How to list a material in a plant for the specified delivery date

Hi experts,
I am quite new in the area .I have now a problem with PO.
At the item level of my PO, the plant will not be extracted automatically. Is this normal?
And after I entered the plant manually and the error message shows up:
""the material xx not listed in plant".
To be more specific, "Material xxx is not listed in plant xxx for the specified delivery date".
I have checked the material master data and found this material has been extended for this plant.
How can I fix this problem?
Best regards,
Fan
Edited by: Fan Mou on Aug 27, 2009 3:18 PM

Hi,
At the item level of my PO, the plant will not be extracted automatically. Is this normal?
Yes this is normal, however you can set a plant to be proposed by the system. To do this in the purchase order, click the button Personal setting, which you can find at the top right hand side. The system will open a personal settings window. In the default values tab, under PO item tab, you can enter the default plant value and other data. Save the data. Then whenever you create a new purchase order, the system will populate these default values.
""the material xx not listed in plant"
Check whether the material master -purchasing view has been activated or not.
Regards,

Similar Messages

How to maintain alternative material in a BOM for a component.

how to maintain alternative material in a BOM for a component.if stock for existing bom component is less then it should consider other alternative material in the same BOM

HI,
You can maintain alternate material for BOM Component by specifying Alternate Item group as below;
Go to CS03/CS02--> Items-> Select Component and go to details->Basic Data Tab--> General Data
Pls. find more details about Alternate Item group maintainance as below:
Alternative item: group
Consolidation of alternative items within a BOM. Every material in the assembly can be included in the alternative item group.
Use
As soon as you enter an alternative item group, you see an additional dialog box with the following data: ranking order, strategy, usage probability.
You can maintain alternative items in the following situations:
Alternative positions with specific usage probability
These alternative items are incorporated with a specific usage probability. Enter the usage probability for each alternative item in the group, so that:
dependent requirements are determined in requirements planning
dependent requirements are changed to a reservation in the production order
Alternative positions as information
You can enter an alternative item for information purposes. This item would then, for example, only be taken into account in situations involving missing parts.
As there should be neither dependent requirements nor a reservation for this item, enter no usage probability.
Procedure
Enter the same character string to denote the alternative items of an alternative item group.
Enter the same strategy for all alternative items in the alternative item group.
Dependencies
Alternative items are valuated in the following way:
Dependent requirements determination
Requirements planning determines the dependent requirements according to the usage probabilities that have been entered.
If the usage probability is 0%, then no procurement is planned for the item. For information purposes, however, dependent requirements with 0 as quantity are created.
Withdrawal posting
You can control the withdrawal posting for the resevation in the production order in the following way:
Withdrawal according to usage probability (manual change is possible)
Withdrawal if there is 100% availability
(Check ranking order and strategy)
Example: See Strategy for alternative position
Further you can also maintain alternate material if you want to stop using this material at certain time as below:
In material master of the material ,
Go to MRP-4 View----> Under Discongtinued parts specify
Discontinuation Indicator
Eff-out.
Follow-up matl
So system will automatically consider follow up material in BOM as per the settings you have maintained for the material to be replaced.
Hope this helps.
Regards,
Tejas

How to find the list of USER-EXITS or BADI for the transaction ABSO

Hi all,
Please help me to find the list of USER-EXITS or BADI for the transaction ABSO & find the exact user-exit which meets the requirement.
Thanks & Regards,
gyanaraj

Hi,
Copy the problem in SE38 and Execute it
Enter the Tcode u want
this will the list of Userexits and badis
TABLES: TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA: JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA: FIELD1(30).
DATA: V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS: P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA: WA_TADIR TYPE TADIR.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.

Unable to get the SharePoint 2013 List names using Client object model for the input URL

Please can you help with this issue.
We are not able to get the SharePoint 2013 List names using Client object model for the input URL.
What we need is to use default credentials to authenticate user to get only those list which he has access to.
clientContext.Credentials = Net.CredentialCache.DefaultCredentials
But in this case we are getting error saying ‘The remote server returned an error: (401) Unauthorized.’
Instead of passing Default Credentials, if we pass the User credentials using:
clientContext.Credentials = New Net.NetworkCredential("Administrator", "password", "contoso")
It authenticates the user and works fine. Since we are developing a web part, it would not be possible to pass the user credentials. Also, the sample source code works perfectly fine on the SharePoint 2010 environment. We need to get the same functionality
working for SharePoint 2013.
We are also facing the same issue while authenticating PSI(Project Server Interface) Web services for Project Server 2013.
Can you please let us know how we can overcome the above issue? Please let us know if you need any further information from our end on the same.
Sample code is here: http://www.projectsolution.com/Data/Support/MS/SharePointTestApplication.zip
Regards, PJ Mistry (Email: [email protected] | Web: http://www.projectsolution.co.uk | Blog: EPMGuy.com)

Hi Mistry,
I sure that CSOM will authenticate without passing the
"clientContext.Credentials = Net.CredentialCache.DefaultCredentials" by default. It will take the current login user credentials by default. For more details about the CSOM operations refer the below link.
http://msdn.microsoft.com/en-us/library/office/fp179912.aspx
-- Vadivelu B Life with SharePoint

How to create a custom task in SRM for the standard task

Hi Gurus,
How to create a custom task in SRM for the standard task eg: TS10407929
regards,
George.

from PFTC itself. Same.

HOW TO FIND THE REQUIRED DELIVERY DATE IN VA02

hi
HOW TO FIND THE REQUIRED DELIVERY DATE IN VA02.
i want to display this field in my report. what is the fieldname and in which table it is ?

Hi Jyothsna,
There are 2 dates when you say Requested Delivery Date
1. Header level in VBAK-VDATU is the field
2. At item level it is in the schedule line. VBEP-EDATU.
The relationship between item (VBAP ) and schedule line ( VBEP )is 1 to many. But there will be mutiple schedule lines only if you are using the scheduling functionality. Also note to check for confirmed quantity (VBEP-BMENG) to be greater than 0 and use that schedule lines EDATU date as Requested delivery date.
regards,
Advait Gode.

How can I view my full billing history for the app and music stores without iTunes installed?

I just received an email receipt from Paypal showing a $12.99 purchase from iTunes. I almost NEVER purchase anything over around five dollars in the app or music store. Since PayPal does not show what this purchase was for, I have not received the receipt from Apple yet, and I cannot find anyway to look up online what this purchase was for....I need help to find out ASAP what this purchase was. If my account has been compromised or if I have been incorrectly charged for something, I would like to get the issue handled immediately. I do not want to install iTunes on my PC (nor should I have to for Pete's sake), but I cannot see anything recent at all in my app or music history on my iPad (not that I would ever purchase anything for $12.99 anyway...I just don't). Thanks in advance for any tips!

How can I view my full billing history for the app and music stores without iTunes installed?
No.
If my account has been compromised
If you even think this may have happened, immediately change your password.
See this -> Apple ID: Changing your password

How can I just disable "navigation toolbar" completely for the App Tabs? I don't want to disable this for other normal tabs.

How can I just disable "navigation toolbar" completely for the App Tabs? I don't want to disable this for other normal tabs. This is important as otherwise while I am in the app tab, i mistakenly start browsing from that tab and meaning of the app tab is completely lost...

How can I view my full billing history for the app and music stores without iTunes installed?
No.
If my account has been compromised
If you even think this may have happened, immediately change your password.
See this -> Apple ID: Changing your password

What is NetAuthAgent and how can I get it to stop looking for the unnamed file?

Since the last Mountain Lion update on my MacBook Pro, I get this error message every few minutes:
   2013-12-16 1:19:04.338 PM NetAuthAgent[1739]:
      inErrorInfo = {
           AuthType = Server;
           ErrorNumber = 45;
           ErrorType = 4;
          Scheme = file;
How can I get it to stop looking for the unnamed file?
Kat Nagel

If streaming music when connected to your carrier's cellular network, it uses cellular data.
Only the music you purchased from the iTunes Store can be streamed unless you have purchased iTunes Match.
If there is a slow down at the server where the music is stored or high traffic, steaming can be paused. You can also download a song from the iTunes Store cloud to your iPhone so it doesn't need to be steamed.

How to fire event to generate insert message for the child objects?

We are in process to integrate CRM On Demand and existing Microsoft SQL DB.
We have the following problem:
For ex., we have CRM Object_1 that already synchronized with the SQL DB. CRM also has independent Object_2 and its child Object_2.1
We dicided that we want to connect the Object_2 as child to the Object_1.
The question is how to fire event to generate insert message for the Object_2 and Object_2.1?
What is the best technique? Is it possible to do it by workflow configuration or it needs to be done programmatically?
Thanks,
Dmitry
Edited by: 955827 on Aug 29, 2012 11:57 AM

Hi,
integration events can be generated only via worklow. You will need to create separate workflows for each record type (regardless if it is child or parent) because a workflow for the parent record type will not trigger when a child record is created/ associated. Also, the association workflows will trigger only when the specific event occurs.
There is not way to generate the integrtaion events programatically. They are generated by workflows and are read/ interpreted by a code extension.

How can I view and download iprocurement history for the past 1 year in Oracle?

Hi,
I'm presently using Oracle 12, how can i view and download iprocurement history for the past 1 year or longer in Oracle? The purpose is to view approval of claims etc..
if not, where can i retrieve this information in oracle?
Appreciate your urgent assistance.
Best Regards, Michael

Sign into your Account > Click on your account name > Click on Account > Purchase History
iTunes Store & Mac App Store: Seeing your purchase history and order numbers - http://support.apple.com/kb/HT2727
Direct link - https://phobos.apple.com/WebObjects/MZFinance.woa/wa/purchaseHistory

Maintain pricing conditions for the material for the excise invoice date

When I am doing MIGO (Release GR Blocked Stock-movement type) t)he system is giving an error "Maintain pricing conditions for the material for the excise invoice date"I am attaching screen shot for reference.
I request if any one can provide me the solution

Hi,
Check did you have entry of that movement type in the following path where you specify which movement type relating to goods receipts involve excise invoices
SPRO -
> Logistics general -> tax on Goods Movements-> India -> Business Transactions--> Specify Which Movement Types Involve Excise Invoices
Regards,
Biju K

How to see all users who are allowed permissions for the specified entity ?

How to see all users who are allowed permissions for the specified entity ?
And change user permissions for the current entity
from Moscow with money

Vincent,
... and how to change entity permissions for some users?
from Moscow with money

How can I view my iTunes purchase history for the last year?

How can I view my iTunes purchase history for the last year?
(My account in the iTunes store will only give me my RECENT purchases)

Sign into your Account > Click on your account name > Click on Account > Purchase History
iTunes Store & Mac App Store: Seeing your purchase history and order numbers - http://support.apple.com/kb/HT2727
Direct link - https://phobos.apple.com/WebObjects/MZFinance.woa/wa/purchaseHistory

TS4002 Hello, icloud receive messages from gilly hicks, but does not receive messages from another personal account... this is happening me since one week and i dont know how to solve this.... error in the mail delivery system says not valid IPv4 SMTP err

Hello, icloud receive messages from gilly hicks, but does not receive messages from another personal account... this is happening me since one week and i dont know how to solve this.... error in the mail delivery system says not valid IPv4
SMTP error from remote mail server after RCPT TO:<[email protected]>:
host mx6.me.com.akadns.net [17.158.8.114]: 550 5.7.0 Blocked - see https://support.proofpoint.com/dnsbl-lookup.cgi?ip=184.173.9.56:
[email protected]
i do alse receive from gmail....
please help... what is happening!!!!

Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app. I am certain other applications also need this information. Although lengthy, I could not find a more comprehensive place to retrieve this information. Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

How to list a material in a plant for the specified delivery date

Similar Messages

Maybe you are looking for