How to maintain two sets of separate auto numbered tables?

Hi everyone,
Here is what I'm trying to do with FrameMaker and find impossible to do:
I have to maintain two sets of different tables each starts with number 1 inside the table. So I created two paragraph tags with 'Auto Number' checked and applied to the two different tables. But the result is not what I want: the number inside one table continues from the other one, instead of 1, 2, 3, 4, ... and 1, 2, 3, 4... It is 1, 2, 3, 4...
Am I doing anything wrong here? Must be, for it doesn not work.
Thanks for any help.

You're not doing anything wrong, just perhaps missing some of the details. FM autonumbering is a joy to work with once you've got the hang of it, and/but different from most other approaches. (and by "different", I don't just mean flexible and reliable)
Broadly speaking, I'd say you have two options:
define two styles for the numbering you use inside tables, let's say TableNumberStart and TableNumberContinue. Define autonumbering so that TableNumberStart uses <n=1> and TableNumberContinue uses <n+1>
This works because you've made the extra effort yourself.
use one style – let's say TableAnchor – to anchor each table, and another style – let's say TableNumber – for the numbering you use inside tables. Define autonumbering so that TableAnchor uses < =0>, and TableNumber uses <n+1>.
This works because you've asked FM to make the effort for you :-} TableAnchor resets the counter to zero, and TableNumber increments it as required. Note: in the definition < =0> the space before the equals sign is essential. It keeps the counter from displaying on the page.
While you're experimenting, read up on Series labels – so you can manage separate numbering for, say, tables and figures. And on Building blocks – I was so impressed the first time I managed to use numbered heading styles to reset numbering in a list …
HTH

Similar Messages

How to maintain two sets of links

We have an organization chart on our intranet that we would like to place on our Internet site as well. The different units listed on the intranet site org chart have links to the corresponding intranet page for that unit. For the Internet org chart, we would want the links to go to the corresponding Internet page for that unit.
This is easy enough to do once. We would replace the intranet link with an Internet link. However, from that point on, we would have to either maintain the intranet and the Intranet org charts in parallel or else maintain one org chart and re-do the links for the second chart every time the org chart is updated.
Is there any way to maintain two sets of links for a single org chart file, and have the intranet links be active for the PDF placed on the intranet and the Internet links be active for the PDF placed on the Internet? The URLs are not visible on the org chart; instead, the name of each unit is a link.

I think it will be a mess. Just create two copies of the file, one with internal links and one with external ones.

HT204053 The entire family has used one itunes account for years. How do we all set up separate iCloud accounts now?

The entire family has used one itunes account for years. How do we all set up separate iCloud accounts now? Or should we? 5 macbooks, 2 ipads, 4 iphones, 2 itouch, 2 imacs. How does one decide what to sync, share and what not to? Green Jeans.

You need to start by understanding the distinction between iTunes and iCloud - Apple confuse the issue by referring to 'iTunes Match' as part of iCloud. It isn't.
You don't have to have the same login (Apple ID) for iTunes and iCloud; many people don't and there's no problem about it.
Your iCloud ID gets you email, calendars, contacts, iWork documents and PhotoStream syncing between devices.
Your iTunes ID gets you the iTunes Store, the App Store for iOS, the Mac App Store for OSX,, 'iTunes in the Cloud' (downloading of purchased items to any logged-in device) and 'iTunes Match' (uploading of songs not purchased in the iTunes Store).
Your family members can easily each get their own iCloud account to keep email etc. separate - in each case they will need a different non-Apple email address (a free one from Yahoo etc. would do) to set up the ID. If they are sharing a Mac they need to be using a separate user account.
They can have their own iCloud accounts and still all sign into the same iTunes account: or they can open their own iTunes accounts using their new iCloud Apple IDs.
BUT they cannot transfer items purchased under the present iTunes ID to different iTunes IDs.

How to Maintain two different prices for same material in different qty?

Dear all,
How to maintain two different prices for same material in different batch quantities in purchase order(ie.,info record)?
(Vendor is supplying quantities in 2 different batches & also in different prices)
Expecting valuable reply.
Jeyakanthan

In a PO you can create 2 items, and each item can be maintained with a different price in the conditions.
In info record it is not possible to have different prices for the same period, except for scales.
so if you have a price of e.g. 2 USD for 1000 kg and 1,90 USD for 2000 kg then you can maintain this in scales, but you still have to have 2 items in the PO so that each one can individually find its price.
Alternative you can create contracts (as well with more than one item) to reflect the different prices and batches.

Git - maintain two branches for separate kernel26 packages?

Hi, I'm maintaining two kernel26 packages on the AUR (kernel26-ice and kernel26-rt-ice). I'm wondering whether git would be suitable for maintaining a repo for both packages.
kernel26-rt-ice is just derivative from kernel26-ice, but is currently very very left behind since the -rt patch devs haven't released since 2.6.33. This may or may not change in future, but the resulting difference between the PKGBUILDs increases my maintainance time.
Previously I just had a small script which copied the kernel26-ice files to another folder, some sed hackery to change names/configs etc. Now I'm wondering if I could set up git branches to do the same. My idea is as follows:-
1. Two branches named kernel26-ice and kernel26-rt-ice
2. Changes made in kernel26-ice (the more active one) can be cherry-picked into kernel26-rt-ice. This includes general cleaning up of PKGBUILD etc. but not the commits which involve updating variables etc.
Is this task suitable for git? Or should I just maintain separate trees and diff them every once in a while?

ngoonee wrote:
Dieter@be wrote:
yes we can!
git >> manual trees and patches
What is the benefit over manual trees/patches in this specific case? I understand primarily the source control benefit (using it myself for my thesis software development), but am unfamiliar on whether it would actually make my life easier maintaining both packages.
err there are so many things I could go into..
with git you will basically have no issues.
if you currently have no issues, don't switch. if you currently have one or more issues with your workflow, switch to git and those issues will be gone.

How to maintain two credit limits for the same customer.

We have two lines of business for the same company code. One customer is trading in two lines of business.
We want to maintain two credit limits for same customer. How is this possible.

Hi,
Credit Limits are assigned to customer master in a credit control area, so a customer can have different credit limits for the different credit control areas.
(Please note that Credit Control Areas are normally assigned to company codes or sales area.)
But if you are having only one credit control area, then only one credit limit can apply.
However you can use the user exits to put any check you want for the customer. There are various user exits available for it like LVKMPTZZ,LVKMPFZ1,LVKMPFZ2 and LVKMPFZ3 in transaction SMOD
Regards,
Gaurav

How to Maintain Two Countries for a Single Plant in OX10

Hi Experts
I need the solution for the below settings for OX10 ( Plant Overview ) .
For a single Plant i have to maintain two countries .
1) One country in details screen of Plant ( Country Key )
2) Second country in Address details of the same plants ( In the Street Address - Country )
while i am doing that the country in main screen is getting copied as same as address country after saving .
Pls Help .
Regards
Sameer
Edited by: Saxena Sameer on Oct 20, 2011 7:46 AM

It is not possible and not logical to have one plant in 2 countries.
And the 2 screens you talk about should actually have the same values, otherwise it is just inconsistent data.
The first screen was all what SAP had for a plant address before central address management was implemented with 4.0 release.
Since central address management is in use, you only need to define you address behind the envelope button and the necessary information is adopted to the first screen automatically.
Knowing this background should make you aware that these 2 address screens are not designed to be maintianed for different purposes.

How to maintain QM set up for sample size

Hello Guru's
My Scenario is as below for Quality Inspection :
u2022 If sample size is below 25 unit, even one characteristic in inspection lot is rejected, whole sample will be rejected and subsequently the lot.
u2022 If sample size is above 25 units, we follow AQL concept for the same characteristics
I have set up AQL and their severity according to sampling scheme from 25 sample size.
I am not understanding how to configure or set up data for inspection if they have sample size is less than 25.
Any idea, how to get that?
Thanjs in advance

Hi Mary--
Welcome to the Apple Discussions.
Have you followed Comcast's instructions on how to do it? They have a page with that information here. Some of the buttons and screens are slightly different, but the screen you're looking for is the "Outgoing Mail Server (SMTP)".
Since you can already get your Comcast Mail, go to the "Accounts" pane in Mail's preferences and click on "Server Settings" at the bottom right side of that pane. Set the settings just like they are set up in step 7 of Comcast's instructions.
HTH,
charlie

How to gather a set of floating point numbers from a web page form?

I am pretty new to Java and I am working on a project to apply Benfords law to find the probability of digits submitted by the user. My first step is to gather set of floating point numbers from a web page. How do I go about doing this? Any suggestion or a proper site where I can learn this stuff will be highly appreciated.

I am using NetBeans IDE 5.5.1 and for this project. I have realized that the first question was not well phrased.
I created a web project with 2 jsp files and a class file in it. When my jsp file runs I ask the user to enter a number for finding the probablility based on Benfords law.
This is what I got so far:
This is input.jsp
<h1></h1>
Please enter a number to be checked
<form action="result.jsp" method="post">
<input type="number" name="number" >
<input type="submit" value="Check number">
</form>
</body>
</html>
This is result.jsp
String number=request.getParameter("number");

How to maintain the Alert History by using OWN Tables

Hi,
In BAM defalut alert "History" table having limited number of columns.
But i want to maintain more informations about alerts so is there any other way to maintain the by using OWN alert history Table.
Thanks and Regards,
kash

No you cannot maintain your own history tble.
The only columns available are the ones displayed in the alert history data object.
Apart from this no other information will be available.
Alternatively you can create another Data object and create a look up field pointing towards the alert history label based on a particular key.
If the key matches then the data from the alert history DO will be pulled into this DO.
To this DO you can add your own columns and populate them with your own data.

Auto numbering tables

I am currently using FrameMaker 8.0 and have had a problem with the auto numbering of tables.
Can anyone tell me if it is possible to auto number tables using different chapter numbers within the one document?
I know that it is possible to do this when the chapters are seperate documents within one book.
E.g.
First page - Chapter 1
Table 1.1
Table 1.2
Next page - Chapter 2
Table 2.1
Table 2.2 etc.
For some reason when I try to do this any tables under Chapter 2 are still named Table 1.1 and Table 1.2 etc.
I have tried using a series but that still does not seem to work.
Any help would be appreciated!

Thank you both, this helped a great deal.<br /><br />However, I am still having trouble with one file in the book. It seems to be repeating the same chapter number not adding one when the style appears again.<br /><br />E.g. Page 1 has Chapter 1 (C:Chapter <n+>)<br /> Page 3 has Chapter 1 (which is meant to be Chapter 2)<br /><br />Also is there a way to continue the chapter numbers from a previous file in the book?<br /><br />E.g. File A has Chapters 1-4 in it<br /> File B has Chapters 5-8 in it<br /><br />At the moment they are restarting in each file.<br /><br />Any ideas?<br /><br />Thanks,<br />Skye

How to record two mics on separate tracks in GB?

So I've got the Mackie 820i, and two Shure sm58 mics hooked up. I'm able to record, and everything seems fine, but at the moment it's on one track. How do I set it up so that each mic records on a separate track? Thanks in advance for any help.

lazyeyelou wrote:
How do I set it up so that each mic records on a separate track?
http://www.bulletsandbones.com/GB/Tutorials.html#allaboutrecording2tracks
(Let the page FULLY load. The link to your answer is at the top of your screen)

How to use two sets of books with one responsibility

Does anyone know if it is possible to run reports in the General Ledger business area of the Oracle EUL against two or more sets of books with the same responsibility? For example, I want a regional finance manager to be able to run a Discoverer GL report for both Bolivia and Peru using their South America GL Manager responsibility. It looks like you can do that for AR using HR security profiles but I'm not sure how to do it for GL. Thanks.
Greg

Hi,
There are two types of security: business areas security which allows a user to access the folders in a BA and is controlled through Discoverer; and data security which filters the data returned in the report. The data security is usually implemented as a condition in the views mapped in the EUL, though it can be implemented as mandatory conditions in the EUL. The data security is controlled by Application system profiles.
In your case you will have conditions in the database views which only returning data for the set of books defined in the profile for the current responsibility. To bypass this security so that a responsibility can report on multiple sets of books you need to create new folders in the EUL that map onto database view or tables that do not have the data security.
Hope that helps,
Rod West

How to maintain Two Unit of Measure on One Item?

Hi Experts,
good day!
An item can be purchased either in Metric ton or Kgs. but maintain an inventory UoM in Kg only. What step do I need to consider, aside from creating a UDF.
Since, I can see only one conversion in item Master data, 1 Metric Ton = 1,000 kg... ( Purchasing UoM= Metric Ton) , What if my client wanted to purchase an item in Kg? The system can only viewed metric ton, how about the kg? Please help me on his matter... Thanks and God bless.
Regards,
Mari

Hi Mari,
In marketing document, you may select different Base Units for the item to utilizing two UoM.
You may check these threads:
Re: UOM Issue
Re: Inventory Issue
Thanks,
Gordon

How to add two sets of arraylists together into one?

Hi there
I am trying to finish my assignment for a car dealer..
welll i have got two arrays in my Dealaership Class
I did something like
ArrayList customerSoldCars;
ArrayList customerBotCars;
I was wondering if it's possible to add them together as in something like
ArrayList allCustomer = customerSoldCars + customerBotCars;
so that i can just create a method something called listAllCustomers()
which will be showing the list of both "customers who sold the their cars to the dealer" and "customers who bot the cars from the dealer"
any help would b highly appriciated..
cheerz

You can use a Set (in order to avoid duplicates.)
Then you simply add your lists' customers to the set using the addAll method.
This way, you will obtain all your customers from the two lists merged into a single collection.
Finally, if you really need a List, you can create one out of the Set.

How to maintain two sets of separate auto numbered tables?

Similar Messages

Maybe you are looking for