How to make default tab selection

Hi,
We are using EP 6.0 with sp2 and patch level 39, out EP has data distrubuted over many tabs however, depending upon the portal logged in user, one particular tab has to be selected by default, please let me know how can I achieve this.
Thanks

Hi Swetha,
Below link tells you the whole story and how to achieve navigation as per requirements.
http://help.sap.com/saphelp_nw04s/helpdata/en/92/3e703e632c7937e10000000a114084/frameset.htm
This thread can also do teh value addition
Tab Order
Regards,
Vishal
PS: Reward points for helpful answer.

Similar Messages

How to make default values in selection field?

hi,
      i have selection field date , using data element 'QENTST' using following code in view INIT Method. i get the input selection field when i test application.
DATA: LT_RANGE_TABLE TYPE REF TO DATA.
CALL METHOD WD_THIS->M_HANDLER->CREATE_RANGE_TABLE
EXPORTING
    I_TYPENAME                     =     'QENTST'
RECEIVING
    RT_RANGE_TABLE           =     LT_RANGE_TABLE.
CALL METHOD WD_THIS->M_HANDLER->ADD_SELECTION_FIELD
EXPORTING
    I_ID                                     = 'QENTST'
    IT_RESULT                         = LT_RANGE_TABLE
    I_OBLIGATORY                 = ABAP_TRUE.
What i need now , to make default value in this selection field( low = sy-datum and high = sy-datum + 10 ) . I have checked , i found one method called... SET_RANGE_TABLE_OF_SEL_FIELD. Bt i m not able to understand how to assign values to input table parameter in this method?
Thanks In Advance.
Saurin Shah

Hi,
Refer this Article by Thomas on how to make default values in Select Options:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60474842-91ca-2b10-3390-d2fd30f335fd
I hope it would solve your problem.

How to make Default ALV layout

Hi,
I want to make 'STANDARD view' as a default ALV Layout...If anybody execute my ALV Report STARD Layout variant should display by default. Other variant layouts they can select from drill down..
I know class and method but i don't know how to write code for this with paremeters..Can anybody help on code please..
CLASS : CL_SALV_WD_C_TABLE
METHOD : IF_SALV_WD_COMP_TABLE_PERS~SET_STANDARD_VIEW
My current ALV CODE
DATA: l_ref_interfacecontroller TYPE REF TO iwci_salv_wd_table .
DATA: l_value TYPE REF TO cl_salv_wd_config_table.
l_ref_interfacecontroller = wd_this->wd_cpifc_alv( ).
l_value = l_ref_interfacecontroller->get_model( ).
Thanks.,
Subba

Hi sarbjeet singh,
Thanks for your reply...
I didn't understand your answer...Already this view gone to production system and every USER created his own view..
Now how can make default standard view to all users..
If i keep Standard view as Intial view and release transport to production is it effected to all users and display standard view as initial view?
Thanks,
Subba

How to make a JPanel selectable

When extending a JPanel and overriding the paintComponent() method the custom JPanel can not be selected so that it gets for example KeyEvents.
But if I make the new Class extend a JButton it gets of course selected and able to receive for example KeyEvents.
My question is therefore; what does the JButton implement that a JPanel doesn’t so that a JButton gets selectable? Or in other words; how to make a JPanel selectable?
Aleksander.

Try this extended code. Only the first panel added can get the Focus.
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
class Test extends JFrame
public Test()
    setLocation(400,300);
    setDefaultCloseOperation(EXIT_ON_CLOSE);
    JPanel panel1 = new JPanel(new BorderLayout());
    JPanel panel2 = new JPanel(new BorderLayout());
    ImagePanel imgPanel = new ImagePanel();
    panel1.setFocusable(true);
    panel2.setFocusable(true);
    panel1.setPreferredSize(new Dimension(0, 50));
    panel2.setPreferredSize(new Dimension(0, 50));
    panel1.setBorder(BorderFactory.createLineBorder(Color.RED,     4));
    panel2.setBorder(BorderFactory.createLineBorder(Color.CYAN,    4));
    imgPanel.setBorder(BorderFactory.createLineBorder(Color.BLACK, 4));
    panel1.add(new JLabel("Panel 1"), BorderLayout.CENTER);
    panel2.add(new JLabel("Panel 2"), BorderLayout.CENTER);
    getContentPane().add(panel1, BorderLayout.NORTH);
    getContentPane().add(panel2, BorderLayout.SOUTH);
    getContentPane().add(imgPanel, BorderLayout.CENTER);
    pack();
    panel1.addKeyListener(new KeyAdapter(){
        public void keyPressed(KeyEvent ke){
            System.out.println("Panel1");}});
    panel2.addKeyListener(new KeyAdapter(){
        public void keyPressed(KeyEvent ke){
            System.out.println("Panel2");}});
public static void main(String[] args){new Test().setVisible(true);}
class ImagePanel extends JPanel
Image img;
public ImagePanel()
    setFocusable(true);
    setPreferredSize(new Dimension(400,300));
    try{img = javax.imageio.ImageIO.read(new java.net.URL(getClass().getResource("Test.gif"), "Test.gif"));}
    catch(Exception e){/*handled in paintComponent()*/}
    addKeyListener(new KeyAdapter(){
      public void keyPressed(KeyEvent ke){
        System.out.println("ImagePanel");}});
public void paintComponent(Graphics g)
    if(img != null)
      g.drawImage(img, 0,0,this.getWidth(),this.getHeight(),this);
    else
      g.drawString("This space for rent",50,50);
}

How to make users to select the date from calendar control my making the date field read only in date time control in external list in sharepoint 2010

How to make users to select the date from calendar control only, by my making the date text field read only (don't want to let users type the date) in date time control in external list in sharepoint 2010. I am looking for a solution which can
be done through sharepoint desginer / out of the box.
thanks.

Congratulate you got the solution by yourself. I am new to a
WinForms calendar component, I feel so helpless on many problems even I'd read many tutorials. This question on the
calendar date selection did me a great favor. Cheers.

How to make Label in selection screen?

Hi friends.. can anybody explain how to make labels in selection screens and how to split the selection screen vertically? plz.. Thanks in advance

Arun kumar,
Check this program. you can put labels like this.
REPORT ZVENKAT_TEST1.
SELECTION-SCREEN BEGIN OF BLOCK block.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(15) text1.
SELECTION-SCREEN POSITION 17.
PARAMETERS :p_pernr type pa0001-pernr.
SELECTION-SCREEN POSITION 26.
SELECTION-SCREEN COMMENT 27(30) text2.
SELECTION-SCREEN end OF LINE.
SELECTION-SCREEN end OF BLOCK block .
at SELECTION-SCREEN OUTPUT.
text1 = 'Personal number'.
SELECT SINGLE ename FROM pa0001 INTO text2 WHERE pernr = p_pernr.
Regards,
Venkat.O

In the Date Picker, How can I default to select * dates if the user does ..

In the Date Picker, How can I default to select * dates if the user does not select a date.
Thanks,
Doug

Doug,
Now lets say l want everythingCould you post some sample data and the output that you want to get..? It would be much easy to understand the requirements...
When you mean everything, I am assuming you need all possible dates possible between date1 and date2.
you can use... (from asktom.oracle.com).
1 select to_date('12-jan-2009','DD-MON-YYYY') + rownum -1
2    from ALL_OBJECTS
3    where rownum <= (to_date('20-jan-2009','dd-mon-yyyy') -
4*                     to_date('12-jan-2009','DD-MON-YYYY') +1 )
sql> /
TO_DATE('
12-JAN-09
13-JAN-09
14-JAN-09
15-JAN-09
16-JAN-09
17-JAN-09
18-JAN-09
19-JAN-09
20-JAN-09
9 rows selected.
For your case, since you have date1 and date2...
select to_date(:p12_date1,'DD-MON-YYYY') + rownum -1
from ALL_OBJECTS
where rownum <= (to_date(:p12_date2,'dd-mon-yyyy') -
                    to_date(:p12_date1,'DD-MON-YYYY') +1 )Should work.. in my opinion...Haven't tested the second one in Apex .
Is this what you were looking for ..?? If not, please elaborate...
Thanks,
Rajesh.

How to make Default the Higher-Level Manager of the employee

Dear experts,
how to make Default the Higher-Level Manager of the employee as Further Participant in performance management ?
Regards,
TVS

Hi,
The delivered BAdI below defaults in both the appraiser and appraisee as part-appraisers//Default Further Participants.
BAdI Area: Appraisal Enhancements
BAdI Definition: HRHAP00_DOC_DEF_DO (Appraisal - Default Further Participants)
App. Enhn.: DEFAULT_ALL_MANAGERS
Implementation: HRTMC_DEF_OTHERS
Implementation short text: Determine All Managers
Implement this BADI in SE18/SE19 and write the desired code in the BADI methods
Hope this will help u out.....
Regards
Lakhan

How to make my tab page shows all my applications?

How to make my tab page shows all my applications?Please help me as fast as possible. Thx .
Note: Please write as detail as possible because I am new to vb.Thx again.

Hi,
For a lack of info about what Applications you are talking about we can only guess at what you want to do. In my experience, this is the kind of question that ends up being a mile long with 15 different examples because nobody knows exactly what you
are trying to do.
With that said, maybe you can put a ListView in your TabPage and use the code i showed in the link below. If not then please explain exactly what you want to do. 8)
How to make a screen that displays 'all apps'?
If you say it can`t be done then i`ll try it

How to make default Currency depending upon plant in table entries

Hi,,
How to make default Currency depending upon plant in table entries?
I am making entries in SM30.
I have the following fields in z table.
plaant , material,month.year,PFvalue,Currency.
Can some body throw light for this issue,please?\
I am familiar with modification-events.
With Regards,
Jaheer

Hi,
In PBO, within a LOOP, table control is filled via a Structure/Work Area.
In that module, code as follows,
LOOP AT SCREEN.
    IF WA-FIELD1 = C_1 AND SCREEN-GROUP1 = C_G1.
      SCREEN-INPUT = 0.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
Here, WA is a strcture & FIELD1 is its field, like that...
I already did this.
Check it out & Reply.
Yours,
R.Nagarajan
We can

How to make default selected "Set to Null" option in Prompt screen?

Hi,
     I have created Report using Bex Query. It has around 20 Optional variables.
    In the Prompt screen for Optional variables it is showing "Set to Null" Check box.
     I want to make this Check box selected by default when we preview. Kindly help me to make this option.
     Thanks for your support in advance.
Thanks & Regards,
Shiva

Hi.
If you mean on how to set default to date between dashboard prompt there is a Default to part in the prompt.
Example - SQL Results:
SELECT min(TIMES.TIME_ID) FROM "Presentation folder"
SELECT max(TIMES.TIME_ID) FROM "Presentation folder"
Or you can add repository variable as default for each date (from and to), etc.
Regards
Goran
http://108obiee.blogspot.com

How to make default profit center no in MM Master

Hi Experts,
I want to make profit center in mmaterial master costing one tab. how can i fix this.
For example
I have profit center 9999, i want fix default for all material master in Costing1 tab profitcenter field.
Guid on this

Hi Anil,
Just use tcode MM02. Enter the material number you want to enter profit center. When you enter after inserting material number it list you difference veiw/tabs, select COSTING1 tab and enter, system will ask to you to enter the plant. Give plant where this material has been created.
If you want to maintain mass change then goto MM17.

Can't figure out how to make "sub-tabs" / Too many "top-tabs" / Other ?

First of all, the website that I am webmaster for is: www.cindydennis.org .
I am having some problems:
1) There are TOO MANY tabs at the top. I can't figure out how to make sub-headings on one page...
For example, I'd like on the "About CDM" page, tabs that can be clicked on to go to other information tabs, but that don't end up appearing on the top (e.g.: having "Remarks" and "What We Believe" tabs go there, but not appear at the top).
Another example, if you look at the home screen, I'd like to have the link to the "Privacy Policy" and Terms of Service" pages on the bottom, but not have them appear as tabs in the top, too.
How do I do this, please? I've searched, and can't figure out/___sbsstatic___/migration-images/migration-img-not-avail.png
2) How do I add "Copyright 2011" automatically? I saw in the Rapidweaver trial version, it automatically adds it when you publish... is there a way to tell this program to do this? Or do I need to type that in on each page? (I don't want to purchase RW... I'm not ready for that yet.)
Thank you in advance
Cindee

Cindee ~ One way to do the copyright notice is to use a Text Clipping — Select (highlight) the copyright text you want to use and drag it to the Desktop. If necessary, change the name of the Clipping icon so that it's more easily identifiable on the Desktop. Then, when you need it in iWeb, simply drag the Clipping icon from the Desktop to iWeb's main canvas.
By the way, rather than posting your URL here like this:
www.cindydennis.org
...include the prefix to make it conveniently clickable:
http://www.cindydennis.org

How to make a dynamic selection screen

Hi
I have been searching the SDN for long time, but couldn't find the answer, so therefor a new post.
I have an internal table with following values:
VBKD-BSARK_E
TVKO-VKORG
By these values I would like to make a new selection-screen whith following:
Parameters: FIELD1 like VBKD-BSARK_E.
Parameters: FIELD2 like TVKO-VKORG.
Next time the internal table can contain
MARA-MATNR
TVKO-VKORG
VBAK-BSTZD
And the parameters should then be:
Parameters: FIELD1 like MARA-MATNR.
Parameters: FIELD2 like TVKO-VKORG.
Parameters: FIELD3 like VBAK-BSTZD.
How do I do that -any suggestions?

Hi,
This piece of code will design selection screen based on radio button selection:
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001 .
    SELECT-OPTIONS : s_date FOR pnpbegps DEFAULT sy-datum .
    SELECTION-SCREEN: END OF BLOCK b1.
    SELECTION-SCREEN : BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
    PARAMETERS:rb1 RADIOBUTTON GROUP rbf DEFAULT 'X'.
    PARAMETERS:rb2 RADIOBUTTON GROUP rbf .
    SELECTION-SCREEN: END OF BLOCK b2.
    SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003 .
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 1(25) text-006 FOR FIELD px_pdf.
    PARAMETERS: px_pdf AS CHECKBOX USER-COMMAND xxx .
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 1(15) text-004 FOR FIELD rb_app.
    PARAMETERS:rb_app RADIOBUTTON GROUP gbf DEFAULT 'X' USER-COMMAND uc01.
    PARAMETERS: p_file(128) MODIF ID 001.           " application server
    SELECTION-SCREEN END OF LINE.
Thanks,
Krishna..

How to make default personalization options for users

Hi all,
How can I make default personalization options for users, so that those will the default options when the user opens the portal BSP applications. Those will be the standard, at later point of time if they want they can personlalize some other fields, but earlier fields will be the default fields and user cant be able to change them.
Thanks
Murthy

Hi Murthy,
If you use IMG (crmc_blueprint_c) to customize PCUI appl than you can use the personalization feature. If you select 'Not in List' in the IMG for the field in the fieldgroup structure, than this field by default will not be viewable in the List View and will not be checked as 'Visible' in the Personilzation link. So by not selecting 'Not in List' you are giving that field to be viewable and all other fields are available for users to personalize by default.
If you have maintained the 'List View' using the CRM Designer, than most likely you would lose the above feature, as SAP Standard code considers the CRM Designer as high level of customization.
Thanks
Harsh

How to make default tab selection

Similar Messages

Maybe you are looking for