How to install struct2 in netbeans and eclipse

how to install struct2 in netbeans and eclipse

Hi ganesh_delhi1980,
It's Struts 2 and not struct2.
You may verify what version of Struts is already installed on your IDE, you may also download and install packages :
- NetBeans : Tools > Plugins
- Eclipse : Help > Software updates...

Similar Messages

How to install Workshop for WebLogic and WebLogic Portal?

Hi All,
I am new to Weblogic Portal. I would like to start learning Oracle Weblogic Portals..
Can anyone please guide me, how to install Workshop for WebLogic and WebLogic Portal?
As per the ""Tutorials – Getting Started with WebLogic Portal"" (http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/tutorials/setup_dev_env.html)
we need to install the Workshop for WebLogic and WebLogic Portal.
Please suggest me where should i get the required environments/IDE?
Thanks,
Harish.

Hi Harish
1. If this is your first time with Weblogic Portal, I would recommend to download the latest Weblogic Portal Software Rel 10.3.2 from this bottom link. Check Accept Radio button, for windows download windows installer. Its about 1 GB file. This software includes Eclipse IDE, Weblogic Server and Weblogic Portal.
http://www.oracle.com/technology/software/products/wlp/index.html
2. During the installation process, make sure at one point you select Custom mode (NOT default Typical mode). In next following screens you will see all bundles checked EXCEPT for Samples. So make sure you check Samples Check box both under Weblogic Server and Weblogic Portal. Then proceed. This will install full Weblogic Workshop (Eclipse IDE), Weblogic Server and Weblogic Portal. This is the good installation package. Also it will install samples for Portal and Server. If you select all default typical mode, it will NOT install samples. You can install samples later on also, but its good at installation time itself you select custom and check Samples also.
3. WLP 10.3.2 uses Eclipse IDE. If you are familiar with Eclipse IDE this should be helpful. Otherwise also, its ok.
4. For learning WLP, in Eclipse IDE, you need to create Portal EAR Project, then Portal Web Project. Inside portal web project create simple jsp hello world portlets and a simple portal.
5. For Deploying and Testing Portal application you need to create Portal Domain using config wizard. You can see this from Start -> Programs -> Oracle Weblogic Portal shortcut -> Weblogic Server -> Tools -> Configuration Wizard.
6. You can start Workshop IDE from Start -> Program Files -> Oracle Weblogic Portal ...-> Eclipse For Weblogic 10.3.2
Here are the links for quick start guide for portal development. Please do refer them.
http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/tutorials/index.html
http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/quickstart/newproject.html
HTH
Ravi Jegga

Using NetBeans and Eclipse to drag and drop forms, controls etc

Hi, can you use NetBeans and Eclipse to drag and drop like say with C# in MS Visual Studio ?
like forms and listboxes, textboxes etc ??

And [this is a good place to start|http://java.sun.com/docs/books/tutorial/uiswing/index.html]
db

How to install ias 1.0 and 8.1.6.1 on a single red hat 6.1 machine

How to install ias 1.0 and 8.1.6.1 on a single red hat 6.1 machine.
i am expecting a lot of problems during the ias installation, the db is working fine. is posible to install both products over the same machine?

You should be able to iAs and the DB on the same machine but you will need to do the following:
1. Create a new ORACLE_HOME for iAS (unsetenv ORACLE_HOME and setenv ORACLE_HOME to new home)
2. Shutdown the DB in the existing Oracle home and change the corresponding listener port in listener.ora to a port other than the typical default (1521)
3. Install iAS in the new Oracle home
4. Make sure none of the listeners in the listener.ora under the new Oracle home are listening on the same port as that which you set for the existing DB listener.
In general it is advisable to install iAS EE on a different machine than the origin database to realize the full benefits of iCache (EE)

How to install JUnit plug-in in Eclipse

i use eclipse 3.11 and i've downloaded eclipse-test-framework-3.1.1 and eclipse-Automated-Tests-3.1.1 two zip file. i've read the instruction, but still could not figure out how to install.
my eclipse was independently installed in d drive. my questions are
(1) should i install the above two plug-in inside of the eclipse file?
(2) should i install both of the files?
(3) do i have to change classpath or path after installation?
will appreciate your input....

For every plugin I've used, I just unzipped it in the
Eclipse/plugins directory & it worked fine. If that
approach fails, you probably need to find an Eclipse
forum.I just checked the plug-in details. Java Development Tools JUnit runtime support is built in eclipse 3.11. so i guess i don't have to install again....

How to Install the Downloaded NetBeans(*.nbm) Modules for Sun Java Studio

Dear All,
I have downloaded NetBeans Modules files with Extension *.nbm, and they are not getting installed, when I double click on them, or if I go through the Update Center and Select the Downloaded Modules even then also they are not getting installed, so please tell me the procedure how to install them.
mahesh.

It would be helpful to know which version of Java SE you are using, what NetBeans modules are you attemping to install, and any pertinent error messages that arise when you try to install the modules. As Jin_B pointed out, check the system/ide.log file in your .jstudio directory for possible error messages.

How to install Java3d into netbeans 6.5

I recently downloaded the Java 3D file : j3d-1_5_2-xxxxxx but I don't really know how to "install" it. I looked and found a thing on how to insall it on netbeans but the place they are telling me to go to doesn't exist. I am using netbeans 6.5 and supposedly you are supposed to install the J3D.nbm or something into netbeans but i can't find that inside of my downloaded folder. Is there something I did wrong i.e. downloaded the wrong thing, are looking in the wrong place, are missing somthing please tell me.
Thanks
Thimbletack

Just posting an update. I found that a place that says you need to go here to download the module for netbeans to install it:
http://java3d.netbeans.org/
but that doesn't reallys show how to install java 3d or anything, it doesn't even have a download button for the module. I got that information here:
http://java3d.j3d.org/faq/editors.html
but i really just don't know how to install this thing. Can anyone help?

Glassfish with NetBeans and Eclipse

Hi,
I have both NetBeans Java EE and Eclipse IDE for Java EE Developers installed on my laptop. With NetBeans Java EE I have the installed the Glassfish and Tomcat server . Can I use/'integrate' this same Glassfish and Tomcat server with my Eclipse installation or is it advisable to install a "standalone" Glassfish &Tomcat server specific for my Eclipse environment?
Thanks.
Guy

Hi!
Yes you can integrate/use Glassfish and Tomcat with your Eclipse installation.
For Glassfish support in Eclipse (assuming you are using Eclipse Luna) you have to install first: http://marketplace.eclipse.org/content/glassfish-tools-luna
The integration is really simple: https://blogs.oracle.com/oepe/entry/getting_started_with_glassfish_4
Hope hits help,
Kind regards.

How to install jdom in NetBeans

hi,
I use netbeans as my IDE and need to use jdom. At the moment it says the package doesn't exist. Can someone please tell me how to install it.
Thanks

for netbeans features (code completion, reference checking) to work properly the JDOM jars need to be in the classpath of the application you are building.
So download Xerces2 or find it in an app that uses it (tomcat or ANT for example) and then add the necessary jars to the libraries of your application. Check the xerces2 documentation to know what jars.
http://xerces.apache.org/xerces2-j/

P55-CD53, how to install SATA AHCI drivers and Matrix Storage Manager?

Please excuse my noobness as this is for my first PC build and much of it is Greek to me, but could someone please inform/educate me as to what the following drivers (link) are for and which need to be installed after a fresh installation of Windows 7 Pro x64? Do I need to install all of them because some of these appear to be redundant, just from different manufacturers, or am I mistaken? I have a single 500GB HDD but will probably add more down the road.
JMicron JMB36x IDE Drivers (including floppy driver)
Description   XP/Vista/Win7 Ver: 17.49.04.WHQL
Update Date   2009-07-27
Your System OS   XP/Vista/Win7 32/64bit
(3989KB)
Intel P55 AHCI / RAID Drivers
Description   Ver: 8.9.0.1023
Update Date   2009-07-24
Your System OS   XP/Vista/Win7 32/64bit
(23048KB)
Intel P55 SATA RAID Driver (For floppy driver)
Description   Intel P55 SATA RAID driver
1. Extract the file and Copy all files to the floppy.
2. Press F6 to install driver through the floppy when booting and loading RAID function.
Update Date   2009-07-24
Your System OS   XP/Vista/Win7 32/64bit
(443KB)
JMicron IDE/SATA RAID Drivers (with AP)
Description   XP/Vista Driver Version: 1.17.43.05
For floppy install:
Please copy all the directories and files in the "floppy" folder to the root directory of a floppy disk to create a pre-install disk for Win2K/WinXP/Win2003/WinXP 64bits/Win2003 64bits.
For example,
A:\amd64
\x32
txtsetup.oem
To enhance IDE transfer speed, we strongly recommend you install JMicron IDE/SATA Driver.
Update Date   2009-02-23
Your System OS   Windows Vista 32/64bit
(4032KB)
Windows XP 32bit
(4032KB)
Intel TPM Device Driver
Description   Intel Trusted Platform chipset driver
XP/Vista/Win7: 2.00.0000.00
Update Date   2007-11-02
Your System OS   Vista/Win7 32/64bit
(23KB)
Windows XP 32bit
(23KB)
On a side note, I have already flashed the BIOS to 1.4 using the Forum USB Flashing Tool (thanks!).

Thanks.
After booting from the Windows 7 disc, I selected Repair Windows, Load Drivers. Which specific controllers do I need to install for the P55-CD53 MB since there are multiple controllers listed for each of the four SATA compressed files?
Considering the multiple files and multiple controllers, is there no one out there with a P55-CD53 that has AHCI mode enabled that can give dumbed down instructions on how to do so?
The manual states "Select the appropriate RAID controller and press enter." Well... which one is the appropriate controller? Am I suppose to load the driver for all the AHCI controllers if that's even possible?
For the Intel P55 AHCI / RAID Drivers compressed file, these are the controllers available within F6flpy64\iaAHCI.inf:
Intel(R) ESB2 SATA AHCI Controller
Intel(R) ICH 10D/DO SATA AHCI Controller
Intel(R) ICH10R SATA AHCI Controller
Intel(R) ICH7M/MDH SATA AHCI Controller
Intel(R) ICH7R/DH SATA AHCI Controller
Intel(R) ICH8M-E/M SATA AHCI Controller
Intel(R) ICH8R/DH/DO SATA AHCI Controller
Intel(R) ICH9M-E/M SATA AHCI Controller
Intel(R) ICH9R/DO/DH SATA AHCI Controller
Intel(R) PCH SATA AHCI Controller
Intel(R) PCHM SATA AHCI Controller 4 Port
Intel(R) PCHM SATA AHCI Controller 6 Port
Also, regarding the dual BIOS controls for SATA/IDE/RAID settings previously mentioned, I believe SATA ports 1-6 are controlled via Intel and 7,8 are controlled via Jmicron. Considering my HDD is currently plugged into SATA 1, Jmicron probably isn't necessary for the moment.
Edit:
Turns out that none of the drivers for the controllers listed in iaAHCI.inf could be installed. However, I went ahead and installed the drivers listed for all the controllers in iaStor.inf. I reinstalled Windows 7 to get rid of the BSOD. I then installed the chipset drivers and Intel Matrix Storage Manager.

How to install the windows7 agent and monitor the same machine

Hi ,
I have installed OMS on Oracle Linux 5.7-64 bit machine. Now I am able monitor the OIM which is installed on Linux. I have some of oracle applications (domains) on windows7 machine. I want monitor the same. On em, agent deployment page I am not able to see the windows agents.
Can you please guide me how to install the agent on windows and monitor the same?
OEM version: 11.1.0.1
Thanks in advance
Regards,
Kishore Tummeti

If you just need to install some agents on Windows the best (imho) option is not to use the push option because getting Cygwin to run can take hours (if at all).
Here you find a good instruction how to install the agent by hand: http://www.peasland.net/?p=122
Sometimes the –silent mentioned in step 4b needs not to be put as second argument but as last argument.
Eric

How to install my onboard Networkcard and where do i find the drivers?

I have updated my computer with some hardware and i now need to install the sound and network drivers again. I think i found the sound drivers but i cant find the network driver. Anyone got a link for me? And how do you install these drivers? Just run the installfile and everything goes automatic or is it more complicated?
Btw: I have Windows XP on a 40gb harddisk and a maxtor 300gb harddisk on secondary master. But in windows xp it only show 127gb (i think i was). Why?
Thanks for all the help.
BTW: If anyone got any other nice pages to get my mainboard up to speed, bring it:)

Quote from: needahand on 06-October-05, 22:39:40
But in windows xp it only show 127gb (i think i was).
Windows needs SP1 or greater to recognize drives larger than 137GB. Install SP1 or SP2 and partition the remaining space via disk management.
And we can't give you any info on the network card without knowing what motherboard it is.
Good Luck
Jeremy

How to install SOAP Axis adapter and where is it available ??

Hi,
I heard that SOAP Axis adapter was not initially available for PI 7.0 and was introduced in some later support pack.When I checked the below url I found that some of the components are missing.
http://xi-dev.intranet.com:50000/XIAxisAdapter/MessageServlet
Can anyone please suggest how I can get that pack and where it will be available?
How to install it?
Thanks
Deepthi.

Hi Sunil,
Dont mind...one final question, they mentioned in the README file as below..
// Open the SDA archive using some unzip tool and replace the following empty
jar files with the those inclued in Axis 1.4 src package
axis.jar
commons-discovery-0.2.jar
commons-logging-1.0.4.jar
commons-net-1.0.0-dev.jar
wsdl4j-1.5.1.jar
When i checked in the Axis folder, I found so many files.
Do I need to just add this Axis zip file into aii_af_axisprovider.sda Archive file.?
If possible, It would be very helpful if you send the aii_af_axisprovider.sda file which you have deployed into your system?
Thanks
Deepthi

How to install sap licensce? and orcle licensce ?

hi friends
i have to install sap licensce in sap ecc 6.0 and solman.
how to get it from the marketplace we buyed sap licensce .
how to login from which client and which user ?
how to install the orcle licensce to my data base ?
please suggest me asap
thanks in advance
regards
raja

Hi Raja,
Use t code SLICENCE in your ecc6 and solman.
Determine the hardware key.
Go to sap market place. click on 'Keys & Requests' tab. Here select 'Request permanent license key' tab. Enter the required information. This way you'll get the license key.
Now go back to the SLICENSE in sap. select 'EDIT' - 'Install license key'' (F6).
Log in to client 000 with DDIC for installing the license.
As per my knowledge you dont need to install oracle key because, oracle comes in a bundle package with SAP.
Hope this helps.
Regards,
Pranay

How to install Studio, DataTools, SSIS and SSAS to SQL Server 2014 RTM DataWarehousing

I have fresh installation of VM. Plan is to build DW and SSAS OLAP Cube.
How to install needed services and tools as they are not installed as default?
If I click SQL Server Installation Center and choose Installation and New SQL Server, I'm guided to choose file, but don't know where to find.
Kenny_I

Hi Kenny_I,
According to your description, you want to add SQL Srever Data Tools, SQL Server Integration Services and SQL Server Analysis Services to your existing installation, so you click SQL Server Installation Center and choose Installation and New SQL Server,
nad now you are guided to choose file, right?
In this case, you need to choose the folder which contains SQL Server installation media. I have tested it on my local environment, after select correct folder and click "Ok" button, everything works fine.
Reference.
http://msdn.microsoft.com/en-us/library/ms143219.aspx
If you have any questions, please feel free to ask.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here
Charlie Liao
TechNet Community Support

How to install struct2 in netbeans and eclipse

Similar Messages

Maybe you are looking for