How to know whether my phone is unlocked or not

how to know whether my iphone is unlocked or not.

You don't know if you bought an unlocked iphone or not?
What did you ask for?
What does your reciept say?

Similar Messages

How do I know whether my phone is unlocked or not?

Hello
I am in Thailand trying to activate my iphone 4S with Thailand SIM card.
but the phone message says below.
This iPhone is not currently setup to work with carrier you're attempting to use. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked.
so my question is how do I know whether my phone is unlocked one or not, before I go and try get new SIM card.
Thank you very much. Your reply will be very much appreciated.

If your phone will not work with another sim card, then it is likely to be locked to the original carrier.
The only way to get your phone unlocked is to contact that phone company/carrier that the phone is locked to and hope that they offer unlocking. Apple cannot unlock a phone for you, only the phone company that your phone is locked to can do that. Some offer unlocking and some don't, so if the phone company does not offer unlocking, then you are out of luck and you'll either have to buy a new phone or use a sim card of the comapny - take out a contract with the compnay that the phone is locked to.
Anyway - contact Apple to see whether your phone is locked conclusively and if you talk to them they can tell you what they need.

How to know whether the phone is replaced or not?

Dear All,
Please help in how to know whether Iphone 5 is replaced or not? I came to know that on replacement, imei number gets changed. please make me aware.

Nobody here can make you aware. You need to contact Apple directly.

How to know whether the phone is unlocked?

Is there someplace in the software of my 3Gs that says whether or not the phone is unlocked? I don't want to get overseas and find out too late that I did it wrong. AT&T did their part. And I think I did my correctly. But how do I know I have achieved "unlockness"?

Did you restore through iTunes and receive the 'Congratulations, your iPhone is now unlocked!' message?
If so, your device is unlocked. If not, then it hasn't been unlocked

Who will tell me whether my phone is unlocked or not?

hi
who will tell me whether my phone is unlocked or not?

If your phone is out of contract, then I would take that to mean that when you purchased the phone you purchased it with a contract? If this is correct, then you will have to contact your phone company to request that they unlocked your phone for you. Nobody else can do this. If this is the case and you did have a contract, then it does mean that your phone is locked.

How to know whether the javascript is disabled or not while loading the jsp

Hi,
My query is like how to know whether the javascript is disabled or not while loading the Application main JSP in Mozilla browser.
I want some Java code or JavaScript code.

To the point, just let JS fire a specific HTTP request inside the same session.
This can be done in several ways. 1) Create a hidden <img> element and set the `src` attribute so that it will request a (fake) image from the server. The server just have to intercept on this specific request. 2) Fire an ajaxical request and let the server intercept on it. You can use a Filter for this which sets a token in the session scope to inform that the client has JS enabled.

How can i check whether my phone is unlocked or not

How can i check whether my phone is unlocked or not

rozhan.m wrote:
Im in srilanka, my sister brought me this phone from UK. i dont kwon how to call apple from here. pls help me
Nothing we can do to help you. If it was bought in the UK from an Apple store as unlocked, it is unlocked. If it was bought anywhere else, it will be locked, and only the carrier it is locked to will be able to unlock it.
If you've tried a local SIM and it has not worked, then you have your answer, it is locked.

How to know whether a file is opened or not ?

Hi all,
How to know whether a file is opened by its editor or not ? File may be any of the type.

There are platform-dependent commands that tell whether a file (or directory, port etc.) is used by which processes.
[oracle@izsak ~]$ fuser .
.:                    9299c
[oracle@izsak ~]$ ps -p 9299 -f
UID        PID PPID C STIME TTY          TIME CMD
oracle    9299 9298 0 Apr25 pts/0    00:00:00 -bash
[oracle@izsak ~]$ ls -l $fn
-rw-r----- 1 oracle oinstall 111215876 Apr 25 19:05 /opt/oracle/product/AS/10g/R2/opmn/logs/OC4J~ebank~default_island~1
[oracle@izsak ~]$ fuser $fn
/opt/oracle/product/AS/10g/R2/opmn/logs/OC4J~ebank~default_island~1: 3746 3747 3748 3749 3750 3751 3752 3753 3754 3755 3756 3758 3761 3762 3765 3767 3769 3770 3771 18638 21605 21743 21744 21745 22140 22143
[oracle@izsak ~]$ ps -p 3746 -f
UID        PID PPID C STIME TTY          TIME CMD
oracle    3746 26427 0 Apr23 ?        00:00:01 /opt/oracle/product/AS/10g/R2/jdk/bin/java -server -Djava.security.policy=/opt...

How to know whether file is document file or not and page count

How can i know whether the file is document file
Eg: File file = new File("test.text");
        File file = new File("test.doc");
        File file = new File("test.pdf");   etc should return true
File file = new File("test.exe");
       File file = new File("test.dat"); etc should return false
and if it is true i should get the page count for example if pdf or doc file is containinf 100 pages
i should get the value 100 is there any way to acheive this in java pls give some idea or example code
Regards

To get the number of pages you would need to write or find an existing Java API that can parse the proprietary formats of each type. And some formats do not really have pages. For instance, the number of pages of a .txt (often opened by Notepad by default) file would depend on your page length which is not generally stored in the file it is set by the tool you use to read the file.

How to know whether the file is opened or not

Hi All,
In the file handling,
Before writing OPEN DATA SET, I want to know the file is already opened or not.
Please help me out in this regard.
Thanks and regards,
Mallareddy

Hi,
Please try GET DATASET statement.
Syntax:
GET DATASET dsn.
Extras:
1. ... POSITION pos
2. ... ATTRIBUTES attr
In some cases, the syntax rules that apply to Unicode programs are different than those for non-Unicode programs. For details, see File Interface.
Effect
Used to get the properties of a file already open.
You can use this statement without additions to determine whether the file is open.
If the file is not open, an exception of the type CX_SY_FILE_OPEN_MODE is triggered.
Regards,
Ferry Lianto

How to know whether tomcat server is up or not..?

I have developed a java webstart application.In that,I need to include a component in a frame that shows whether the appplication is connected to the server(tomcat) or not.If it is connected to server,then a green light is up,if not red light is up.It should show the connection status althrough the application.I browsed through the apache documentation of Catalina class, http://tomcat.apache.org/tomcat-4.1-oc/catalina/docs/api/org/apache/catalina/startup/Catalina.html ,thinking that it could help me out.But I couldn't find it useful.So,I need a way to know whether the application is connected to server or not.Is there anyway to do it?Thanks in advance..!

hell2heaven wrote:
Yes I need both first and second case,there exists some server listening on a particular port and he can send some request and get some response from it.Well, the second implies the first, so unless you're interested in "The port is active, but the server isn't running properly," testing the second is sufficient--the first won't provide any additional information.
Here my server is apache tomcat and it is running on port 8085.Actually,what happens in the application is when user inputs data via text field,a connection is opened to the appropriate servlet and object is passed to the servlet through that established connection.then servlet returns another object reporting the result,what happened on the server side.I want user to feel sure that he can send data to the servlet running on tomcat successfully.Am I clear enough now..?
Not really.
And if you're saying, "I want to see if the server is running before the user sends a request," that's pointless. Just send the request. If it succeeds, the server is running. If it fails, the server is not running or is unreachable or had some error. If you test first and it comes back good, the server can still go down between your test and the "real" request.

How to check if my phone is unlocked or not?

my old phone was cracked and Apple replaced with a new iphone 4 for 170 dollers. but my sim card that i use in a different country does not work? why?

If your original phone was purchased as unlocked directly from Apple, or was properly unlocked by the original cellular provider, the replacement should also be unlocked. Any other methods of unlocking will not guarantee an unlocked replacement.

How to know whether Caps Lock Is On or Not

Hi
My application is in Foms 6i and oracle 9i. In logon screen , i want show toltip
if caps lock is on stating that 'Caps lock is on.'. It should occur at the start of the logon form without entering any data( or after filling Userid an also do)
How do I implement this.
Regards,
Subhash

Also see
Find whether the caps lock is on or off

How to know whether all Idocs sent perfectly or not to target System

Hi All,
We are sending the Material Master Idocs via XI and to WMS File system ( Idoc-XIFile)
How can a business user confirm that all the sent Idocs are reached to WMS by End of the day.
Is there any way to match or any report kind of thing for this please
Regards
Vamsi

HI vamsi,
Following is the solution that we are using >
1. There is a separate interface ( file to idoc )that runs at the end of the business day..
This interface will pick up a file ( from say ur WMS system) and post an idoc STATUS.SYSTAT01
the file in this case will have the idoc number of the material idoc and the status( say 11 for OK ) and the same will be mapped to idoc.
This idoc in turn will change the status of the material idoc from 03 to 11 . Then a filter can be made on this to find out which idocs did not reach status 11..
however here there are chances that this ack interface can go in error as well
2. Or u can have a separate interface ( file to Proxy ) ..here the difference would be that single file will have all the idoc numbers that were received during that day and then in the proxy u can write abap code to change the status of those idocs to say status OK
Edited by: Tarang Shah on Feb 6, 2010 8:05 PM
Edited by: Tarang Shah on Feb 6, 2010 8:06 PM
Edited by: Tarang Shah on Feb 6, 2010 8:14 PM

How to know whether my IPHONE 3G S is factory unlocked ?

Hi,
I have recently bought iphone 3G S but i dont know whether it is factory unlocked or not. Is there any other way i can confirm whether my iphone is factory unlocked or not ? Please help
Thanks
imran

There is no such thing as a "factory unlocked iphone". Whether an iphone is available as unlocked or not is determined by the carriers that Apple has contracts with or if required by law where the iphone is sold. The unlock is, however, through the carriers, not Apple. Most of the time when someone posts as you do, they have a hacked phone, not an officially unlocked phone. If you restore or update your software, through itunes, the phone will be locked to the carrier it was originally locked to if not officially unlocked.

How to know whether my phone is unlocked or not

Similar Messages

Maybe you are looking for