How to load 256 length field from r/3 to BW & How to report in Bex Browser

Hi,
We have a field consists of 256 length in r/3 system.
I want to load from R/3 -> BIW -> Bex Reporting.
What are the steps to be taken in R/3 Side.
What are the steps to be taken in BW side.
What are the steps to be taken for Bex.
Thanks,
Madhu

MAdhu,
If you want to extract the data from R/3 to BW fro which the field length is 256 then its not possible directly.
Either you need to breeak up the same filed into 5 Infoobjects since the maximum length of the infoobject is 60 or else you need to maintain a conversion routine... And the remaining process of loading the data from R/3 to BIW is the same.
Hope this helps...
Gattu

Similar Messages

  • Can anyone tell me how to load my music library from my PC down to my IPad??

    Some how when I updated the OS on my IPad I lost all my music in the IPOD section.  I would like to find out how to load my music library from my PC to my IPad?  Thanks.

    If you use iTunes See Here
    Syncing with iTunes
    From Here
    http://www.apple.com/support/ipad/syncing/
    Ipad User Guide
    http://manuals.info.apple.com/en_US/ipad_2_user_guide.pdf

  • How to pass PO customer fields from ECC to SUS ?

    Hi Gurus,
    We defined a customer PO field at ECC side and want to pass it to SUS and diaplay it in SUS PO, my question is, how to pass PO customer fields from ECC to SUS?
    Please advise.
    Thanks and best regards
    jack

    Hi jackytam  ,
    /people/yeusheng.teo/blog/2008/01/05/ordering-unit-vs-order-pricing-unit-in-srm-sus
    you make get some pointers
    regards,
    Neelima

  • How to disable certain form fields from a calculation with a check mark fields.

    How to disable certain form fields from a calculation with a check mark fields.
    In Canada we have to taxes
    I create a form that calculate them to a total
    I need to be able to turn off any of those to taxes to participate to the calculation and their visibile field should become 0
    I was thinking using a checkbox (when checkbox is on (Yes) the tax is calculated, Not ticked (Off) the tax is not calculated and the visible field should show 0 or nothing....
    I really need help on this one — I’m a complete newbie....
    Remark that the second tax is calculated on the sum of what the first tax add (first tax is pan-canadian tax (all provinces).
    The second tax is never use alone (Quebec only (on top of the Canadian one)
    Sometime for outside Canada sell - No tax at all is calculated....
    What should I do?

    I want to tank you to help, really appreciate —>
    This is the code and order... I just trow the checkbox in there (they have, so far, no purpose...)
    The code use is
    var a = this.getField("pricehorstx");
    event.value = Math.round (a.value * 7.25) / 100
    I guess -If the checkBox are check - The tax should be calculate — If “Off” the tax should be not calculated and PriceHST and /or PriceQST should show zero or be empty — The HST is always calculated in Canada, but the QST is added only in Quebec.
    I need to turn both to Zero for international sale.
    Message was edited by: Chacapamac

  • How can I edit my website from another computer? and how can I create a new website next to the one, I have already? Can anyone help, please?

    How can I edit my website from another computer? and how can I create a new website next to the one, I already have? Can anyone help, please?

    Move the domain.sites file from one computer to the other.
    The file is located under User/Library/Application Support/iWeb/domain.sites.  Move this file to the same location on the other computer and double click and iWeb will open it.  Remember, it is your User Library that you want and not your System Library, as you will not find iWeb there.
    Just create a new site on the same domain file and it will appear below the other site.  If you want them side by side then duplicate your domain file and have one site per a domain file and they can then be side by side.

  • How to remove the IT policy from my Torch 9800, or how to reset the device to original setting

    I have a Torch 9800 formerly- used for business emails. According to our company policy there was an IT policy installed to the device hence would force the user to set password protecting the device.
    Now this device has been retired and I like to use it only for regular phone calls thus do not like to have a password protection. My question is:
    How to remove the IT policy from the device?
    or
    How to reset the device to original setting?
    I have been trying to swipe and scrub the device several times but that IT policy still exist. Need help......
    Solved!
    Go to Solution.

    See the RIM Knowledge Base article here for information on how to remove an IT Policy. See the Method Three in the link:
    KB14202 How to remove an IT policy from a BlackBerry smartphone
    Read this RIM Knowledge Base article to reset your device to the factory settings.
    KB18998 How to reset a BlackBerry smartphone to factory defaults
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Bank statement: problem to load variable length field

    we have many bank accounts with different banks, and we would like to use the bank reconciliation module to do bank reconciliation.
    we have problem in load the MT940 bank statement. All these banks are providing so called standard SWIFT940 format, which not able to give fixed length field.
    we have problem on line 61 which have a lot of variable length fields.
    line 61 comprise of 7 fields, which are:
    A) Value date - fixed 6 chars.
    B) Entry date - fixed 4 chars.
    C) Credit/debit - variable 1-2 chars.
    D) Fund Code - fixed 1 char
    E) Transaction amount - variable 15 chars
    F) Transaction code/type - fixed 4 chars
    G) MID, cheque#, BIS - variable 16 chars
    How can we write the SQL Loader script if there is no delimiter, and the start position of the fields are not fixed?
    we can load A and B easily, but C onwards we will have problems.
    please help.
    INTO TABLE ce_stmt_int_tmp
    WHEN rec_id_no = '61'
    TRAILING NULLCOLS
    (rec_no RECNUM,
    rec_id_no POSITION(1:2) CHAR,
    column1 POSITION(4:9) CHAR,
    column2 POSITION(10:13) CHAR,
    column3 ??
    column4 ??
    column5 ??
    column6 ??
    column7 ??
    ------

    Hi Linda,
    As said by gupta, please check, whether the bank statement has the statement 62F:
    If not, please get the statement again from bank and ensure that the end statement 62F exists in the statement..
    This will help you to overcome your problem..
    Regards,
    Praisty

  • ABAP PROXY - how to load a new field into SAP SNC system

    I am also curious about the proxy process. Please let me know if you know of a post that has mentioned this before.
    We have to customize our Delivery Schedule Notification proxy. I already regenerated the standard one into a Z proxy name. I already put in my custom code to load Z fields into a Z table.
    Here is my new problem. The users wants more additional fields.
    Here is the standard proxy generated layout for this structure:
    /SCA/BIF_S_DELIVERY_SCHEDULE
    CONTROLLER
    ID
    TYPE_CODE
    CREATION_DATE_TIME
    BUYER_PARTY
    VENDOR_PARTY
    BILL_TO_PARTY
    NOTE
    ITEM
    Here is the new proxy generated layout for this structure:
    ZDELIVERY_SCHEDULE_NOTIFICATIO
    CONTROLLER
    ID
    TYPE_CODE
    CREATION_DATE_TIME
    BUYER_PARTY
    VENDOR_PARTY
    SUPPLYING_VENDOR
    BILL_TO_PARTY
    NOTE
    ITEM
    Notice that SUPPLYING_VENDOR is the new field. VENDOR_PARTY is already loaded into the system. How can I get SUPPLYING_VENDOR loaded into the database?
    Thank you in advance for your assistance.
    Edited by: DAVID CRAIG on Jul 29, 2009 2:16 PM

    Hello.
    Thank you for the information.  I need to clarify my situation.
    I understand there is a PROVIDER CLASS.  Within that PROVIDER CLASS there is a METHOD.   Inside that METHOD there is a place for me to put my code in.  I have already done that work for a previous requirement.  I moved Z fields to a Z table.
    My new requirement has a field SUPPYING_VENDOR that was inserted into one of the SAP structures.  It was placed next to VENDOR_PARTY.
    Here are my steps of execution:
    1.  Go to transaction /N/SCA/ICH_S (SNC Supplier View)
    2.  Click on RELEASE
    3.  Click on RELEASE OVERVIEW
    4.  Click on GO
    5.  Click on DETAILS
    6.  Click on the SHIP-FROM LOCATION tab
    The SHIP-FROM LOCATION field is currently being populated by the VENDOR_PARTY field from the proxy.  This is done automatically by SAP.
    1.  How do I find the table and field name for that field?  This is in the Supply Network Collaboration screen, not normal SAP transaction.
    2.  How do I get that SUPPLYING_VENDOR data to populate SHIP-FROM LOCATION instead of VENDOR_PARTY?

  • How to load a selective request from PSA to DSO using DTP?

    Hi Gurus,
    The PSA is having 3 requests, how to load the request number 2 from psa to DSO using DTP?
    Thanks
    SDP
    Edited by: SDPSAP on Nov 15, 2011 7:58 PM

    Let us say that requests are 1,2 and 3. 1 being the first one and 3 is the last one. Now you need to load request 2 in DSO from PSA.
    - create a Delta DTP
    - Tick "Only Get Delta Once"
    - Tick "Get One Request Only"
    - Untick "Reterive Until No More New Data"
    - execute the DTP, it will load request 1 to DSO
    - delete this request from DTP
    - execute DTP again, it will load request 2 to DSO; this is what you need.
    If DSO is write optimized, you do not need to untick "Reterive Until no More New Data"; just execute the DTP, it will create 3 requests in DSO, delete first and last and you will get only 2 in DSO.
    I hope it helps.
    Regards,
    Gaurav

  • How to Load Master Data Text  from Multiple Source Systems

    Situation:  Loading vendor master (text) from two systems.  Some of the vendor keys/number are the same and so is the description.  I understand that if I was loading Attributes, I could create another attribute such a source system id and compound it to 0Vendor.  However, I don't believe you can do the same when loading text. 
    Question:  So, how can I load duplicate vendor keys and description into BW using the *_TEXT datasource so they do not overwrite?
    Thanks!

    Hi,
    Don't doubt, it'll work!
    Sys ID as compound to 0Vendor.
    If you doubt about predefined structure of the *_TEXT datasource and direct infosource, then use a flexible infosource. Maybe you'll have to derive the sys ID in a routine or a formula.
    Best regards,
    Eugene

  • How to load date and time from text file to oracle table through sqlloader

    hi friends
    i need you to show me what i miss to load date and time from text file to oracle table through sqlloader
    this is my data in this path (c:\external\my_data.txt)
    7369,SMITH,17-NOV-81,09:14:04,CLERK,20
    7499,ALLEN,01-MAY-81,17:06:08,SALESMAN,30
    7521,WARD,09-JUN-81,17:06:30,SALESMAN,30
    7566,JONES,02-APR-81,09:24:10,MANAGER,20
    7654,MARTIN,28-SEP-81,17:24:10,SALESMAN,30my table in database emp2
    create table emp2 (empno number,
                      ename varchar2(20),
                      hiredate date,
                      etime date,
                      ejob varchar2(20),
                      deptno number);the control file code in this path (c:\external\ctrl.ctl)
    load data
    infile 'C:\external\my_data.txt'
    into table emp2
    fields terminated by ','
    (empno, ename, hiredate, etime, ejob, deptno)this is the error :
    C:\>sqlldr scott/tiger control=C:\external\ctrl.ctl
    SQL*Loader: Release 10.2.0.1.0 - Production on Mon May 31 09:45:10 2010
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    Commit point reached - logical record count 5
    C:\>any help i greatly appreciated
    thanks
    Edited by: user10947262 on May 31, 2010 9:47 AM

    load data
    infile 'C:\external\my_data.txt'
    into table emp2
    fields terminated by ','
    (empno, ename, hiredate, etime, ejob, deptno)Try
    load data
    infile 'C:\external\my_data.txt'
    into table emp2
    fields terminated by ','
    (empno, ename, hiredate, etime "to_date(:etime,'hh24:mi:ss')", ejob, deptno)
    this is the error :
    C:\>sqlldr scott/tiger control=C:\external\ctrl.ctl
    SQL*Loader: Release 10.2.0.1.0 - Production on Mon May 31 09:45:10 2010
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    Commit point reached - logical record count 5
    C:\>
    That's not an error, you can see errors within log and bad files.

  • How to get only custom fields from a SharePoint 2010 list?

    I am working with the Client Side Object Model. In a console application I am retrieving all fields from a custom list. The problem is the Clientcontext fetches me a bunch of internal fields I do not want to be included. Also this causes some of the fields
    to appear more than once.
    string siteURL = "http:XYZ";
    ClientContext context = new ClientContext(siteURL);
    Web oWebSite = context.Web;
    context.Load(oWebSite);
    context.ExecuteQuery();
    //Get the list by title
    List produktKatalogListe = spLists.GetByTitle("Produktkatalog");
    CamlQuery camlQuery = new CamlQuery();
    camlQuery.ViewXml = "<View/>";
    ListItemCollection listItems = produktKatalogListe.GetItems(camlQuery);
    context.Load(produktKatalogListe);
    context.Load(listItems);
    context.Load(produktKatalogListe.Fields);
    context.ExecuteQuery();
    foreach(Field field in produktKatalogListe.Fields)
    Console.WriteLine("{0} - {1} - {2} - {3} - {4}",field.Title,field.InternalName,field.Hidden,field.CanBeDeleted,field.FieldTypeKind);
    Is there a way to print only custom fields? This would mean omitting fields like
    internalID, GUID...
    I tried the following:
    if(!field.Hidden)
    Console.WriteLine("{0} - {1} - {2} - {3} - {4}",field.Title,field.InternalName,field.Hidden,field.CanBeDeleted,field.FieldTypeKind);
    Unfortunately this not only does not solve the issue but is also not a very good solution for the case I do want to display custom but hidden fields.
    Algorithmen und Datenstrukturen in C#:
    TechNet Wiki

    The following approach seems to solve the issue. Instead for checking if the field is not
    Hidden I checked whether it is not FromBaseType.
    if(!field.FromBaseType)
    Console.WriteLine("{0} - {1} - {2} - {3} - {4}",field.Title,field.InternalName,field.Hidden,field.CanBeDeleted,field.FieldTypeKind);
    Algorithmen und Datenstrukturen in C#:
    TechNet Wiki

  • How to know querry level fields from which tables in the source system

    Hi Experts,
    let's say we've two fields in the querry e.g: Actual GI Quantity, Actual Value of GI
    This fields from PP Querris level how would i know from which table we're getting data is there any easy process to find out please drop your suggestions..
    Next doubt is when generate querry e.g. PM Module we don't know exatly what're the available tables & fields technical names but in my currently project using SAP Delivered Infocubes & Querries at the moment  & generating querries but when we test in the Portal it's shows some fields '0', X. I've to check in source system weather it's having any values or not.
    Can anybody drops your valuable words
    Cheers
    Suresh

    Hi all,
    I'm a colleague of Maarten, and I think maybe we didn't explain well enough what we want. So let me try to elaborate:
    We want to obtain the reference (within the SOAP-Body of the XI-message) to the attachment which contains the main payload (at least, in XI itself). This reference seems to have gone missing, once our adapter module (after having gone through XI) is entered (and, by the way, before we enter the SOAP-receiver-adapter).
    The JAVA-representation of the XI-message seems to hide the fact that in XI itself, the main payload is an attachment, referenced from within the SOAP-Body.
    Nevertheless, we would like to obtain/retain(?) that reference, in order to put it in our own to-be-created-additional-attachment, which would go (via the PayloadSwapBean-module of SAP) into the SOAP-body of the final SOAP-call, and should then reference the 'new attachment' (which was (in XI itself) the main payload).
    So, I think both answers (up to now) don't help us much (however: thanks for your reaction anyway of course).
    So, maybe someone has another idea?
    Regards, Fred

  • How to map a custom field from EBAN to EKPO?

    Dear Experts.
    We have added a custom field to the EBAN table using include CI_EBANDB. When creating a Purchase Requisition, the field is filled with a value. How can we make sure that this value is transferred to the EKPO custom field at the moment that we create a Purchase Order out of this Purchase Requisition?
    Maybe this is possible by using enhancement MM06E005? Please advise how to do this?
    Best Regards,
    Tom
    will award points for good answers.

    But how can I implement this enhancement to achieve this? And how can I fetch the value from the purchase requisition?
    Regards,
    Tom

  • How to Load Dates Data type from txtfile to Hyperion Planning

    I have loaded numeric and string data for especify combination, for example
    soruce Txtfile:
    Year Measures Market Data1 Data2
    "Jan","Sales","New York","120","2013/01/01"
    Hyperion Planning:
    (combinations in my target)
    Jan,Sales,NewYork,E_1011--->120
    Jan,Sales,NewYork,E_1008--->"not loaded"
    E_1011 is defined as Numeric data type in Hyperion Planning
    E_1008 is defined as Date data type in Hyperion Planning
    In my Interface source file, field Data1,Data2 is defined as "String", why ODI is loading only Data1 field?, how can I do for load Data2 field.
    Thanks for your help.

    AFAIK, I don't think you can use the same description for multiple members.
    What i would suggest is to concatenate your member name and alias and use that as Alias. As your account member is the placeholder and would not confuse anyone. Ensure that you maintain the 80 character limit
    Regards
    Amarnath
    ORACLE | Essbase

Maybe you are looking for