How to indent the 2nd line of a long string?

Hi all,
I would like to achieve something like below where the 2nd line will be indented automatically. How to do format this in Oracle Report? The "<--indent-->" below is to illustrate the indentation, which I can't show in this posting as the formatting is not supported.
Okuda, M., & Okuda, D. (1993). Star Trek chronology: The history of the
<--indent--->future. New York: Pocket Books.
Please advise.
Thank you.

Yes, chr(10) can make the string break to next line, but that cannot fulfill my requirement.
What I need is a single long string that will automatically get indented for the 2nd line onwards when display in report.
I can't use chr(10) because I won't know when to break to next line because it does not have fixed rule that after which part should I break it to next line. I'm referring to bibliographic citation that normally display as indented for the 2nd line.
Hope you got what I mean.

Similar Messages

How to remove the last line input into a string indicator??

I am currently working on a program where the user has the ability to create a profile for one of our lab machines to run. When the user selects what parameters they would like, a string indicator shows the user the last input they set followed by a comma. For example, if the user selects which profile they want, and the times they would like to set, the following string would be displayed:
As you can see in the picture above, the profile is updated in the string indicator after every set button is hit. In the event the user makes a mistake, I want them to have the ability to delete the last line that was added.
This is the code I developed so far. The string coming in and leaving is attached to a shift register so it continues to append to the indicator. I tried in this case to count how many lines have been written in the string so far, and I built an array with the current string. Using the delete from array.VI I indexed it to the number of lines that was created so that the last line is deleted. I unfortunately had no luck. Any suggestions?

tbob wrote:
Fonzie1104 wrote:
Hey Tbob,
That almost worked. The only issue though is it leaves a null string in its place without moving everything after up one line. Also, if i have a parameter repeating multiple times, it doenst seem to work.
I'm confused. If you are deleting the last line, how can there be anything after? What do you mean by a parameter repeating multiple times?
If you look at my example front panel, you will see that the last line is deleted. Isn't this what you asked for?
It's due to the fact that your constant doesn't have a comma in the last line. If you add that in, you should be able to reproduce his problem. This is just a guess though, I didn't actually test it to see.
Message Edited by for(imstuck) on 06-08-2010 01:24 PM
CLA, LabVIEW Versions 2010-2013

How to indent the 2nd rown in an Across/Down repeating frame

Hi Everyone,
Lets say I've a column which is storing alphabets as shown below:
col
A
B
C
D
E
F
Now I want to print these in a report as shown below...
A B C
D E F
Basically I am using a repeating frame which is set as 'across/down' and I want the second or every new row to be slightly indented towards the right. Has anyone does this before? Let me know if anyone has any pointers.
Thanks in advance.
Message was edited by:
Jassing

Sorry, in the above post somehow I lost the indentation for the second row of 'D E F' which I wanted to show. Seems this window doesn't support it too :).
Jokes apart....please let me know if we can perform any indentation in an 'across/down' repeating frame for the second or subsequent rows.
Message was edited by:
Jassing

How to read from file just the 2nd line onwards?

hi guys can anyone help me?
how to read from the file if the file was like this
2 2
2 1
1 3
and i want to get the 2 1 ,just the 2nd line and the 3rd line?
i tried using the string tokenizer but it kept saying
no such element
i tried this code:
StringTokenizer cols = new StringTokenizer(s," ");
     temp = (String) (cols.nextElement());
     num_rows = Integer.parseInt(temp);
     temp = (String) (cols.nextElement());
     num_cols = Integer.parseInt(temp);
     matrix = new int [num_rows][num_cols];
     // to add all the values in the data file into an array
     while ( s!= null ) {
     StringTokenizer st1 = new StringTokenizer (s);
           while (st1.hasMoreTokens()){
                 for (i=0; i<num_rows; i++){
                      for (j=0; j<num_cols; j++)
                         matrix[i][j] = Integer.parseInt
                            ( st1.nextToken());
            } // whilecan anyone please help me?
thanks

This will read the file witout the first line:
import java.io.*;
import java.util.*;
public class Read2
public static void main (String[] args)
     try
          FileReader     file = new FileReader("f.txt");
          BufferedReader buff = new BufferedReader(file);
          String         line = buff.readLine();
          while (line != null)
               line = buff.readLine();
               System.out.println(line);
          buff.close();
     catch(IOException e)
          System.out.println("IO Error");
}       Noah

Need to draw line after the 2nd line item(Smart Forms)

Dear Friends,
I need to draw horizontal line after the 2nd line item and 3rd line item in smart forms.How can i achive this.
Plz help.
Edited by: farook shaik on May 19, 2009 8:19 AM

This is what you need to do:
1> In the tables->details section define two line types LT1 and LT2.
2> Come back to tables section pressing the table painter button.
3> Select a line type for which you want to have an underline(say LT2).
     a] If the anchor cursor does not come click the draw lines and columns button( the pencil icon nutton)
     b] select the line type ( it will become black after selection. Press and hold down ctrl to select
         multiple cells.
     c] after selection click the lower 'frame button' ( which is right at the top of box and shading).
4> Now goto data section where you have given your internal table name and work area.
     a] in the sort criteria put your field POSNR and check the Event on Sort end chk box.
     b] you will see an extra node under the main area of the table.
     c] Create a table line with the line type LT2 in the node.
     d]Also in the Main area add another table line with LT1 as the line type.
5> If POSNR remains unchnged LT1 will be triggered.
6> if Posnr changes then LT2 will be triggered with the underline.
This will suffice your requirement.

How to delete the logical lines in JTextArea

Hi all,
Now that I know how to find the logical line count in JTextArea as
I found the following in the forum.
public static int getLineCount (JTextArea _textArea)
boolean lineWrapHolder = _textArea.getLineWrap();
_textArea.setLineWrap(false);
double height = _textArea.getPreferredSize().getHeight();
_textArea.setLineWrap(lineWrapHolder);
double rowSize = height/_textArea.getLineCount();
return (int) (_textArea.getPreferredSize().getHeight() / rowSize);
I want to delete the 4th line to the last line and append ... at the 4th, if the getLineCount exceeds 3. Does any body know how to do so?
The intention is for the multiline tooltip as I just want to show
the first three logical line and ... if the string is too long.
Thanks
Pin

The code looks good to me. The only thought I have is that the y coordinate for the rowThree point is wrong and is referencing row four.
I've been playing around with using a JTextArea as a renderer for a JTable. I have it working so that "..." appear when the text exceeds 2 rows. Try clicking on "B" in the letter column and then the update cell button a few times to add text. My code is slightly different than yours.
import java.awt.*;
import java.awt.event.*;
import java.util.*;
import javax.swing.*;
import javax.swing.table.*;
public class TestTable extends JFrame
     private final static String LETTERS = "ABCDEFGHIJKLMNOPQRSTUVWXYZ";
     JTable table;
     Vector row;
     public TestTable()
          Object[][] data = { {"1", "A"}, {"2", "B"}, {"3", "C"} };
          String[] columnNames = {"Number","Letter"};
          DefaultTableModel model = new DefaultTableModel(data, columnNames);
          table = new JTable(model)
               public String getToolTipText( MouseEvent e )
                    int row = rowAtPoint( e.getPoint() );
                    int column = columnAtPoint( e.getPoint() );
                    if (row == 0)
                         return null;
                    else
                         return row + " : " + column;
          table.setRowSelectionInterval(0, 0);
          table.setColumnSelectionInterval(0, 0);
          table.setRowHeight(0,34);
          table.setRowHeight(1,34);
          table.setRowHeight(2,34);
          table.setDefaultRenderer(Object.class, new TextAreaRenderer(2));
          JScrollPane scrollPane = new JScrollPane( table );
          getContentPane().add( scrollPane );
          JPanel buttonPanel = new JPanel();
          getContentPane().add( buttonPanel, BorderLayout.SOUTH );
          JButton button2 = new JButton( "Update Cell" );
          buttonPanel.add( button2 );
          button2.addActionListener( new ActionListener()
               public void actionPerformed(ActionEvent e)
                    int row = table.getSelectedRow();
                    int column = table.getSelectedColumn();
                    String value = (String)table.getValueAt(row, column);
                    value += value;
                    table.setValueAt( value, row, column );
                    DefaultTableModel model = (DefaultTableModel)table.getModel();
                    model.fireTableCellUpdated(row, column);
                    table.requestFocus();
     public static void main(String[] args)
          TestTable frame = new TestTable();
          frame.setDefaultCloseOperation( EXIT_ON_CLOSE );
          frame.pack();
          frame.setVisible(true);
     private class TextAreaRenderer extends JTextArea implements TableCellRenderer
          public TextAreaRenderer(int displayRows)
               setRows(displayRows);
               setLineWrap( true );
          public Component getTableCellRendererComponent(JTable table,
                                         Object value,
                                         boolean isSelected,
                                         boolean hasFocus,
                                         int row,
                                         int column)
               setText( value.toString() );
               Dimension d = getPreferredSize();
               int maximumHeight = getRows() * getRowHeight();
               if (d.height > maximumHeight)
                    setSize(d);
                    int offset = viewToModel( new Point(d.width, maximumHeight - 1) );
                    replaceRange( "...", offset-3, getDocument().getLength() );
               return this;
}

How to delete the specified line in file?

How to delete the specified line in file? In case of deleting a specified line in a file, how to do?
Line 1
Line 2
Line 3
Line 4
Line 5
The case is a file including the above content. Now I wanna to delete the "Line 3" and how to realize the action in Java?

An alternative solution can be :
import java.io.LineNumberReader;
import java.io.IOException;
import java.io.File;
import java.io.FileReader;
import java.io.BufferedWriter;
import java.io.FileWriter;
import java.io.PrintWriter;
public class LineDeleter {
public static void main(String args[]){
try {
//suppose you want to delete line 3
     int lineToBeDeleted = 3;
     File f = new File("line.txt");
     long fileSize = f.length();
//Wrap the FileReader with a LineNumberReader. It will help you
//identify the lines.
LineNumberReader lnr = new LineNumberReader( new FileReader(f));
//Wrap the FileWriter object with BufferedWriter object. Create it with the buffersize
//equal to the file size.
     BufferedWriter bw = new BufferedWriter(new FileWriter(new File("line1.txt")),(int)fileSize);
//Wrap BufferedWriter object with PrintWriter so that it allows you
//to print line by line
PrintWriter pw = new PrintWriter(bw);
     String s=null;
     while ( (s=lnr.readLine())!=null ){
          System.out.println(s);
          int lineNumber = lnr.getLineNumber();
//match the line number
          if(! (lineNumber==lineToBeDeleted)){
               pw.println(s);
          pw.flush();
          lnr.close();
          pw.close();
     catch(Exception e){System.out.println(e);}
If you want you can rename the line1.txt to the original file name.
I hope this helps.Good luck!!!!!!

How to handle the multiple line items in the Inbound idoc FM

Hi ,
Can any body give me how to handle the multiple line item in the idoc when we reprocessing it from workitem....
Thanks in Advance,,,,
Regards,
Bharani

Hi ,
Can any body give me how to handle the multiple line item in the idoc when we reprocessing it from workitem....
Thanks in Advance,,,,
Regards,
Bharani

How can hide the command line of a t.code in the portal

Dear Experts.
I have the following doubt:
How can hide the Command Line of a Report that is called with a T.Code in the portal?
Attach Image:
[Image T.Code|http://www.freeimagehosting.net/uploads/eab3b6a03c.jpg]
When I created a service using the T.Code SICF for the T.Code , I can hide buttons and the filed command line using
~webgui_simple_toolbar
~singletransaction
~NOHEADEROKCODE
With notes 1010519, "SAP GUI for HTML: Simplified Title Area Without Menu and OK Code" and 959417.
But the problem is that when I create the service in the T.Code SICF, I also have that create an Iview IAC in the portal.
The Question is : How can hide this fields and buttons if I want Publish the T.code using an Iview Transaction in the portal?
In this moment I have used the two options:
1 option) I created a service using the t.Code SICF for my Transaction and I also created an Iview IAC in the portal for call the service.
RESULT:
SAP Web Application Server
         500 Connection timed out
        Error: -5
       Version: 7000
       Component: ICM
       Date/Time: Sat Jun 12 20:26:39 2010
       Module: icxxthr_mt.c
       Line: 2698
       Server: xyxab...
Error Tag: {-}
Detail: Connection to partner timed out after 60s
2) created an Iview Transaction in the portal and call my transaction.
RESULT.
[Image T.Code|http://www.freeimagehosting.net/uploads/eab3b6a03c.jpg]
But not can hide the field Command Line and other buttons.
I think that the command :
~webgui_simple_toolbar
~singletransaction
~NOHEADEROKCODE
Only can be used if I create a service using the T.Code SICF .
Best Regards
Carmen.

Hi Carmen,
The bottom line is that this cannot be done for transaction iviews without modifying the standard webgui service in SICF, which is probably not a good idea (since it affects everyone using SAP GUI for HTML). (You could hack the appintegrator to add the ~webgui_simple_toolbar parameter to the transaction URL template in the portal, but again its not a recommended thing to do ...). Better to create an IAC service in SICF with ~webgui=1 where you set the required appearance using an appropriate value for ~webgui_simple_toolbar, and then create an IAC iview to point at this service.
You can even override the ~transaction value configured in the new service in individual IAC iviews by entering the appropriate value in the application parameter of the iview, for example:
~okcode=/nSU01
And you can pass parameters in the same way:
~okcode=/nSU01 USR02-BNAME=xyz;USREFUS-USERALIAS=abc;
By the way, it would not be recommended to create a URL iview to access an IAC, since you are likely to encounter session management issues in this scenario - better to use an IAC iview.
Regards, Rory

How to make the diagonal line in the swing table cell?

Hi all,
How to make the diagonal line in the swing table cell just like the link below?
http://61.132.17.188/webber/table.gif

One improvement.. To get a line that is neat, use a bit of Graphics2D
    public void paintComponent(java.awt.Graphics g)
        int w = getSize().width;
        int h = getSize().height;
        // draw a line between (0,0) and (w,h)
        g.setColor(getForeground());
        if (strTop == null)
            strTop = " ";
        if (strBottom == null)
            strBottom = " ";
            java.awt.Graphics2D g2 = (java.awt.Graphics2D)g;
          g2.setRenderingHint(java.awt.RenderingHints.KEY_ANTIALIASING,java.awt.RenderingHints.VALUE_ANTIALIAS_ON);
          //g2.setStroke(new java.awt.BasicStroke(14.0f));
        g.drawLine(0, 0, w, h);
        //the following lines will draw the two strings,
        //one above the top of the line and the above below it.
        g2.drawString(strTop, (w/2)+2, (h/2)-2);
        g2.drawString(strBottom, 2, (h / 2) + 2);
        //the x,y for drawString are only based on assumption.   //do necessary changes to suit ur needs.
    }Then create a TableCellRenderer and set it to the Table Header for ur table's 1st row.....
Cheers

How to break the command line in SAP scripts

Hi,
Can any one Please guide me how to continue the command line( /: ) of SAP SCPRIPT into multiple lines.
Regards
Kiran

Hi Kiran,
U can continue in the same line itself by pressing SHIFT+F8
If u want it in the next line then u can give space in the tag column.
Thanks,
Vinod.

How to echo the first line???

Hi everybody,
I need to know how to echo the first line of an XML document with a SAX parser, for example :
<?xml version="1.0"?>I've already tried :
public void processingInstruction(String target, String data) throws SAXException {
        System.out.println("Target = (" + target + ")");
        System.out.println("Data = (" + data + ")");
    }but it doesn't work.
Please, help me...
Thanks.
Maxime.

http://java.sun.com/webservices/docs/1.0/tutorial/doc/JAXPSAX4.html

How To Parse The Command Line?

Hello,dear. When I writing a C/S mode application,which performing download and upload files between the FTP server and the clients, I encountered the problem of parsing the command line.
I intend to download file from the server side ,using this following format ,which is composed by four arguments:
ftp>receive server's IPaddress portnumber filename
The problem is I don't know how to parse the command line and store them to some objects and using it.
I'm right here waiting for the nice problem-shooter.
Thanks for reading my poor expression.

In your console application main class
public static void main(String[] args)
// code
args is a sting array with the command
line itemsI think you missed the point or forgot the ":-)". This is the "Socket", not the "New to Java" forum.

How to make the last line of the textarea visible all the time?

Hello,
I am making an online chat application in JSP and XHTML. The chat log and online users� names textareas are refreshed every 5 seconds. When it comes to many messages in the chat log textarea, the scrollbar appears. Then, every time the chat log textarea is refreshed, I need to move the scrollbar down to see the last line of the textarea.
Are there any ideas how to make the last line of the textarea visible all the time without moving the scrollbar?
Thanks in advance.
Dan

I put the below code on the page, but it didn't work.
Are there any ideas? Thanks.
<table border="0" cellspacing="1">
<tr>
<th>Chat Log</th>
<th>Users now online</th>
</tr>
<tr>
<td><textarea rows="20" cols="60" name = "messages" readonly = "readonly"><%= texts %></textarea></td>
<td><textarea rows="20" cols="20" name = "names" readonly = "readonly"><%= names %></textarea></td>
</tr>
</table>
<script type="text/javascript">

</script>

How to delete the horiz line of addresses beneath the address bar

How to delete the horiz line of addresses beneath the address window. They are not affected by the "delete recent sites" tool.

Do you mean the tab bar?
See [[Tabbed browsing]]

How to indent the 2nd line of a long string?

Similar Messages

Maybe you are looking for