How to know the execution time of rule in Calculation Manager

Hi All,
How do we come to know the time of execution of rule in calculation manager ?
Regards
Vikram

At this point there is no way to know the execution time of a rule in calculation Manager . If you are working on Planning rules, I believe planning displays the execution time in its job console.
-SR

Similar Messages

How to get the execution time of a Discoverer Report from qpp_stats table

Hello
by reading some threads on this forum I became aware of the information stored in eul5_qpp_stats table. I would like to know if I can use this table to determine the execution time of a worksheet. In particular it looks like the field qs_act_elap_time stores the actual elapsed time of each execution of specific worksheet: am I correct? If so, how is this value computed? What's the unit of measure? I assume it's seconds, but then I've seen that sometimes I get numbers with decimals.
For example I ran a worksheet and it took more than an hour to run, and the value I get in the qs_act_elap_time column is 2218.313.
Assuming the unit of measure was seconds than it would mean approx 37 mins. Is that the actual execution time of the query on the database? I guess the actual execution time on my Discoverer client was longer since some calculations were performed at the client level and not on the database.
I would really appreciate if you could shed some light on this topic.
Thanks and regards
Giovanni

Thanks a lot Rod for your prompt reply.
I agree with you about the accuracy of the data. Are you aware of any other way to track the execution times of Discoverer reports?
Thanks
Giovanni

How to know query execution time in sql plus

HI
I want to know the query execution time in sql plus along with statistics
I say set time on ;
set autotrace on ;
select * from view where usr_id='abcd';
if the result is 300 rows it scrolls till all the rows are retrieved and finally gives me execution time as 40 seconds or 1 minute.. (this is after all the records are scrolled )
but when i execute it in toad it gives 350 milli seconds..
i want to see the execution time in sql how to do this
database server 11g and client is 10g
regards
raj

what is the difference between .. the
statistics gathered in sql plus something like this and the one that i get from plan_table in toad?
how to format the execution plan I got in sqlplus in a proper understanding way?
statistics in sqlplus
tatistics
         0 recursive calls
         0 db block gets
       164 consistent gets
         0 physical reads
         0 redo size
     29805 bytes sent via SQL*Net to client
       838 bytes received via SQL*Net from client
        25 SQL*Net roundtrips to/from client
         1 sorts (memory)
         0 sorts (disk)
       352 rows processedexecution plan in sqlplus... how to format this
xecution Plan
0      SELECT STATEMENT Optimizer=ALL_ROWS (Cost=21 Card=1 Bytes=10
         03)
1    0   HASH (UNIQUE) (Cost=21 Card=1 Bytes=1003)
2    1     MERGE JOIN (CARTESIAN) (Cost=20 Card=1 Bytes=1003)
3    2       NESTED LOOPS
4    3         NESTED LOOPS (Cost=18 Card=1 Bytes=976)
5    4           NESTED LOOPS (Cost=17 Card=1 Bytes=797)
6    5             NESTED LOOPS (OUTER) (Cost=16 Card=1 Bytes=685)
7    6               NESTED LOOPS (OUTER) (Cost=15 Card=1 Bytes=556
8    7                 NESTED LOOPS (Cost=14 Card=1 Bytes=427)
9    8                   NESTED LOOPS (Cost=5 Card=1 Bytes=284)
10    9                     TABLE ACCESS (BY INDEX ROWID) OF 'USR_XR
         EF' (TABLE) (Cost=4 Card=1 Bytes=67)
11   10                       INDEX (RANGE SCAN) OF 'USR_XREF_PK' (I
         NDEX (UNIQUE)) (Cost=2 Card=1)
12    9                     TABLE ACCESS (BY INDEX ROWID) OF 'USR_DI
         M' (TABLE) (Cost=1 Card=1 Bytes=217)
13   12                       INDEX (UNIQUE SCAN) OF 'USR_DIM_PK' (I
         NDEX (UNIQUE)) (Cost=0 Card=1)
14    8                   TABLE ACCESS (BY INDEX ROWID) OF 'HDS_FCT'
          (TABLE) (Cost=9 Card=1 Bytes=143)
15   14                     INDEX (RANGE SCAN) OF 'HDS_FCT_IX2' (IND
         EX) (Cost=1 Card=338)
16    7                 TABLE ACCESS (BY INDEX ROWID) OF 'USR_MEDIA_
         COMM' (TABLE) (Cost=1 Card=1 Bytes=129)
17   16                   INDEX (UNIQUE SCAN) OF 'USR_MEDIA_COMM_PK'
          (INDEX (UNIQUE)) (Cost=0 Card=1)
18    6               TABLE ACCESS (BY INDEX ROWID) OF 'USR_MEDIA_CO
         MM' (TABLE) (Cost=1 Card=1 Bytes=129)
19   18                 INDEX (UNIQUE SCAN) OF 'USR_MEDIA_COMM_PK' (
         INDEX (UNIQUE)) (Cost=0 Card=1)
20    5             TABLE ACCESS (BY INDEX ROWID) OF 'PROD_DIM' (TAB
         LE) (Cost=1 Card=1 Bytes=112)
21   20               INDEX (UNIQUE SCAN) OF 'PROD_DIM_PK' (INDEX (U
         NIQUE)) (Cost=0 Card=1)
22    4           INDEX (UNIQUE SCAN) OF 'CUST_DIM_PK' (INDEX (UNIQU
         E)) (Cost=0 Card=1)
23    3         TABLE ACCESS (BY INDEX ROWID) OF 'CUST_DIM' (TABLE)
         (Cost=1 Card=1 Bytes=179)
24    2       BUFFER (SORT) (Cost=19 Card=22 Bytes=594)
25   24         INDEX (FAST FULL SCAN) OF 'PROD_DIM_AK1' (INDEX (UNI
         QUE)) (Cost=2 Card=22 Bytes=594)

How to find the execution time

Hi
I don't know whether it is possible in Oracle or not?
Say i have got around 20 odd Views in my DB and couple of them based on Materialized View which is again created by joining more than 5 based tables.
Even most of the Views are also created by joining base tables and MV's.
When i execute Select count(*) from <viewname>;
I do get the count of rows and on avg each view returns more that 30lacs row.
And when i excute select * from <View_name> by setting the Time on.
It takes more than 2 hours to return the rows.I know the elapsed time of a query do depend of external factors as well such as number of users using the DB Object used in thoe views,Number of process involved and all.
And therefore in order to gather the elapsed time of each and every view will take more than a week .
I would appreciate if anyone can provide me a better approach or even a shell script or something like that which will give me the elapsed time of all the views if i query (Select * from <view_name>);
Thanks in advance.
Vineet

But to SomeoneElse's point, if you are running
SELECT * FROM view_namefrom SQL*Plus, what you are primarily measuring is how fast your network is (because you're spending a great deal of time sending data from the database to the client) and the speed of the SQL*Plus client on your machine (which has to fetch that data, which may have to format and display that data, etc.) It is not a particularly meaningful metric. If you tuned the client machine so that SQL*Plus wasn't displaying the data, if you increased the fetch size, etc. you could drastically decrease the time it would take to send all the data to your client machine, but that is probably not going to constitute tuning for anyone other than you (i.e. you might see a halving of run time while everyone else saw no change).
Beyond that, doing a SELECT * with no criteria is likely to involve execution plans that no one else will see, data access patterns no one else will see, etc. which just makes the benchmark you are proposing irrelevent.
If you really, really want to measure how quickly your client can pull the data from all the views, you could of course let that run for a week. But the number wouldn't mean anything.
Justin

How to know the run time of a program..?

Hi Gurus,
How to know the exact run time of a program....?
Suppose i've a program....I've changed the code to improve the performance.
Now i want to compare run time of older and new one...How to do this...?
Pls help me ....
Thanks and Regards,
Nagarjuna

Hi,
go thru the below mentioned code............
data:   start TYPE i,
          end TYPE i,
          dif TYPE i.
GET RUN TIME FIELD start.
SELECT SINGLE bukrs belnr gjahr blart budat
FROM bkpf
INTO (cc, doc, fy, doc_ty, pst_dt)
WHERE bukrs = p_bukrs
AND belnr = p_belnr
AND gjahr = p_gjahr.
GET RUN TIME FIELD end.
dif = end - start.
WRITE: /001 'Time for select',
067 ':', dif, 'microseconds'.
Reward all helpful answers.
Thanks

How to find the Execution Time for Java Code?

* Hi everyone , i want to calculate the execution time for my process in java
* The following was the ouput for my coding,
O/P:-
This run took 0 Hours ;1.31 Minutes ;78.36 Seconds
*** In the above output , the output should come exactly what hours , minutes and seconds for my process,
but in my code the minutes are converted into seconds(It should not)...
* Here is my coding,
    static long start_time;
    public static void startTime()
        start_time = System.currentTimeMillis();
    public static void endTime()
        DecimalFormat df = new DecimalFormat("##.##");
        long end_time = System.currentTimeMillis();
        float t = end_time - start_time;
        float sec = t / 1000;
        float min = 0, hr = 0;
        if (sec > 60) {
            min = sec / 60;
        if (min > 60) {
            hr = min / 60;
        System.out.println("This run took " + df.format(hr) + " Hours ;"+ df.format(min) + " Minutes ;" + df.format(sec) + " Seconds");
    }* How to Calcualte exact timing for my process....
* Thanks

* Hi flounder, Is following code will wotk perfectly?
     public static void endTime()
          DecimalFormat df = new DecimalFormat("##.##");
          long end_time = System.currentTimeMillis();
          float t = end_time - start_time;
          float sec = t / 1000;
          float min = 0, hr = 0;
          while(sec >= 60){
     min++;
     sec = sec -60;
     if (min >= 60){
     min = 0; //or min = min -60;
     hr++;
          System.out.println("This run took " + df.format(hr) + " Hours ;"+ df.format(min) + " Minutes ;" + df.format(sec) + " Seconds");
     }

How to get the execution time of a query

Hi,
Environment: 10.2.0.4.0
Just wondering how I can get the query execution time? I am not interested in the query output nor do I want the statistics, just the execution time?
Any suggestions will be appreciated
Thanks in advance
rogers42

If you're using SQL*Plus
SQL> set autotrace traceonly
SQL> set timing on
SQL> <<your query here>>SQL*Plus will fetch all the data and then report the query plan, execution statistics, and elapsed time. It will not display the actual data.
SET TIMING ON alone tells SQL*Plus to display the execution time of each SQL statement-- the problem is that it also displays all the data which can skew the results because you're including the time required by SQL*Plus to pipe a bunch of data to the screen.
Justin

How to find the execution time of a query?

hi guys,
i need to find the execution time of a query.
i tried finding it in rsrt but couldn find the execution time.
pleasse let me know the way to do it..
regards
sagar

Hi sagar,
If you want to know the frontend time, first of all you need to maitain the BW Statistics. To maintain you have to go the respective target and click on it. Go to the tools, select BW Statistics of infoprovider. It pop ups a window there you find two check boxes 1) WHM and 2) Front end time. Check both.
Now Exe query and close the analyzer. Then go to SE11 table RSDDSTAT. There is one field which displays Frentend time.
OR
Go to STO3 here also you can analys the frontend time.
If you feel useful Assign Pts.
Regards,
Vishal

How to extend the execution time of an ABAP Program using the Process chain

Hello Sapians,
Our Environment has got 600seconds = 10 mintues as the execution time.
My ABAP Program is taking more than this 600 seconds, to show the result, I found this when I tried to execute in debug mode, it shows the result.
If I execute in background also it shows the results succesfully.
Only issue is when I execute this report in foreground it has been taking ages and goes on Time OUT Error.
It has been decided that we can extend the execution time only for this report, and it will reset the time back to 10mintues once the report has been executed successfully or failed in between for any other reasons.
And we can achieve this by using the process chains.
Can any body help me please in this regard
Thanks,

Hi,,,,,,,,,,
Besides Process Chain There is another way out for this........
Resetting time counter of dialog process so that time-out does not
happen. Use this fm within your program at appropriate locations to
reset time counter.
"CALL FUNCTION 'TH_REDISPATCH'."
Thanks
Saurabh

How to improve the execution time of my VI?

My vi does data processing for hundreds of files and takes more than 20 minutes to commplete. The setup is firstly i use the directory LIST function to list all the files in a dir. to a string array. Then I index this string array into a for loop, in which each file is opened one at a time inside the loop, and some other sub VIs are called to do data analysis. Is there a way to improve my execution time? Maybe loading all files into memory at once? It will be nice to be able to know which section of my vi takes the longest time too. Thanks for any help.

Bryan,
If "read from spreadsheet file" is the main time hog, consider dropping it! It is a high-level, very multipurpose VI and thus carries a lot of baggage around with it. (you can double-click it and look at the "guts" )
If the files come from a just executed "list files", you can assume the files all exist and you want to read them in one single swoop. All that extra detailed error checking for valid filenames is not needed and you never e.g. want it to popup a file dialog if a file goes missing, but simply skip it silently. If open generates an error, just skip to the next in line. Case closed.
I would do a streamlined low level "open->read->close" for each and do the "spreadsheet string to array" in your own code, optimized to the exact format of your files. For example, notice that "read from spreadheet file" converts everything to SGL, a waste of CPU if you later need to convert it to DBL for some signal processing anyway.
Anything involving formatted text is not very efficient. Consider a direct binary file format for your data files, it will read MUCH faster and take up less disk space.
LabVIEW Champion . Do more with less code and in less time .

What to do if data grows heavily.How to decrease the execution time

Procedure execution time increases from 1 minute to 40 minutes in the past three years. I think this is due to increase in size of tables. We are maintaining the database from last 6years. Nearly 25,000 records are adding per month in a table. Now each contains above 12Lakh records. I already used Query Optimization techniques. So please suggest me what to do.

So, does this process need to access the whole table or is it just interested in the last months records?
I already used Query Optimization techniques.meaning what precisely???
So please suggest me what to do.Without knowing a whole bunch more about your situation we cannot give you a solution. You have one slow process. So what? For instance, let's presume this is a batch process that runs once a month. Does a forty minute elapsed time matter compare to processes that are used by all your users many times every day? Are you prepared to risk the performance of those OLTP functions to improve the runtime of that batch process?
Cheers, APC

How to know the last time a table was used?

I was trying to find a log or something that can tell me when and who was the last one/s that used a table.
Could someone help me?
thanks

How can I activate the auditing? http://download-east.oracle.com/docs/cd/B19306_01/network.102/b14266/auditing.htm#i1011984
Daljit Singh

How to know the query execution time

Hi All,
I want to know the execution time taken for a particular query, How should i get that information ?
say for example,
select * from emp
after getting the result, i want to know the time taken for completing the execution.
How ?
Inputs are welcome !

BTW it was already written in a response to you yestreday:
Re: Query Plan
Gints Plivna
http://www.gplivna.eu

How to know the timings of the run time of thr report

Hi,
Can you please tell me how to know the run time of the query , i mean how much time it took for the query to dispaly the results .
Also we have these queries in the workbook. How to refresh the work book . is it enough if i refresh the query.
Thanks
Sruthi

Hi
How can we check in RSRT tcode?
And how can we do i RSRTRACE?
Can I know the procedure.

OSB: how to figure out the execution time of OSB proxy

Trying to figure out how to determine the execution time taken for any given OSB proxy. Seems like the OSB built-in alerting facilities can display the average response time of all calls to a proxy but not individually. Is there a way to dig this out from the monitoring data being collected?

Service monitoring which comes OOTB is supposed to be aggregated because in usual scenarios you dont need to see the processing time of a specific request. From a performance monitoring perspective the useful data usually is average processing time and minimum or maximum processing time for any request within the aggregation interval which is provided by OSB OOTB.
Now, in some cases the business might want to track each request individually. So, for example they can track how long did it take to process a specific order. OSB does not provide this feature OOTB. There are multiple ways to get this implemented. Two of the most common ways are:
1. Add a start and end time capturing in Proxy Services. You can use logging/reporting/publish to a DB etc to achieve this. But this is indeed intrusive and you will need to do this for every Proxy which needs to be monitored at every instance level. This is also a slight overhead in processing in itself.
2. Use monitoring products which can monitor the WS invocations externally. This will mean more investment but definitely a much better solution. You can consider using different products from Oracle and other vendors based on your requirements, features of products and costs. A few examples are OWSM, Oracle EM, CA Wily etc.

How to know the execution time of rule in Calculation Manager

Similar Messages

Maybe you are looking for