How to make a transport of ABAP Program to a QA environment

Hi forum and sorry for my easy question, but i am a newby in ABAP
How can i a transport an ABAP program to QA environment?... is the same machine only changes the mandant.
Thnks
Josue Cruz

You need have transport request for ABAP program.
Transport Request are two types :
1.customizing
2 work bench
customizing - it is related to SPRO Transaction and Functional people will create Customizing request
Work Bench Request - normally irt realeted to ABAP Develper. and all about SE38 Programs ,Data dictinary and so on..
If you want to to release transport request ,then you need to use SE10 or SE09 Transaction.
Goto SE10 and see ur transport request -.it will have sub request #
Select Sub request #->overall check -Syntax check
then Activate check
then click on release dirctly button(Looks like Bus)
activate
now select main request and click on release directly button.
check the status - by using transport logs at SE10 transaction,you need to have sy-subrc eq 0
when you get sy-subrc eq 4 then you deleted something in ur program ,sy-subrc eq 8,sy-subrc eq 12 these all status of ur transport request.
once you done then you need import to Tst Box,use STMS Transaction.
Reward Points if it is useful
Thanks
Seshu

Similar Messages

How do we call smartforms in abap program or web services

how do we call smartforms in abap program or web services
How many types of smartforms are there?
points will be rewarded

Hi
See this sample program
Using the fun module smartform is called from the program
Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Reward points for useful Answers
Regards
Anji

How to call subroutines defined in ABAP program with type S

how to call subroutines defined in ABAP program with type S? can you give an example?

Normal executable program,
REPORT ZTEST_MAIN.
perform sub1 in program ztest_sub.
"you can call using in program addition
Subroutine pool program
PROGRAM ZTEST_SUB.
form sub1.
endform.

How to call a idoc in abap program and updates catsdb table

how to call a idoc in abap program and updates catsdb table
thank you,
Jagrut BharatKumar Shukla

Hi Kishan,
You can refer to following help document,
http://help.sap.com/saphelp_nw04/helpdata/en/bf/d005244e9d1d4d92b2fe7935556b4c/content.htm
Regards,
Meera

Transport of ABAP Programs via File

Hello,
I want to transport an ABAP-Program into my training-system at home (SneakPreview 2004s).
Because there is no connection between the systems, I search for a solution via filesystem.
Thanks
Armin

Hello Armin,
The approach for downloading to a notepad maynot be very be useful The report will have includes,function modules etc... Also it will have screens which you cannot download on notepad!!
So do one thing. Include the report with all its components : includes,screens etc..in a transport request. Do it though SE80 transaction. Once done release the transport request. This will result in creation of data file and co file.
Now at OS level you can get these files and then you can copy them on CD/DVD. Put these files i the respective folders of your target system and import the transport.
If this is Z report and has a Z development class/message class I would suggest including it also in the transports. Development class/message class availability before the report import happens is a must. So include every thing in the transport and use data files and co-files.
Please award points for useful answers.
Regards.
Ruchit.

How to debug the method in abap program

How to debug the method in abap program ?
Could you please give the solution.
Thanks
sai

Hi ,
Place break point at call method .
It takes u in to the method implementation .
Here u can analyse the method implementation ...
Reward if useful
Thanks
Jagadeesh.G

HOW TO creat BAR CHART using ABAP Programming

DEAR ALL,
I want some help as to how to creat GRAPHICAL display using ABAP programing (BAR CHART) any sample codes Example will be very helpful.
Regards,
VJ

On earlier versions, you can do something like this.
[code]
REPORT ZRICH_0005 .
DATA: BEGIN OF ITAB_DATA OCCURS 0,
           DATANAME(15),
           QUANTITY1 TYPE I,
           QUANTITY2 TYPE I,
           QUANTITY3 TYPE I,
      END OF ITAB_DATA.
Data: BEGIN OF ITAB_OPTIONS OCCURS 0,
           OPTION(20),
      END OF ITAB_OPTIONS.
ITAB_DATA-DATANAME = 'Maple'.
ITAB_DATA-QUANTITY1 = 5500.
ITAB_DATA-QUANTITY2 = 6200.
ITAB_DATA-QUANTITY3 = 5900.
APPEND ITAB_DATA.
ITAB_DATA-DATANAME = 'Oak'.
ITAB_DATA-QUANTITY1 = 3500.
ITAB_DATA-QUANTITY2 = 5200.
ITAB_DATA-QUANTITY3 = 4400.
APPEND ITAB_DATA.
ITAB_DATA-DATANAME = 'Cherry'.
ITAB_DATA-QUANTITY1 = 1800.
ITAB_DATA-QUANTITY2 = 2200.
ITAB_DATA-QUANTITY3 = 1900.
APPEND ITAB_DATA.
CALL FUNCTION 'GRAPH_MATRIX_3D'
     EXPORTING
          COL1        = 'Jan'
          COL2        = 'Feb'
          COL3        = 'Mar'
          TITL        = 'Lumber Usage in $'
     TABLES
          DATA        = ITAB_DATA
          OPTS        = ITAB_OPTIONS
     EXCEPTIONS
          OTHERS      = 1.
[/code]
Regards,
Rich Heilman

How I make "dreamweaver mx 2004" default program

How I make "dreamweaver mx 2004" default program that opens
files such as .php, .htm, .asp etc ? default currently is
"dreamweaver mx" ...

In Windows.
This can be done in any Windows Explorer panel or from the
Control Panel..
Open any folder in Windows, Click Tools/Folder Options then
the File Types
tab. Find the file type you want to change and change it...
If you're using a Mac... don't know.
"lse987" <[email protected]> wrote in
message
news:eifmsi$33u$[email protected]..
> "If Windows, CONTROL PANEL, FOLDER OPTIONS,
> On the File Types tab,"
>
> this in dreamweaver mx 2004 or in .... ? Be more clear

How to transport an ABAP Program

I have an ABAP Program Z_CSFILE_SYSTEMCMD which I want to put in a transport request. Jeevan and I could not figure out how to do that.
Also this ABAP program uses two program variants:
XCS_PARM_CLEAN and XCS_PARM_PREP
If they are not automatically included with ABAP Program transport, how to transport the?
Thanks a lot,

Hi
you can transport the existing program through version management
Step 1
go to se38. give the program name Z_CSFILE_SYSTEMCMD press change.
Step 2
Change the program by introdusing space in the program(make sure the program is not effected)
Step3
after do so save the program . go to utilities on the top of the menu --- version management .
now after saving you can see Modified version there . again go back and activate the program.
Step4
after activating the program go to utilities on the top of the menu --- version management .
now you can see the the active version of the program and below that you can see the versions (eg version 1, 2 , 3 and so on with the request been genrated next to it)
Step 5
Copy the request for example BD1K900578
Step6
go to SE09 create a request (F6) give the name of the request name (create a work bench request)
Step7
once the a new request created.
go to SE09 and and give the user name and display. you will get a new screen where no objects are added.
Step8
Place the curser on the new request name -> include CNTRL+F11->Paste the request name BD1K900578 (Object list from the request) and press enter.
Step9
Refresh it now you can find program Z_CSFILE_SYSTEMCMD included in the request.
Step10
Relese the request and import the same to Quality.
Follow the same procedure for the rest of the varients XCS_PARM_CLEAN and XCS_PARM_PREP or varients can be created in their respective Servers
hope this helps
santosh
Edited by: Santhosh Nagaraj on Oct 29, 2009 12:41 AM

How to transport a ABAP program to Test and Production?

I created a ABAP program and used in a Process chain. I did transport to Testing system. I got an error message that program didn't not find when I was trying to run that Process Chain.
How can collect the Program and transport it again? Thanks!

steps required.
1) find the name of the program
2) collect it in the transport request.
1)go to the process chains maintaincne and right click on the abap process > to the maintaince screen and note down the name of the program
2) go to se37 type in the program name > display > menu > goto > object directory entry.
3) go to se10 > request and check the attributes of the object >
r3tr-fugr- ( package name ) > select the request and release it.
Regards,
BWer

Transport for ABAP Program

Hello,
Can anyone tell me how I can create a transport for and ABAP Program. It is currently in DEV but needs to go to test.
Thanks

I think you must have created this object as a Local Object. You need to do 2 things here :
Reassign the Development Class to a Z Dev Class.
Use trx code SE38. On the first screen, specify the program name & click on Goto-->Object Directory Entry.
You will get a popup here, change the Dev Class to whatever you have on your side, this will prompt you for a Workbench Transport request. Follow up with Basis to get it to Test.

How to create a job thru ABAP program for calling a program with variant???

Hello experts,
can u give me step wise procedure to create jobs for a program with a variant name thru ABAP???
Also, can a transaction can be scheduled as a job to run in background with a variant name???
Edited by: SAP USER on Jul 22, 2008 6:08 AM

Hi,
To create a job through ABAP program you can do the following.
Go to Menu bar.
In there, go to SYTSTEM> SERVICES> JOBS--> DEFINE JOB.
Then give the JOB NAME and CLASS in the screen that comes up.
This is how we schedule a program.
Now, to create a variant for a program -
First activate your program in SE38. Then execute it .
Now, click on SAVE button. It will open up the variant creation screen. Give the details there like variant name and value for the fields. Save and come back.
Hope this helps.
Regards,
Hari Kiran

Error in Transport of ABAP Program in Process Chain

Hi All,
I am trying to transport a process chain that contains ABAP programs.
I have transported the programs along with the other process chain variants
There is an error that occurs when I transport - "Errors occurred during post-handling RS_AFTER_IMPORT for EVEN L"
The Process chain in the target system is fine except that I am not able to see the ABAP programs in the process chain.
I am not able to locate the error.
Your help will be appreciated
Thanks,
Shruti

If a Process Variant (in this case; 'ABAP Program with success/failed' ) does not exist in the succeeding systems, it is very likely that this Process Variant has been created as a customized variant by a user. Unless the user transports this variant to further systems, this variant cannot be used in the process chain.
Therefore it is better to use general Process Variants (those delivered by SAP) in the process chains. The General Variant here can be 'ABAP Program'.
- Shruti Kulkarni

How to call transaction in an abap program

how do we open a transaction thru an abap program and pass a parameter to it

Use call transaction. You can fill up the parameters in the BDC internal table
DATA: bdc_tab LIKE bdcdata OCCURS 0 WITH HEADER LINE.
DATA: messtab LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE.
CONSTANTS: c_tcode LIKE t130m-tcode VALUE 'FB01'. "Tcode you want to call
 CALL TRANSACTION c_tcode
 USING bdc_tab
 MODE 'N'
 UPDATE 'S'
 MESSAGES INTO messtab.
Error message will be captured in the messtab.
You can goto the SAP help on Call transaction to see all the details and options.
<REMOVED BY MODERATOR>
Thanks.
Message was edited by:
 Alvaro Tejada Galindo

How to execute Infopackage with an ABAP program

Dear All,
I would like to execute an infopackage every 6th day of the month.
Therefore I would like to integrate a program in a process chain executed on a daily basis, and call with this program the execution of the infopackage if day = 6.
Do you know how to execute an infopackage inside an ABAP program ? Which function module use ?
Thanks,
Greg

Hello luminy13,
Just to answer your question on how to start an InfoPackage inside an ABAP program: you can use function module BAPI_IPAK_START. You might also need to use FM BAPI_IPAK_CHANGE to change the scheduling.
However, if the only reason you are creating the ABAP program is to run the InfoPackage at the 6th day of the month, then I don't recommend that you create the ABAP program at all. You can simply schedule the InfoPackage (or the process chain that contains it) on the 6th day of the month. Here's how to do it:
In the scheduling dialog, click the ">>" button. Enter the factory calendar, put 6 is in the workday and then choose "beginning of the month".
Hope this helps.

How to make a transport of ABAP Program to a QA environment

Similar Messages

Maybe you are looking for