How to increase SyncMaxWaitTime property at BPEL process level

Hi,
I want to increase SyncMaxWaitTime property specific to my BPEL process to avoid timeout for a request/response operation. Example: Invoking a plsql procedure from BPEL is taking much time to send response back than the timeout set in server.
Thanks in advance

Hi,
I have changed the synmaxwaitTime in Server as you said...
So if i said to 900, And in a Simple request/reply process, i am waiting for 10 minutes, the process is timing out after 303 seconds. If i wait for 300 seconds, its getting executed successfully. Can you tell what its exactly happening ?
Thanks,
N

Similar Messages

How to design multiple file polling BPEL process?

Hi all,
I am trying to solve/design the following in BPEL process:
- The integration process flow I am trying to design is an interaction b/n system A (FTP server), an Integration platform and system B.
- The integration platform will poll files from an internal FTP server. It has 2 Time files (“Time1” and “Time2”) alternatives to poll from the FTP server. It will then transform the message/information inside the files (time information) to an internal XML format. At the end it shall send the message to system B.
- The information inside the files is identical. The reason to have 2 files with identical information is for redundancy. The integration-platform shall only poll file “TIME1” as long as the conditions are met. If the conditions are not met, then it polls file “Time2”.
Normal succeeded scenario:
1- The integration platform polls the latest “Time1” file from the internal FTP server. The polling is done every 15th minute.
2- The integration platform logs to BAM and reports that the file is received.
3- The platform then converts the message to an internal format.
4- The platform sends the converted message/time information to system B.
5 - The use-case ends.
Not normal scenario:
1- The platform cannot get/receive file “Time1” file.
- The platform logs to BAM and reports that the file could not be received.
- The platform polls file “Time2” from the FTP server and it does the same normal scenario as above. The use case ends.
2 - Time message/information from the Time1 file has not full information (less than 24 rows). The file is supposed to have 24 rows (for 24 hours).
- The platform logs to BAM and reports that there is missing information on the message.
- The platform gets/polls instead the “Time2” file from the FTP server and it does the normal scenario.
- The use case ends.
3- The platform can find/get neither file “Time1” nor “Time2”.
- The platform alarms to BAM that it could not get/find the files.
** I am considering either the pick activity or the switch activity solution. Does any one of you have an idea how to design this in oracle BPEL process?
Thanks.

Not sure I understand your use case completly so if I'm off track I apploigise.
I think there are 3 ways to solve this. The 3rd may be closest to what you are looking for.
1. Have 2 processes that read into a common area, e.g. database where you can compare. From there you can choose which file to pick. This is high leve but I think this would be dificult to implement.
2. Implement a combination of a rejectedMessage handler and error processing witn the BPEL process itself. The rejecte message handler can call another BPEL process if the time1 file is in a invalid state. This process will then read the time2 file. The issue with this is that the rejecte message handler will only get invoked when the file doesn't conform to the schema.
3. Use the quarts scheduler whcih invokes a BPEL process every 15 miniutes. Using the file adapter to perform a synchronous read to read time1, analyse it, if it fails read time2 using synchronous read. Then perform the approprate action id this fails.
hope this give some ideas.
cheers
James

How to config the proxy of Bpel process manager(with password)

HI, i met the quetion as below
The The Oracle BPEL Process Designer & Manager server is installed on my computer in domin of my company, so if One of the BPEL processes deployed on the BPEL server needs to access a synchronous Web service hosted outside the firewall .i need to config the proxy, but the proxy of my company needs my ID and password to access outside . after I congfig the proxy
option of designer and build the Process, there will be pop-up a dialog box and ask for my ID & password .But how i config the proxy of Bpel process manager?? I read the tecnote about HTTP Proxy Configuration and config the proxy in the obsetenv.bat ,but it seems has no information about my ID&password in obsetenv.bat.
The question is How can i let the Bpel process manager know my proxy and ID&password ?? pls help me ,thx!

I have set these value in obsetenv.bat as follows, and I restart the Bpel manager server and designer.
but the same issue still occur:
set OB_JAVA_PROPERTIES="-Djavax.wsdl.factory.WSDLFactory=oracle.j2ee.ws.wsdl.factory.WSDLFactoryImpl" "-Dhttp.proxySet=true" "-Dhttp.proxyHost=pxysha" "-Dhttp.proxyPort=8080" "-Dhttp.proxyUser=oocldm\hanfi" "-Dhttp.proxyPassword=123456" "-Dhttp.nonProxyHosts=localhost".
At the same time, I have set proxy server in bpel designer of eclipse, after I build the process,it can works well(which display BUILD SUCCESSFUL), but the bpel server display error message as below :
Exception Name:
Failed to read wsdl
Exception Description:
Error happened when reading wsdl at "C:\orabpel\domains\default\tmp\.bpel_TerraFlow_1.0.jar\TerraServiceRef.wsdl", because "WSDLException: faultCode=PARSER_ERROR: Error reading file: Server returned HTTP response code: 407 for URL: http://terraserver.microsoft.com/TerraService.asmx?WSDL".
what happen ?

How to overiride SyncMaxWaitTime for one BPEL

We have SyncMaxWaitTime set to default 45s. It is good most of the BPELs. But we have one Sync BPEL which needs to run more than 45s.
Is there any way we can override SyncMaxWaitTime just for one BPEL?
We need all other BPELs time out for 45s, so we did not want to set SyncMaxWaitTime at global level.
Any help is appricated..

Hi,
This is not possible. SyncMaxWaitTime is applicable globally only.
Usually you shouldn't be having a Sync process that waits so long. You can consider changing your process to an Asysnchronous one if this is the case or if there is minor difference, you can increase the SyncMaxWaitTime for all the processes.
Regards
Neeraj Sehgal

Question about the usage of wsdlRuntimeLocation property in BPEL process

Hi,
I have a BPEL process P1. And then I also have a BPEL process P2. Within P2, I invoke the process P1 using P1.wsdl in the following way -
<partnerLinkBinding name="WshGetRefDataPL">
<property name="wsdlLocation">http://rvishnuv-PC2:9700/orabpel/default/WshSendLocRefDataToOtm/WshSendLocRefDataToOtm?wsdl</property>
</partnerLinkBinding>
Then I tried adding the following property -
<property name="wsdlRuntimeLocation">${domain_url}/WshSendLocRefDataToOtm/WshSendLocRefDataToOtm?wsdl</property>
Then, when I try to deploy my process P2 after adding this in my bpel.xml I keep getting the error -
Error:
[Error ORABPEL-10903]: failed to read wsdl
[Description]: in "bpel.xml", Error loading schemas from wsdl.
Error while loading schemas from wsdl file at location "file:/H:/jdevhome/jdev/mywork/BPELProj/WshSendRefDataStlToOtm/WshSendRefDataStlToOtm.wsdl". The reason is The specified network name is no longer available.
Please verify the schemas defined in wsdl.
[Potential fix]: If your site has a proxy server, then you may need to configure your BPEL Server, designer and browser with your proxy server configuration settings (see tech note on http://otn.oracle.com/bpel for instructions).
I also tried - <property name="wsdlRuntimeLocation">${domain_url}/WshSendLocRefDataToOtm/WshSendLocRefDataToOtm?wsdl/1.0</property>
With this change, the process P2 gets deployed successfully, but I am running into the following runtime issue -
<remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
<part name="code">
<code>WSDLReadingError</code>
</part>
<part name="summary">
<summary>Failed to read wsdl. Failed to read wsdl at "http://rvishnuv-PC2:9700/orabpel/default/WshSendLocRefDataToOtm/WshSendLocRefDataToOtm?wsdl/1.0", because "WSDLException: faultCode=INVALID_WSDL: The document: http://rvishnuv-PC2:9700/orabpel/default/WshSendLocRefDataToOtm/WshSendLocRefDataToOtm?wsdl/1.0 is not a wsdl file or does not have a root element of "definitions" in the "http://schemas.xmlsoap.org/wsdl/" namespace or the "http://www.w3.org/2004/08/wsdl" namespace.". Make sure wsdl is valid. You may need to start the OraBPEL server, or make sure the related bpel process is deployed correctly.</summary>
</part>
</remoteFault>
I have also pasted process P2's bpel.xml below.
Can you please let me know what I might be missing here?
Thanks a lot for your help.
Thanks
Ravi
<?xml version = '1.0' encoding = 'UTF-8'?>
<BPELSuitcase>
<BPELProcess id="WshSendRefDataStlToOtm" src="WshSendRefDataStlToOtm.bpel">
<partnerLinkBindings>
<partnerLinkBinding name="client">
<property name="wsdlLocation">WshSendRefDataStlToOtm.wsdl</property>
</partnerLinkBinding>
<partnerLinkBinding name="WshGetRefDataPL">
<property name="wsdlLocation">http://rvishnuv-PC2:9700/orabpel/default/WshSendLocRefDataToOtm/WshSendLocRefDataToOtm?wsdl</property>
<property name="wsdlRuntimeLocation">${domain_url}/WshSendLocRefDataToOtm/WshSendLocRefDataToOtm?wsdl</property>
</partnerLinkBinding>
<partnerLinkBinding name="SendRefDataToGC3PL">
<property name="wsdlLocation">GLogXML.wsdl</property>
</partnerLinkBinding>
</partnerLinkBindings>
</BPELProcess>
</BPELSuitcase>

there is a nice article on this issue.
http://www.oracle.com/technology/products/ias/bpel/pdf/bpel-admin-webinar.pdf
Try another property to see if you have the same issue:
Deployment in 10.1.2, String substitution, Only have support for:
server_url
domain_url
suitcase_url
suitcase_path
bpel.xml
<BPELSuitcase>
<BPELProcess id="OrderBooking" src="OrderBooking.bpel">
<partnerLinkBindings>
<partnerLinkBinding name="CreditRatingService">
<property name="wsdlLocation">
http://$(server_url)/orabpel/default/CreditRatingService?wsdl
</property>
</partnerLinkBinding>
</partnerLinkBindings>
</BPELProcess>
</BPELSuitcase>

How to Upload a File in Bpel Process using JSP

I am trying to upload file in bpel process using front end as a Jsp.
i create the jsp page and i am able to pass the value from jsp to bpel process.
In bpel process i don't know how to pass or assign the specified file name into file adapter for reading the files.
Please help me...
Saravanan

You don't assign the url of the file to it.
To either get the data from the file into the bpel process you could use the url-parameter together with the ora:readFile function....or you could let your web-application upload the file to some location on the server...and on this location you could use the file-adapter together with the polling, to start your bpel process.

How to insert security headers thru BPEL Process

I am new to BPEL process creation and stuff, but I need to complete a task in which I need
1.Create a BPEL process which accepts Username and password and set it into the soap request header as follows;
<soapenv:Header>
<wsse:Security soapenv:mustUnderstand="1"
xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecuri
ty-secext-1.0.xsd">
<wsse:UsernameToken wsu:Id="UsernameToken-24438666"
xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurit
y-utility-1.0.xsd">
<wsse:Username>Username </wsse:Username>
<wsse:Password
Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token
-profile-1.0#PasswordDigest">password </wsse:Password>
<wsse:Nonce>syVMUbFNvaQAfQaDpVDolA==</wsse:Nonce>
<wsu:Created>2009-03-25T22:55:51Z</wsu:Created>
</wsse:UsernameToken>
</wsse:Security>
</soapenv:Header>
Can you please let me know what all steps I need follow in order to introduce the soap:header with wsse :security header settings. I am using 10.1.2.
I tried to do it by importing a schema wsse.xsd into my WSDL file. and in bpel.xml I set the properties as follows,
<property name="wsdlLocation">AccruentService.wsdl</property>
<property name="wsseUsername">username</property>
<property name="wssePassword">password</property>
<property name="wsseHeaders">credentials</property>
but does not put in the required header.
I dont know if I need to do anything else, Please help.

Hi,
Thanks for the quick reply.
I tried doing he same as mentioned in the link that u provided, but I got struck at this;
I did not understand why we are doing this;
<bpelx:insertAfter>
<bpelx:from variable="pswd" query="/wsse:Password"/>
<bpelx:to variable="userNameToken" query="/wsse:UsernameToken/wsse:Username"/>
</bpelx:insertAfter>
<bpelx:append>
<bpelx:from variable="userNameToken" query="/wsse:UsernameToken"/>
<bpelx:to variable="securityContext" query="/wsse:Security"/>
</bpelx:append>
after doing this and deploying, my request when tested thru SOAPUI looks like this with not security headers
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:add="http://schemas.xmlsoap.org/ws/2003/03/addressing" xmlns:acc="http://www.accruent.com/">
<soapenv:Header>
<add:MessageID>?</add:MessageID>
<add:ReplyTo>
<add:Address>?</add:Address>

<add:ReferenceProperties>

</add:ReferenceProperties>

<add:PortType>?</add:PortType>

<add:ServiceName PortName="?">?</add:ServiceName>

</add:ReplyTo>
</soapenv:Header>
<soapenv:Body>
....I just removed so that it is short
</soapenv:Body>
</soapenv:Envelope>
the service which I am invoking should

How to obtain response from asyn bpel process invoked through java

I need to get the response from Asynchronous bpel process which im invoking through java using DeliveryPost method whose return type is void.

I was able to write java code for the above process
the code is here
NormalizedMessage nm = new NormalizedMessage( );
String uniqueBpelId = com.collaxa.cube.util.GUIDGenerator.generateGUID();
java.util.Map msgProps = new HashMap();
// NormalizedMessage res = deliveryService.request("OraFormsService", "initiate", nm);
//deliveryService.post(null,null,null,null);
msgProps.put("conversationId",uniqueBpelId);
nm.setProperty("conversationId",uniqueBpelId);//to set the property for this message
nm.addPart("payload",xml1);//to add to the payload of this message
deliveryService.post("OraFormsService", "initiate", nm);
// System.out.println("con1 "+IDeliveryConstants.STATE_HANDLED);
StringBuffer buf = new StringBuffer();
WhereCondition cond;
cond = new WhereCondition(buf.append(SQLDefs.IM_state).append( " = " ).append(IDeliveryConstants.STATE_UNRESOLVED ).toString() );
//cond = WhereConditionHelper.whereInstancesOpen();
IInvokeMetaData imd[] = locator.listInvokeMessages(cond);
String ids[] = new String[imd.length];
// print out the partial process information
// for processes in manual recovery status on invoke
for (int i = 0; i < imd.length; i++)
System.out.println("ConversationId=" +
imd.getConversationId());
System.out.println("ProcessId=" +
imd[i].getProcessId());
System.out.println("State=" + imd[i].getState());
ids[i] = imd[i].getConversationId();
Thanks for the Help

How to configure JBoss for Oracle BPEL Process Manager

an any body tell me , how to configure JBoss4.0.5 for Oracle BPEL Process Manager?

http://download.oracle.com/docs/cd/E10291_01/doc.1013/e10538/toc.htm

How to create a proxy of BPEL process(to initiate it) in Jdeveloper 11G

Hi All,
I am badly stuck in creating proxy of BPEL process developed in Jdeveloper 10G. It was working fine in 10G. But in 11G I am not able to do it. Even creating a
JAX-RPC mapping file is disabled in 11G. So could any one help me out. Even I want to know is there any other process to initiate a BPEL process from 11G. It's very URGENT
so please help me out.
Thanks in Advance.

Hi,
JDeveloper 11g had four technology preview releases (they came with OC4J instead of WebLogic) before production, TP4 is the forth, and SOA components came with it (not out-of-the-box, but had to be installed) including BPEL engine.
Start from here , there is a metalink note no. 565899.1 where you can find the instructions for installing SOA on JDeveloper 11g TP4.
So, you need to:
- download and install [JDeveloper 11g TP4|http://www.oracle.com/technology/software/products/jdev/htdocs/soft11tp.html]
- install SOA on it (instructions on metalink)
I used JDeveloper 11g R1 for my application because TP4 had some bugs when working with asynchronous web services.
Ask away if you have any problems.
Pedja

How to convert BPA model to BPEL process flow?

Hi All,
I am looking for documentation which explains below concepts
1. Converting BPA model into a BPEL process
2. Just wanted to add single human task definition from BPA model to BPEL process
Can anybody please point me to correct documentation?
Regards,
Praveen

Hi Don,
you can perform this task with ASSIGN activity.
For example, you have two variable V_ENV_TYPE (with type of environment) and V_TEXT ("Failed mapping <mapping name>"). Define additinal variable V_NEW_TEXT, bind Variable parameter of Assign activity to V_NEW_TEXT variable and define value in Assign activity as
V_ENV_TYPE || ' ' || V_TEXTRegards,
Oleg

How to enable https in Oracle BPEL Process Manager 10.1.2

Hi,
I have a few security related questions surrounding BPEL process manager.
1. Does the BPEL engine have the capability to invoke a web service using https (HTTP over SSL)? Does it automatically do that if partner link URI starts with https:// ?
2. If not, what needs to be done to enable accessing a https based web service?
Thanks,
Vidya

Eric,
I had applied the steps specified in the URL and modified the files default-web-site.xml, secure-web-site.xml and server.xml in directory Ora_Home\j2ee\home\config. Able to invoke the application deployed in Ora_Home\j2ee\home\applications successfully using https.
For securing BPEL process I had followed the same steps by modifying files default-web-site.xml, secure-web-site.xml and server.xml in directory Ora_Home\j2ee\OC4J_BPEL\config. While invoking the BPEL Processes using https protocol I am facing error “HTTP 500 - Internal server error”, after the security alert popup.
Do I need to do any other configurations for securing BPEL processes deployed in Ora_Home\integration\orabpel\domains\default\deploy directory?
Please assist me on this.
Thanks,
Vidya

How to establish WS Security for BPEL processes running on Web Logic

We are running SOA Suite 10.1.3.4 on Web Logic Server 9.2.
I have built BPEL processes and now want to implement WS Security for them, "Wssp1.2-Wss1.0-UsernameToken-Plain-X509-Basic256.xml" in particular. Have been researching but could not find any document for a Web Logic scenario; can any of you please give me some directions or blogs which might be helpul.
Appreciate your help in advance.
Thanks!

Hi
Check the Link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/526bd490-0201-0010-038e-d3ff7eb1d16e
Regards ,
Venkat

How to test Performance of a bpel process

Hi All,
Pls let me know know how to do performance testing in BPEL?
Thanks,
ChitraDevi

Hi ChitraDevi,
In em select your application server and in that you will find Home,Applications,Performance...etc
Under Home tab and Performance tab you can find some graphs and in Performance tab you can find a link called JVM metrics. In that also you can find some thing.
And you can observe metrics by using JConsole (you have to download this software)... through which also you can observe the things
Regards
PavanKumar.M

TimeOut Property in BPEL

Hi,
We have a requirement to Indroduce a Timeout Property to 60 secs at BPEL Process level. Usually TimeOut Property will be placed at Partner Link level. Is there any way to introduce the Timeout Property at BPEL Process level? We can change the BPEL Property in BPEL Console but it will apply this property for all the BPEL processes deployed in the instance.
Any help on this will be highly helpful.
Thanks,
Saravana

Hi:
Is it for BPEL 10g?
If it so, take a look to the BPEL Best Practices Guide http://download.oracle.com/technology/tech/soa/soa_best_practices_1013x_drop3.pdf
there is a very clear explanation about the time out parameters.
thx
best

How to increase SyncMaxWaitTime property at BPEL process level

Similar Messages

Maybe you are looking for