umounting the File system ?
a use

On 20/02/2012 10:56, smain09 wrote:
> Using Suse linux entreprise Server SP1
> Using multpath disks
> using a ext3 file system mounted on a partition
> How to increase the size of f Ext3 (no lvm) online without umounting
> the File system ?
> a use
This forum is for queries relating to Novell's Storage Manager product[1].
Storage-related queries for SUSE Linux Enterprise Server should be
posted in the SLES Configure-Administer forum. This recently moved from
forums.novell.com and can now be found @
http://forums.suse.com/forumdisplay....ure-Administer
HTH.
[1] http://www.novell.com/products/storagemanager/
Simon
Novell/SUSE/NetIQ Knowledge Partner
Do you work with Novell technologies at a university, college or school?
If so, your campus could benefit from joining the Novell Technology
Transfer Partner (TTP) program. See novell.com/ttp for more details.

How do I convert img file to VDI

I have downloaded a disk image of Google's Chromium OS (from developer Hexxeh made available at http://download-chromiumos.appspot.com/ I have the 64 bit version) both the files here are downloaded as .img files and Mac OS X says it cannot mount these files I get a warning no mountable file systems. I really need a VDI though I read there is a way to convert an img file in the Terminal to VDI (this is from 2009 though) you enter
VBoxManage convertfromraw -format VDI [filename with extension] [chromiumos]. [filename]vdi it says converting from raw image file but then immediately gives this error:
VBoxManage: error: Cannot open file "[chromiumos_image]": VERR_FILE_NOT_FOUND
Anyone know how I can get this to work or where I can find a working VDI to download that is recent. I have Hexxeh's earlier Chrome OS build 4028 on his site chromeos.hexxeh.net working but it is from April of last year. Any ideas how to get this to work or where to find a working file. I have tried Arnoldthebat's VDI images from November-December 2013 and even newer but they don't work. I'm told since October 13, 2013 future builds of his don't work in VirtualBox. Unfortunately, he doesn't have any older builds available for download to his site. I can only get the November-December 2013 builds or newer 2014 builds.
FYI: My MacBook Pro is now on OS 10.9.2 Mavericks.

This may help:
Frequently asked questions about viewing and syncing video with iTunes and iPod
You can try placing the movie in the Move library of iTunes and selecting it and going to the Advanced tab of iTunes and selecting Create Ipod and iPhone version.
If tha does not work yu will need to use a conversion program like the free Handbrake program. Just Google for it.

How to increase the number of files picked up by File adaptor

Dear all,
Can any one tell me how to increase the number of files picked up by File adapter.
Pl post ASAP.
Useful answers will be appreciated accordingly.
Thanks,
Srinivas

Hi Srinivasa,
there is no parameter for number of files to be picked..............if you have too many source files and you want to get them processed quickly, then you can specify a very small polling interval, then XI will pick your source files quickly..........but it will cause heavy load on the XI system which can lead to blockage of messages in queues........
Regards,
Rajeev Gupta

TS3276 Most attachments from a specific address (work) can not be opened, identified as winmail.data and no data available. Not sure if this is based on the e-mail coming from a windows based system, too old of a windows based system or simply how i have

Most attachments from a specific address (work) can not be opened, identified as winmail.data and no data available. Not sure if this is based on the e-mail coming from a windows based system, too old of a windows based system or simply how i have it set on my Mac.

Brightbleu wrote:
Most attachments from a specific address (work) can not be opened, identified as winmail.data and no data available. Not sure if this is based on the e-mail coming from a windows based system, too old of a windows based system or simply how i have it set on my Mac.
Winmail.data are not usable files. They just preserve RTF within the message.
http://support.microsoft.com/kb/278061
Cheers
Pete

How to use utl_ftp package to transfer files from one system to another

Hi all,
How to use utl_ftp package to transfer files from one system to another using plsql procedure .
I failed to find the appropriate document ,kindly help me .
Thanks,
P Prakash

prakash wrote:
I am sorry tell you, this blog is not enough to for me.It's not a blog, it's Chris' website where you download the package from. Once you download the package and unrar it, then the package spec gives instructions (and I think there's instructions on how to install it too).
Kindly let me know if there is any oracle documentation for this .It's not an Oracle created package, it was created by Chris. It's based around the UTL_TCP package if you really want to get into the nitty gritty of how it works, but I don't think you do.

How to prevent oraarch folder increasing in XI system ?

How can I prevent oraarch folder increasing in XI system ?
I don't need files created in oraarch.So I delete periodicly that files
Thanks

Hi,
<b>DO NOT</b> delete archive log files without making a backup <b>FIRST</b>.
It is possible that you need those files in the future.
You can use BRARCHIVE to schedule periodical backup+delete of the files.

How to increase LVM based System.img file ?

Similar Messages

Maybe you are looking for