How To Increase The height of a line dynamically
Dear all,
In a table I am using expand to fit height for the text fields in the table.It's working fine.But the height of the partition lines of the table which divide the columns are not increasing.
I have taken the rows of the table as different subform.I have written the following script on the exit event of the each subform to increase the height of the lines but it's not working.
var fieldHeight = xfa.layout.h(xfa.form.form1.page1.subformname, "in");
Line1.h = fieldHeight;
Line2.h = fieldHeight;
How can I do it?If any body can please help me.It's very urgent.
Thanks a lot in advance
Regards
Rakesh
I'm after pretty much the same thing too.
I have a table of text fields which are all set to vertically expand to fit. If you enter data into 1 and make it expand vertically, none of the other fields in that row expand with it. This results in table rows looking uneven.
I looked into using the 'h' property, but it doesn't seem to work. If you set up a field that displays the h value of another field it never budges from '0in', regardless of the field's height.
I'd also be grateful for any ideas.
Cheers,
Craig
Similar Messages
-
How to increase the height of a tabbed layout
How to increase the height of a tabbed layout? I do have a form inside a panelTabbed layout which is not fitting inside.Is there any css class available ?
Thanks
SuneeshHi,
+"My panel tabbed layout is inside a detailStamp facet of a table"+
you can set the StretchChildren property on the ShowDetailItem components to make the panel tab to resize the contained children. I set the inline style on a paneltab and the result shows in the rendered output
Frank -
How to increase the length of internal table dynamically
How to increase the length of internal table dynamically depending on the number of fields fetched into the internal table ?
The requirement code :
types: begin of t_data,
form like zscr_data_hdr-form,
werks like zscr_data_hdr-werks,
matnr like zscr_data_hdr-matnr,
verid like zscr_data_hdr-verid,
lot like zscr_data_hdr-lot,
lot_qty like zscr_data_hdr-lot_qty,
udate like zscr_data_hdr-udate,
utime like zscr_data_hdr-utime,
zuser like zscr_data_hdr-zuser,
processed like zscr_data_hdr-processed,
defect like zscr_defect_data-defect,
vornr like zscr_route_data-vornr,
fld1 like zscr_defect_data-defect_val,
fld2 like zscr_defect_data-defect_val,
fld3 like zscr_defect_data-defect_val,
fld4 like zscr_defect_data-defect_val,
fld5 like zscr_defect_data-defect_val,
fld6 like zscr_defect_data-defect_val,
fld7 like zscr_defect_data-defect_val,
fld8 like zscr_defect_data-defect_val,
fld9 like zscr_defect_data-defect_val,
fld10 like zscr_defect_data-defect_val,
fld11 like zscr_defect_data-defect_val,
fld12 like zscr_defect_data-defect_val,
fld13 like zscr_defect_data-defect_val,
fld14 like zscr_defect_data-defect_val,
fld15 like zscr_defect_data-defect_val,
fld16 like zscr_defect_data-defect_val,
fld17 like zscr_defect_data-defect_val,
fld18 like zscr_defect_data-defect_val,
fld19 like zscr_defect_data-defect_val,
fld20 like zscr_defect_data-defect_val,
fld21 like zscr_defect_data-defect_val,
fld22 like zscr_defect_data-defect_val,
fld23 like zscr_defect_data-defect_val,
fld24 like zscr_defect_data-defect_val,
fld25 like zscr_defect_data-defect_val,
fld26 like zscr_defect_data-defect_val,
fld27 like zscr_defect_data-defect_val,
fld28 like zscr_defect_data-defect_val,
fld29 like zscr_defect_data-defect_val,
fld30 like zscr_defect_data-defect_val,
fld31 like zscr_defect_data-defect_val,
fld32 like zscr_defect_data-defect_val,
fld33 like zscr_defect_data-defect_val,
fld34 like zscr_defect_data-defect_val,
fld35 like zscr_defect_data-defect_val,
fld36 like zscr_defect_data-defect_val,
fld37 like zscr_defect_data-defect_val,
fld38 like zscr_defect_data-defect_val,
fld39 like zscr_defect_data-defect_val,
fld40 like zscr_defect_data-defect_val,
fld41 like zscr_defect_data-defect_val,
fld42 like zscr_defect_data-defect_val,
fld43 like zscr_defect_data-defect_val,
fld44 like zscr_defect_data-defect_val,
fld45 like zscr_defect_data-defect_val,
fld46 like zscr_defect_data-defect_val,
fld47 like zscr_defect_data-defect_val,
fld48 like zscr_defect_data-defect_val,
fld49 like zscr_defect_data-defect_val,
fld50 like zscr_defect_data-defect_val,
fld51 like zscr_defect_data-defect_val,
fld52 like zscr_defect_data-defect_val,
fld53 like zscr_defect_data-defect_val,
fld54 like zscr_defect_data-defect_val,
fld55 like zscr_defect_data-defect_val,
fld56 like zscr_defect_data-defect_val,
fld57 like zscr_defect_data-defect_val,
fld58 like zscr_defect_data-defect_val,
fld59 like zscr_defect_data-defect_val,
fld60 like zscr_defect_data-defect_val,
fld61 like zscr_defect_data-defect_val,
fld62 like zscr_defect_data-defect_val,
fld63 like zscr_defect_data-defect_val,
fld64 like zscr_defect_data-defect_val,
fld65 like zscr_defect_data-defect_val,
fld66 like zscr_defect_data-defect_val,
fld67 like zscr_defect_data-defect_val,
fld68 like zscr_defect_data-defect_val,
fld69 like zscr_defect_data-defect_val,
fld70 like zscr_defect_data-defect_val,
fld71 like zscr_defect_data-defect_val,
fld72 like zscr_defect_data-defect_val,
fld73 like zscr_defect_data-defect_val,
fld74 like zscr_defect_data-defect_val,
fld75 like zscr_defect_data-defect_val,
fld76 like zscr_defect_data-defect_val,
fld77 like zscr_defect_data-defect_val,
fld78 like zscr_defect_data-defect_val,
fld79 like zscr_defect_data-defect_val,
fld80 like zscr_defect_data-defect_val,
fld81 like zscr_defect_data-defect_val,
fld82 like zscr_defect_data-defect_val,
fld83 like zscr_defect_data-defect_val,
fld84 like zscr_defect_data-defect_val,
fld85 like zscr_defect_data-defect_val,
fld86 like zscr_defect_data-defect_val,
fld87 like zscr_defect_data-defect_val,
fld88 like zscr_defect_data-defect_val,
fld89 like zscr_defect_data-defect_val,
fld90 like zscr_defect_data-defect_val,
fld91 like zscr_defect_data-defect_val,
fld92 like zscr_defect_data-defect_val,
fld93 like zscr_defect_data-defect_val,
fld94 like zscr_defect_data-defect_val,
fld95 like zscr_defect_data-defect_val,
fld96 like zscr_defect_data-defect_val,
fld97 like zscr_defect_data-defect_val,
fld98 like zscr_defect_data-defect_val,
fld99 like zscr_defect_data-defect_val,
fld100 like zscr_defect_data-defect_val,
fld101 like zscr_defect_data-defect_val,
fld102 like zscr_defect_data-defect_val,
fld103 like zscr_defect_data-defect_val,
fld104 like zscr_defect_data-defect_val,
fld105 like zscr_defect_data-defect_val,
fld106 like zscr_defect_data-defect_val,
fld107 like zscr_defect_data-defect_val,
fld108 like zscr_defect_data-defect_val,
fld109 like zscr_defect_data-defect_val,
fld110 like zscr_defect_data-defect_val,
fld111 like zscr_defect_data-defect_val,
fld112 like zscr_defect_data-defect_val,
fld113 like zscr_defect_data-defect_val,
fld114 like zscr_defect_data-defect_val,
fld115 like zscr_defect_data-defect_val,
fld116 like zscr_defect_data-defect_val,
fld117 like zscr_defect_data-defect_val,
fld118 like zscr_defect_data-defect_val,
fld119 like zscr_defect_data-defect_val,
fld120 like zscr_defect_data-defect_val,
fld121 like zscr_defect_data-defect_val,
fld122 like zscr_defect_data-defect_val,
fld123 like zscr_defect_data-defect_val,
fld124 like zscr_defect_data-defect_val,
fld125 like zscr_defect_data-defect_val,
fld126 like zscr_defect_data-defect_val,
fld127 like zscr_defect_data-defect_val,
fld128 like zscr_defect_data-defect_val,
fld129 like zscr_defect_data-defect_val,
fld130 like zscr_defect_data-defect_val,
fld131 like zscr_defect_data-defect_val,
fld132 like zscr_defect_data-defect_val,
fld133 like zscr_defect_data-defect_val,
fld134 like zscr_defect_data-defect_val,
fld135 like zscr_defect_data-defect_val,
dayst like zscr_data_hdr-dayst,
end of t_data.
In this fld1 to fld135 are defined in internal table.
But if the number of fields are more than 135 then the program is going to short dump.
Some times fld1 to fid170 or more fields will be there in my internal table.
Please suggest me how to make my requirement dynamic and display this data fetched into this internal table onto a .XLS file in the presentation server ?Hi
You can try to use the type string:
form like zscr_data_hdr-form,
werks like zscr_data_hdr-werks,
matnr like zscr_data_hdr-matnr,
verid like zscr_data_hdr-verid,
lot like zscr_data_hdr-lot,
lot_qty like zscr_data_hdr-lot_qty,
udate like zscr_data_hdr-udate,
utime like zscr_data_hdr-utime,
zuser like zscr_data_hdr-zuser,
processed like zscr_data_hdr-processed,
defect like zscr_defect_data-defect,
vornr like zscr_route_data-vornr,
fieldxx type string,
dayst like zscr_data_hdr-dayst,
end of t_data.
So you can save you informations of every fld<n> concatenating their values into fieldxx.
Max -
How to increase the height of the text field in Adobe Central
How do I increase the height of the text field in Adobe Central? I know how to change the font size but visually the height of the text field (<0.5cm) looks too small.
I want to be able to print the form and fill it out by hand. But the text field height is too small.
Please help.
Thanks
GenHi;
Are you saving your form as a PDF from FormsCentral to distribute the PDF form?
In the FormsCentral form authoring tools you do not have control over the size of the field. If you are using a PDF however you can edit that PDF in Acrobat after saving from FormsCentral and can edit the size, border, color etc of the fields.
If you want to edit a FormsCentral PDF you'll want to review this FAQ:
http://forums.adobe.com/docs/DOC-3661
Thanks,
Josh -
How to set the height of a textarea dynamically
Hi,
I have been trying to set the ui.textarea's height dynamically and I am not able to do it. This is what I am doing.
<ui:textArea binding="#{assignment$EditResult.textArea2}" id="textArea2" style="height: 90%" text="#{currentRow.value['comments']}"/>
The height is being ignored and it is set to the default size. How can I set the height of this component to fit to the size of its cell, which is dynamic?
Thanks for your help.Thank you for your help! It worked for something like this:
getTextArea2().setStyle("color : red");
but this does not work still.
getTextArea2().setStyle("height: 90%");
I think it still does not know the size of the cell at this point yet. But this is a good tip, thanks anyway!
~Kazzie -
How to change the height of a folder dynamically?
Hello everyone!
I have a detail, I want to make when selecting a tab of a folder, this change in height, then select another tab to return to its original height.
I'm trying so:
Private Sub Folder5_ClickAfter(sboObject As Object, pVal As SAPbouiCOM.SBOItemEventArg) Handles Folder5.ClickAfter
oForm = Application.SBO_Application.Forms.Item(pVal.FormUID)
oForm.Freeze(True)
Me.Folder5.Item.Height = 298
Me.Folder3.Item.Height = 298
Me.Matrix1.Item.Height = 263
Me.Matrix0.Item.Height = 113
Me.Matrix0.Item.Top = 345
oForm.Freeze(False)
End Sub
But I would not change the height of the folder (it does with the other elements).
Before:
After:
Any suggestions?Already achieve that works to change the height of a tab, do not change the folder specified, change the height of the GROUPER containing folders.
It worked like this:
Private Sub Folder5_ClickAfter(sboObject As Object, pVal As SAPbouiCOM.SBOItemEventArg) Handles Folder5.ClickAfter
oForm = Application.SBO_Application.Forms.Item(pVal.FormUID)
oForm.Freeze(True)
oItem = oForm.Items.Item("Item_32") 'This is the ITEM_ID the GROUPER containing folders
oItem.Height = 298
oFolder = oItem.Specific
Me.Matrix1.Item.Height = 263
Me.Matrix0.Item.Height = 113
Me.Matrix0.Item.Top = 345
oForm.Freeze(False)
End Sub -
How to Increase the Number of Rows/Lines in a document
Dear Experts,
I have pre printed stationary that prints only 5 rows before moving to the next page. How can I increase this to 10 lines or more ?
RegardsHi Martin,
Which layout is this? Is it the Cheque For Payment? If it is, there is a setting to determine the max lines per page and even if you change the repetitive area setting it will still only print 5 lines.
The setting is in:
Administration / System Initialisation / Print Preferences.
On the Per Document tab, select Cheque For Payment. Change the Maximum Lines field.
If it is not Cheque For Payment, try Jimmys solution. The amount of rows though, is also dependant upon things such as the size of your page headers and footers and how much space is left after they have printed, so if you still can't get more lines per page, make those smaller.
Regards,
Adrian -
Is it possible to increase the height of the Push button in a screen?
Dear All,
Is it Possible to increase the height of the Push button in a screen (Module Pool Programming)?
Is it possible to increase the font size of the characters in a screen (Module Pool Programming)?Hi Vijay,
My question is.. I want to know whether it is possible to increase the height of the Push button in a screen. If it is possible, How to increase the height of the Push button? -
I want to make the item text of the combobox to be aligned vertically(Centred) . Actually I increased the height
of the combobox and after the increasing the combobox height, the text is not centred vertically.The code
snippet for increasing the height is as follows,
m_SpecifyCombo.SetItemHeight(-1,20);//CCombobox m_SpecifyCombo
After increasing the height the text in the combobox is not in the centre as shown in the below image,
But I want the text to be centred as shown in the below image.
Code snippet for owner drawn combobox:
#if !defined(AFX_CUSTCOMBOBOX_H__F8528B4F_396E_11D1_9384_00A0248F6145__INCLUDED_)
#define AFX_CUSTCOMBOBOX_H__F8528B4F_396E_11D1_9384_00A0248F6145__INCLUDED_
#if _MSC_VER >= 1000
#pragma once
#endif // _MSC_VER >= 1000
typedef enum {FONTS} STYLE; //Why have I enumerated, Cos, Maybe I might want something other than Fonts here
class COwnerDrawCombo : public CComboBox
// Construction
public:
COwnerDrawCombo();
COwnerDrawCombo (STYLE);
// Attributes
public:
void SetHilightColors (COLORREF hilight,COLORREF hilightText)
m_clrHilight = hilight;
m_clrHilightText = hilightText;
void SetNormalColors (COLORREF clrBkgnd,COLORREF clrText)
m_clrNormalText = clrText;
m_clrBkgnd = clrBkgnd;
static BOOL CALLBACK EnumFontProc (LPLOGFONT lplf, LPTEXTMETRIC lptm, DWORD dwType, LPARAM lpData);
void FillFonts ();
int GetSelFont (LOGFONT&);
// Operations
public:
// Overrides
// ClassWizard generated virtual function overrides
//{{AFX_VIRTUAL(CCustComboBox)
public:
virtual void DrawItem(LPDRAWITEMSTRUCT lpDrawItemStruct);
virtual void MeasureItem(LPMEASUREITEMSTRUCT lpMeasureItemStruct);
protected:
virtual void PreSubclassWindow();
//}}AFX_VIRTUAL
// Implementation
public:
virtual ~COwnerDrawCombo();
// Generated message map functions
protected:
STYLE m_enStyle;
COLORREF m_clrHilight;
COLORREF m_clrNormalText;
COLORREF m_clrHilightText;
COLORREF m_clrBkgnd;
BOOL m_bInitOver;
void DrawDefault (LPDRAWITEMSTRUCT);
void DrawFont(LPDRAWITEMSTRUCT);
void InitFonts ();
//{{AFX_MSG(CCustComboBox)
afx_msg int OnCreate(LPCREATESTRUCT lpCreateStruct);
afx_msg void OnDestroy();
//}}AFX_MSG
afx_msg long OnInitFonts (WPARAM, LPARAM);
DECLARE_MESSAGE_MAP()
//{{AFX_INSERT_LOCATION}}
// Microsoft Developer Studio will insert additional declarations immediately before the previous line.
#endif //!defined(AFX_CUSTCOMBOBOX_H__F8528B4F_396E_11D1_9384_00A0248F6145__INCLUDED_)
// OwnerDrawCombo.cpp : implementation file
#include "stdafx.h"
#include "combobox.h"
#include "OwnerDrawCombo.h"
#ifdef _DEBUG
#define new DEBUG_NEW
#undef THIS_FILE
static char THIS_FILE[] = __FILE__;
#endif
#define WM_INITFONTS (WM_USER + 123)
//I chose 123 cos nobody might use the same exact number.. I can improve this by use RegisterWindowMessage..
// COwnerDrawCombo
//Initial values of the text and highlight stuff
COwnerDrawCombo::COwnerDrawCombo()
m_enStyle = FONTS;
m_clrHilight = GetSysColor (COLOR_HIGHLIGHT);
m_clrNormalText = GetSysColor (COLOR_WINDOWTEXT);
m_clrHilightText = GetSysColor (COLOR_HIGHLIGHTTEXT);
m_clrBkgnd = GetSysColor (COLOR_WINDOW);
m_bInitOver = FALSE;
COwnerDrawCombo::COwnerDrawCombo (STYLE enStyle)
m_enStyle = enStyle;
m_clrHilight = GetSysColor (COLOR_HIGHLIGHT);
m_clrNormalText = GetSysColor (COLOR_WINDOWTEXT);
m_clrHilightText = GetSysColor (COLOR_HIGHLIGHTTEXT);
m_clrBkgnd = GetSysColor (COLOR_WINDOW);
m_bInitOver =FALSE;
COwnerDrawCombo::~COwnerDrawCombo()
BEGIN_MESSAGE_MAP(COwnerDrawCombo, CComboBox)
//{{AFX_MSG_MAP(COwnerDrawCombo)
ON_WM_CREATE()
ON_WM_DESTROY()
//}}AFX_MSG_MAP
ON_MESSAGE (WM_INITFONTS,OnInitFonts)
END_MESSAGE_MAP()
// COwnerDrawCombo message handlers
void COwnerDrawCombo::DrawItem(LPDRAWITEMSTRUCT lpDrawItemStruct)
//I might want to add something else someday
switch (m_enStyle)
case FONTS:
DrawFont(lpDrawItemStruct);
break;
//I dont need the MeasureItem to do anything. Whatever the system says, it stays
void COwnerDrawCombo::MeasureItem(LPMEASUREITEMSTRUCT lpMeasureItemStruct)
void COwnerDrawCombo::DrawFont(LPDRAWITEMSTRUCT lpDIS)
CDC* pDC = CDC::FromHandle(lpDIS->hDC);
CRect rect;
TRACE0 ("In Draw Font\n");
// draw the colored rectangle portion
rect.CopyRect(&lpDIS->rcItem);
pDC->SetBkMode( TRANSPARENT );
if (lpDIS->itemState & ODS_SELECTED)
pDC->FillSolidRect (rect,m_clrHilight);
pDC->SetTextColor (m_clrHilightText);
else
pDC->FillSolidRect (rect,m_clrBkgnd);
pDC->SetTextColor (m_clrNormalText);
if ((int)(lpDIS->itemID) < 0) // Well its negetive so no need to draw text
else
CString strText;
GetLBText (lpDIS->itemID,strText);
CFont newFont;
CFont *pOldFont;
((LOGFONT*)lpDIS->itemData)->lfHeight = 90; //9 point size
((LOGFONT*)lpDIS->itemData)->lfWidth = 0;
newFont.CreatePointFontIndirect ((LOGFONT*)lpDIS->itemData);
pOldFont = pDC->SelectObject (&newFont);
pDC->DrawText(strText, rect, DT_LEFT | DT_VCENTER | DT_SINGLELINE);
pDC->SelectObject (pOldFont);
newFont.DeleteObject ();
void COwnerDrawCombo::InitFonts ()
CDC *pDC = GetDC ();
ResetContent (); //Delete whatever is there
EnumFonts (pDC->GetSafeHdc(),NULL,(FONTENUMPROC) EnumFontProc,(LPARAM)this);//Enumerate
m_bInitOver = TRUE;
BOOL CALLBACK COwnerDrawCombo::EnumFontProc (LPLOGFONT lplf, LPTEXTMETRIC lptm, DWORD dwType, LPARAM lpData)
if (dwType == TRUETYPE_FONTTYPE) //Add only TTF fellows, If you want you can change it to check for others
int index = ((COwnerDrawCombo *) lpData)->AddString(lplf->lfFaceName);
LPLOGFONT lpLF;
lpLF = new LOGFONT;
CopyMemory ((PVOID) lpLF,(CONST VOID *) lplf,sizeof (LOGFONT));
((COwnerDrawCombo *) lpData)->SetItemData (index,(DWORD) lpLF);
return TRUE;
int COwnerDrawCombo::OnCreate(LPCREATESTRUCT lpCreateStruct)
if (CComboBox::OnCreate(lpCreateStruct) == -1)
return -1;
// TODO: Add your specialized creation code here
if (m_enStyle == FONTS)
//SetItemHeight(-1,30);
PostMessage (WM_INITFONTS,0,0);
return 0;
long COwnerDrawCombo::OnInitFonts (WPARAM, LPARAM)
InitFonts ();
return 0L;
void COwnerDrawCombo::OnDestroy()
if (m_enStyle == FONTS)
int nCount;
nCount = GetCount ();
for (int i = 0; i < nCount; i++)
delete ((LOGFONT*)GetItemData (i)); //delete the LOGFONTS actually created..
// TODO: Add your message handler code here
CComboBox::OnDestroy();
void COwnerDrawCombo::FillFonts ()
m_enStyle = FONTS;
PostMessage (WM_INITFONTS,0,0); //Process in one place
int COwnerDrawCombo::GetSelFont (LOGFONT& lf)
int index = GetCurSel ();
if (index == LB_ERR)
return LB_ERR;
LPLOGFONT lpLF = (LPLOGFONT) GetItemData (index);
CopyMemory ((PVOID)&lf, (CONST VOID *) lpLF, sizeof (LOGFONT));
return index; //return the index here.. Maybe the user needs it:-)
void COwnerDrawCombo::PreSubclassWindow()
// TODO: Add your specialized code here and/or call the base class
//Tried to do what Roger Onslow did for the button.. Did not work..?? Any R&D guys around :-)
Can anyone please let me know how can I achieve this.
Any help can be appreciated.
Thanks in advance
SivaVHi sivavuyyuru,
I cannot find a easy way to make this.
I think you may need to draw your own Combo Box control. And you could change the edit control more like static text. Check the article:
http://www.codeguru.com/cpp/controls/combobox/fontselectioncombos/article.php/c1795/Owner-Drawn-Font-Selection-Combobox.htm
In the resource editor, Owner draw -> variable , Has string->true, type->drop list.
The result:
Best regards,
Shu Hu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How to increase the row height of the table in the smartform
Hi,
Can any one say,
How to increase the row height of the table in the smartform.
It is presently show the row width very small, i want to increase the row with of the table in the smartform.
Plase say how can we increase the row height in the smartform.Hi Ravi,
In Smartforms , Select the Table and you can adjust the cell hieghts in OUTPUT OPTIONs TAB.
Reward points if that Helps.
Manish -
How to increase the number of scrollable shell/terminal lines?
Hi guys,
I've just run "pacman -Syu" and got hundreds of error lines. When I tried to scroll up to the first one by pressing "shift-pageup" I noticed, that I could only go back a couple of lines. So apparently my terminal "forgot" the first few lines.
How can I increase the number of "history lines" (no, I do not mean the bash command history) in my terminal? I'm not using any terminal emulator like xterm. I have no GUI installed on that box. It's just the normal virtual console I'm talking about.
Thanks a lot in advance,
Blackholedschrute wrote:
From what I've read, the standard config uses your vga card's memory, and is pretty limited in how much it can be changed. I have seen it sugested that using less virtual consoles might give you more of a scrollback, but I can't confirm that.
There is also a somewhat new option with 2.6 kernels for "Soft Scrolback" that uses system RAM rather than VGA ram. This is a kernel, compile time option so if it isn't enabled by default in Arch, you'd have to recompile your kernel with it turned on. Google "console soft scrollback" or VGACON_SOFT_SCROLLBACK for more info.
Thanks a lot. I didn't expect it to be so difficult. I thought there would be some config file somewhere. Can't the shell/bash itself do the soft scrollback out of the box? -
How to increase the line items against the std no of line items in MIGO
hi,
I have PO with more than 100 line items
During GR system is showing the error message as
Maximum number of items F1 reached
What is the standard no of line items in MIGO
And how to increase the line items
Is there any notes to apply
plz give sutable solution
K.RaghuramDo you get message F5727 "Maximum number of items in FI reached"? reason is that in FI the posting line has a three-digit line item number (BSEG-BUZEI).
SAP's note 117708 provides a modification. I am pasting solution below.
Via the summarization you can post documents with more than 999 items in
FI.
The modification required for this is small, in addition you have to
change 2 tables. The modification is carried out in FI not in invoice
verification.
To activate document summarization in FI proceed as follows:
- The changes are described in Note 36353 and for the
modification in Note 77161. You may also have to apply Note
67640 so that the document summarization affects inventory
management.
An advice for the notes:
36353: Solution point 3: Field name WERKS
77161: Solution point 2: Maintain table TTYPV with Transaction
SE16
- this has the following effects; you can no longer clear the
GR/IR clearing account on purchase order item level (but only
on purchase order level) and you can only display the FI data
summarized (also see Note 36353) -
How can i increase the height of the navigation toolbar to make my persona more visible?
adding toolbars puts them all below the navi bar and it looks weird.
i know this has been asked many times but the answer's always "add toolbars".Look here.
http://support.apple.com/kb/index?page=answerlink&url=http%3A%2F%2Fsupport.apple .com%2Fkb%2FHT1495&answerid=16777216&src=support_site.home.search -
How to increase the system progress bar height?
Hi
I just want to increase the height of windows system progress bar and it is not able to customize. It is having the option to adjust the width and not the height. For example the height of system progress bar used in labview installer is large compared to control which is in labview control palette.
I want the progress bar as in the below figure
Thanks & Regards
Samuel J
System Engineer
Captronic Systems
Bangalore
Message Edited by Support on 07-15-2009 12:51 PM
Solved!
Go to Solution.Hi Mike
Thanks for your reply
I know that I can change height progress bar which is in modern palette. But if i customize it doesn't look like the system progress bar.
So what I have to do to make the progress bar similar to system progress bar which is in the image that I send you. If you have the customized control please send it to me.
Thanks & Regards
Sam -
How to code on button click how to increase row height in iphone/ios/uitableview
how to code on button click how to increase row height in iphone/ios/uitableview
- (CGFloat)tableView:(UITableView *)tableView heightForRowAtIndexPath:(NSIndexPath *)indexPath;
pppp=[postText objectAtIndex:indexPath.row];
CGSize maxSize = CGSizeMake(280, MAXFLOAT);//set max height
CGSize cellSize = [pppp sizeWithFont:[UIFont systemFontOfSize:14]
constrainedToSize:maxSize
lineBreakMode:NSLineBreakByWordWrapping];//this will return correct height for text
// return cellSize.height+115;
BOOL isSelected = [self.selectedIndexPaths containsObject:indexPath];
CGFloat maxHeight = MAXFLOAT;
CGFloat minHeight = cellSize.height+115;
CGFloat constrainHeight = isSelected?maxHeight:minHeight;
CGFloat constrainWidth = tableView.frame.size.width - 20.0f;
NSString *text = hChildPost[indexPath.row];
CGSize constrainSize = CGSizeMake(constrainWidth, constrainHeight);
CGSize labelSize = [text sizeWithFont:[UIFont systemFontOfSize:15.0f]
constrainedToSize:constrainSize
lineBreakMode:NSLineBreakByCharWrapping];
// return MAX(labelSize.height+75, 100.0f); return MAX(labelSize.height+75,cellSize.height+115);
i used this code but it crashed appOn what line did it "crashed app" and what was the exception? The line within this function, not in main.m. If you haven't figured this out yet: view the debugger output, try single stepping, and/or add NSLog messages in the function.
Maybe you are looking for
-
Bridge is acting real funny lately: It won't close, so I have to force quite, then I get the error message: "The operation could not be completed. The file is Locked"
-
B590 touchpad shows up only as a PS/2 mouse
Hello, I've looked around and couldn't find the answer so I'll ask here; As the title states the touchpad shows only as a mouse, and scrolling & the fn+f6 option do not worked, I had it on win 8&7, worked on neither of them. I couldn't find a dedicat
-
I can't print e-mail to pdf since ios5
hallo! i upgrade my ipad to ios5. bevore this update i printed my e-mails to pdf (app "save2pdf"). so i can write outside my office informations to the mail on my ipad. now i miss this option. the support from save2pdf tould me, that apple stopped th
-
Static members and inheritence
class A { public static int x = 111; class B extends A { public static int x = 222; void foo(A a) { System.out.println(a.x); } ...If I call "foo(new B());" it prints "111". How to change A/B or foo() so that such call will print "222", wit
-
[SOLVED]Ugly firefox again (cannot force FF to use gtk theme)
For some reasons, my firefox is pretty ugly with default theme and I cannot force it to use gtk theme for scroll bar and other components ... yeah, kinda hard to understand what i meant :/. here is the screenshot (take a look closer on the right scro