How to insert text in the text-id using BDC

Hi Friends,
I m using the BAPI to upload the data for a transaction .
In that transaction there are some text id's are created to insert text like 'Container number'.
I want to insert the text in that text id . But it not a field. Text ids are having object no and table and number .
Is there any function like 'READ_TEXT' which we use to retrieve the text form text ids to write text in text ids ?
So that I can use that function to insert the text in the text ids.
Thanxs.

Hi Umesh,
READ_TEXT is used to Read the text , but SAVE_TEXT is used to save the text. but for reading or saving you need correct iD's and text objects.
Regards
vijay

Similar Messages

How to insert multiple line items in fv60 using bdc.

Hi all,
 How to insert multiple line items in fv60 using bdcs

hi
chk this
DATA : IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
DATA : IT_MESSAGES LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA : V_EBELP(30) , V_MENGE(30) , V_WERKS(30), V_EMATN(30) ,
V_PEINH(30).
DATA : FILE TYPE STRING, V_MSG(100) , V_IND(2) TYPE N , FLAG VALUE 'X'.
PARAMETERS: P_FILE(50) TYPE C DEFAULT 'C:\ME21_TEST'.
DATA : BEGIN OF ITAB OCCURS 0,
 IND(02),
 LIFNR_001(010),
data element: BSART
 BSART_002(004),
data element: BEDAT
data element: EKORG
 EKORG_004(004),
 EKGRP_006(003),
data element: LPEIN
 LPEIN_005(001),
data element: EMATNR
 EMATN_01_007(018),
data element: EWERK
 WERKS_01_008(004),
data element: EPEIN
 PEINH_01_009(006),
data element: EWERK
 MENGE_01_013(017),
data element: AUFEP
 EBELP_014(005),
data element: AUFEP
 END OF ITAB.
START-OF-SELECTION.
FILE = P_FILE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
 FILENAME = FILE
 FILETYPE = 'ASC'
 HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
 DATA_TAB = ITAB
EXCEPTIONS
 FILE_OPEN_ERROR = 1
 FILE_READ_ERROR = 2
 NO_BATCH = 3
 GUI_REFUSE_FILETRANSFER = 4
 INVALID_TYPE = 5
 NO_AUTHORITY = 6
 UNKNOWN_ERROR = 7
 BAD_DATA_FORMAT = 8
 HEADER_NOT_ALLOWED = 9
 SEPARATOR_NOT_ALLOWED = 10
 HEADER_TOO_LONG = 11
 UNKNOWN_DP_ERROR = 12
 ACCESS_DENIED = 13
 DP_OUT_OF_MEMORY = 14
 DISK_FULL = 15
 DP_TIMEOUT = 16
 OTHERS = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SORT ITAB BY IND.
START-OF-SELECTION.
LOOP AT ITAB.
REFRESH IT_MESSAGES.
V_IND = V_IND + 1.
AT NEW IND.
READ TABLE ITAB INDEX SY-TABIX.
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0100'.
PERFORM BDC_FIELD USING 'EKKO-LIFNR'
 ITAB-LIFNR_001.
PERFORM BDC_FIELD USING 'RM06E-BSART'
 ITAB-BSART_002.
*perform bdc_field using 'RM06E-BEDAT'
 ITAB-BEDAT_003.
PERFORM BDC_FIELD USING 'EKKO-EKORG'
 ITAB-EKORG_004.
PERFORM BDC_FIELD USING 'RM06E-LPEIN'
 ITAB-LPEIN_005.
PERFORM BDC_FIELD USING 'EKKO-EKGRP'
 ITAB-EKGRP_006.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '/00'.
ENDAT.
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0120'.
CONCATENATE 'EKPO-EMATN(' V_IND ')' INTO V_EMATN.
PERFORM BDC_FIELD USING V_EMATN
 ITAB-EMATN_01_007.
CONCATENATE 'EKPO-WERKS(' V_IND ')' INTO V_WERKS.
PERFORM BDC_FIELD USING V_WERKS
 ITAB-WERKS_01_008.
CONCATENATE 'EKPO-PEINH(' V_IND ')' INTO V_PEINH.
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0120'.
PERFORM BDC_FIELD USING V_PEINH
 ITAB-PEINH_01_009.
*CONCATENATE 'EKPO-MENGE(' V_IND ')' INTO V_MENGE.
*perform bdc_dynpro using 'SAPMM06E' '0120'.
*perform bdc_field using V_MENGE
 ITAB-MENGE_01_013.
*CONCATENATE 'EKPO-EBELP(' V_IND ')' INTO V_EBELP.
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0120'.
PERFORM BDC_FIELD USING 'RM06E-EBELP'
 ITAB-EBELP_014.PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '/00'.
AT END OF IND.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '=BU'.
ENDAT.
CALL TRANSACTION 'ME21' USING IT_BDCDATA MODE 'A'
 UPDATE 'S'
 MESSAGES INTO IT_MESSAGES.
 LOOP AT IT_MESSAGES WHERE MSGTYP = 'E' OR MSGTYP = 'A'.
 IF FLAG = 'X'.
 CALL FUNCTION 'BDC_OPEN_GROUP'
 EXPORTING
 CLIENT = SY-MANDT
 DEST = FILLER8
 GROUP = 'GAMY_FAILURE'
 HOLDDATE = FILLER8
 KEEP = 'X'
 USER = SY-UNAME
 RECORD = FILLER1
 PROG = SY-CPROG
 IMPORTING
 QID =
 EXCEPTIONS
 CLIENT_INVALID = 1
 DESTINATION_INVALID = 2
 GROUP_INVALID = 3
 GROUP_IS_LOCKED = 4
 HOLDDATE_INVALID = 5
 INTERNAL_ERROR = 6
 QUEUE_ERROR = 7
 RUNNING = 8
 SYSTEM_LOCK_ERROR = 9
 USER_INVALID = 10
 OTHERS = 11
 IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
 CLEAR FLAG.
 ENDIF.
 CALL FUNCTION 'BDC_INSERT'
 EXPORTING
 TCODE = 'ME21'
 POST_LOCAL = NOVBLOCAL
 PRINTING = NOPRINT
 SIMUBATCH = ' '
 CTUPARAMS = ' '
 TABLES
 DYNPROTAB = IT_BDCDATA
 EXCEPTIONS
 INTERNAL_ERROR = 1
 NOT_OPEN = 2
 QUEUE_ERROR = 3
 TCODE_INVALID = 4
 PRINTING_INVALID = 5
 POSTING_INVALID = 6
 OTHERS = 7
 IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
 ENDIF.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
 ID = IT_MESSAGES-MSGID
 LANG = 'EN'
 NO = IT_MESSAGES-MSGNR
 V1 = IT_MESSAGES-MSGV1
 V2 = IT_MESSAGES-MSGV2
 V3 = IT_MESSAGES-MSGV3
 V4 = IT_MESSAGES-MSGV4
IMPORTING
 MSG = V_MSG
EXCEPTIONS
 NOT_FOUND = 1
 OTHERS = 2
 WRITE : / V_MSG.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDLOOP.
 ENDLOOP.
IF FLAG NE 'X'.
CALL FUNCTION 'BDC_CLOSE_GROUP'
 EXCEPTIONS
 NOT_OPEN = 1
 QUEUE_ERROR = 2
 OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
 Start new screen *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROGRAM.
IT_BDCDATA-DYNPRO = DYNPRO.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
ENDFORM.
 Insert field *
FORM BDC_FIELD USING FNAM FVAL.
 CLEAR IT_BDCDATA.
 IT_BDCDATA-FNAM = FNAM.
 IT_BDCDATA-FVAL = FVAL.
 APPEND IT_BDCDATA.

How to insert data into the mysql table by giving as a text file

Hi,
Any one know's how to insert data into the mysql table by giving as a text file as the input in JSP.Please respond ASAP.
Thanks:)

At least you can try StringTokenizer to parse your text files. Or download a text JDBC driver to parse your files, for instance, HXTT Text(www.hxtt.net) or StelsCSV(www.csv-jdbc.com).

How can I get just the text to resize, rather than the entire web page?

I used to be able to re-size just text on a webpage by typing Ctrl + +. Today, the entire webpage re-sizes, and when I move to another page it reverts. (I see this mostly in Facebook.). Why did this change, and can I go back to having just the text re-size?

''How can I get just the text to resize -- zoom text only''
steps
#"Alt" if no menu bar, then
# View > Zoom > Zoom Text Only
Zoom text of web pages - MozillaZine Knowledge Base
:http://kb.mozillazine.org/Zoom_text_of_web_pages
 Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.

How do I print just the text in a power point opened in preview

How do I print just the text in a power point opened in preview

In the front panel, right click on the listbox object and select create>attribute node.
In the diagram click on the attribute node and select "Item Names".
Connect the desired array of string to the attribute node.
BigBen

How do I create 2 motion tweens for one line of text? the text needs to "fly-in-right", I can do that,

how do I create 2 motion tweens for one line of text? the text needs to "fly-in-right", I can do that, then it needs to "fly-out-bottom" again, I can do that, but not on the same line of text...any ideas...

my question
1- there is any way to assign the Fetch process to specific region so the process take all item in these region only.
2- how can create manual process to fetch row into specific items in page ( i tray these code
SELECT col1, col2, col3 ....
INTO :P1_ITEM1, :P1_ITEM, :P1_ITEM...
FROM table
WHERE id = :P_id ) but no data retrieve .
I do not think that it is possible to have more than one Automated Row Fetch process in a given page. See the thread:
ORA-01403: no data found : Unable to fetch row multiple automated row fetch
On your second question, the manual process should work provided:
P_ID has a value when the process executes. You can do it this way:
i. Make this process as a on-load After/Before header process
ii. Make sure that P_ID page item has value when the process executes (set it from another page or before the pl/sql process executes)

How to clear the text in the Text Editor

Hi all,
I created a Text editor and also i am having language field in the screen.
whenever i change the language auomatically the text has to change when the text exists for that
language.
this is working fine, but when the Text exist , the text editor should be blank.
But it is carrying the Previous editor text itself into it .
How to clear the text in the Editor.
Regards,
Madhavi

Hello Madhavi
The simple report ZUS_SDN_TEXTEDIT_CONTROL shows how to switch the texteditor contents when changing the language.
*& Report ZUS_SDN_TEXTEDIT_CONTROL
*& Thread: how to clear the text in the Text Editor
*& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="1145272"></a>
*& By default the itab GT_OUTTAB contains texts in DE and EN.
*& To switch the language directly enter into the command window:
*& LANGU=DE, LANGU=EN or LANGU=FR
REPORT zus_sdn_textedit_control.
TYPE-POOLS: abap.
TYPES: ty_t_text TYPE TABLE OF as4text
 WITH DEFAULT KEY.
TYPES: BEGIN OF ty_s_outtab.
TYPES: language TYPE spras.
TYPES: text TYPE ty_t_text.
TYPES: END OF ty_s_outtab.
TYPES: ty_t_outtab TYPE STANDARD TABLE OF ty_s_outtab
 WITH DEFAULT KEY.
DATA: gt_outtab TYPE ty_t_outtab,
 gs_outtab TYPE ty_s_outtab.
DATA: gd_language TYPE spras.
DATA: go_docking TYPE REF TO cl_gui_docking_container,
 go_textedit TYPE REF TO cl_gui_textedit.
DATA: gd_okcode TYPE ui_func,
 gd_repid TYPE syst-repid.
START-OF-SELECTION.
PERFORM fill_texts.
gd_language = syst-langu.
PERFORM init_controls.
* Link the docking container to the target dynpro
gd_repid = syst-repid.
CALL METHOD go_docking->link
 EXPORTING
 repid = gd_repid
 dynnr = '0100'
* CONTAINER =
 EXCEPTIONS
 OTHERS = 4.
IF sy-subrc NE 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM set_text_editor.
* NOTE: dynpro does not contain any elements
" ok-code => GD_OKCODE
CALL SCREEN '0100'.
* Flow logic of dynpro (does not contain any dynpro elements):
*PROCESS BEFORE OUTPUT.
* MODULE STATUS_0100.
*PROCESS AFTER INPUT.
* MODULE USER_COMMAND_0100.
END-OF-SELECTION.
*& Module STATUS_0100 OUTPUT
* text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'. " contains push button "DETAIL"
* SET TITLEBAR 'xxx'.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
* text
MODULE user_command_0100 INPUT.
TRANSLATE gd_okcode TO UPPER CASE.
CASE gd_okcode.
 WHEN 'BACK' OR
 'EXIT' OR
 'CANC'.
 SET SCREEN 0. LEAVE SCREEN.
 WHEN 'LANGU=DE' OR
 'LANGU=EN' OR
 'LANGU=FR'.
 PERFORM get_text_editor.
 SPLIT gd_okcode AT '=' INTO gd_okcode gd_language.
 PERFORM set_text_editor.
 WHEN OTHERS.
ENDCASE.
CLEAR: gd_okcode.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form FILL_TEXTS
* text
* --> p1 text
* <-- p2 text
FORM fill_texts .
* define local data
DATA: ld_string TYPE string.
gs_outtab-language = 'EN'. REFRESH: gs_outtab-text.
ld_string = 'Good morning'.
APPEND ld_string TO gs_outtab-text.
APPEND gs_outtab TO gt_outtab.
gs_outtab-language = 'DE'. REFRESH: gs_outtab-text.
ld_string = 'Guten Morgen'.
APPEND ld_string TO gs_outtab-text.
APPEND gs_outtab TO gt_outtab.
gs_outtab-language = 'FR'. REFRESH: gs_outtab-text.
ld_string = space.
APPEND ld_string TO gs_outtab-text.
APPEND gs_outtab TO gt_outtab.
ENDFORM. " FILL_TEXTS
*& Form INIT_CONTROLS
* text
* --> p1 text
* <-- p2 text
FORM init_controls .
CREATE OBJECT go_docking
 EXPORTING
 parent = cl_gui_container=>screen0
* repid =
* dynnr =
* side = dock_at_left
* extension = 50
* style =
* lifetime = lifetime_default
* caption =
* metric = 0
 ratio = 90
* no_autodef_progid_dynnr =
* name =
 EXCEPTIONS
 cntl_error = 1
 cntl_system_error = 2
 create_error = 3
 lifetime_error = 4
 lifetime_dynpro_dynpro_link = 5
 OTHERS = 6.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT go_textedit
 EXPORTING
* max_number_chars =
* style = 0
* wordwrap_mode = wordwrap_at_windowborder
* wordwrap_position = -1
* wordwrap_to_linebreak_mode = false
* filedrop_mode = dropfile_event_off
 parent = go_docking
* lifetime =
* name =
 EXCEPTIONS
 error_cntl_create = 1
 error_cntl_init = 2
 error_cntl_link = 3
 error_dp_create = 4
 gui_type_not_supported = 5
 OTHERS = 6.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " INIT_CONTROLS
*& Form SET_TEXT_EDITOR
* text
* --> p1 text
* <-- p2 text
FORM set_text_editor .
BREAK-POINT.
CLEAR: gs_outtab.
READ TABLE gt_outtab INTO gs_outtab
 WITH KEY language = gd_language.
CALL METHOD go_textedit->set_text_as_stream
 EXPORTING
 text = gs_outtab-text
 EXCEPTIONS
 error_dp = 1
 error_dp_create = 2
 OTHERS = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " SET_TEXT_EDITOR
*& Form GET_TEXT_EDITOR
* text
* --> p1 text
* <-- p2 text
FORM get_text_editor .
CLEAR: gs_outtab.
CALL METHOD go_textedit->get_text_as_stream
 EXPORTING
 only_when_modified = cl_gui_textedit=>true
 IMPORTING
 text = gs_outtab-text
* is_modified =
 EXCEPTIONS
 error_dp = 1
 error_cntl_call_method = 2
 OTHERS = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
MODIFY gt_outtab FROM gs_outtab
 TRANSPORTING text
 WHERE ( language = gd_language ).
ENDFORM. " GET_TEXT_EDITOR
Regards
Uwe

How can I delete all the text in one story?

Yeah, it's a dumb question. I've done some pretty complex things using ExtendScript, yet I can't seem to figure out how to remove all of the text in one story.
Any help would be greatly appreciated.
-Dan.

myStory.contents = "";
myStory.texts[0].remove();
either should do the job.
Dave

How do I programatically change the text in a listbox that is contained in a cluster?

How do I programatically change the text in a listbox that is contained in a cluster?

In the front panel, right click on the listbox object and select create>attribute node.
In the diagram click on the attribute node and select "Item Names".
Connect the desired array of string to the attribute node.
BigBen

How to include variable in the text column in report painter?

Dear Expert,
Would like to seek for your help to include How to include variable in the text column in report painter?Please advice.
Thank you.
Regards,
Karen
Edited by: Karen Swee Ping Ho on Jun 17, 2011 2:48 AM

Hi,
Thank you for the promt reply.
1) How I include the variable in the column header to display fiscal year which I have selected from the selection screen?
which variable should i use?
2) Where can i find more information about the characteristic and which variable to be use base on the characteristic?
For example: I would like to display the fiscal year from the selection screen/input screen when execute the report which also will reflected to the element definition and will display the fiscal year also in the column text?
3) Kindly advise base on question 2, the variable that i use in element definition it will also display in selection screen?
4) When execute the report the first selection screen input parameter it obtain from where it is from element definition?
5) Please advice how to be done when report execute with first screen input selection will also reflect the element definition of column and rom with the selection of the fiscal year?
Please help.
many thanks
Edited by: KH on Jun 18, 2011 7:18 AM

I was in a Pages Doc and inadvertently had the Caps Lock on. How Can I change all the text I typed from Upper Case to Lower Case?

I was in a Pages Doc and inadvertently had the Caps Lock on. How Can I change all the text I typed from Upper Case to Lower Case?

Several protocols may be used.
Here I describe two of them.
(1) the one which I use : install and use the "Convert to Lowercase" service available in the free WordService
(2) copy your text, paste in TextEdit and enter the Edit menu.
I guess that you will recognize the items in your English menu.
I apologize but I don't know the English items.
Yvan KOENIG (VALLAURIS, France) jeudi 16 février 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.3
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k

When saving a page under text format, the text is limited to 80 columns only, how to extend to 120 columns

When I save a page under text format, the text is limited to 80 columns only, how to extend to 120 columns (or more)?

HI K,
This is the Numbers (Mac OS) forum. Your question about Numbers for iOS will probably get better results posting in the iWork for iOS area. the link will take you there.
Regards,
Barry

How to copy and paste the text in Russian - 'command+c' erases it

How to copy and paste the text in Russian - 'command+c' erases it

I want to publish a book with Blurb. They don't have Russian fonts, so I have to type the text in Russian in Notes in my iPad, send it to my e-mail box, and then open the e-mail box in Mac, and copy and paste the text into the book template of Blurbs. I don't know how to make a Russian keyboard in Mac to be able to type quickly. I asked about it in the Apple store, and they showed me how to find a Russian keyboard in the net, but it takes much time to type using a screen keyboard, and the texts also cannot be copied and pasted, when they are in Russian. They are erased when I press 'command+C", and all I have is a single letter 'c' instead. No problems with texts in English. Maybe Russian is not supported for copying and pasting?:(

I bought versions for iPad and for MacBook. At synchronization of documents on MacBook all smilies from the Emoji keyboard disappeared. It is impossible to insert them into the text manually. Smiles of Emoji are supported by the program for Mac? Help to s

I bought versions for iPad and for MacBook. At synchronization of documents on MacBook all smilies from the Emoji keyboard disappeared. It is impossible to insert them into the text manually.
Smiles of Emoji are supported by the program for Mac?
Help to solve a problem, please.

Same thing happened to me with my peruvian credit card in the peruvian app store, I want to buy an app, but it says that my credit card is "not supported in the Peruvian app store"

How to insert ur own documentaion text from harddisk to sapscript

how to insert ur own documentaion text from harddisk to sapscript

You should upload this standard text to SO10, then you can simply include it into your sapscript.
Regards,
RIch Heilman

How to insert text in the text-id using BDC

Similar Messages

Maybe you are looking for