How to insert a letter in a RoboHelp index? (ex: A, B, C ...)

A
Andrew
Ant
Apple
B
Banana
Bat
C
Can
Country

Hi..
The border line that is displayed now is that of the MAIN window boundary. if you want to print a line immedietly after the line items end, then you need to use a suitable frame which is available in Table tab of table that you have created. These buttons are just below the Table tab described as SELECT PATTERN, OUTER FRAME etc.
Hope this works.
Regards,
Karthik

Similar Messages

How to change the letter on external HDD

My external hard drive was originally on the F drive and with this I had all my iTunes music too. However, for some reason, my computer has stopped recognizing the F drive; the following message is displayed when trying to open this drive:
"The drive or the network connection that the shortcut 'F Drive.ink' refers to is unavailable. Make sure that the disk is properly inserted or the network resource is available, and then try again."
The problem I now have is that the external hard drive is now the G drive and iTunes doesn't seem to recognize the path (G:\iTunes) I have told it to use, i.e., my music is not loading properly and only a small fraction is playable.
Can anyone help me on this matter?

Hi
I would recommend changing the external drive letter (G:) back to F.
Do you know how to do this?
After the external HDD was connected you should access the disk management and there you will see the HDD (single partitions) and the other drives.
Then you should mark the external HDD and should change the letter to F.
Possibly the F letter was reserved for another drive.
In such case you have to unlock the F letter by assigning another letter to the drive which uses the F letter.
For details please check the Microsoft knowledge document;
[How to change drive letter assignments in Windows XP|http://support.microsoft.com/kb/307844]

How to insert check box fields in a htmlb: tableview

Hi,
Can anybody tell me how to insert check box fields in a htmlb: tableview in a sequence of rows in a table view. How to generate the sequence no for the checkbox inorder to know the row that is checked.
Thanks in advance,
Aruna.

Here is the code which has the custom "Checkbox" in the tableview & Triggers the event. You can identify the checkbox based on cell ID (p_cell_id) in the method "IF_HTMLB_TABLEVIEW_ITERATOR~RENDER_CELL_START" & Based on the event name + Cell ID. Look at the code & let me know if you any issue.
Layout:
<%@page language="abap" %>
<%@extension name="htmlb" prefix="htmlb" %>
<htmlb:content id = "content"
 design = "design2002+design2003"
 controlRendering = "SAP"
 rtlAutoSwitch = "true"
 forceEncode = "ENABLED" >
<htmlb:page title="Test " >
 <htmlb:form>
 <%
data TV_ITERATOR Type Ref To zcl_itr.
data iterator type ref to IF_HTMLB_TABLEVIEW_ITERATOR.
create object tv_iterator exporting appl_cons = application.
iterator = tv_iterator.
 %>
 <htmlb:tableView id = "fligts"
 headerText = "Flight"
 width = "100"
 headerVisible = "true"
 design = "alternating"
 visibleRowCount = "10"
 fillUpEmptyRows = "true"
 showNoMatchText = "true"
 filter = "server"
 sort = "server"
 onHeaderClick = "MyEventHeaderClick"
 table = "<%= APPLICATION->itab %>"
 iterator = "<%= ITERATOR %>" />
 </htmlb:form>
</htmlb:page>
</htmlb:content>
Event Handling:
DATA: EVENT_ID1 TYPE REF TO IF_HTMLB_DATA.
EVENT_ID1 = CL_HTMLB_MANAGER=>GET_EVENT_EX( REQUEST ).
CASE EVENT_ID1->EVENT_SERVER_NAME.
IF NOT event_id1 IS INITIAL.
 if event_id1->server_event+0(9) = 'chkevent'.
SPLIT event_id1->server_event AT '-' INTO v_event v_dummy v_row v_col.
endif.
endif.
method IF_HTMLB_TABLEVIEW_ITERATOR~GET_COLUMN_DEFINITIONS.
 CLEAR p_column_definitions.
 CLEAR p_overwrites.
 DATA: tv_column TYPE TABLEVIEWCONTROL.
 tv_column-COLUMNNAME = 'FLDATE'.
 tv_column-edit = 'X'.
 tv_column-sort = 'X'.
 tv_column-TITLE = 'Flight Date'.
 tv_column-WIDTH = '100'.
 APPEND tv_column TO p_column_definitions.
 CLEAR tv_column.
 tv_column-edit = 'X'.
 tv_column-COLUMNNAME = 'CONNID'.
 tv_column-TITLE = 'Conn.ID'.
 tv_column-WIDTH = '70'.
 tv_column-HORIZONTALALIGNMENT = 'center'.
 APPEND tv_column TO p_column_definitions.
 CLEAR tv_column.
 tv_column-edit = 'X'.
 tv_column-COLUMNNAME = 'CHECKBOX1'.
 tv_column-TITLE = 'Check Box'.
 tv_column-WIDTH = '30'.
 tv_column-HORIZONTALALIGNMENT = 'center'.
 APPEND tv_column TO p_column_definitions.
endmethod.
METHOD IF_HTMLB_TABLEVIEW_ITERATOR~RENDER_CELL_START.
 DATA: L_EVENT TYPE STRING.
CASE P_TABLEVIEW_ID.
 WHEN 'fligts'.
 CASE P_COLUMN_KEY.
 WHEN 'CHECKBOX1'.
* CONCATENATE 'chk_event' '123' '2323' INTO L_EVENT SEPARATED BY '-' .
CONCATENATE 'chkevent' p_cell_id INTO l_event SEPARATED BY '-'.
 P_REPLACEMENT_BEE = CL_HTMLB_CHECKBOX=>FACTORY( ID = P_CELL_ID
 ONCLICK = L_EVENT CHECKED = 'false' ).
 ENDCASE.
ENDCASE.
ENDMETHOD.
Hope this will solve your problem.
* Reward each helpful answer.
Raja T
Message was edited by:
 Raja T

How to insert the data from XML to a table

Hi,
I'm using Oracle 10g Express Edition
I need help in How to insert the data from XML file into the table.
Below is the example i'm working on..
I have create ridb user with below mentioned privileges:
Account Status Locked Unlocked
Default Tablespace: USERS
Temporary Tablespace: TEMP
User Privileges :
Roles:
CONNECT
RESOURCE
Direct Grant System Privileges:
CREATE DATABASE LINK
CREATE MATERIALIZED VIEW
CREATE PROCEDURE
CREATE PUBLIC SYNONYM
CREATE ROLE
CREATE SEQUENCE
CREATE SYNONYM
CREATE TABLE
CREATE TRIGGER
CREATE TYPE
CREATE VIEW
& table is created TRIALZIPCODES below mentioned is the DDL:
CREATE TABLE TRIALZIPCODES
STATE_ABBR VARCHAR2(20) NOT NULL
, ZIP_CODE NUMBER(10, 0) NOT NULL
, ZIP_CODE_EXT VARCHAR2(20)
Below is the XML FILE: which is stored in C:\OracleProject Folder
File name: trial.xml
<?xml version="1.0" ?>
<metadata>
- <Zipcodes>
- <mappings Record="4">
<STATE_ABBREVIATION>CA</STATE_ABBREVIATION>
<ZIPCODE>94301</ZIPCODE>
</mappings>
- <mappings Record="5">
<STATE_ABBREVIATION>CO</STATE_ABBREVIATION>
<ZIPCODE>80323</ZIPCODE>
<ZIP_CODE_EXTN>9277</ZIP_CODE_EXTN>
</mappings>
</Zipcodes>
</metadata>
PL/SQL Procedure:which i'm trying to execute from SQLDeveloper
create or replace
PROCEDURE TRIAL AS
BEGIN
DECLARE
-- declare attributes
charString varchar2(80);
finalStr varchar2(4000) := null;
rowsp integer;
v_FileHandle UTL_FILE.FILE_TYPE;
l_context_handle dbms_xmlgen.ctxHandle;
insCtx DBMS_XMLStore.ctxType;
begin
-- DBMS_XMLGEN.setRowTag ( ctx IN ctxHandle, rowTag IN VARCHAR2);
-- DBMS_XMLGEN.setRowSetTag ( ctx IN ctxHandle, rowSetTag IN VARCHAR2);
-- the name of the table as specified in our DTD
DBMS_XMLGEN.SETROWSETTAG(l_context_handle,'zipcodes');
-- the name of the data set as specified in our DTD
DBMS_xmlgen.setRowTag(l_context_handle,'mappings');
-- for getting the output on the screen
dbms_output.enable(1000000);
-- open the XML document in read only mode
v_FileHandle := utl_file.fopen('c:/OracleProject','trial.xml', 'r');
loop
BEGIN
utl_file.get_line(v_FileHandle, charString);
exception
when no_data_found then
utl_file.fclose(v_FileHandle);
exit;
END;
dbms_output.put_line(charString);
if finalStr is not null then
finalStr := finalStr || charString;
else
finalStr := charString;
end if;
end loop;
-- for inserting the XML data into the table
insCtx := DBMS_XMLSTORE.NEWCONTEXT('RIDB.TRIALZIPCODES');
insCtx := DBMS_XMLSTORE.INSERTXML(insCtx, finalStr);
dbms_output.put_line('INSERT DONE '||TO_CHAR(rowsp));
DBMS_XMLStore.closeContext(insCtx);
END;
END TRIAL;
For the first time when i complied i got the errors as :
Procedure RIDB.PROCEDURE1@RIDB
Error(16,14): PLS-00201: identifier 'UTL_FILE' must be declared
Error(16,14): PL/SQL: Item ignored
Error(29,1): PLS-00320: the declaration of the type of this expression is incomplete or malformed
Error(29,1): PL/SQL: Statement ignored
Error(33,1): PL/SQL: Statement ignored
Error(33,19): PLS-00320: the declaration of the type of this expression is incomplete or malformed
Error(36,1): PL/SQL: Statement ignored
Error(36,17): PLS-00320: the declaration of the type of this expression is incomplete or malformed
So i logged in as sys & grant the permission to execute on UTL_FILE to ridb (user):
SQL Statement:
grant execute on utl_file to ridb
So, it got compiled successfully but when i execute it gives me error as:
Source does not have a runnable target.
What does this mean?
So I browse through forum & i got to know that i need to initial the UTL_FILE_DIR ="C:/OracleProject" in init.ora
So can i edit the init.ora with notepad.When i tried to do that it says permission denied
In my system it shows the init.ora file in path C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts
but there is also other file initXETemp in the same path do i need to do the changes in it.
I have tried even editing the SPFILE as mentioned below:
C:\oraclexe\app\oracle\product\10.2.0\server\dbs\SPFILEEXE - I had edit this file using notepad & set the value of UTL_FILE_DIR ="C:/OracleProject". So next time when i restarted i'm unable to log on to the database.
So i had reinstall the software again.
Could you please let me know how to proceed..

hi,
I have created the directory from sys database
CREATE or replace DIRECTORY XML_DIR2 AS 'C:\OracleProject';
& grant read,write access to the user
grant read,write on directory XML_DIR2 to RIDB;
& i had change the tag name in the xml file as shown below:
<?xml version = '1.0'?>
<metadata>
<Zipcodes>
<mappings Record="4">
<STABBRE>CA</STABBRE>
<ZIPCODE>94301</ZIPCODE>
</mappings>
<mappings Record="5">
<STABBRE>CO</STABBRE>
<ZIPCODE>80323</ZIPCODE>
<ZIPCODEEXT>9277</ZIPCODEEXT>
</mappings>
</Zipcodes>
</metadata>
TRIALZIPCODE table as shown below:
CREATE TABLE "RIDB"."TRIALZIPCODE"
( "STABBRE" VARCHAR2(20 BYTE),
 "ZIPCODE" NUMBER(*,6) NOT NULL ENABLE,
 "ZIPCODEEXT" NUMBER
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
I have tried two methods as shown below:
Procedure 1:
create or replace
PROCEDURE TRIAL_V2 AS
BEGIN
DECLARE
-- declare attributes
charString varchar2(80);
finalStr varchar2(4000) := null;
rowsp integer;
v_FileHandle UTL_FILE.FILE_TYPE;
l_context_handle dbms_xmlgen.ctxHandle;
insCtx DBMS_XMLStore.ctxType;
cnt NUMBER;
xmldoc xmltype := xmltype( bfilename('XML_DIR2','trialxml.xml'), nls_charset_id('AL32UTF8') );
--XML_DIR VARCHAR2(40) := 'C:\\OracleProject';
BEGIN
insCtx := DBMS_XMLStore.newContext('DEV.TRIALZIPCODES');
DBMS_XMLStore.setUpdateColumn(insCtx, 'STABBRE');
DBMS_XMLStore.setUpdateColumn(insCtx, 'ZIPCODE');
DBMS_XMLStore.setUpdatecolumn(insCtx, 'ZIPCODEEXT');
DBMS_XMLStore.setRowTag(insCtx, 'mappings');
cnt := DBMS_XMLStore.insertXML(insCtx, xmldoc);
DBMS_XMLStore.closeContext(insCtx);
END;
Procedure 1 was compiled with out errors but when i execute i got the error as :
Source does not have a runnable target.
Procedure 2_
CREATE OR REPLACE PROCEDURE TRIAL_V3 AS
BEGIN
DECLARE
-- declare attributes
charString varchar2(80);
finalStr varchar2(4000) := null;
rowsp integer;
v_FileHandle UTL_FILE.FILE_TYPE;
l_context_handle dbms_xmlgen.ctxHandle;
insCtx DBMS_XMLStore.ctxType;
cnt NUMBER;
xmldoc xmltype := xmltype( bfilename('XML_DIR2','trialxml.xml'), nls_charset_id('AL32UTF8') );
--XML_DIR VARCHAR2(40) := 'C:\\OracleProject';
BEGIN
INSERT INTO trialzipcode (STABBRE, ZIPCODE, ZIPCODEEXT)
SELECT extractvalue(x.column_value, 'mappings/STABBRE'),
extractvalue(x.column_value, 'mappings/ZIPCODE'),
extractvalue(x.column_value, 'mappings/ZIPCODEEXT')
FROM TABLE(
XMLSequence(
EXTRACT(
xmltype( bfilename('XML_DIR2','trialxml.xml'), nls_charset_id('AL32UTF8') ),
'metadata/Zipcodes/mappings'
) x
END;
END TRIAL_V3;
Procedure 2 was complied without errors but when i execute i got the error as:
Connecting to the database RIDB.
ORA-22288: file or LOB operation FILEOPEN failed
The system cannot find the file specified.
ORA-06512: at "SYS.DBMS_LOB", line 523
ORA-06512: at "SYS.XMLTYPE", line 287
ORA-06512: at "RIDB.TRIAL_V3", line 12
ORA-06512: at line 2
Process exited.
Disconnecting from the database RIDB.
Could you please let me know how to proceed...

How to insert a flying image in a video

How to insert flying images in a video...someone it's speaking in the left side and in the right side some flying pictures are coming, staying for 2-3 seconds one by one....some ideas???
Like the weather forecast...you have someone in the left side speaking and she is showing some images in the right side.
Please let me know if you know how it can be done this in after effects or with another video editor...
Thanks!!!

It can be done in either. There are 3 steps.
Learn about greenscreen (keying) including lighting, filming, best formats for video (the way they do it in the weather segment) or masking and roto.
learn about image editing including sizing images, color correcting, applying effects
learn about controlling motion and editing duration of stills in a NLE or After Effects
When you have a few of these basics down and have designed your production you then load up the video and the stills, key out the background or mask around your talent to separate the talent from the background, add your photos to the time line and animate their duration and position.
This is extremely basic stuff that can be accomplished in a NLE or in AE. You can basically reproduce just about any effect you've ever seen in a movie in AE with the right planning and plug-ins. You can do just about anything you've ever seen in a news broadcast in any modern NLE.

How do i make letter heads on all pages

How do I make letter heads on all pages in pages?

In the inspector, click the first icon, "Document.'
In that window, check 'Headers' and or 'Footers.'
Clicking in the area near the top (or bottom) will put the cursor in a box where you can create the page headers or footers.
Headers and Footers can appear:
On all pages,
All except the first page, and
Differently on right and left pages.
You can insert text boxes into the header and footer fields as well, and arrange fonts and alignments for each text box separately.
You can past images into the headers and footers. Drag the image into the page. Cut it. Click the header or footer box. Paste it. Resize it.
Good luck, and have fun!

How to insert a pdf file from a dynamic location into a table

Hi friends
Can any one please let me know how to insert a pdf file into a table from a dynamic location in server.
suppose say i have a table CUST_BLOB(file_name, file_data). I have a file in directory c:\local having file_name test.pdf
I want to insert this file in CUST_BLOB. Please help me.
Thanks in advance.
--Ahmed

user620950 wrote:
Hi friends
Can any one please let me know how to insert a pdf file into a table from a dynamic location in server. Why dynamic locations on the server?
Make it a business case that the files should be stored in specific location(s).
Oracle uses directory objects to point to locations on the file system and, whilst these locations can be altered, it is better practice to set up specific locations and grant permission to the correct users for those locations so that there is full control over who is accessing what on the server. Whilst filenames may be dynamic, I wouldn't recommend using dynamic locations.

How to insert record inside the internal table in below code

Hi all,
My requirement is to find the sub-total and need to insert in between the internal table.
You can see the output ....where I want the sub-total F2 when 1 & 2 combindely , 3 , 4& 5 combindely .Please check it and let me know is it possible
when i am using modification it is not creating extra row inside the table instead it is modifying one row and putting the total there.
For ex: the origianl output is
F1   F2       F3
A      1          1
B      1          1
F      2          1
D      3          1
E      4          1
C      5          1
We want to display all the total of f2 of 1-2 , 3 , 4-5
so expcected output is
F1   F2       F3
A      1          1
B      1          1
F      2          1
     *              3 ->This is the sub-total of 1& 2 of f2
D      3          1
        *           1 ->this is the sub-total of 3
E      4          1
C      5          1
      *             2 -> this is the sub-total of 4 & 5
= space
But coming output is
A 1          1
B 1          1
*             3 -> it is modifying the F row and inserting the total .Total is comong correct but is shoule insert instead of modifying the record!!
*           1
E 4          1
*             2
Please help how to insert the row total at the end of the chage of field
Please find the below code ..Due to space problem i am attaching below
Sas

Here is the solution ....i Got the answer Thanks for your helping hands friends
REPORT YTEST_MODIFY.
DATA: BEGIN OF ITAB OCCURS 1,
TOT TYPE C,
F1 TYPE C,
F2 TYPE C,
F3 TYPE I ,
END OF ITAB.
DATA: BEGIN OF JTAB OCCURS 1,
F1 TYPE C,
F2 TYPE C,
F3 TYPE I ,
END OF JTAB.
START-OF-SELECTION.
ITAB-F1 = 'A'.
ITAB-F2 = 1.
ITAB-F3 = 1.
APPEND ITAB.
ITAB-F1 = 'B'.
ITAB-F2 = 1.
ITAB-F3 = 1.
APPEND ITAB.
ITAB-F1 = 'C'.
ITAB-F2 = 5.
ITAB-F3 = 1.
APPEND ITAB.
ITAB-F1 = 'D'.
ITAB-F2 = 3.
ITAB-F3 = 1.
APPEND ITAB.
ITAB-F1 = 'E'.
ITAB-F2 = 4.
ITAB-F3 = 1.
APPEND ITAB.
ITAB-F1 = 'F'.
ITAB-F2 = 2.
ITAB-F3 = 1.
APPEND ITAB.
SORT ITAB BY F2.
LOOP AT ITAB.
    WRITE:/1 ITAB-F1 ,
          8 ITAB-F2 ,
          10 ITAB-F3 .
ENDLOOP.
LOOP AT ITAB.
    IF ITAB-F2 = 1 OR ITAB-F2 = 2.
      ITAB-TOT = 1.
      MODIFY ITAB.
    ELSEIF ITAB-F2 = 3.
      ITAB-TOT = 3.
      MODIFY ITAB.
    ELSEIF ITAB-F2 = 4 OR ITAB-F2 = 5.
      ITAB-TOT = 4.
      MODIFY ITAB.
    ENDIF.
ENDLOOP.
SKIP 2.
SORT ITAB BY TOT.
DATA : L_SUM(2) TYPE C,
         L_ROW(2) TYPE C.
LOOP AT ITAB.
    MOVE-CORRESPONDING ITAB TO JTAB.
    APPEND JTAB.
    L_SUM = L_SUM + ITAB-F3 .
    AT END OF TOT.
      CLEAR JTAB.
      JTAB-F3 = L_SUM .
      APPEND JTAB.
      CLEAR L_SUM.
    ENDAT.
ENDLOOP.
LOOP AT JTAB.
    WRITE:/1 JTAB-F1 ,
          8 JTAB-F2 ,
          10 JTAB-F3 .
ENDLOOP.
* DATA: a TYPE i , b .
* LOOP AT itab.
*    IF b = 0.
*      a = a + itab-f3.
*    ENDIF.
*    AT END OF tot.
*      MOVE space TO itab-f1.
*      MOVE space TO itab-f2.
*      MOVE a TO itab-f3.
*      MODIFY itab .
*      CLEAR a.
*      b = 1.
*    ENDAT.
*    b = 0.
* ENDLOOP.
* LOOP AT itab.
*    MOVE-CORRESPONDING itab TO jtab.
*    APPEND jtab.
* ENDLOOP.
* ULINE.
* LOOP AT jtab.
*    WRITE: / jtab-f1 , jtab-f2 , jtab-f3.
* ENDLOOP.

How to insert / Update value for PFAKT in BP Relationship

Hi Friends / Experts,
How to insert the value for PFAKT ( Function value ) in BP Relationship in BP tcode , in SAP CRM.
I have tried it but it BAPI_BUPR_CONTP_CREATE. But I need it with BAPI_BUPR_RELATIONSHIP_CREATE Function Module.
Please help me out.
Any Enhancement points in BAPI_BUPR_RELATIONSHIP_CREATE or any user exists. Please let me know.
Regards,
KMF.

you can also acheive this using MERGE( available in sql 2008 and above).
also, you are referring to DTS. DTS is legacy solution now..are you using sql 2000, you can use ssis, if you want and it available in sql 2005. as said, there are multiple ways you can do this.. it find the below one a easy solution, since your are
talking about only one table..
try this example..
create table test1(sno int primary key,sname varchar(20),scity varchar(20))
go
create table test2(sno int primary key,sname varchar(20),scity varchar(20))
go
insert into test1
values(1,'stan','atlanta'),(2,'william','newyork')
go
insert into test2
values(1,'robin','orlando')
go
--set this in you sql job and let it run for every half an hour
MERGE test2 t2
USING test1 t1
ON t2.sno = t1.sno
WHEN MATCHED THEN
UPDATE
SET t2.sname = t1.sname,t2.scity=t1.scity
WHEN NOT MATCHED by target THEN
Insert(sno,sname,scity)
values (sno,sname,scity);
go
--check this table and clean up
select * from test2
go
drop table test1
go
drop table test2
Hope it Helps!!

How to insert horizontal line dynamically after every line item in sapscrip

Hi All,
I have to insert a horizontal line after every new item in sap script.
How to do this .
In some material there is2 line item or in other line item it ay be more .
How to insert horizontal line dynamically after every line item
Point will be rewarded
Regards
Niraj

Hi Niraj,
You can get your work done by keeping the horizontal line (&ULINE&) after all the item level fields, in this case once each item line is written you will get a horizontal line.
In case you have different fields for the item lines which are optional (not printed every time) then you can have them in an IF....ENDIF condition and below the endif use a horizontal line.
Some thing like this:
/E ITEM_HEADER
IL <TI>Item,,Material,,Description</>
IP <TI>,,,,Quantity,,,,Price,,Price unit,,,,,,Value</>
/ &ULINE(71)&
Let me know if this helps, else please describe your problem with an example.
Luck.

How to insert data in table UI elements

Hi Guys,
Here is my questions. How to insert data in table UI elements.
Here i try to insert data by using Add button
data:
 Node_Item type ref to If_Wd_Context_Node.
 Node_Item = wd_comp_controller->get_data_node( ).
data:
 lr_table_line type ref to ITEM.
 lr_table_line = Node_Item->create_element( ).
field-symbols:
 <ls_table> type any.
assign lr_table_line->* to <ls_table>.
Node_Item->bind_element(
 new_item = <ls_table>
 set_initial_elements = abap_false
 index = 1 ).
But i got syntax error the result type of the function method cannot not be converted in to the type of lr_table_line.
And i set cardinality and selection as 0.n.
Pls, let me know for the soulutions
Chandru
Message was edited by:
 chandrasekar muthuvelraj

Chadru, another option is for you to bind the table UI field to an internal table and to populate the internal table. Then, automatically, your Table UI field will be populated with the data from the internal table. Here is the code that does that and works for me. Good luck!
method FILL_DATA .
DATA: node_level1 type ref to if_wd_context_node,
 node_level2 type ref to if_wd_context_node,
 node_items type ref to if_wd_context_node,
 stru_ResItems type BAPI2093_RES_ITEM,
 tab_ResItems TYPE TABLE OF BAPI2093_RES_ITEM,
 n type i.
node_level1 = wd_context->get_child_node( name = 'BAPI_RESERVATION_CRE' ).
node_level2 = node_level1->get_child_node( name = 'CHANGING' ).
node_items = node_level2->get_child_node( name = 'RESERVATIONITEMS' ).
n = 2.
do n times.
 insert stru_ResItems into table tab_ResItems.
enddo.
node_items->bind_table( tab_ResItems ).
endmethod.

How to insert page number on each page for Cross-Tab report?

Hi,
I have created a Cross-Tab in the section Report Header via Crystal Reports 11.
Now, I want to created more Cross-Tabs, and each page has one Cross-Tab.
So, I insert Report Headers to contain Cross-Tabs. But, the report only shows the page number at the last page.
How to insert page number on each page?
Thanks in advance.

Hi,
Well, the easiest solution is to place the Cross-tab in the Report Footer, Of course, ONLY if the report contains this single object which I'm assuming is not the case.
If you do not wish to place the cros-tab in the Report Footer, here's what you need to do:
1) Create a formula;
whilereadingrecords;
2) Create a group on this formula. If the report already contains groups, move this formula to the top of the grouping list. It won't affect the other groups or records in any way.
3) Move the Cross-tab from the Report Header to the Group Header1 and suppress Group Footer1
4) Add the Page Number field to the Page Footer
Let me know how this goes!
-Abhilash

How to insert PO details in an ADF based form and initiate the process flow

Hi All,
Could any one let me know how to insert PO details in an ADF based form and initiate the process flow in oracle BPM. This ADF form will be custom one....How to create a ADF custom based form.Please let me know the step by step process..Am new to BPM
Thanks in advance,
sreevani

Hi All,
Could any one let me know how to insert PO details in an ADF based form and initiate the process flow in oracle BPM. This ADF form will be custom one....How to create a ADF custom based form.Please let me know the step by step process..Am new to BPM
Thanks in advance,
sreevani

How to Insert Sharepoint 2013 Person or Group Field using VBA

Hello,
How to Insert Sharepoint 2013 Person or Group Field using VBA , I tried set the field with ID / ID;Name / Name
but all failed, Please advice
Function SetSP_Field(F_Yer As Single, F_WekNo As Single, F_ProjectNum As String, strField As Variant, strFieldValue As Variant) As String
' test code
 Dim rst As Recordset
 Dim strSQL As String
 Dim SP_RecSet As ADODB.Recordset
 Set SP_RecSet = New ADODB.Recordset
 SetSP_Field = False
 strSQL = "Status Report"
 On Error Resume Next
 Call SP_Connect(2)
 strSQL = "select " & SP_List & ".* From " & SP_List _
 & " Where [Year] = " & CInt(F_Yer) _
 & " and [WeekNo] = " & CInt(F_WekNo) _
 & " and [Compass_Code] = '" & F_ProjectNum & "' ; " _
' & " Set " & strField & " = " & strFieldValue
 'Debug.Print strSQL
 'Debug.Print SP_CN
 SP_RecSet.Open strSQL, SP_CN, adOpenStatic, adLockOptimistic
 If SP_RecSet.RecordCount = 0 Then
 Debug.Print "Record for project: " & F_ProjectNum & " not found"
 LogFile.WriteLine ("Record " & strID & " not found")
 End If
 If Not SP_RecSet.EOF Then
 'SP_RecSet.Edit
 SP_RecSet.Fields(strField) = strFieldValue
 SP_RecSet.Update
 If Err.Number <> 0 Then
 MsgBox ("SP Update Error: " & Err.Description)
 GoTo Exit_Fun
 End If
 SetSP_Field = True
 End If
Exit_Fun:
 SP_RecSet.Close
 Set SP_RecSet = Nothing
End Function

Hi Tim,
Let’s verify the followings:
Whether this issue occurred for other lists in the same site.
Whether this issue occurred for all users who don’t have full control.
Whether this issue occurred on other sites.
When you created the people & group column, which show field did you used? Please try to use a different show field for the people & group column, compare the result.
In addition, please check if the link is useful:
http://www.learningsharepoint.com/2013/08/21/empty-value-in-people-picker-after-saving-the-list-form-in-sharepoint/
Best Regards,
Wendy
Wendy Li
TechNet Community Support

How to insert or select value d'silva

Hi,
How to insert or select value d'silva into/from table.
please let me know.
Thanks,
Sathis.

Just escape the ' character:
SQL> insert into emp values(999, 'D''Silva', 'Jose');
1 row created.
SQL> select * from emp where last_name = 'D''Silva';
EMPLOYEE_ID LAST_NAME                 FIRST_NAME
        999 D'Silva                   Jose
[pre]

How to insert a letter in a RoboHelp index? (ex: A, B, C ...)

Similar Messages

Maybe you are looking for