How to load a .cap file

i am new to smartcard programming...
now i am able to compile sample card program and and generated .cap file.
now my question is how to load that .cap file onto simulator and also smartcard.
my requirement is to store some value on smart card and retrive that value and update it. what is the process to achive this.plz mail me in detail to my id : [email protected] or [email protected]
advance thanks for mailing to me ....

Similar Messages

How to Load the cap file to the SSD with DAP

Dear everybody,
How to use upload, load and install command to load cap file to the SSD with DAP?
My step:
1 I have already input the DAP Key into the SSD.
2 Select ISD
3 Do auth
4 Upload -s ssdaid -d "XXX.cap", but JCOP return 6985.
I don't kown why.
Thank you very much.
Edited by: Ivy_D on May 20, 2009 12:16 AM

(The JCOP3.1,1 Eclipse Plugin's emulator) install for load still complains 6985 after i did these belows step by step. I will appreciate yours helps very much!
1: install a new security domain.
cm> install -s -b -i A000000003535042 A0000000035350 A000000003535041
=> 80 E6 0C 00 20 07 A0 00 00 00 03 53 50 08 A0 00 .... ......SP...
00 00 03 53 50 41 08 A0 00 00 00 03 53 50 41 01 ...SPA......SPA.
C0 02 C9 00 00 00 ......
(5227 usec)
<= 90 00
cm> /select A000000003535041
=> 00 A4 04 00 08 A0 00 00 00 03 53 50 41 00 ..........SPA.
(2303 usec)
<= 6F 10 84 08 A0 00 00 00 03 53 50 41 A5 04 9F 65 o........SPA...e
01 FF 90 00 ....
Status: No Error
2.1 use the ISD key to build a security channle by ISD to personalize the new secuirty domain
cm> set-key 255/1/DES-ECB/404142434445464748494a4b4c4d4e4f 255/2/DES-ECB/404142434445464748494a4b4c4d4e4f 255/3/DES-ECB/404142434445464748494a4b4c4d4e4f
cm> auth
=> 80 50 00 00 08 40 74 01 18 F9 FA 68 07 00 [email protected]..
(2274 usec)
<= 00 00 57 F3 97 D9 7F 72 88 55 FF 02 00 02 81 8D ..W....r.U......
91 65 B4 F2 A9 29 B2 C0 A4 AD FD C5 90 00 .e...)........
Status: No Error
=> 84 82 00 00 10 DE 01 A2 F1 79 12 8F 2E 87 6F FE .........y....o.
63 0E E4 5D 40 c..]@
(1969 usec)
cm> put-pub-key --tokenpin 123456 115 c:/gptest.p12
=> 80 D8 00 01 88 73 A1 80 EA 15 24 8C 5C 26 E1 31 .....s....$.\&.1
02 FE B1 44 0E 37 4F D5 49 29 25 14 5C 7B E0 63 ...D.7O.I)%.\{.c
87 0C E8 B8 03 FF AF 0B F2 2B 54 6A 16 4A D6 8F .........+Tj.J..+
EE B6 E0 1A 29 F2 13 E8 2B 04 FC 5F 2F D2 51 ED ....)....._/.Q._
_18 40 D3 E1 AF 36 CA A2 58 45 AC 38 3D 5F D4 56 [email protected]=_.V
56 D8 87 5D 45 86 B9 36 F0 07 88 AD 59 78 A1 03 V..]E..6....Yx..
2D F4 DE E9 51 E3 75 65 E3 2B B7 49 11 A5 E3 75 -...Q.ue.+.I...u
39 25 1C 44 FB D5 3C 57 40 DD 64 22 D0 0A 8E 88 9%.D..<[email protected]"....
2C 52 7B E2 67 A4 0B 65 A0 03 01 00 01 00 ,R{.g..e......
(2614 usec)
<= 73 90 00
cm> card-info
=> 80 F2 80 00 02 4F 00 00 .....O..
(1488 usec)
<= 08 A0 00 00 00 03 00 00 00 01 9E 90 00 .............
Status: No Error
=> 80 F2 40 00 02 4F 00 00 [email protected]..
(2125 usec)
<= 08 A0 00 00 00 03 53 50 42 0F C0 90 00 ......SPB....
Status: No Error
=> 80 F2 10 00 02 4F 00 00 .....O..
(1794 usec)
<= 07 A0 00 00 00 03 53 50 01 00 01 08 A0 00 00 00 ......SP........
03 53 50 41 90 00 .SPA..
Status: No Error
Card Manager AID : A000000003000000
Card Manager state : OP_READY
Sec. Domain:{color:#ff0000}PERSONALIZED (SV------) A000000003535042{color}
Load File : LOADED (--------) A0000000035350 (Security Domain)
Module : A000000003535041
cm> /cap-sign --tokenpin 123456 a.cap A000000003535042 c:/gptest.p12
cm> /cap-info a.cap
SHA (Load File data): {color:#ff0000}1BD8F3CCC0042A5EEF9845FA3C667834051F4FAD{color} -- Load File Data Block Hash
SHA (Load File dbg) : A36B4AED89FF8C4B8D8BBDDEB40757E36477143F
SHA (Load File) : 0D4AD84E20D00C26ABA1BF5677636414234F5743
DAP block(s) :
DAP block : 1
AID : A000000003535042
Signature : 19F414292C00F9B7C89E7341A13AF15B
CCF90D17A112418EAF556B5172EBE39C
E05DF0CDDD68EFD2559CC7EC591878DF
14B5C0FBC5C6CF6A0DC6E50B4AC99216
7D6C46DC4098E0A1AC11DB69596E4A71
F34CBFBD7DFABA88C6E8C2348FF8A9FC
A8E22074B4D1B9D2AB5993A539BE8E1F
6187252B9912909AE1DA4E5FAE866960
Algorithm : VOP 2.0.1'
Signed by : c=CN, st=beijing, l=beijing, o=logis, ou=logiscn, cn=gptest
Load Token(s) : none
Install Token(s) : none
then send install for load
cm> send 80E602002908{color:#ff0000}72666370626F6332{color}08{color:#ff0000}A000000003535042{color}14{color:#ff0000}1BD8F3CCC0042A5EEF9845FA3C667834051F4FAD{color}000000
=> 80 E6 02 00 29 08 72 66 63 70 62 6F 63 32 08 A0
00 00 00 03 53 50 42 14 1B D8 F3 CC C0 04 2A 5E
EF 98 45 FA 3C 66 78 34 05 1F 4F AD 00 00 00
(3108 usec)
<= 69 85 i.
Status: Conditions of use not satisfied

How to load the .cap file in a Smart Card?

Dear All,
Hello..!!
I am using JCDK 2.2 and have used Eclipse JCDK.
I have written a simple read/write applet and created a .cap file using Eclipse's Converter Java Card tool.
What is the next step to be done?
I have a smart card device and have installed its drivers.
When do the APDU commands come into picture?
Expecting help.
Thanks a lot.
Regards,
Suril

Suril Sarvaiya wrote:
Hi Shane....
Thnx a lot....
I have downloaded GP-Shell 1.4.4
When I open its application and write any command and press enter ; the app window closes immendiately.
Can you please help me on this?
One more thing Shane......
I'm writig a java class using javax.smartcardio
I have installed drivers of Omnikey 3021
but the TerminalFactory is not detecting it?
Any idea on that?
Thanks again...
Regards,
SurilHi all,
Is Mr. thread starter has solved his problem?
I profit this thread to post my question. I'm working with new environment and I have problem loading cap file into my smartcard.
specification come first :-)
- My smartcard is said to be JC2.2.1 and GP2.1.1 compatible
- My code (for testing) is written in Java under eclipse Helios service 2 with JavaCard plugin (for JC2.2.2)
I compile my code with JDK 1.3 (for compatible version) and using the JC plugin to generate cap file (along with exp and jca).
My problem is exactly the same as one that was posted in this forum about 2 years ago but is not answered :-)
[Problem Loading Application to Card |http://forums.oracle.com/forums/thread.jspa?threadID=1749334&tstart=420]
+ I successfully authenticate with smartcard
+ APDU command Install for Load is executed successfully
+ BUT the APDU command LOAD file fails with returned status word is 6424
For details, I post here my javacard applet code and APDU command executed with my tool:
package mksAuthSys;
import javacard.framework.APDU;
import javacard.framework.Applet;
import javacard.framework.ISO7816;
import javacard.framework.ISOException;
import javacard.framework.OwnerPIN;
public class Jcardlet extends Applet {
     private final static byte[] myPIN = { (byte) 0x01, (byte) 0x02, (byte) 0x03, (byte) 0x04};
     final static byte Jcardlet_CLA =(byte)0xB0;
     final static byte VERIFY = (byte) 0x20;
     final static byte PIN_TRY_LIMIT =(byte)0x03;
     final static byte MAX_PIN_SIZE =(byte)0x08;
     final static short SW_VERIFICATION_FAILED = 0x6300;
     OwnerPIN pin;
     private Jcardlet() {
          pin = new OwnerPIN(PIN_TRY_LIMIT, MAX_PIN_SIZE);
          pin.update(myPIN, (byte) 0, (byte) 4 );
         register();
     public static void install(byte bArray[], short bOffset, byte bLength)
               throws ISOException {
          new Jcardlet().register();
     public boolean select() {
          if ( pin.getTriesRemaining() == 0 ) return false;
         return true;
     public void deselect(){
          pin.reset();
     //@Override
     public void process(APDU apdu) throws ISOException {
          // TODO Auto-generated method stub
          byte[] buffer = apdu.getBuffer();
          if ((buffer[ISO7816.OFFSET_CLA] == 0) &&
                  (buffer[ISO7816.OFFSET_INS] == (byte)(0xA4))) return;
          if (buffer[ISO7816.OFFSET_CLA] != Jcardlet_CLA)
                ISOException.throwIt(ISO7816.SW_CLA_NOT_SUPPORTED);
          switch (buffer[ISO7816.OFFSET_INS]) {
           case VERIFY: verify(apdu);
             return;
           default: ISOException.throwIt (ISO7816.SW_INS_NOT_SUPPORTED);
     private void verify(APDU apdu) {
          // TODO Auto-generated method stub
         byte[] buffer = apdu.getBuffer();
         // retrieve the PIN data for validation.
         byte byteRead = (byte)(apdu.setIncomingAndReceive());
         // check pin
         // the PIN data is read into the APDU buffer
         // at the offset ISO7816.OFFSET_CDATA
         // the PIN data length = byteRead
         if ( pin.check(buffer, ISO7816.OFFSET_CDATA,byteRead) == false )
           ISOException.throwIt(SW_VERIFICATION_FAILED);
}And my APDU command:
Loading "D:\mksAuthSys.cap" ...
T - 80F28000024F00
C - 08A000000003000000079E9000
ISD AID : A000000003000000
T - 80E602001508F23412345610000008A00000000300000000000000
C - 009000
T - 80E80000C8C482018B010012DECAFFED010204000108F23412345610000002001F0012001F000C001500420012009D0011001C0000009F00020001000402010004001502030107A0000000620101000107A000000062000103000C0108F234123456100001002306001200800301000104040000003DFFFF0030004507009D000510188C0003188F00013D0610088C00028700AD007B000403078B0005188B00067A02308F00073D8C00088B00067A0110AD008B00096104037804780110AD008B000A7A0221198B000B2D1A0300
C - 6424
Stopped loading due to unexpected status words.Urgently look forward to hearing from you.
Thanks a bunch in advance
Best Regards,
JDL

How to load a Jar file in the class path?

How to load a Jar file which contains class files, images, etc.. in the classpath without using URLClassLoader.

You don't "load" jars. If it's on the classpath, you can obtain individual resources from it using various methods on either Class or ClassLoader. Do you mean "how to add a jar to the classpath at runtime"? Can't be done without using a classloader, typically URLClassLoader or a subclass thereof. Why you want to not use the proven method is beyond me. Presumably because you don't understand classloading. In which case, forget it.

How to load a client file in a clob using sqlcl

How to load a client file in a clob using sqlcl

You don't "load" jars. If it's on the classpath, you can obtain individual resources from it using various methods on either Class or ClassLoader. Do you mean "how to add a jar to the classpath at runtime"? Can't be done without using a classloader, typically URLClassLoader or a subclass thereof. Why you want to not use the proven method is beyond me. Presumably because you don't understand classloading. In which case, forget it.

How to load an XML file to oracle9i server?

I want to use XSU DBMS_XMLsave package to load an XML file to a relational table using PL/SQL from a distant server. Now, I don't know how to load that XML file to the distant server.
Somebody help me?

I want to use XSU DBMS_XMLsave package to load an XML file to a relational table using PL/SQL from a distant server. Now, I don't know how to load that XML file to the distant server.
Somebody help me?

"how to load a text file to oracle table"

hi to all
can anybody help me "how to load a text file to oracle table", this is first time i am doing, plz give me steps.
Regards
MKhaleel

Usage: SQLLOAD keyword=value [,keyword=value,...]
Valid Keywords:
userid -- ORACLE username/password
control -- Control file name
log -- Log file name
bad -- Bad file name
data -- Data file name
discard -- Discard file name
discardmax -- Number of discards to allow (Default all)
skip -- Number of logical records to skip (Default 0)
load -- Number of logical records to load (Default all)
errors -- Number of errors to allow (Default 50)
rows -- Number of rows in conventional path bind array or between direct path data saves (Default: Conventional path 64, Direct path all)
bindsize -- Size of conventional path bind array in bytes (Default 256000)
silent -- Suppress messages during run (header, feedback, errors, discards, partitions)
direct -- use direct path (Default FALSE)
parfile -- parameter file: name of file that contains parameter specifications
parallel -- do parallel load (Default FALSE)
file -- File to allocate extents from
skip_unusable_indexes -- disallow/allow unusable indexes or index partitions (Default FALSE)
skip_index_maintenance -- do not maintain indexes, mark affected indexes as unusable (Default FALSE)
commit_discontinued -- commit loaded rows when load is discontinued (Default FALSE)
readsize -- Size of Read buffer (Default 1048576)
external_table -- use external table for load; NOT_USED, GENERATE_ONLY, EXECUTE
(Default NOT_USED)
columnarrayrows -- Number of rows for direct path column array (Default 5000)
streamsize -- Size of direct path stream buffer in bytes (Default 256000)
multithreading -- use multithreading in direct path
resumable -- enable or disable resumable for current session (Default FALSE)
resumable_name -- text string to help identify resumable statement
resumable_timeout -- wait time (in seconds) for RESUMABLE (Default 7200)
PLEASE NOTE: Command-line parameters may be specified either by position or by keywords. An example of the former case is 'sqlldr scott/tiger foo'; an example of the latter is 'sqlldr control=foo userid=scott/tiger'. One may specify parameters by position before but not after parameters specified by keywords. For example, 'sqlldr scott/tiger control=foo logfile=log' is allowed, but 'sqlldr scott/tiger control=foo log' is not, even though the position of the parameter 'log' is correct.
SQLLDR USERID=GROWSTAR/[email protected] CONTROL=D:\PFS2004.CTL LOG=D:\PFS2004.LOG BAD=D:\PFS2004.BAD DATA=D:\PFS2004.CSV
SQLLDR USERID=GROWSTAR/[email protected] CONTROL=D:\CLAB2004.CTL LOG=D:\CLAB2004.LOG BAD=D:\CLAB2004.BAD DATA=D:\CLAB2004.CSV
SQLLDR USERID=GROWSTAR/[email protected] CONTROL=D:\GROW\DEACTIVATESTAFF\DEACTIVATESTAFF.CTL LOG=D:\GROW\DEACTIVATESTAFF\DEACTIVATESTAFF.LOG BAD=D:\GROW\DEACTIVATESTAFF\DEACTIVATESTAFF.BAD DATA=D:\GROW\DEACTIVATESTAFF\DEACTIVATESTAFF.CSV

How to load 100 CSV file to DSO / InfoCube

Hi
How to load 100 CSV files of transcational data to DSO / InfoCube?

Hi,
you can achieve to write the .bat (batch file program in windows)
.bat program it will convert to xsl to .CSV format.
in process chain you can use the OS COMMAND option while creating process chain.
it will first trigger the bat file then it will trigger the excel files and info package.
now i am also working on same scenario now.
please find the below doc how to create the process chain using os command.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0c41c52-2638-2e10-0b89-ffa4e2f10ac0?QuickLink=index&…
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3034bf3d-9dc4-2d10-9e93-d4ba01505ed9?QuickLink=index&…
Thanks,
Phani.

How to generate APDU to load a cap file?

Below is a code to load a cap that I got here.
public byte[] readJar(File file) throws IOException {
          int BLOCK_SIZE1;
          String[] xCaps;
          if(installDescriptor){
               xCaps = iCapsWD;
          }else{
               xCaps = iCapsWoD;
          JarFile jf = new JarFile(file);
          Enumeration e = jf.entries();
          byte[] result = new byte[(int)file.length()];
          int size = 0;
          int dsize = 0;
          JarEntry je;
          boolean found;
          InputStream is;
          //byte[] temp;
          for (int i = 0; i<xCaps.length; i++){
               found = false;
               e = jf.entries();
               System.out.println("searching: "+xCaps);
               while (e.hasMoreElements()){
                    je = (JarEntry)e.nextElement();
                    //System.out.println("component:"+je.getName());
                    if(je.getName().endsWith(xCaps[i])){
                         found = true;
                         is = jf.getInputStream(je);
                         int dim = (int)je.getSize();
                         //temp=new byte[dim];
                         System.out.println("found cap to install: "+xCaps[i]+" of length:"+dim);
                         try{
                              //int dim = is.available();
                              //is.read(temp);
                              //printApdu(temp);
                              is.read(result, size, dim);
                         }catch (Exception ex){
                              ex.printStackTrace();
                              System.exit( -1);
                         if(i==0){
                              BLOCK_SIZE1 = dim+4;
                         }else if(i==1){//analyze directory.cap
                              int component;
                              int ddim;
                              for (int h = 3; h<25; h += 2){
                                   component = (int)Math.floor((h-3)/2)+1;
                                   if(component==11&& !installDescriptor){//elimino descriptor da directory
                                        result[size+h] = 0;
                                        result[size+h+1] = 0;
                                   ddim = ((result[size+h]<<8)+result[size+h+1]);
                                   System.out.println("component size with tag: ["+component+"] "+ddim);
                                   dsize += ddim;
                         size += dim;
                         break;
               if( !found){
                    if(i==3||i==7||i==10){
                         System.out.println("Not found cap component for optional installing: "+xCaps[i]);
                    }else{
                         System.out.println("Critical error: Not found cap component necessary for install:"+xCaps[i]);
                         System.exit( -1);
          byte[] fresult = new byte[size];
          System.arraycopy(result, 0, fresult, 0, size);
          FileOutputStream fo = new FileOutputStream("pcapdump.cap");
          fo.write(result);
          System.out.println("size="+size+", according to directory:"+dsize);
          return fresult;
I open the result file of this program called "pcapdump.cap".
However, when I compare APDU generated by Tool and APDU
generated by this program , they are slightly different.
I wonder why these 2 APDU results are different.
Can anyone help me to corrent above code?
Please~

Please read the "Java Card Development Kit User’s Guide" Chapter 11. Using the Installer. There you find a detailed description how to install a java card applet.
The JC-dev User's Guid comes as HTML & PDF document with the Java Card development Kit - subdirectory "doc".
Jan

Verify user pin on a smart card & load a cap file on a card (with eclipse)

I have been able install JCWDE (Java card development Kit) successfully on eclipse.Basically all I need to do is verify user pin on a smart card.As in first set a pin and then verify it.
To begin with I have referred many tutorials (here: http://www.javaworld.com/jw-07-1999/jw-07-javacard.html?page=1) and implemented the wallet code in eclipse.I have the cap file generated and the scripts generated.I am not sure how to load it on the smart card with eclipse.
I tried to deploy the cap file but it keeps saying connected.Also when we initiate the applet I get the same result.
output:
Java Card 2.2.2 APDU Tool, Version 1.3
Copyright 2005 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms.
Opening connection to localhost on port 9032.
Connected.
I have also tried : http://www.cs.ru.nl/E.Poll/hw/practical.html ........ but no luck.
I have the wallet.cap ,wallet.exp ,wallet.jca ,wallet.opt create.script, select,cap-download.scripts files already generated in eclipse.
How does a successfully implemented applet code on a smart card work?How does this wallet code work if it is successfully implemented ? Does it have like some GUI which prompts the user to enter the pin?
Wallet code for reference :
package com.sun.javacard.samples.wallet;
import javacard.framework.*;
public class Wallet extends Applet {
/* constants declaration */
// code of CLA byte in the command APDU header
final static byte Wallet_CLA =(byte)0x80;
// codes of INS byte in the command APDU header
final static byte VERIFY = (byte) 0x20;
final static byte CREDIT = (byte) 0x30;
final static byte DEBIT = (byte) 0x40;
final static byte GET_BALANCE = (byte) 0x50;
// maximum balance
final static short MAX_BALANCE = 0x7FFF;
// maximum transaction amount
final static byte MAX_TRANSACTION_AMOUNT = 127;
// maximum number of incorrect tries before the
// PIN is blockedd
final static byte PIN_TRY_LIMIT =(byte)0x03;
// maximum size PIN
final static byte MAX_PIN_SIZE =(byte)0x08;
// signal that the PIN verification failed
final static short SW_VERIFICATION_FAILED =
0x6300;
// signal the the PIN validation is required
// for a credit or a debit transaction
final static short SW_PIN_VERIFICATION_REQUIRED =
0x6301;
// signal invalid transaction amount
// amount > MAX_TRANSACTION_AMOUNT or amount < 0
final static short SW_INVALID_TRANSACTION_AMOUNT = 0x6A83;
// signal that the balance exceed the maximum
final static short SW_EXCEED_MAXIMUM_BALANCE = 0x6A84;
// signal the the balance becomes negative
final static short SW_NEGATIVE_BALANCE = 0x6A85;
/* instance variables declaration */
OwnerPIN pin;
short balance;
private Wallet (byte[] bArray,short bOffset,byte bLength) {
// It is good programming practice to allocate
// all the memory that an applet needs during
// its lifetime inside the constructor
pin = new OwnerPIN(PIN_TRY_LIMIT, MAX_PIN_SIZE);
byte iLen = bArray[bOffset]; // aid length
bOffset = (short) (bOffset+iLen+1);
byte cLen = bArray[bOffset]; // info length
bOffset = (short) (bOffset+cLen+1);
byte aLen = bArray[bOffset]; // applet data length
// The installation parameters contain the PIN
// initialization value
pin.update(bArray, (short)(bOffset+1), aLen);
register();
} // end of the constructor
public static void install(byte[] bArray, short bOffset, byte bLength) {
// create a Wallet applet instance
new Wallet(bArray, bOffset, bLength);
} // end of install method
public boolean select() {
// The applet declines to be selected
// if the pin is blocked.
if ( pin.getTriesRemaining() == 0 )
return false;
return true;
}// end of select method
public void deselect() {
// reset the pin value
pin.reset();
public void process(APDU apdu) {
// APDU object carries a byte array (buffer) to
// transfer incoming and outgoing APDU header
// and data bytes between card and CAD
// At this point, only the first header bytes
// [CLA, INS, P1, P2, P3] are available in
// the APDU buffer.
// The interface javacard.framework.ISO7816
// declares constants to denote the offset of
// these bytes in the APDU buffer
byte[] buffer = apdu.getBuffer();
// check SELECT APDU command
if (apdu.isISOInterindustryCLA()) {
if (buffer[ISO7816.OFFSET_INS] == (byte)(0xA4)) {
return;
} else {
ISOException.throwIt (ISO7816.SW_CLA_NOT_SUPPORTED);
// verify the reset of commands have the
// correct CLA byte, which specifies the
// command structure
if (buffer[ISO7816.OFFSET_CLA] != Wallet_CLA)
ISOException.throwIt(ISO7816.SW_CLA_NOT_SUPPORTED);
switch (buffer[ISO7816.OFFSET_INS]) {
case GET_BALANCE:
getBalance(apdu);
return;
case DEBIT:
debit(apdu);
return;
case CREDIT:
credit(apdu);
return;
case VERIFY:
verify(apdu);
return;
default:
ISOException.throwIt(ISO7816.SW_INS_NOT_SUPPORTED);
} // end of process method
private void credit(APDU apdu) {
// access authentication
if ( ! pin.isValidated() )
ISOException.throwIt(SW_PIN_VERIFICATION_REQUIRED);
byte[] buffer = apdu.getBuffer();
// Lc byte denotes the number of bytes in the
// data field of the command APDU
byte numBytes = buffer[ISO7816.OFFSET_LC];
// indicate that this APDU has incoming data
// and receive data starting from the offset
// ISO7816.OFFSET_CDATA following the 5 header
// bytes.
byte byteRead =
(byte)(apdu.setIncomingAndReceive());
// it is an error if the number of data bytes
// read does not match the number in Lc byte
if ( ( numBytes != 1 ) || (byteRead != 1) )
ISOException.throwIt(ISO7816.SW_WRONG_LENGTH);
// get the credit amount
byte creditAmount = buffer[ISO7816.OFFSET_CDATA];
// check the credit amount
if ( ( creditAmount > MAX_TRANSACTION_AMOUNT)
|| ( creditAmount < 0 ) )
ISOException.throwIt(SW_INVALID_TRANSACTION_AMOUNT);
// check the new balance
if ( (short)( balance + creditAmount) > MAX_BALANCE )
ISOException.throwIt(SW_EXCEED_MAXIMUM_BALANCE);
// credit the amount
balance = (short)(balance + creditAmount);
} // end of deposit method
private void debit(APDU apdu) {
// access authentication
if ( ! pin.isValidated() )
ISOException.throwIt(SW_PIN_VERIFICATION_REQUIRED);
byte[] buffer = apdu.getBuffer();
byte numBytes =
(byte)(buffer[ISO7816.OFFSET_LC]);
byte byteRead =
(byte)(apdu.setIncomingAndReceive());
if ( ( numBytes != 1 ) || (byteRead != 1) )
ISOException.throwIt(ISO7816.SW_WRONG_LENGTH);
// get debit amount
byte debitAmount = buffer[ISO7816.OFFSET_CDATA];
// check debit amount
if ( ( debitAmount > MAX_TRANSACTION_AMOUNT)
|| ( debitAmount < 0 ) )
ISOException.throwIt(SW_INVALID_TRANSACTION_AMOUNT);
// check the new balance
if ( (short)( balance - debitAmount ) < (short)0 )
ISOException.throwIt(SW_NEGATIVE_BALANCE);
balance = (short) (balance - debitAmount);
} // end of debit method
private void getBalance(APDU apdu) {
byte[] buffer = apdu.getBuffer();
// inform system that the applet has finished
// processing the command and the system should
// now prepare to construct a response APDU
// which contains data field
short le = apdu.setOutgoing();
if ( le < 2 )
ISOException.throwIt(ISO7816.SW_WRONG_LENGTH);
//informs the CAD the actual number of bytes
//returned
apdu.setOutgoingLength((byte)2);
// move the balance data into the APDU buffer
// starting at the offset 0
buffer[0] = (byte)(balance >> 8);
buffer[1] = (byte)(balance & 0xFF);
// send the 2-byte balance at the offset
// 0 in the apdu buffer
apdu.sendBytes((short)0, (short)2);
} // end of getBalance method
private void verify(APDU apdu) {
byte[] buffer = apdu.getBuffer();
// retrieve the PIN data for validation.
byte byteRead = (byte)(apdu.setIncomingAndReceive());
// check pin
// the PIN data is read into the APDU buffer
// at the offset ISO7816.OFFSET_CDATA
// the PIN data length = byteRead
if ( pin.check(buffer, ISO7816.OFFSET_CDATA,
byteRead) == false )
ISOException.throwIt(SW_VERIFICATION_FAILED);
} // end of validate method
} // end of class Wallet
Any help on this would highly appreciated !! :)

Hi,
Thanks a lot for reply.But I am not sure as to how can I delete the simulator.
All I want to do is write a pin on the smart card and verify it.But I am not being able to deploy the cap file or initiate the applet.
Also for passing the pin correct me if I am wrong........ according to what you said and what I have understood
If the code is like this :
public static void install(byte[] bArray, short bOffset, byte bLength) {
// create a Wallet applet instance
new Wallet(bArray, bOffset, bLength);
} // end of install method
byte aLen = bArray[bOffset]; // applet data length
// The installation parameters contain the PIN
// initialization value
pin.update(bArray, (short)(bOffset+1), aLen);
Lets say my pin is : 1234
then I would pass it here.....
new Wallet(bArray, 1234, bLength);

How to load different html files in one page in order to load them without leaving the main stage?

Hello,
I'm new with edge animate, but i fell in love with it.
I'd like to know, is it possible to load different html pages dynamically in the main stage in order to avoid the preloader to be load?
I can figure out how to save all the pages of the site, but i can't merge them in a continuous animated browsing experience.
As sample.
I've got a index.html and home.html, how to switch form index to home without having a clear division between the two pages?
I can place all the animations within a file and this will allow me to have a continuous surfing experience but it won't generate specific and google indexable pages within the site.
Example, index.html will generate www.mysite.com, home will generate www.mysite.com/home. How ho switch dinamically between them and integrate them in a unique fading experience?
Thanks in advance for any help. I'm a newby, but i would like to learn.
Fea.

Look into using the Loader class to load the swf files. If you want to have it happen in different frames then you can put the code into the different frames.

How to load a CSF file in indesign cs3 via scripting?

Hi all
How can I load a csf file into indesign from a path?. Once loaded, it is not remaining in dropdown list. Could anyone suggest on this?
Thanks
Thamil

Once loaded, it is not remaining in dropdown list. Could anyone suggest on this?
Try to place the file to the following folder: YourUserFolder\Library\Application Support\Adobe\Color\Settings
(This is for Mac)
How can I load a csf file into indesign from a path?
By script you can do this like so:
var myPath = "~/Desktop/MySettings.csf";
var myFile = new File (myPath);
if (myFile.exists) {
app.colorSettings.cmsSettingsPath = myFile;
else {
alert("File \""+ myPath + "\" can't be found.");

How to load unicode data files with fixed records lengths?

Hi!
To load unicode data files with fixed records lengths (in terms of charachters and not of bytes!) using SQL*Loader manually, I found two ways:
Alternative 1: one record per row
SQL*Loader control file example (without POSITION, since POSITION always refers to bytes!)<br>
LOAD DATA
CHARACTERSET UTF8
LENGTH SEMANTICS CHAR
INFILE unicode.dat
INTO TABLE STG_UNICODE
TRUNCATE
A CHAR(2) ,
B CHAR(6) ,
C CHAR(2) ,
D CHAR(1) ,
E CHAR(4)
) Datafile:
001111112234444
01NormalDExZWEI
02ÄÜÖßêÊûÛxöööö
03ÄÜÖßêÊûÛxöööö
04üüüüüüÖÄxµôÔµ Alternative2: variable length records
LOAD DATA
CHARACTERSET UTF8
LENGTH SEMANTICS CHAR
INFILE unicode_var.dat "VAR 4"
INTO TABLE STG_UNICODE
TRUNCATE
A CHAR(2) ,
B CHAR(6) ,
C CHAR(2) ,
D CHAR(1) ,
E CHAR(4)
) Datafile:
001501NormalDExZWEI002702ÄÜÖßêÊûÛxöööö002604üuüüüüÖÄxµôÔµ Problems
Implementing these two alternatives in OWB, I encounter the following problems:
* How to specify LENGTH SEMANTICS CHAR?
* How to suppress the POSITION definition?
* How to define a flat file with variable length and how to specify the number of bytes containing the length definition?
Or is there another way that can be implemented using OWB?
Any help is appreciated!
Thanks,
Carsten.

Hi Carsten
If you need to support the LENGTH SEMANTICS CHAR clause in an external table then one option is to use the unbound external table and capture the access parameters manually. To create an unbound external table you can skip the selection of a base file in the external table wizard. Then when the external table is edited you will get an Access Parameters tab where you can define the parameters. In 11gR2 the File to Oracle external table can also add this clause via an option.
Cheers
David

How to Load 2 library files using System.loadLibrary in one .java file!!!

Hello,
Someone please help me. What I am trying to do is load two .DLL files in my program. Program works fine when I
do the following way i.e. I have two .java files and in each I am loading one .DLL file. But I don't want to have
two .java files I want to load both the .DLL files in one program.
**************** Example.java **********
import java.io.*;
import java.util.*;
public class Example
public native int A(String in);
static
System.loadLibrary( "API2" );
public static void main( String args[])
     Ex ex = new Ex();
     int r;
     r = ex.A("TEST");
public Example()
*****************Ex.java*****************
public class exsysml
public native int A(String in);
public exsysml()
System.loadLibrary("API3");
The above way works. But I need only one .java file to load both the .DLL files. i.e.
import java.io.*;
import java.util.*;
public class Example
public native int A(String in);
static
System.loadLibrary( "API2" );
System.loadLibrary( "API3" );
public static void main( String args[])
     Example ex = new Example();
     int r;
     r = ex.A("TEST");
public Example()
but when I do this way it doesn't work and I get a UnSatisfiedLinkage Error at ex.A("TEST"). While doing the top way it works.
How can I fix this to just have one .java file and load both the library files as done in the bottom program but doing this program doesn't work. Any help is appreciated.
Thanks!

what I figured out so far is that we can only load one library file in a single class and define all the native methods present in that library in the class where we are loading it. Means we can't load multiple library files in a single class. It's just my thought else if someone provides a better solution. I may be wrong so that's why I need your help.
Thanks

How to load a XML file into a table using PL/SQL

Hi Guru,
I have a requirement, that i have to create a procedure or a package in PL/SQL to load XML file into a table.
How we can achive this.

ODI_NewUser wrote:
Hi Guru,
I have a requirement, that i have to create a procedure or a package in PL/SQL to load XML file into a table.
How we can achive this.
Not a perfectly framed question. How do you want to load the XML file? Hoping you want to parse the xml file and load it into a table you can do this.
This is the xml file
karthick% cat emp_details.xml
<?xml version="1.0"?>
<ROWSET>
<ROW>
<EMPNO>7782</EMPNO>
<ENAME>CLARK</ENAME>
<JOB>MANAGER</JOB>
<MGR>7839</MGR>
<HIREDATE>09-JUN-1981</HIREDATE>
<SAL>2450</SAL>
<COM>0</COM>
<DEPTNO>10</DEPTNO>
</ROW>
<ROW>
<EMPNO>7839</EMPNO>
<ENAME>KING</ENAME>
<JOB>PRESIDENT</JOB>
<HIREDATE>17-NOV-1981</HIREDATE>
<SAL>5000</SAL>
<COM>0</COM>
<DEPTNO>10</DEPTNO>
</ROW>
</ROWSET>
You can write a query like this.
SQL> select *
2    from xmltable
3         (
4            '/ROWSET/ROW' passing xmltype
5            (
6                 bfilename('SDAARBORDIRLOG', 'emp_details.xml')
7               , nls_charset_id('AL32UTF8')
8            )
9            columns empno    number      path 'EMPNO'
10                  , ename    varchar2(6) path 'ENAME'
11                  , job      varchar2(9) path 'JOB'
12                  , mgr      number      path 'MGR'
13                  , hiredate varchar2(20)path 'HIREDATE'
14                  , sal      number      path 'SAL'
15                  , com      number      path 'COM'
16                  , deptno   number      path 'DEPTNO'
17         );
     EMPNO ENAME JOB              MGR HIREDATE                    SAL        COM     DEPTNO
      7782 CLARK MANAGER         7839 09-JUN-1981                2450          0         10
      7839 KING   PRESIDENT            17-NOV-1981                5000          0         10
SQL>

How to load a .cap file

Similar Messages

Maybe you are looking for