How to make a copy of lion on disc

bought a new mac pro with lion installed and i want to make a copy of lion so when my hard drive goes bad i can install it whith a disc.

Here you go:
OS X: About Recovery Disk Assistant
The procedure describes how to create a bootable USB flash drive, but the procedure to create a bootable DVD is similar. A DVD will take much, much longer to boot, so the USB flash drive method is preferred.
By the way, realize that you do not need to do this if your HD needs to be replaced. As long as you have a fairly fast wireless connection you need nothing else. The download itself might take one or two hours on a ± 10 Mbps connection.

Similar Messages

How to make a copy of a legal size document on HP Officejet Pro 8600

How to make a copy of a legal size doucment on HP Officejet Pro 8600 e-All-in-One?

Hi,
Please try
(a) Load legal size papers onto the input tray (you have to extent the tray from the blue/cyan part to fit legal size papers),
(b) Load original face up on the ADF,
(b) Touch copy,
(e) Touch Settings (now you can change size and few other options,
(f) Touch Black or Colors to copy.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to make a copy of an instance of a class?

Hi,
If I create a somethingk like a datagrid and filled it with data during runtime, and then I would like to display the datagrid in another place at the same time. So how to make a copy of the datagrid with the data filled?
Thanks.

Hi webvalue, do you wish to display the same data that this DataGrid is using? If so just create a new DataGrid instance and give it the same data as its dataProvider. For example the code below uses two DataGrids that both consume the same data:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
                layout="absolute"
                applicationComplete="init(event)">
    <mx:Script>
        <![CDATA[
            [Bindable]
            private var _dp        :Array;
            private function init(e:Event):void
                _dp = [
                        {label:"FlashGen.Com", data:"http://www.flashgen.com"},
                        {label:"Adobe", data:"http://www.adobe.com"},
                        {label:"Flex.org", data:"http://www.flex.org"},
        ]]>
    </mx:Script>
    <mx:Panel x="10" y="10" width="600" height="207" layout="absolute" title="Multiple DataGrids using the same data source">
        <mx:DataGrid id="dg2" dataProvider="{_dp}" left="0" top="0" bottom="0" width="50%"/>
        <mx:DataGrid id="dg1" dataProvider="{_dp}" right="0" bottom="0" width="50%" top="0"/>
    </mx:Panel>
</mx:Application>
Cloning a DataGrid component doesn't seem to be the right solution given the information you have provided. If you wanted to reuse the DataGrid in a separate view you could always reparent it to the new view by removing it from the current views displaylist and adding it to the new views displaylist like the example below illustrates, here I'm moving the DataGrid (dg) from one Panel component (dghost) to another (dghost2):
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
                layout="absolute"
                applicationComplete="init(event)">
    <mx:Script>
        <![CDATA[
            [Bindable]
            private var _dp        :Array;
            private function init(e:Event):void
                _dp = [
                        {label:"FlashGen.Com", data:"http://www.flashgen.com"},
                        {label:"Adobe", data:"http://www.adobe.com"},
                        {label:"Flex.org", data:"http://www.flex.org"},
            private function moveDataGrid(e:MouseEvent):void
                dghost.removeChild(dg);
                dghost2.addChild(dg);
        ]]>
    </mx:Script>
    <mx:Panel id="dghost" x="10" y="10" width="300" height="207" layout="absolute" title="DataGrids original parent container">
        <mx:DataGrid id="dg" dataProvider="{_dp}" right="0" bottom="0" top="0" left="0"/>
        <mx:ControlBar>
            <mx:Button label="Move DataGrid" click="moveDataGrid(event)"/>
        </mx:ControlBar>
    </mx:Panel>
    <mx:Panel id="dghost2" x="10" y="225" width="300" height="207" layout="absolute" title="DataGrids original parent container">
    </mx:Panel>
</mx:Application>
While you could clone the DataGrid, when dealing with display objects it's often easier to reparent them as you are only moving it from one view to another; this has the added benefit of saving on memory as you still only have the original instance of the DataGrid not that instance and a new "cloned" instance.
I hope that helps provide additional options beyond just cloning
regards
m
Mike Jones
FlashGen.Com
Adobe Community Expert For Flex
Adobe Certified Expert for Flex 3 & AIR
w./ www.flashgen.com
b./ blog.flashgen.com
Catch Me At
Scotch on the Rocks London '09
Flash on the Beach Brighton '09
Author Of Developing Flex Components
Addison-Wesley (Q4 / 2009)

How to make a copy of an existing BSP application

Hi Experts,
I am working on Web UI WB where i am tyring to make enhanchments as per the clients requirment. I have created new enhanchment set, however i am unable to understand how to make a copy of existing BSP application to make the required changes. Can someone let me know the procedure on how to copy the BSP and make the changes in the methods.
I am using the TCODE BSP_WD_CMPWB then the component BT108H_LEA
Thank you
Leela

Hi,
I am trying to rename LEAD with Constituent in Web ui and for that purpose i have created ZClass in Web UIWorkBench, I am able to make changes to the related Method in the Zclass where i have replaced the string with Constituent. Now when i open Webui i see Lead overview page with the description as ConstituentBPLEAD. Can some one let me know how to remove BPLead from the description. I am putting across the code that i have incorporated in the method.
method IF_BSP_WD_HISTORY_STATE_DESCR~GET_STATE_DESCRIPTION.
CALL METHOD SUPER->IF_BSP_WD_HISTORY_STATE_DESCR~GET_STATE_DESCRIPTION
EXPORTING
IV_CURRENT_DESCRIPTION = IV_CURRENT_DESCRIPTION
RECEIVING
DESCRIPTION = DESCRIPTION
Data corp_descr type string.
corp_descr = cl_wd_utilities=>get_otr_text_by_alias( 'CRM_UIU_MASTER/TITLE' ).
if description cs corp_descr.
replace corp_descr with 'Constituent' into description.
endif.
endmethod.
Thanks
Leela

How to make a copy of one company to another

hi
i want to have a backup of one company! can anyone help me how to make a copy of an existing company

Hi,
you can use the SQL backup and restore
if you use SQL 2000, open Enterprise manager, right click on the company DB that you wish to back up and choose "all tasks" -> "Backup Database"
then click "Add" and select the name of your backup
then press OK and you just made a backup of your company DB.
for duplicating DB, just create a new empty sql DB and right click on it->All tasks->select Restore database -> select from device -> clickon from device and select the backuped DB to duplicate.
go to the option tab and make sure the restore path is correct and that Force restore is marked.
hope it helps
let me know if you need more info
Moty Moshin

How do i make abackup copy of Lion with a UBS2?

I am thinking about downloading Lion, i do not have a external harddrive. So i need to make a backup copy. I have a brand new unused Kingston USB. Once i have copied the software to the USB, where do I install it from? The copy on my USB? Or the original on my desktop? If you can offer any advice on this procedure, I would be grateful because i hardly ever download, and i've never copied anything of this importance before.

When you download Lion it will put the installer in your Applications folder and present you with an 'install Lion window'. Before clicking on the install screen copy the Lion installer to the USB drive (USB drive needs to have at least 4gb of available space). Eject the USB stick and continue with the installation. Once the Lion install is finished the installer in the applications folder will disappear so you are wise to copy it first.
Edit: As a side note, from your description it sounds as though you don't have an external back-up of all the important data on your Mac. I'd really recommend getting an external and at least keep a Time Machine backup.
Legend has it that there are two types of disk drive - one that has failed and one that hasn't failed yet. Having a backup in place will save you a world of pain. I know this for a fact .

How to make a copy of DefaultStyledDocument Object for RTF text ?

Hi All,
In my application, I need to copy RTF text from Org_Default_Styled_Document to New_Default_Styled_Document (both are independent objects.)
For this I wrote the below method :
public DefaultStyledDocument copyRTFStyledDocument(DefaultStyledDocument Org_Default_Styled_Document)
          DefaultStyledDocument New_Default_Styled_Document = null;
          try
                        // writing RTF byte[] to output stream.
               ByteArrayOutputStream bOData = new ByteArrayOutputStream();
               rtfKitEditor.write(bOData, Org_Default_Styled_Document, 0, Org_Default_Styled_Document.getLength());
                        // reading RTF byte[] from input stream.
               ByteArrayInputStream bIData = new ByteArrayInputStream(bOData.toByteArray());
               New_Default_Styled_Document = new DefaultStyledDocument();
               rtfKitEditor.read(bIData, New_Default_Styled_Document, 0);
          } catch(BadLocationException e)   {
            e.printStackTrace();
          catch(IOException e)        {
            e.printStackTrace();
       return New_Default_Styled_Document;
}I am able to see an extra 'enter' character (i.e, "\n") added to New_Default_Styled_Document.
I tried to figure out the problem by digging API classes like RTFEditorKit.java and RTFGenerator.java, I observed that an extra 'enter' character is adding at the below method of RTFGenerator.java
public void writeRTFTrailer()
    throws IOException
    writeEndgroup();
    writeLineBreak();
public void writeLineBreak()
    throws IOException
    writeRawString("\n");
    afterKeyword = false;
}I used
New_Default_Styled_Document.remove(Org_Default_Styled_Document_Length, 1); to remove the extra 'enter character from New_Default_Styled_Document every time. Its workaround only.
Can any one please help me how to make a new copy / clone of DefaultStyledDocument ? Is there any alternate solution which does not add any extra character when we make a copy of DefaultStyledDocument ?
Its very urgent. I am trying a lot.
Thanks in advance
Satya.

You will need to define an Organization hierarchy.
1. Define your company as a Business Group and define the 3 child companies as Organizations (HR Organizations).
2. Define Organization Hierarchy with 3 child organizations as child of the Business Group. You can further add organizations as childs to those three in the hierarchy.
3. Define 3 security profiles (Security > Profile) marking View Employees / Contingent workers / Applications / Contacts as restricted. Click in the Organization Security tab. Select the option of Secure by Organization hierarchy option. Click in Organization hierarchy and select the one defined in step 2. Click in top Organization and select Company 1 / 2 /3 for each of the Security Profile. Check the box Include Top Organization. Also select the check box Restrict on Individual assignments option. Save the security profile(s).
4. Define 3 HR Responsibilities (e.g. Company 1 HR, Company 2 HR, Company 3 HR). Using system profile HR:Security Profile, attach corresponding security profile to each of the responsibilities. Profile value of HR: Business Group is same for all the responsibilities.
5. Run the Concurrent Program "Security List Maintenance" for each of the security profile.
From now, One responsibility can not view data from another Organization and its child Orgs.

How to make a copy of a DB and keep it updated in real time?

Hi
I have an Oracle Database 10g RAC and ASM on HP UX platform in the production environment and I need to make a copy of that database on another server where each transaction is updated online.
Could you please tell me how I can do that?
There are tools to do that?
Thanks

Dataguard is in Oracle Enterprise, or I need to buy something else ?
In wiki ( not a great source I know :P )
Data Guard supports both physical standby and logical standby sites. Oracle Corporation makes Data Guard available only as a bundled feature included within its "Enterprise Edition" of the Oracle RDBMS.[1] Edited by: Archylus on 14/04/2010 02:32 PM

How to make a copy of a query?

We can't find contex menu item to make a copy of a query when right clicking a query and can't find any picture icon/button to make it. If someone can tell us on how to do it?
Thanks

Hi Kevin,
To make a copy of the query use the "save as" option in the query designer and assign the new technical name and description.
If you want to copy the query between 2 data targets then use the transaction RSZC.
Bye
Dinesh

How to make a copy of my install disk in case original is lost/misplaced.

This is Lester,
Need advise how to make copy(s) of my install disk for a rainy day. Went to APP'S utility disk and was confused.
Advice is appreciated. Thanks to all who respond. L.

Launch Disk Utility and peruse it's help files. Fairly straight forward. If you're still confused, see Kappy's reply in http://discussions.apple.com/thread.jspa?messageID=7898689

How to make recovery disks for Lion OS.

Hello Everyone,
I had bought a MacBook Pro 13" core 2 duo last year, I am planning to upgrade the OS from Snow Leopard to Lion. The doubt that is stopping me to purchase the Lion OS from the app store is that if I install the new OS and may be in future I need to format the computer how will I take the backup of the OS. Do I need to purchase the OS again after formatting the computer.
Regards
Raghav Aggarwal

raghav_aggarwal wrote:
Do I need to purchase the OS again after formatting the computer.
No.
http://support.apple.com/kb/HT4718
how to make a bootable Lion install disc or drive

I need to know how to make a copy of my contacts from my iphone to my PC?

I cannot get my contacts to appear on my PC so I can make a copy.I am due to recive a new company phone today and I do not want to lose my contacts.I am unsure of what type phone my next one will be.But I do know that I will be with Verizon Wireless.Is there a way to get my contacts over to the new phone even though it is with Verizon.If not I need to copy them as not to lose them.i am giving my iPhone to my son and staying with AT&T as well as having my company phone.Any help will be much appreciated...
Thanks,
Tbone
4/7/10

Haven't you been regularly syncing your phone with iTunes. If so, your contacts should already be on your computer in Outlook.
If you have not done this, you will need to create a dummy contact in Outlook and then sync the phone so the two contact lists will be merged.

How to make a copy of photos taken on iPad camera?

I've only just got an iPad so forgive me if this is really basic but I want to make a copy of a photo I have taken with the camera on the iPad so I can edit one but still have the original. I've tried copy image but it doesn't seem to do anything, I'm not sure if it saves it somewhere else or it's just a copy and paste function?

What you are doing is a copy and paste function. After you copy the photo, it is placed on the iPad clipboard - which is invisible and cannot be accessed. The photo will remain in the clipboard until you copy something else which will replace the photo.
What app are you using for editing? I use PhotoPad for a little bit of editing and when I edit the photo and save it, it does not replace the original photo.

How to make a copy of an application with its schema-tables,data and all

Good day,
I am looking for the best way to make a copy of an application from one computer to another, including the schema (tables, data and all) in Apex3.2.
I can only manage to make a copy of the application without the data using the export utility
Please assist with this difficulty
Kind Regards
Thabo
Edited by: Thabo K on Jun 1, 2009 1:13 AM

Hello,
To copy across the data you can use the traditional EXP/IMP or the Datapump utility.
If you're used to using EXP/IMP I'd encourage you to look at Datapump, if you haven't used EXP/IMP before I'd encourage you to look at Datapump (datapump rocks) -
http://www.oracle-base.com/articles/10g/OracleDataPump10g.php
There are a few major differences between Datapump and traditional EXP/IMP (EXP/IMP creates the export file on the client side, Datapump creates it on the server side etc).
In my book "Pro Oracle Application Express" I have a section on cloning applications/data between instances, which you might find useful.
Hope this helps,
John.
Blog: http://jes.blogs.shellprompt.net
Work: http://www.apex-evangelists.com
Author of Pro Application Express: http://tinyurl.com/3gu7cd
REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone!

How to make a copy of a table?

I wonder how to get a copy of a table in apex.
At first I think there must be created a page process. The sql-code would be Create table "TABLE2" as select * from TABLE1. But the page process must be defined as an PL/SQL anonymous block and unfortunately my knowledge of PL/SQL is very small. Could anybody advise me which code for the anonymous block has to be taken for that?

Imagine your accounting department runs a normal bookkeeping. There are some bookings which occur month for month or quarter by quarter. The accountant mourns that he has to give in always the same data and my idea is to tell him that we will take a second table with these repeating bookings and once a month he unions this table with the master table to get the complete ledger. But we cannot use the repeat-table itself because it may differ from month to month. So we have to take a copy table for one month and next month we need a new copy. This means that we have to provide 12 tables for a year with 12 regions what is not so horrible as it sounds as we can use hide&show regions.
Michael

How to make a copy of lion on disc

Similar Messages

Maybe you are looking for