How to limit the selection of Ship To Party

I have a Biz Case:
"A" user have 2 Ship to party "B" and "C" in the customer master data, when I create a OR order, I found I can use "D" user as the ship to party(of course, A is sold to party).
So I want to impl this function:
if sold to party is A user in a sales order, ship to party can only be B or C, how to config it?
thanks...........

Hi Zhang,
You are correct. You can enter ship-to D even though it is not maintained. As described in OSS note 380507 the
system will accept every ship-to party which you select manually. The ship-to party doesn't have to be associated
with the sold-to party in the customer master data. It is only required that the selected ship-to party is maintained in the
same sales area.
To get the system to work differently a modification is needed.
Some tips for a modification:
- table TPACHECK (which checks should be performed)
- function modules SD_PARTNER_SINGLE_MODIFY
-> SD_PARTNER_CHECK_BEFORE (error messages)
-> SD_PARTNER_CHECK_AFTER (info and warning messages)
Or another option you may consider userexit in MV45AFZZ (maybe
userexit_save_document or userexit_save_document_prepare).
Hope this helps.
Best regards,
Ian

Similar Messages

How to get the option of 'Ship to Party' in PF of VA15 Inquiries lists

Hi,
I want to include the option of SH partner function in VA15, Inquiries list when I click the Partner functions push button. Can any one suggest the possibility?
Now we can only see the SP (Sold to Party) and ER (Employee responsible)

Dear Suresh,
This is a standard SAP Function. You cannot bring Ship-to-party to this screen. If you want a report based on Ship-to-party, then it should be a customised one.
Hope this helps.
Thanks and regards.
Augustine Ponraj

How to limit the number of items in a KPI Status list web part?

How to limit the number of items in a KPI Status list web part? There is no paging option for Business Category Status list or any limit can be made by changing the Item limit in default view unlike other SharePoint List web parts. So How to achieve it?
Kindly help.
Regards,
ZA
zzzSharePoint

Hi,
According your post, I know you would like to set the item display limit in Status List web part.
In the web part, the number of items to display is based on the view which you selected when configuring the web part. The default view for status list is status list view.
However, I am not able to limit the items’ display number of the status list view. After changing the items limit, the list item displayed would not match the number specified by Item Limit. Thus, it is not possible to limit the number
of items in the Status list web part.
It could be a potential issue in SharePoint 2010.
We will log this issue to our suggestion box. As after the submission, we may not have any time guarantee when the fix may be released, but it may come out on next cumulative update.
Appreciate your time and efforts.
Thanks.
Tracy Cai
TechNet Community Support

How to limit the number of boxes to tick in LC

I would like to know the "javascript" in Lice Cycle to limit the number of boxes ticked
for example i have 20 boxes and i would like that the client can only tick 5 boxes
thank you

Thank you Steeve
But my problem is that i don't know which boxes the client will want to tick so all boxes have to be available at the beginning.
When the client will have ticked 5 boxes in this case and only in this case, all others boxes must become unavailable so it is very difficult to set up
if you have any idea
thanks anyway
Date: Fri, 15 May 2009 09:44:33 -0600
From: [email protected]
To: [email protected]
Subject: How to limit the number of boxes to tick in LC
This is a form validation issue. For example, you may have a text field and the value entered into that field determines which checkboxes must be completed to satisfy a validation or business rule. The attached sample requests the value "foobar" to be entered into a text field. If you enter "foobar" and exit the field, 2 of 3 checkboxes have the access property changed to "protected", meaning a user cannot no longer select those checkboxes.
// form1.page1.subform1.input::exit - (JavaScript, client)
if (this.rawValue == "foobar") {
form1.page1.subform1.cb2.access = "protected";
form1.page1.subform1.cb3.access = "protected";
Steve
>

In BI how to filter the selection options based on inputs on top field

Hi Friends,
In BI, How to filter the selection options based on inputs on top field.
The system should automatically filter the lower level drop downs based on the selection of a higher level.
For e.g. :
If a user selects a Country then the States drop down should only display the State's belongs to the Country. Similarly when a State is selected, the District drop down should display only those District's belongs to the State.
Thanks in Advance.
Regards
Jayaram M

Hi Anil,
Thanks for reply but I couldn't use Compounding Characteristic here. Need some other solution.
Regards
Jayaram M

How to get the selected values from the shuttle

Hi
Please tell me how to get the selected option values from the shuttle leading list.
Thanks

you can also obtain the option values present in the leading and trailing lists using the
following methods:
public String[] getLeadingListOptionValues(OAPageContext pageContext, OAWebBean
webBean)
public String[] getTrailingListOptionValues(OAPageContext pageContext, OAWebBean
webBean)For example, the following code sample returns an array of values in the trailing list, ordered according to the
order in which they appear in the list:
String[] trailingItems =
shuttle.getTrailingListOptionValues(pageContext, shuttle);Thanks
--Anil

How to Retrieve the Selected Values from selectOrderShuttle using ADF 11g

Hi Every One,
Does anyone has idea how to retrieve the selected Items using shuttle and Order of the items using 'SelectOrderShuttle' component ?
Thanks

shuttle's valuechangeevent would fire when you shuttle items back and forth.
    public void selectOrderShuttle1_valueChangeListener(ValueChangeEvent valueChangeEvent) {
        ArrayList list = new ArrayList(Arrays.asList(valueChangeEvent.getNewValue()));
        if (list != null){
            for (int i=0; i<list.size(); i++) {
                int l = list.size()-1;
                val = list.get(l).toString(); //returns , delimited string
                if (val != null){
                    val = val.replaceAll("[\\[\\]]", "");
                    StringTokenizer st = new StringTokenizer (val, ",");
                    int nto = st.countTokens ();
                    for (int j = 0; j < nto; j++)
                        String token = st.nextToken ();
            ..........

How to limit the max dialog no that one user can use at the same time?

Hi,
I meet one performance problem that one user can open 6 sessions in the GUI and he/she can run 6 reports at the same time witch could occupy 6 dialogs in the sap R/3 instance. It makes poor performance for other users.
Would you pls tell me how to limit the no. of sessions one user can create at the same time or how to limit the no. of dialogs one user can occupy at the same time?
Thanks a lot!
I used this parameters in the default profile as blew:
rdisp/rfc_check 1
rdisp/rfc_use_quotas 1
rdisp/rfc_max_own_used_wp 20 (means: 20%)
It still didn't work.
Sean

Hello,
We can reserve DIA W.P by giving value to the parameter :- rdisp/rfc_min_wait_dia_wp=1(default)
that have to necessarily remain free for other users.
This parameter is used to reserve a number of dialog work processes for Dailog mode.
For eg. If 10 dialog w.p. are configured for the instance(rdsip/wp_no_dia=10) and the parameter rdisp/rfc_min_wait_dia_wp=3 is set,parallel RFC's can occupy a maximum of 7 DIA W.P.3 DAI W.P. always remain free for dialog mode.
But now the question is how we assign/restrict this free dialog w.p. to the specific user.
Reply...
Regards,
JUNAID

How to use the select option to get the multiple bom explosion

hi friends,
          i have completed the bom exp using parameters to get one material
input,but i need to adopt select option to give from and to materials
i ll gives from and to materials with description and bom deails
i here gave the coding also, pl give me a suggestion how to adpot the select
optoins instead of parameters ,very urgent
REPORT PP_BOM_EXPLOSION.
tables :mara,marc,stpo.
TYPE-POOLS : SLIS.
*parameters: p_werks like t001w-werks obligatory.
SELECT-OPTIONS : p_matnr FOR mara-matnr obligatory.
**select-options : p_matnr for mara-matnr obligatory.
PARAMETERS : P_WERKS LIKE T001W-WERKS OBLIGATORY,
        P_MATNR LIKE MARA-MATNR OBLIGATORY.
*parameters: p_werks like marc-werks obligatory,
*p_matnr like marc-matnr obligatory.
constants c_x value 'X'.
data: begin of it_comp occurs 0,
matnr like mara-matnr,
maktl like makt-maktx,
idnrk like stpox-idnrk,
ojtxp like stpox-ojtxp,
menge like stpox-menge,
meins like stpox-meins,
matkl like stpox-matmk,
end of it_comp.
data : topmat like cstmat.
data: w_topmat like cstmat.
DATA : IT_MARA LIKE MARA OCCURS 0 WITH HEADER LINE.
DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA : WA_FIELDCAT_LN LIKE LINE OF IT_FIELDCAT.
DATA : IT_EVENTCAT TYPE SLIS_T_EVENT.
DATA : WA_EVENTCAT_LN LIKE LINE OF IT_EVENTCAT.
DATA : IT_LAYOUT TYPE SLIS_LAYOUT_ALV.
DATA: S_COL_POS TYPE I.
start-of-selection.
perform explode_assembly.
PERFORM BUILD_FIELDCATALOG.
PERFORM DATA_DISPLAY.
*end-of-selection.
*perform write_report.
*top-of-page.
*perform print_header.
*form print_header.
*write: /(18) 'Component'(h00),
*(40) 'Description'(h01),
*'Mat.Group'(h02),
*(18) 'Quantity'(h03).
*uline.
*endform.
*form write_report.
*write: / w_topmat-matnr under text-h00 color col_heading,
*w_topmat-maktx under text-h01 color col_heading.
*loop at it_comp.
*write: /
*it_comp-idnrk under text-h00,
*it_comp-ojtxp under text-h01,
*it_comp-matkl under text-h02,
*it_comp-menge unit it_comp-meins under text-h03,
*it_comp-meins.
*endloop.
*uline.
*endform.
form explode_assembly.
data: it_stb like stpox occurs 0 with header line,
it_stb2 like stpox occurs 0 with header line,
it_stb3 like stpox occurs 0 with header line,
w_msg(255) type c.
SELECT MATNR FROM MARA INTO CORRESPONDING FIELDS OF TABLE IT_MARA
                           WHERE MATNR IN P_MATNR.
Explode highest level:
*LOOP AT IT_MARA.
call function 'CS_BOM_EXPL_MAT_V2'
exporting
auskz = c_x
capid = 'PP01'
cuols = c_x
datuv = sy-datum
knfba = c_x
ksbvo = c_x
mbwls = c_x
mdmps = c_x
BGIXO = c_x
MKMAT = c_x
MMAPS = c_x
FBSTP = c_x
FTREL = c_x
mtnrv = P_MATNR
werks = p_werks
importing
topmat = w_topmat
tables
stb = it_stb
exceptions
alt_not_found = 1
call_invalid = 2
material_not_found = 3
missing_authorization = 4
no_bom_found = 5
no_plant_data = 6
no_suitable_bom_found = 7
conversion_error = 8
others = 9.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
into w_msg.
*write: / w_msg.
exit.
endif.
Don't process documents
delete it_stb where idnrk is initial.
Don't process valid from furure:
delete it_stb where datuv >= sy-datum.
Explode phantom assemblies up to last level
*do.
it_stb2[] = it_stb[].
*delete it_stb2 where dumps is initial.
*if it_stb2[] is initial.
*exit.
*endif.
*delete it_stb where not dumps is initial.
delete it_stb where VPRSV <> 'S' OR MMSTA = '61'.
loop at it_stb2.
call function 'CS_BOM_EXPL_MAT_V2'
exporting
capid = 'PP01'
auskz = c_x
cuols = c_x
datuv = sy-datum
knfba = c_x
ksbvo = c_x
mbwls = c_x
mdmps = c_x
FBSTP = c_x
FTREL = c_x
mtnrv = it_stb2-idnrk
werks = p_werks
tables
stb = it_stb3
exceptions
alt_not_found = 1
call_invalid = 2
material_not_found = 3
missing_authorization = 4
no_bom_found = 5
no_plant_data = 6
no_suitable_bom_found = 7
conversion_error = 8
others = 9.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
into w_msg.
*write: / w_msg.
else.
delete it_stb3 where idnrk is initial.
delete it_Stb3 where sobsl = 50.
loop at it_stb3 .
multiply it_stb3-menge by it_stb2-menge.
modify it_stb3 transporting menge.
endloop.
append lines of it_stb3 to it_stb.
endif.
*ENDLOOP.
endloop.
*enddo.
Build table of components collecting the same components from
all levels
loop at it_stb.
it_comp-matkl = it_stb-matmk.
it_comp-idnrk = it_stb-idnrk.
it_comp-ojtxp = it_stb-ojtxp.
it_comp-menge = it_stb-menge.
CALL FUNCTION 'CONVERSION_EXIT_CUNIT_OUTPUT'
    EXPORTING
    INPUT                = IT_STB-MEINS
    LANGUAGE             = SY-LANGU
    IMPORTING
LONG_TEXT            =
   OUTPUT               = IT_STB-MEINS
SHORT_TEXT           =
EXCEPTIONS
   UNIT_NOT_FOUND       = 1
   OTHERS               = 2
    IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
it_comp-meins = it_stb-meins.
collect it_comp.
clear it_comp.
endloop.
*READ TABLE IT_COMP INDEX 1.
*IF SY-SUBRC = 0.
IT_COMP-MATNR = w_topmat-matnr.
IT_COMP-MAKTL = w_topmat-maktx.
INSERT IT_COMP index 1.
*ENDIF.
ENDFORM.
FORM TO APPEND DATA INTO ALV FORM
FORM BUILD_FIELDCATALOG.
PERFORM BUILD_FIELDCAT USING 'MATKL' 'Component'.
PERFORM BUILD_FIELDCAT USING 'MATKL' 'Component'.
*loop at it_comp.
   PERFORM BUILD_FIELDCAT USING 'MATNR' 'Material'.
PERFORM BUILD_FIELDCAT USING 'MAKTL' 'Material Description'.
PERFORM BUILD_FIELDCAT USING 'IDNRK' 'Component'.
PERFORM BUILD_FIELDCAT USING 'OJTXP' 'Description'.
PERFORM BUILD_FIELDCAT USING 'MATKL' 'Material Group'.
PERFORM BUILD_FIELDCAT USING 'MENGE' 'Quantity'.
PERFORM BUILD_FIELDCAT USING 'MEINS' 'Unit Of MEASUREMENT'.
*endloop.
ENDFORM.
FORM TO BUILD IN FIELD CATALOG FOR ALV FORM
FORM BUILD_FIELDCAT USING L_FIELDNAME LIKE DD03L-FIELDNAME S_TEXT LIKE DD03P-SCRTEXT_M.
CLEAR WA_FIELDCAT_LN.
ADD 1 TO S_COL_POS.
WA_FIELDCAT_LN-REF_TABNAME = 'IT_COMP'.
WA_FIELDCAT_LN-FIELDNAME    = L_FIELDNAME.
WA_FIELDCAT_LN-SELTEXT_M    = S_TEXT.
WA_FIELDCAT_LN-COL_POS      = S_COL_POS.
WA_FIELDCAT_LN-QFIELDNAME   = SPACE.
WA_FIELDCAT_LN-HOTSPOT      = SPACE.
WA_FIELDCAT_LN-JUST         = 'R'.
APPEND WA_FIELDCAT_LN TO IT_FIELDCAT.
ENDFORM.
FORM TO BUILD IN FIELD CATALOG FOR ALV FORM
FORM DATA_DISPLAY.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
I_BACKGROUND_ID                   = ' '
   I_GRID_TITLE                      = TEXT-001
I_GRID_SETTINGS                   =
IS_LAYOUT                         =
   IT_FIELDCAT                       = IT_FIELDCAT
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
TABLES
    T_OUTTAB                          = IT_COMP
   EXCEPTIONS
   PROGRAM_ERROR                     = 1
   OTHERS                            = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.
Thanks in advance
                                                                                Regards
senthilkumar D

tables :mara,marc,stpo.
parameters: p_werks like t001w-werks obligatory.
*p_matnr like mara-matnr obligatory.
*select-options : p_matnr for mara-matnr obligatory.
select-options : P_matnr for mara-matnr.
*parameters: p_werks like marc-werks obligatory,
*p_matnr like marc-matnr obligatory.
constants c_x value 'X'.
data: begin of it_comp occurs 0,
idnrk like stpox-idnrk,
ojtxp like stpox-ojtxp,
menge like stpox-menge,
meins like stpox-meins,
matkl like stpox-matmk,
end of it_comp.
data: w_topmat like cstmat.
data : begin of itab occurs 0,
        matnr like mara-matnr,
        end of itab.
*data : itab type table of mara with header line.
start-of-selection.
perform explode_assembly.
end-of-selection.
perform write_report.
top-of-page.
perform print_header.
form print_header.
write: /(18) 'Component'(h00),
(40) 'Description'(h01),
'Mat.Group'(h02),
(18) 'Quantity'(h03).
uline.
endform.
form write_report.
write: / w_topmat-matnr under text-h00 color col_heading,
w_topmat-maktx under text-h01 color col_heading.
loop at it_comp.
write: /
it_comp-idnrk under text-h00,
it_comp-ojtxp under text-h01,
it_comp-matkl under text-h02,
it_comp-menge unit it_comp-meins under text-h03,
it_comp-meins.
endloop.
uline.
endform.
form explode_assembly.
data: it_stb like stpox occurs 0 with header line,
it_stb2 like stpox occurs 0 with header line,
it_stb3 like stpox occurs 0 with header line,
w_msg(255) type c.
select matnr from mara into table itab where matnr between p_matnr-low and p_matnr-high.
loop at p_matnr.
itab-matnr = p_matnr-low.
   append itab.
   itab-matnr = p_matnr-high.
   append itab.
   clear itab.
   endloop.
Explode highest level:
loop at itab.
call function 'CS_BOM_EXPL_MAT_V2'
exporting
auskz = c_x
capid = 'PP01'
cuols = c_x
datuv = sy-datum
knfba = c_x
ksbvo = c_x
mbwls = c_x
mdmps = c_x
BGIXO = c_x
MKMAT = c_x
MMAPS = c_x
FBSTP = c_x
FTREL = c_x
mtnrv = itab-matnr
werks = p_werks
importing
topmat = w_topmat
tables
stb = it_stb
exceptions
alt_not_found = 1
call_invalid = 2
material_not_found = 3
missing_authorization = 4
no_bom_found = 5
no_plant_data = 6
no_suitable_bom_found = 7
conversion_error = 8
others = 9.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
into w_msg.
write: / w_msg.
exit.
*else.
endif.
loop at it_stb.
it_comp-matkl = it_stb-matmk.
it_comp-idnrk = it_stb-idnrk.
it_comp-ojtxp = it_stb-ojtxp.
it_comp-menge = it_stb-menge.
it_comp-meins = it_stb-meins.
collect it_comp.
clear it_comp.
endloop.
endloop.
endform.
i got the low and high from selectoption and then move it into itab.
then i pass itab-matnr into fm. using loop.
but i got only one output
but ineet to got from and to output.
give me a solution
Regards
ds

How to limit the number of items that a list control can hold?

Hi,
I am using a Flex3 List control for one of my projects.
I add drag & drop functionality to it, so that i can drag & drop elements from one control to another.
How to limit the number of items that a list control can hold / can be dropped in a list control ?
- Sen.

1. Listen for the dragdrop event on the control you are dragging onto.
2. check the length of the items in the dataprovider - if it exceeds your maximum override the default drop action with e.preventDefault(); (assuming you used e for the event on the handler).
Regards,
Mark.

How to delete the selected rows in a JTable on pressing a button?

How to delete the selected rows in a JTable on pressing a button?

You are right. I did the same.
Following is the code where some of them might find it useful in future.
jTable1.selectAll();
int[] array = jTable1.getSelectedRows();
for(int i=array.length-1;i>=0;i--)
DefaultTableModel model = (DefaultTableModel)jTable1.getModel();
model.removeRow(i);
}

How to get the selected rows & columns in the table?

hi everybody,
In my application the table is kept inside the event structure.I select the cells in the table (using mouse) on running time.How to get the selected number of rows & columns in that table?

Hello,
You can fill selected values of the table by writing to it or the corresponding property using a property node - the table is just a 2D array of strings. I think for your "disable" question you are referring to the shortcut menu (when you right click). If you are using LabVIEW 8.x, you can edit or disable that shortcut menu - just right click on your table at edit time and choose Advanced >> Run-Time Shortcut Menu.
Best Regards,
JLS
Best,
JLS
Sixclear

How to limit the number of rows in a smart form , sap script.

Can anyone tell me how to limit the number of rows in the output of a sap script/smart form. I have tried "protect/endprotect" in sap script but have no idea of how to do in smart form. In sap script the only way it has happened is by reducing the size of the main window.

Hi,
In Smartform also, why dont you try reducing the size of the window if you want to limit the rows in it. Also if you are printing Line Items in a LOOP, you can write
LOOP AT T_ITAB FROM 1 TO N in the LOOP Node if you know how many records exactly you want to display in 1 Page processing.
regards,
Mahesh

How to use the selection profile and status profile for production order?

Hi expert,
I want to know how to use the selection profile and status profile for production order. what's the usage for these two selection profile and status profile ?
Please help me.
thanks in advance.
george.shi

Hi George,
There are are two types of statuses.One is system status and second one is user status.These statuses will tell us current situation of an order.
We can't change system statuses.But we can create our own statuses through status profile.With this profile we can control user statuses.
In this status profile,
1.We define the sequence in which user statuses can be activated,
2.We define initial statuses
3. Allow or prohibit certain business transactions.
Selection profiles are used to select the objects (say production orders) with different status combinations.We assign status profiles to selection profiles in BS42 T-Code.
Regards,
Raja.
Edited by: Rajarao on Oct 30, 2008 6:21 AM
Edited by: Rajarao on Oct 30, 2008 6:22 AM

How to read the selected value of a dropdown list box

Hello,
I have 2 custom fields which are of type dropdown list on Accounts(CRMM_ACCOUNT) PCUI application details tab.I need to read the selected value of first dropdown list item,based on that second dropdown list will be populated.
I know where to populate the dropdown list box,it is in FILL_DROPDOWN_LISTBOX.
I dont know how to trap the selection made on dropdown list.
PLease guide me on how to trap the dropdown list field selection value.
Thanks in advance.
Thirumala.

Hello,
Check what is done in standard for the fielf REGION which is inked to the country.
Otherwise, you can do the following :
- in field group customizing, for field 1, flag the 'send request' flag. So, when you change the value in this field via the dropdown, the MAC methods are immediately called.
- Put the new value in a global variable (GV).
- in the fill_dropdown_listbox method, get the value from this GV and based on it, filter the values for the dropdown of field 2.
Hope this will help you,
Regards,
Frederic

How to limit the selection of Ship To Party

Similar Messages

Maybe you are looking for