How to make the matrix report in OBIEE

Hi Friends,
I had a requirement today to make the report which looks like Matrix.
For example
a= 5
b=5
a(Original)=5
b(original)=5
a(Yesterday)=4
b(Yesterday)=4
a(Last Week) =3
b(Last Week) =3.I need to to show like this
(original) (Yesterday) (Lastweek)
a 5 4 3
b 5 4 3
Please help me friends.

hi,
i couldnt understand you data exactly, but you can use pivot option i think.

Similar Messages

How to do the matrix report in dis.plus?

hi
How to develop the matrix report in Dis.Plus.
Regadrs
Manikandan

Consider this thread dead. Thread with all answers is found with the same title just about at the same time.

How to make Group Matrix Report in BI Publisher Template Builder for Word

Dear All
I have created a template in MSWord's BI Publisher for creating Matrix report, it is working fine, but i couldn't do it for Group matrix report. Kindly give me any kind of example regarding group matrix or nested group in column level and row level.
Regards
Haq Nawaz
A.F.Ferguson & Co
Edited by: 823804 on Dec 28, 2010 5:42 PM

Hey hi,
I m also trying to create template for matrix wih group. have you found any solution for this? if yes please forward me the information on my mail id [email protected]

How to do the ALV report output in groups and caluculate the tOTALS(URGENT

Hi
In my ALV report output .I have to group the output based on the DAYS field
0-10 days in one group
10-30 days in one group
above 30 days one group
There is also a field by name "AMOUNT" in my output.
I have to calculate SUBTOTALs at the end of every group and at the end of the report i should caluculate GRAND TOTAL.
Please remember that i should not use any any BLOCKED ALVs and for Totals i should not use the SYMBOLS provided in the application toolbar of the report
Thanks in Advance

Please don't repost your questions...
Check out my answer in your other post.
How to make the ALV report in groups and caluculate the TOTALS
Regards,
Naimesh Patel

How to export the dashboard reports for Excel in OBIEE 11.1.1.6.0?

Hi Experts,
How to export the dashboard reports for Excel in OBIEE 11.1.1.6.0?
For example:
Dashboard contains more than one report, and add one export button for downloading these reports for Excel.
Is it possible to implement this requirement?Thanks.

There is no direct option, you can try the following workaround.
Page Option -> Print -> Printable Html
Then File -> Save Page as
Choos Save as type as -> All files
File name as Report.xls
When you Open the xls file, if you get a pop up saying problem during load just omit it and proceed.
The report will open in excel.
Or save the page as html /mht and open it with Excel, this also will work.
Note: I have tested this in Mozilla
Thanks,
Vino

How to create a matrix report on Apex 4.1

Hi all.
I need to create a report similar to this one:
Jan Feb Mar .....
Product Category
Category One 999 999 999
Category Two 999 999 999
On a reporting tool like Oracle Reports, this is call a matrix report which can be easily created: just one simple query , select a matrix report type, compute summary values for row /column and grand total, and that is.
How would one implement this on Apex 4.1???
Have a couple of ideas:
- Populate temporary table with columns corresponding to month.
- Create a procedure that return a collection and use that as a source for report.
- Etc.
What other options do i have ...?
Thanks in advance ...!

Hi all,
I did create a matrix report using the pivot function and some interesting settings in APEX. So far it is only does display data. I did not find a way yet(?) to alter the data in the same matrix.
The data is based on a simple set of tables about planning. The end result does look something like the matrix below. Note: the dashes are just there to make the matrix look like a matrix on this forum.
Resource 13-08 20-08 27-08 03-09 10-09 17-09 24-09
Angelo-----25-----22-----12-----10------------------------
John---------8-----22-----36-----22------------------------
Marit-----------------5-----40-----36-----24-----12-----10
The resources (Angelo, John and Marit) are being registered in the following table:
CREATE TABLE EVP_RESOURCES
RSS_ID NUMBER(10,0) NOT NULL,
NAME VARCHAR2(25 BYTE) NOT NULL
The date periods (13-08 till 24-09) are being registered in the next table:
CREATE TABLE EVP_DATA_POINTS
DPT_ID NUMBER(10,0) NOT NULL,
DATA_POINT_DATE DATE NOT NULL,
V_DATA_POINT_DATE_FORMATED VARCHAR2(75 BYTE) GENERATED ALWAYS AS (TO_CHAR("DATA_POINT_DATE",'dd-mm')) VIRTUAL VISIBLE
The virtual column (v_data_point_date_formated) is not needed. You can use this virtual column or format the column in multiple places.
The available units are being registered in the intersection table below:
CREATE TABLE EVP_RESOURCE_PLANNING
RPG_ID NUMBER(10,0) NOT NULL,
DPT_ID NUMBER(10,0) NOT NULL,
RSS_ID NUMBER(10,0) NOT NULL,
UNITS NUMBER(10,0)
The data is being displayed in APEX in a report region of type "SQL Query (PL/SQL function body returning SQL query)". And the following option has to be switched on "Use Generic Column Names (parse query at runtime only)".
This does give a restriction on the number of columns which can be used. You can however change the number of columns in the field "Maximum number of generic report columns:" to a high number. So in most cases this is no issue at all.
In the Region Source I did put the following code:
begin
return 'select *
from ( select rss.name "Resource"
, v_data_point_date_formated
, rpg.units
from evp_resources rss
, evp_data_points dpt
, evp_resource_planning rpg
where rpg.dpt_id = dpt.dpt_id
and rpg.rss_id = rss.rss_id
pivot (sum(units) for v_data_point_date_formated in (' ||
evp_pkg_dpm.f_dynamic_pivot_in ||
order by 1';
end;
The function evp_pkg_dpm.f_dynamic_pivot_in does return a string which is based on the number of rows in the table evp_data_points. In my case this string is: '13-08' as "13-08",'20-08' as "20-08",'27-08' as "27-08",'03-09' as "03-09",'10-09' as "10-09",'17-09' as "17-09",'24-09' as "24-09". If you ommit the 'as "..."' you do get quotes in your headings.
Enjoy and regards,
Jurgen
PS: let me know if something is missing or not clear!
Edited by: user553427 on Aug 17, 2012 5:46 AM (Query has been made more simple and I build up the header differently)

How to create a matrix report

Hi all,
i want to create a matrix report manually by writing the query how can i create it in reports builder 10g
please give me the details steps or any documentations for this so can i easily create the matrix report and also design
for the matrix report. Please give me specific examples for creating the matrix report.
plz give me the detail steps.
please reply.......

Have a look at this http://download.oracle.com/docs/cd/E12839_01/bi.1111/b32122/orbr_matrix.htm#g1017642
-Ammad

How to Enhance the Standard Report?

Hi All,
How to Enhance the Standard Report? :
When I am trying to execute the query called ZTIMES in the user group SQ01 it is navigating the screen to selection-screen with some inputs to be given here on the selection screen company code is mandatory as an input. The company code field is having the search help and it is fetching the values for the company code from table called PROJ Table (Project definition Table).But I want the company code should fetch the value from the PRPS Table ( Work break structure(WBS Element) Level).
Tables used are PROJ and PRPS.
The company code in PROJ is PROJ-VBUKR
In PRPS is PRPS-PBUKR
In the coding part related to that selection screen I have to replace PROJ-VBUKR with
PRPS-PBUKR.But it is standard report to enhance.
What is suggestible solution for this issue?
Thanks,
M Raju

Hi,
Since this is an ABAP Query, You can change the infoset query in SQ02 and establish the join linkages between PROJ and PRPS
Also on the selection screen of the Query make sure you provide company code from PRPS table and report output also from the same table reference.
Once you have modified the ABAP Query, activate and generate it so that it will internally regenerate the a standard program.
http://help.sap.com/erp2005_ehp_02/helpdata/en/d2/cb4256455611d189710000e8322d00/frameset.htm
ABAP Query (Sq01)Modification
Hope this helps
Regards,
Shiva

How to make the vendor column have figure in GRIR line item with RE document type?

Dear Experts,
Could you tell me how to make the vendor column have figure in GRIR line item whose document type is RE?
Thanks!
Xinling Zhang

Hi ,
You are using FAGLL03 .
FAGLL03 report vendor code is blank
vendor number in new FAGLL03 tcode (offsetting account information)
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30b96fed-eb5d-2e10-1792-f3ff9f65df8a?QuickLink=index&…
Also check OSS note
Note 112312 - Line item: Display of offsetting a/c information
Note 1034354 - FAGLL03: Display of offsetting account information
Many Thanks

How to make the status of a sales order complete of which PART DELIVERY

How to make the status of a sales order complete of which PARTIAL DELIVERY has already done. <b>(Assigning rejection status not accepted)</b>

Hi Gyana
There is no document with me. But I can confidently say that because I am using this functionality.
In my case I have created a Order Reason as "Short Closed". once you short close this order only the balance quantity gets rejected (provided you have already made previous delivery and PGI).
Try it in one of your test clients if you have. Once it is short Closed it wont also show in the orders due for processing in Production.
Also you can generate reports based on this if your customer wants to know how many order he has short closed, qty of item short closed etc.
Try it.
Rgds
Sunil

How to make the location of an iPhone that was stolen?

how to make the location of an iPhone that was stolen?

If you installed the app Allan is referring to, go to www.me.com on your computer.
Reporting a lost or stolen Apple product

How to make the calculation or formula in bottom of the coloum

How to make the calculation or formula in bottom of the coloum in Discoverer report.
Regadrs
Manikandan

Hi Ros
You have a couple of issues, one that is simple to resolve and one that is not so simple.
First, the simple one - the word TOTAL. To alter the word that Discoverer inserts next to a total, or to even remove the word altogether, use this workflow:
1. Right-click on the total and from the pop-up menu select Edit Total
2. At the bottom right-hand corner of the Edit Total dialog box is the area where the label is maintained. You will see a checkbox for the label
3. If you uncheck the label you can change the label to anything you like, including nothing
4. After you have set the label, click OK and close the Edit Total dialog box
Note: In Desktop, this is done via a drop-down from the Total dialog box. If you click the drop-down, the last item in the list is called Generate Label Automatically. If you uncheck this you can create your own label.
Your second issue concerning the non-totaling of the grand total on some items means that there is something preventing one or more of the totals from calculating. First of all, try to determine which item or items is causing the problem by adding individual totals to each of the desired columns. You will eventually find the column which has the culprit. If you use the above workflow to suppress the display of any labels your total line will look as though you have totaled all items.
Next, having found the column that will not total, try to figure out why the values will not add up. Could the column be a calculated item? If so, it is possible that you have used SUM on the outside of the calculation, like this:
SUM(some item - some other item) - this will not total if the original items themselves are in the query and are also being summed. This is because you are mixing aggregate and detail items within the total.
Try changing the formula like this:
SUM(some item) - SUM(some other item) and see if this helps.
If this is not the cause then try changing the formula for that column's total to CELL SUM instead of SUM. This causes Discoverer to literally add the values in the column.
If this is not the cause, could you possibly be trying to total repeated values? By default, this is disabled in the later versions of Discoverer. The repeated values will be caused if you have multiple joins in your query and the item that you are totaling is from the many end of a one to many relationship. Suppose you had items from a header table and line table in the same worksheet with there being multiple lines for the same header, and now let's say you have a column which is returning something from the header. That value will get repeated and if you try to total it would generate the wrong answer, hence out of the box Discoverer is trying to protect you from yourself.
However, it could be that the column really should be totaled but because Discoverer has detected a one to many join it will not total that column. To prove that this is the reason, change the join from a one to many to a one to one. Don't worry, this won't stop the query from working. If this allows the total to work then you can either leave the join as it is with a one to one, which won't harm Discoverer or you can edit the pref.txt on the server and change one of the preferences.
The preference I would change is called AllowAggregationOverRepeatedValues. By default this is disabled and will be set to 0. Changing this to a 1 will now tell Discoverer that repeated values can now be totaled. Don't forget to apply the preferences correctly by execiting applypreferences.bat, on Windows or applypreferences.sh, in Linux or Unix, and then stopping and restarting the Discoverer server.
I hope this helps
Best wishes
Michael Armstrong-Smith
URL: http://learndiscoverer.com
Blog: http://learndiscoverer.blogspot.com

How to make the row as a hyperlink in Crystal 2008

Hi,
Could you give me advise on how to make the row as a hyperlink and call another report.
Thank you in advance.
Rose

Hi Sastry,
I was able to create the subreport and its working.
Thank you so much.
Regards.
Rose

Can I make the summary report tabulate multiple sheets placed within the "view responses" area?

Can I make the summary report tabulate multiple sheets placed within the "view responses" area?

Hmmm...I thought this tool was going to be a good replacement for Survey Monkey. I was wrong. I definitely need a way to tabulate responses from multiple surveys so that I can roll them up by region or state or district. Do you have any suggestions of how I could accomplish this in AFC?

How to make the label UI Element as mantatory?

please help me how to make the inputfield for the label (say id) as mantatory one?
Thanks in advance

Hi Alagappan ,
To make any field mantatory you have do coding requiered for input check.
For user visibility you can make a field required by changing the state of your UI element to required.
In normal Input Fields the asterisk will come on the left of the input field,
It will be basically on the right hand side of the label having label for property bound to the input field.
It will be like
Name * = |''''''''''''''''''''''''''''''''|
But that is just for visibility purpose.
To make it mandatory you need to do some coding during the save or validate or final action on the screen
like :-
data lo_nd_employee type ref to if_wd_context_node.
data lo_el_employee type ref to if_wd_context_element.
data ls_employee type wd_this->element_employee.
data lv_pernr like ls_employee-pernr.
navigate from <CONTEXT> to <EMPLOYEE> via lead selection
lo_nd_employee = wd_context->get_child_node( name = wd_this->wdctx_employee ).
get element via lead selection
lo_el_employee = lo_nd_employee->get_element( ).
get single attribute
lo_el_employee->get_attribute(
exporting
name = `PERNR`
importing
value = lv_pernr ).
*Check the input here
If lv_pernr is initial.
get message manager
data lo_api_controller type ref to if_wd_controller.
data lo_message_manager type ref to if_wd_message_manager.
lo_api_controller ?= wd_this->wd_get_api( ).
call method lo_api_controller->get_message_manager
receiving
message_manager = lo_message_manager
report message
call method lo_message_manager->report_error_message
exporting
message_text = u2018Please input the personnel Numberu2019
Reply if you required any further assistance.
Thanks & Regard ,
Monishankar C

How to make the matrix report in OBIEE

Similar Messages

Maybe you are looking for