How to insert application form id into the form template

Hi,
Is there a way to set the application form id into a form template designed from the LiveCycle Designer? Here is the detail description of my question:
(1) I am using LiveCycle Design to design a form template.
(2) I go to our application to deploy this form template. During the process, a form id will be generated and it will be associated with this form template.
(3) I would like to insert this generated form id into the form template, so that later when user fills out and submits the form, I will know what's the form id the submitted data belongs to.
Appreciate you kind help!!!

Hi Justin,
Yes. The form ID will be generated by our application during the form deployment process (after the form is designed, it needs to be deployed to our application before it can be used.). So I was hoping there is a way to set the form ID into the form template design at that point. So that later when end user fills out and submits this form, I will know what form ID it is related to.
If I cannot do this at the deployment point, one way I can think of is to do it at the time when end user is downloading the form. I can return a "rendered" form (instead of opening up the form template directly) with the form ID information in it. But that means for every single form user opened we need to render it at run time to fill in the form ID, which is not performing and what I was trying to avoid.
Thanks for your help!
Anita

Similar Messages

How to insert drop-down box into the already set-up table ?

if i have a table already set up, and i do want to add the drop-down box into each column like in the excel. how would i do that ? this drop-down box would allows me to specifically select the data as shown on the screen.

Hi Bondwaan,
I am not sure wht you are asking but I suspect it has to do with a popup menu. If that is the case, a popup menu is a formatting choice.
If you need more info, you will need to ask a more specific question.
quinn

How to insert a 2D array into the end of X axis of the initial array?

Hi, friends, I have a question and look for an advice. I have several input data, each of which has 4 rows and unknow columns. Each time I receive the input, I need to combine it to all of the previous ones by adding it to the end of X axis of the previous combined data. I must do it because, later, I need to run my model and my model read input for each column of 4 rows. How should I do it? Also, should I initiate an array before reading all of the inputs? The inputs are F32 format. Thank you very much for any of your advice.

Building a 2D array row-by-row is easy. You either use "build array" if you need to update the indicator during the run, or you simply autoindex at the loop boundary (FOR or WHILE).
Two possibilities are shown in the attached image. If your arrays are getting large and you use a while loop, there are possibilities that are more memory efficient. You would initialize a 2D array (e.g. filled with NaNs) of an upper boundary of the final expected size, then replace rows as you go.
(Notice that if you use autoindexing on a FOR loop, the final size is known from the beginning so memory can be allocated efficiently)
Message Edited by altenbach on 11-01-2006 09:19 AM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
AppendRows.png ‏5 KB

How to insert Adobe Form Data in the SAP backend?

Hi there,
I am very new to Adobe Forms. I am supposed to come up with a working scenario of inserting few form fields into the SAP backend. Is this done through a BAPI call? Or is there any other way for this to achieve?
I have downloaded trial version of Adobe LifeCycle Designer. But I don't know how to integrate this with the SAP system. Is there anything else that I need to install in my system?
Is there a document on how to configure all the installations for both local machine and the server (if any)?
Please help.....
[I went through the forum for this, but I did not get anything]
Warm regards,
Deepak

hi,
in the livecycle designer under libary tab u have webdynpro tab--->choose submit to sap button and place it in the adobe form ur designing. u can use this button to trigger the code that u have written in webdynpro java.
for eg if u have
a value node details
and under that two value attr fname,lname
import the model (Insertdata---it has two import param fname and lname)u need for updating the data to r3 system.
in the ctrller have a method submit.Here write the code to insert fname and lname into the db.
IPrivateMyForm.IDetailsElement elem = wdContext.nodeDetails().currentDetailsElement();
Insertdata_Input input = new Insertdata_Input();
wdContext.nodeInsertdata_Input().bind(input);
input.setFname(elem.getFname());
input.setLname(elem.getLname());
try
wdContext.currentInsertdata_InputElement().modelObject().execute();
wdContext.nodeOutput().invalidate();
catch (Exception ex)
{ ex.printStackTrace();}
ul bind details to the datasource.
when u edit ur interactive ui element these attr(fname and lname) vl be visible under dataview tab u can drag and drop them to the form
now add submit to sap button in ur form.
this button correspond to the onactionSubmit dat u have written in the ctrller.
so wen u click this the data vl be inserted
Regards
Jay

How can I set up lightroom 5 in my macbook, so that it becomes my default editing program, so that it starts up when I insert my sd card into the mac

How can I set up lightroom 5, so that it becomes my main / default editing program & that when I insert my sd card into the mac lightroom starts instead of iPhoto .

Thanks. Im new to apple, which preference?
Sent from my iPhone

TS1315 I have just purchased the new iPad with the camera connection kit. I just want to bewant to be able to insert my SD card into the Pad and only view my photos, not import them to the pad. Can this be done and how do I do this. Please advise. Thaj

I have just purchased the new iPad with the camera connection kit. I just want to be able insert my SD card into the Pad and view my photos, not import them.Can this be done and how? Please advise. Thank you.

See this article: iPad: Using the iPad Camera Connection Kit
No, this canot be done, afaik. When your camera or card is connected, you will see the thumbnails in the camera pane, but not full size preview. So to browse your photos on the iPad you will need to import them to your camera roll. But you need not delete them from the camera or card after importing, so you might simply import selected photos to your camera roll from the camera grid and then delete them again from the camera roll after importing and browsing, without removing them from the card/camera.
Regards
Léonie

How do I insert a video clip into the timeline?

Do you happen to know how I could insert a video clip into the middle of a movie like you do in FCP? Can you add tracks and insert the clip above the spot i need to change for each movie.
I don't want to render the whole movie (convert it into a MPeg2) each time.

No - DVD timelines are a little different to FCP. If you need to add a clip to the stream, you need to split the exisitng clip (you could trim it back to where you want to insert the new piece) and drag the new piece onto the same timeline. If you trimmed the existing piece then add another instance of it to the timeline and trim the new part from the left until you get to what you want as the out point.
If you have a collection of video clips on your DVDSP timeline, simply dragging a new one on will shuffle the others along appropriately. However, the audio will not shuffle with them, and you'll end up moving it all manually.
The very best thing is to create the timeline precisely as you want it in FCP and encode it to MPEG2 before bringing it in to DVDSP. Remember that DVDSP is not an editor, it is a place to assemble your work - it won't do anything remotely like FCP in that respect.

How to insert a image file into oracle database

hi all
can anyone guide me how to insert a image file into oracle database now
i have created table using
create table imagestore(image blob);
but when inserting i totally lost don't know what to do how to write query to insert image file

Hi I don't have time to explain really, I did have to do this a while ago though so I will post a code snippet. This is using the commons file upload framework.
Firstly you need a multi part form data (if you are using a web page). If you are not using a web page ignore this bit.
out.println("<form name=\"imgFrm\" method=\"post\" enctype=\"multipart/form-data\" action=\"FileUploadServlet?thisPageAction=reloaded\" onSubmit=\"return submitForm();\"><input type=\"FILE\" name=\"imgSource\" size='60' class='smalltext' onKeyPress='return stopUserInput();' onKeyUp='stopUserInput();' onKeyDown='stopUserInput();' onMouseDown='noMouseDown(event);'>");
out.println("   <input type='submit' name='submit' value='Submit' class='smalltext'>");
out.println("</form>"); Import this once you have the jar file:
import org.apache.commons.fileupload.*;Now a method I wrote to upload the file. I am not saying that this is correct, or its the best way to do this. I am just saying it works for me.
private boolean uploadFile(HttpServletRequest request, HttpSession session) throws Exception {
        boolean result = true;
        String fileName = null;
        byte fileData[] = null;
        String fileUploadError = null;
        String imageType = "";
        String error = "";
        DiskFileUpload fb = new DiskFileUpload();
        List fileItems = fb.parseRequest(request);
        Iterator it = fileItems.iterator();
        while(it.hasNext()){
            FileItem fileItem = (FileItem)it.next();
            if (!fileItem.isFormField()) {
                fileName = fileItem.getName();
                fileData = fileItem.get();
                // Get the imageType from the filename extension
                if (fileName != null) {
                    int dotPos = fileName.indexOf('.');
                    if (dotPos >= 0 && dotPos != fileName.length()-1) {
                        imageType = fileName.substring(dotPos+1).toLowerCase();
                        if (imageType.equals("jpg")) {
                            imageType = "jpeg";
        String filePath = request.getParameter("FILE_PATH");
        session.setAttribute("filePath", filePath);
        session.setAttribute("fileData", fileData);
        session.setAttribute("fileName", fileName);
        session.setAttribute("imageType", imageType);
        return result;
     } And now finally the method to actually write the file to the database:
private int writeImageFile(byte[] fileData, String fileName, String imageType, String mode, Integer signatureIDIn, HttpServletRequest request) throws Exception {
        //If the previous code found a file that can be uploaded then
        //save it into the database via a pstmt
        String sql = "";
        UtilDBquery udbq = getUser(request).connectToDatabase();
        Connection con = null;
        int signatureID = 0;
        PreparedStatement pstmt = null;
        try {
            udbq.setUsePreparedStatements(true);
            con = udbq.getPooledConnection();
            con.setAutoCommit(false);
            if((!mode.equals("U")) || (mode.equals("U") && signatureIDIn == 0)) {
                sql = "SELECT SEQ_SIGNATURE_ID.nextval FROM DUAL";
                pstmt = con.prepareStatement(sql);
                ResultSet rs = pstmt.executeQuery();
                while(rs.next()) {
                   signatureID = rs.getInt(1);
                if (fileName != null && imageType != null) {
                    sql = "INSERT INTO T_SIGNATURE (SIGNATURE_ID, SIGNATURE) values (?,?)";
                    InputStream is2 = new ByteArrayInputStream(fileData);
                    pstmt = con.prepareStatement(sql);
                    pstmt.setInt(1, signatureID);
                    pstmt.setBinaryStream(2, is2, (int)(fileData.length));
                    pstmt.executeUpdate();
                    pstmt.close();
                    con.commit();
                    con = null;
            if(mode.equals("U") && signatureIDIn != 0) {
                signatureID = signatureIDIn.intValue();
                if (fileName != null && imageType != null) {
                    sql = "UPDATE T_SIGNATURE SET SIGNATURE = ? WHERE SIGNATURE_ID = ?";
                    InputStream is2 = new ByteArrayInputStream(fileData);
                    pstmt = con.prepareStatement(sql);
                    pstmt.setBinaryStream(1, is2, (int)(fileData.length));
                    pstmt.setInt(2, signatureID);
                    pstmt.executeUpdate();
                    pstmt.close();
                    con.commit();
                    con = null;
        } catch (Exception e) {
            con = null;
            throw new Exception(e.toString());
        return signatureID;
   }

After creating a new user account, how do I move my files into the new user?

I have an issue where my 'Desktop/Screensaver' prefs seem to be corrupt somehow. When I click on that icon in System Preferences, it stalls and I get the spinning ball, thus resulting in a force quit. After reading a Mac Format magazine where someone wrote in with a similar issue, they said to trash various prefs (did that and made no difference) and if that didn't work, try creating a New User account (therefore creating brand new system prefs) and move your stuff over.
Well, I've created the New User account, but I can't figure out how to move/copy my stuff into the user folders. After copying and attempting to move stuff in, I see folders with a red circle with a white line through it (like a 'no entry' sign).
Any clue as to how this can be done? All I'm trying to do is to reinstate the system prefs so they are not corrupt anymore on my log-in.

No. Not the main Library folder. Make absolutely sure you are in the Home Library folder and not the main Library folder.
Your Home Library folder is hidden in Lion. To get to it, in the Finder menu, select GO and hold the option key down. Select Library in the submenu. The Finder window will open in your Home Library. This is where your user prefs are stored.
Once there, you will see the Preferences folder. Open it up, select all items within it and move them to the trash. You will need to restart in order for the new Finder preferences to be recreated.
Once you restart, then you will be back to the default preferences to the system and all applications. And yes, it will affect all settings including your Dock, just as logging into a new user. You will have to reset everything there also.
If you wish to do a selective method, instead of deleting all preferences, try deleting the one associated with your problem. Screen saver problems should be affected by the system preferences, so try deleting this:
com.apple.systempreferences.plist
com.apple.systempreferences.plist.lockfile
Note that when you delete system file preferences, a restart will be required. For applications, just quit the application before trashing preference files.

How to insert a tumbler blog into muse web site?

Hey I was wondering if you know how to insert a tumbler blog into adobe muse? I have a tumbler account but would like to use it in adobe muse. how can I add it to my blog page in muse for desktop?

Goto your Tumblr account and then view it when you're logged out ... the URL link should look something like this?:
http://my-tumblr-blog.tumblr.com
Now copy & paste that URL link and insert it into this code snippet:
<iframe src="http://my-tumblr-blog.tumblr.com" onLoad="calcHeight();" scrolling="YES" frameborder="0" width="660" height="950" name="resize" id="resize"></iframe>
Now copy and paste this edited snippet into the Muse page where you want your Blog ... set the correct width and height in the code (see above) to fit your page ...
Cutomize it:
I would suggest customizing your Blog with the built-in customize HTML section to tweak the embedded Blog page ... i.e. turn off some of the Tumblr sections like Header, Description, etc, if you don't want them ...
Better still go over to this Tumblr Theme site and create a nice custom theme where you can do it all yourself ...
Then after that still use the snippet code above once you have copied & pasted the new customised Tumblr HTML into you Tumblr Blog:
http://www.totallylayouts.com/tumblr-generator/
The art is to streamline your Blog as much as possible so you get the most screen estate shown in Muse, because as an inserted iFrame widget you do lose a bit ...
cheers,
Gem

How to Insert a Landscape Page Into a Portrait Document?

How to Insert a Landscape Page Into a Portrait Document?
i use pages 5.2
thanks

You can't. But you could add a text box and rotate it (select the box, click arrange, rotate).

How to insert a gif file into a table?

Hi,
I need to insert a gif file into a table. Can anyone tell me where I can find the information on how to create this kind of table, how to insert a gif file into a table and how to select?
Thanks,
Helen

Hi Helen,
You could read about that in the documentation which is available online.
For a starter: BLOB. And I bet there are many examples to be found on the web.
Good luck. :)
Regards,
Guido

Can any one out there tell me how to insert a zoom tool into my slide show in dreamweaver CS5.5

Hi there
Can any one out there tell me how to insert a zoom tool into my slide show in dreamweaver CS5.5
My slide show consists of lots of thumb nails of paintings under a large painting.
When the small painting thumb nail is clicked the large painting appears.
I would like to be able to enlarge all areas of the large painting when a zoom tool is placed over areas of the large painting.
Really appreciate any one help.

Here's the Dreamweaver forum...
http://forums.adobe.com/community/dreamweaver/dreamweaver_general

How to insert one table data into multiple tables by using procedure?

How to insert one table data into multiple tables by using procedure?

Below is the simple procedure. Try the below
CREATE OR REPLACE PROCEDURE test_proc
AS
BEGIN
INSERT ALL
INTO emp_test1
INTO emp_test2
SELECT * FROM emp;
END;
If you want more examples you can refer below link
multi-table inserts in oracle 9i
Message was edited by: 000000

Could someone help me out how to insert a Node properly into a DOM?

I am trying to insert a Node built from a String to a DOM.
Here is how I created the Node
               Detail = "<Detail><Msg>Detail Message</Msg></Detail>";
               prolog = "<?xml version="1.0" encoding="UTF-8"?>";
               Node DetailNode = null;
               Document DetailDoc = null;
               if( Detail != null ){
                    Detail = prolog + BiometricDetail;
                    DetailDoc = xp.XML2DOM( BiometricDetail ); // transform a XML String into a DOM.
                    DetailNode = BiometricDetailDoc.getDocumentElement();
Here is how I created the DOM
               javax.xml.parsers.DocumentBuilderFactory factory = javax.xml.parsers.DocumentBuilderFactory.newInstance();
               javax.xml.parsers.DocumentBuilder builder = factory.newDocumentBuilder();
               Document document = builder.newDocument();
               Element beeE = document.createElement("BeeSets");
               Element grpE = document.createElement("Group");
               bioE.appendChild( grpE );
               // the document looks like "<BeeSets><Group></Group><BeeSets>";
               // After inserting the Node DetailNode, I want it to look like
               // "<BeeSets><Group><Detail><Msg>Detail Message</Msg></Detail></Group><BeeSets>";
Now when I tried to insert the node DetailNode to the DOM document, I tried
1) document.importNode( DetailNode, true );
No exception was thrown. But when I transformed the DOM document back to a String, I could not see the information from the newly imported Node DetailNode.
When I tried
          grpE.insertBefore( BiometricDetailNode, dataE );
I got the following exception.
     org.w3c.dom.DOMException: WRONG_DOCUMENT_ERR: A node is used in a different document than the one that created it.
     at org.apache.xerces.dom.ParentNode.internalInsertBefore(Unknown Source)
     at org.apache.xerces.dom.ParentNode.insertBefore(Unknown Source)
     at com.jadcs.bioidentity.role.base.RP.getNodes(RP.java:497)
2) document.adoptNode( DetailNode );
I got the following exception.
     java.lang.ClassCastException: org.apache.xerces.dom.DocumentImpl
     at org.apache.xerces.dom.DeferredTextImpl.synchronizeData(Unknown Source)
     at org.apache.xerces.dom.NodeImpl.setOwnerDocument(Unknown Source)
     at org.apache.xerces.dom.ParentNode.setOwnerDocument(Unknown Source)
     at org.apache.xerces.dom.ElementImpl.setOwnerDocument(Unknown Source)
     at org.apache.xerces.dom.ParentNode.setOwnerDocument(Unknown Source)
     at org.apache.xerces.dom.ElementImpl.setOwnerDocument(Unknown Source)
     at org.apache.xerces.dom.CoreDocumentImpl.adoptNode(Unknown Source)
     at com.jadcs.bioidentity.role.base.RP.getNodes(RP.java:509)
3) detailStr = "<Detail><Msg>Detail Message</Msg></Detail>";
Element detailE = document.createElement("Detail");
detailE.setTextContent( detailStr );
grpE.appendChild( detailE );
This way gives result like "<BeeSets><Group><Detail><Detail><Flash>On</Flash></Detail></Detail></Group><BeeSets>";
The content is messed up.
Could someone help me out at how to insert a Node properly into a DOM? Thank you very much.

Said another way, importNode actually only makes and returns a copy of the node you gave it (it will be a deep copy only if you pased true as the second parameter), but where the new dom you called import on is owner.
So what you need to do is more like this:
Node tempNode = domYouAreAddingTheNodeTo.importNode(node2copy,true); //true if you want a deep copy
domYouAreAddingTheNodeTo.appendNode(tempNode);You can also traverse to any point in the DOM and insert the node there with the same method, but you always have to import first so that the DOM has a copy of the node that it owns.

How to insert application form id into the form template

Similar Messages

Maybe you are looking for