How to integrate with another dam to the asset finder

We have to use an external dam and I hope that I can write a connector to pull the dam images to show up in the asset finder (left pane in page design).   This a designer can drag and drop the images just like the images were in CQ DAM.  Is there any way to do that?  I can't find the documentation....

A good start point on how to customize the content finder can be found in this knowledge base article: http://helpx.adobe.com/cq/kb/CustomCFTab.html
As described in the article, you should review the existing ContentFinderTab implementations (see http://dev.day.com/docs/en/cq/current/widgets-api/index.html?class=CQ.wcm.ContentFinderTab) located in /libs/wcm/extensions/contentfinder and use one of these as a template for your own extension.

Similar Messages

  • How do I move organized photos from dropbox to iPhoto and share with another user on the same mac?

    I have about 3,500 photos sitting in dropbox and just purchased my first mac yesterday.  My husband and I each have our own Ipad and our own user id's on the mac.  I moved two of the folders to Iphoto and it shows up on my screen in the right folders.  However, on my Ipad, it shows all of them under one Photostream and not organized.  They don't show up on my husband's "side of the computer" at all. 
    So my questions are:
    1.  How does one mirror their file organization on the Ipad?
    2.  How does one share all of the folders with another user on the same Ipad so they can view folders, and add pictures to the folders if they like?
    Thanks!

    1.  How does one mirror their file organization on the Ipad?
    If you use the Photo Stream, the organisation in iPhoto will be lost - there is just one endless stream.  YOu could sync your photos using iTunes. Then you will see the synced albums in the Photos.app on the iPad.
    See this link:   iOS and iPod: Syncing photos using iTunes
    How does one share all of the folders with another user on the same Ipad so they can view folders, and add pictures to the folders if they like?
    On the same iPad?  Do you mean on the same mac?
    If you want to share an iPhoto library between two users on the same mac, the iPhoto library should be on a separate disk partition or even better, on a separate external disk. Then you can set the flag "Ignore ownership on this volume" to avoid permission problems. Both of you will be able to browse the iPhoto library and can edit the photos within.
    See this support document:  iPhoto: Sharing libraries among multiple users
    If both of you want to keep separate iPhoto libraries but share the photos, you could share selected albums as Shared PhotoStreams and invite each other to browse them. This would require iOS 7. Do you have iOS 7 on your iPad?  Each Shared Photo Stream will be shown as a separate album on your iPad .
         iCloud: Using and troubleshooting Shared Photo Streams
    Regards
    Léonie

  • How do I share a playlist from my itunes library with another user on the same computer?

    I would like to share a playlist with another uuser on the same computer.  We have separate itunes libraries on the same computer. How do gey my playlist from my library to hers?

    I'm not sure, but maybe if you activate home sharing. It should also share playlists, not only files.
    The only other way I can think of is to export the playlist and import for the other user.

  • HT3387 When I use pages the languages that I mainly use are English and Hebrew. The spellchecker works for English but not with Hebrew. How can I add another language to the spellcheck?

    When I use pages the languages that I mainly use are English and Hebrew. The spellchecker works for English but not with Hebrew. How can I add another language to the spellcheck?

    http://m10lmac.blogspot.com/2011/06/extra-spell-checking-dictionaries-for.html

  • New Windows 8.1 Connected to company NAS, now switching identities with another computer on the NAS

    So I recently installed a new Windows 8.1 computer and mapped a network drive to the company NAS.  Now, this new computer (let's call it Joe) has switched certain features with another computer on the NAS (let's call it Marie).
    - Joe and Marie have switched histories in Chrome
    - Joe has Marie's Chrome bookmarks
    - Marie can see and access Joe's mapped network drives
    - Joe's Chrome automatically brings up Marie's saved IDs and password for email and online databases
    However
    - Joe's computer identity remains Joe in computer properties
    - Other software besides Chrome are acting in the normal, separated fashion
    "Joe" has been using the computer a bit since I installed it, so I don't know everything that has been done to the computer.  What would make PCs partially switch identity like this, and how do I fix it?  Is there some way that
    Windows 8 maps network drives differently?  Is this a virus (both computers have BitDefender)?

    I will have to double check again to make sure I'm telling the truth (I've gone through so many iterations in the past weeks I can't remember which way is up :-)  but I believe that the drive was showing in offline files, but that attempting sync (even
    repeatedly) did not bring the drive contents back.  Which also begs the question, if the user has not made the drive "available offline" why would it be acting like it is?  I've considered actually making it available offline, but I don't want
    all of that data on his laptop and I'm also concerned that we'd then have more problems as he continues to work for hours and days on his offline copies.
    I should also add that I was able to work with the client on Friday and we were able to determine that the VPN is NOT dropping as we're able to ping devices on the LAN side immediately once the files disappear.  
    Cheers,
    Mike

  • How to communicate with another applet in different frame?

    Hello,evryone
    How to communicate with another applet in different frame?
    Can you give some advices?
    thank you!
    zhongboqing

    i faced this problem one year ago.It would be something like that:
    first you have to get the applet context 'getAppletContext()' (which is the current frame).
    Then get parent of that context 'getParent()' (which is the browser context).
    Then u can access the desired frame by its name. Finally you can access the desired applet located within this frame by

  • How to integrate with RMS system

    Hi experts,
      I want to integrate RMS(Retail Management System) with SAP PI system.
    Is it possible to integrate?
    If possible, Can you give me Idea How to integrate with this?
    Thanks & Regards,
    Poonam.

    > Want your more help. If I want to use SOAP adapter to integrate with RMS system.
    > So, what are the prerequisites are required in RMS system to be integrate with SAP PI through SOAP adapter?
    >
    Fist you have to make sure that RMS system showuld accept SOAP messages, that means u will send payload to RMS in the form of SOAP meesage using SOAP receriver Adapter.
    RMS system people have to provide URL , u will send data to address specified in URL.
    using Adapter is compmetely depend on Source or Taget system, betetr to talk with RMS system people like how they will take data from other systems,besed on that you can decided.
    Regards,
    Raj

  • How to integrate with java connnector in sap business one 2005

    hai,
    i have small doubt,
    how to integrate with java connnector in sap business one 2005
    thankig
    anand

    Anand,
    I am not sure of your exact question, but the SAP Business One SDK Help Center documentation contains all the information that you should need with respect to using the SAP Business One JCO connector.  You should read this documentation.
    Eddy

  • Please resolve the Error:Element Entry over laps with another entry of the same type

    Hi Buddies,
                    I have been trying to resolve the error : Element Entry over laps with another entry of the same type while entering salary to an employee.
    I have tried to resolve this issue by created a new salary basis with new element. But still I could not make it.
    Please let me know how to move forward? Thanks for your help.
    Thanks
    Ganesh kumar M

    Hi Ganesh,
    We have a similar post which have some recommendation. please go through the comments and check if it helps.
    https://forums.oracle.com/thread/2440864
    Thanks,
    Sanjay

  • How can I see a list of the assets associated with a sequence?

    How can I see a list of the assets, both online and offline, associated with a sequence?

    Exporting an EDL or copying and pasting a timeline into a bin gives a complete list of the clips in a sequence, but what I really would like is a list of the files used, without any duplications due to multiple clips from a single reel. Is there any quick way to automatically generate such a list?

  • How do I add another movie to the project area to work on without it being attached to a previous project?

    How do I add another movie to the project area to work on without it being attached to a previous project?

    No.  I have a number of items in the Event Library.  I am trying to move some of them to the Project Library and when I do it attaches itself to the other project I have there.

  • I had to replace my i4s with another one from the apple store.shouldn't i be able to go to the cloud to get all my contact info and other stuff that was stored in the cloud from the first phone?

    i had to replace my i4s phone with another one from the apple store. i need to download all my contact info and other stuff from the cloud to my new phone.i see a screen that says  RESTORE I PHONE   and are you sure you want to restore the iphone to its facory settings?  all of your media and other data will be erased. they i tunes will verify restore with apple. After this you will have the option to restore your contacts and other settins.  The question is will it restore my first phones info?  I am hesitant to delete anything  lol.

    No. If you made your backup to iCloud, iTunes will not restore from an iCloud backup. See:
    iOS: Backing Up and Restoring Data to a New Device

  • How to calculate with holding tax for the open item

    Dera all,
    Can you tel me how to simulate with holding tax for the open item? i will try do it using FI_WT_F110_CALCULATE FM  but it dosnt work. plz help me
    regard
    nawa

    Hi Sushil,
    can you please elaborate on how you resolved it. we are facing the same issue with BAPI not calculating the withholding tax data.
    Thanks,
    Sanket

  • How do you see another month on the calendar or can you only see the current month only

    how do you see another month on the calendar or can you only see the current month only

    You can't see another monthly calendar in the monthly calendar view, you can only see upcoming events for the next 7 days.

  • How to integrate with MS Axapta?

    Hi Everybody,
    can anyone tell me how to integrate with MS Axapta? Is there any Axapta adapters for Weblogic or someone else?
    Thank you in advance.

    Hi Everybody,
    can anyone tell me how to integrate with MS Axapta? Is there any Axapta adapters for Weblogic or someone else?
    Thank you in advance.

Maybe you are looking for

  • Analog VIDEO OUT on G5?

    I use a deck with Firewire in and S-video out with Final Cut. Can I get my G5 to send a signal the same way for DVD's, etc? Thanks so much!

  • Programmatic View Objects + View Links

    Ive constructed some programmatic view objects to grab data from 2 custom java business services (for example: Persons and Addresses). The reasons for them being custom and separate are out of my control. I need to easily represent a relationship bet

  • Show only specific columns

    hello, using obiee 11g I have a requirement like this I have 2 prompts, begin date and close date as prompts,Depending upon the date selected i want to show or hide the column. By default i made the prompts to show current date and current_date-365 A

  • No Content type in header error

    Hi getting the error "No content type in header" after i gave credentials in my home screen . But i can able to run generic application and while starting my jdev am  getting some firewall warning messages as "Windows firewall blocked some of the fea

  • Do backups become slower as the TC fills with data?

    I have about 80GB left on my 500GB TC.  backups are painfully slow, it seems my macbook is perpetually backing up, which seems to slow internet speeds which seems to make sense. so 1) if backups take longer as space on the TC becomes filled, can it r