How to merge one swf to another
Hi,
I want to merge two swf file in to a single swf file, how i
can achieve that , since i have done some part of my project
modules in cairngorm framework and other parts of module i have
coded with out using any frame work, intern both the module
generates separate swf file, i just want to merge these two swf
files in to single swf file so that i can get whole project in a
single swf.
Regards
Kumar
To have one application SWF load another application SWF, use
the SWFLoader component. If you have in fact created Flex modules,
then use ModuleLoader component.
Similar Messages
-
How to call one .SWF from another?
How do I call one .SWF from another. I built a very beefy
base .SWF, and want to add music overlay, and an intro slide show
to the exsting Flash animation, but put it in a second .FLA/.SWF
file. How do I call one from the other?
This will be embedded in an HTML file but I assume this is
superfluous to my question.
F.Z.I think you should open that Another SWF (FLA),
and add some actionscript..
For example, you could create a movie clip, and write
actionscript in the
first keyframe:
loadMovie("
http://www.somewebpage.com/movie.swf",
this);
"FredZimmerman" <[email protected]> wrote in
message
news:ftnjas$mj5$[email protected]..
> How do I call one .SWF from another. I built a very
beefy base .SWF, and
> want
> to add music overlay, and an intro slide show to the
exsting Flash
> animation,
> but put it in a second .FLA/.SWF file. How do I call one
from the other?
>
> This will be embedded in an HTML file but I assume this
is superfluous to
> my
> question.
>
> F.Z.
> -
How to merge one library into another library?
In iPhoto 9.6, is it possible to merge one library into another library? Or otherwise, import individual pictures, from one library into the other library? All of this happening on the same computer.I understand that this feature was covered by Aperture but that this is no longer supported under Yasemite?
No
The current version of Aperture can merge libraries (I have no idea where you got the incorrect information that it can not)
The paid version of iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ - can
Those are you only two choices
LN -
Question? How to make one swf initialize another swf?
On my website i would like to have my main swf which has a button that links to a contact form. This main swf is in its own div and i want to have another div with a contact form swf file that i created.
So i want the first swf's contact button to load the contact swf in the other div.
question is how would i change the current contact button from loading a link to a html page into a button that loads the swf in the other div?again,
you need to know some javascript. at least, enough to assign innerHTML to your div or learn some jquery.
then you need to look-up the external interface class.
neither of these are easy if you're just starting with flash and/or just starting with javascript.
i don't think anyone will do this work for you unless you hire someone or find a friend that will do it for you. -
How to merge one library into another? Followed directions with no luck.
3.4.3 library add/merge problem. 13"rMBP trying to add (in this case) a 900MB library into my larger 200GB library. I have tried dragging and using the menu items with no luck. The pop-up display says merging and when done I don't see the new project in the larger library. Right before the operation is complete I see the project (library) title fly from the project list back to the finder. Very confusing. Has anyone else heard of or experienced this problem. Thanks.
LelandDoes the library that you want to to merge into your other library contain images or projects that already are in your main library? In that case you may not see a new project, but the new images may be merged into the older projects.
Or are all images in the library that you want to merge are new images? Is the file size of your Aperture library larger after merging?
There has been a buggy behaviour reported, that merging does not work, if all new images have been imported from the Photo Stream. -
When I merge one project with another, Aperture 3 randomly scrambles the photos of the project being merged, instead of keeping them in the chronological order that I shot them in. What can I do to correct this?
The photos have just been dumped into a new home and need to be told how to be arranged. Go to the top left of the browser view for the merged project and select the desired sort order from the drop-down and they'll all sort according to that setting.
-
Passing variables from one swf to another
I am facing problem to pass variable from one swf to another.
I am using loadMovie to load another swf. how can I pass a variable
value to another swf. Can anyone help me plz? It is somewhat
urgent.
thanx in advance.first of all:
this is the Flash Media Server and your problem is not
related to FMS....
second thing related to the "somewhat urgent" :
we, users on this forum, are not there to do your job... so
calm down otherwise no people will answer your question. This forum
is a free support forum that community of Flash developer use to
learn tricks and to solve problems.
Possibles solutions:
If the two swf are seperate you can use LocalConnection to
establish a connection between different swf.
If you load a second swf into the first one you can interact
like a standard movieClip(only if there from the same domain or if
you a policy file on the other server)
You can use SetVariable(via Javascript) to modify a root
variable on the other swf and check with an _root.onEnterFrame to
see if the variable had changed in the second swf.
* MovieClipLoader will do a better job, in your specify case,
than the loadMovie. Use the onLoadInit event to see when the swf is
really totaly loaded into the first one otherwise you will have
timing issues.
My final answer(lol) is the solution 2 with the
notice(*) -
How to refer one view from another view?
Hi,
I have 2 views in my Adobe Flash Builder mobile app. I need to refer the first view in my second view.
How to refer one view from another view? Or how to create a reference to a view wherever needed?I don't need any data from my first view. In a certain flow, I need to make my first view to be invisible.
for eg., My First view is in portrait mode. I change the device to Landscape. In the landscape mode, I want to show a completely different view (second view).
In this case, what happens is, I see my first view in Landscape mode for a second. Then the second view appears. When I change to Landscape mode, only the second view should be seen. I need to make my first view to be completely invisible in the OnOrientationChanging event of
StageOrientationEvent
As stage object and StageOrientationEvent works at application level, I need to know how to refer my first view object in the application level.
private function onOrientationChanging(soe:StageOrientationEvent):void
MyFirstView.Visible = False; ====> don't know how to refer MyFirstView here
Is my question clear now? -
How to call one JSFF into another JSFF
Hi,
I am very new to ADf. Could you please tell me how to call one JSFF inside another JSFF. We have a common pop-up written in one JSFF. Is there any best approach to get this pop-up into other JSFF.
Thanks in Advance.
Regards
NarasimhaIf you want to resue the jsff code, make use of bounded task flow with page fragment and then use it as a region.
For more details you can refer: http://docs.oracle.com/cd/E21764_01/web.1111/b31974/taskflows_regions.htm
One more:
http://docs.oracle.com/cd/E18941_01/tutorials/jdtut_11r2_57/jdtut_11r2_57.html -
How to include one view into another view
Hi SDN's,
Could any please tell me,How to include one view into another view.
In my requirment.I want to create a 'Z' view for an interface .In that view i have to take,
1) Ship-to-email adrr by
LIKP-KUNNR -> KNA1-ADRNR
KNA1-ADRNR -> ADR6-ADDRESNUMBER.
2) E-mail addr of person who created the document.i.e
LIKP-ERNAM -> USR21-BNAME.
USR21-ADDRESNUMBER -> ADR6-ADDRESNUMBER
USR21-PERSNUMBER -> ADR6-PERSNUMBER.
In both the case we have to pass ADDRESSNUMBER to ADR6 table.
If we pass these condition it fails,B'Coz at a time it passes Two ADDRESSNUMBER and a PERSNUMBER.
So i created two which fetches only the email addr of person who created the document.and another view fetches Ship-to-email addr.
Now i want to include the second view into first view . Is it possible?or please
tell me someother way to get these email addresses in a single view.hi
as per my knowledge, nested views are not possible. However, while creating a new view, selection method will not giv u option to select the already created view(S) except the tables..i think so.
regards,
shamim -
How to call one program from another program
Hai,
How to call one program through another program.
Example.
I have two programs 1.ZPROG1 2. ZPROG2.
When i execute ZPROG1 at that time it should call ZPROG2.Hi ,
u can use submit statement to call a program .
DATA: text TYPE c LENGTH 10,
rspar_tab TYPE TABLE OF rsparams,
rspar_line LIKE LINE OF rspar_tab,
range_tab LIKE RANGE OF text,
range_line LIKE LINE OF range_tab.
rspar_line-selname = 'SELCRIT1'.
rspar_line-kind = 'S'.
rspar_line-sign = 'I'.
rspar_line-option = 'EQ'.
rspar_line-low = 'ABAP'.
APPEND rspar_line TO rspar_tab.
range_line-sign = 'E'.
range_line-option = 'EQ'.
range_line-low = 'H'.
APPEND range_line TO range_tab.
range_line-sign = 'E'.
range_line-option = 'EQ'.
range_line-low = 'K'.
APPEND range_line TO range_tab.
SUBMIT report1 USING SELECTION-SCREEN '1100'
WITH SELECTION-TABLE rspar_tab
WITH selcrit2 BETWEEN 'H' AND 'K'
WITH selcrit2 IN range_tab
AND RETURN.
regards,
Santosh thorat -
How to call one EJB in another EJB?
How to call one EJB in another EJB? Please explain with some example code.
To refer a Ejb from another Ejb include <ejb-ref> element in ejb-jar.xml
<session>
<ejb-name>EjbA</ejb-name>
<ejb-ref>
<ejb-ref-name>EjbB</ejb-ref-name>
<ejb-ref-type>Entity</ejb-ref-type>
<home>com.ejb.EjbBHome</home>
<remote>com.ejb.EjbB</remote>
</ejb-ref>
</session>
Include a <reference-descriptor> in weblogic-ejb-jar.xml
<weblogic-enterprise-bean>
<ejb-name>EjbA</ejb-name>
<reference-descriptor>
<ejb-reference-description>
<ejb-ref-name>EjbB</ejb-ref-name>
<jndi-name>com.ejb.EjbBHome</jndi-name>
</ejb-reference-description>
</reference-descriptor>
</weblogic-enterprise-bean>
In EjbA Bean class refer to EjbB with
a remote reference to EjbB.
InitialContext initialContext=new InitialContext();
EjbBHome EjbBHome=(EjbBHome)
initialContext.lookup("com.ejb.EjbBHome");
EjbB ejbB=EjbBHome.findByPrimaryKey(primarykey); -
I don't know if this can be done but here it goes. I have 2
flash anamation on my site. Both have several scenes in them. My
question is? When linking over from one swf. to another. Can you
script it to start at a specific scene or must you start at the
begining of the swf.
Thanksfrom the loaded swf's main timeline:
MovieClip(parent.parent)
will reference the timeline to which the swf's loader has been added. so, to reference a variable (eg, scoreVar) on that timeline, use:
MovieClip(parent.parent).scoreVar -
Is there any way to pass value from one SWF to another ?
I am doing project using flash, now I cant pass a value from one SWF to another, is there any way to pass value from one SWF to another.
thanksHi,
Just to confirm here do you simply want to communicate between two SWFs without involving Flash Media Server. If this is the case one good way of doing it is to use a local connection. It can be used for direct communication between two separate instances of the flash player. However if you want to involve multiple clients sharing a common variable then you may have to use Shared Object for this. Please let me know what is the actual use case, is it multiple clients sharing a common variable or different player instances communicating between themselves.
Thanks,
Abhishek -
How to copy one request to another request
Hi all,
How to copy one request to another new request?
I have a released workbench request in which it has around 1200 Objects (including data elements, domains, programs and many more), now i need to copy all these objects into a new request.
I can do this by SE03 (Include Objects in a Transport Request ) transaction, but it is a lengthy process.
Is there any way to copy directly in one go.
Plz help...
Regards,
Satish Reddy D.Hi,
The thing is like this....
i have a released request in which we have more than 1200 objects, in that i dont need 10 objects.
so when i create it as copy of transport request, i just deleted those 10 objects and saved.
Now, if i transport the new request how many objects will go? 1200 or 1190?
in the new request i am getting the old request under Comment: Object List Included.
is it necessary to transport the old request?
i need to transport only 1190 objects.
Regards,
Satish Reddy.
Edited by: Sathish Reddy on Jan 28, 2010 2:18 PM
Maybe you are looking for
-
How to add existing warehouse to the existing item in OITW
Hi, Could somebody help me to resolve this problem: I try to add via SDK (using ItemWarehouseInfo object) existing item to existing warehouse - OITW table (our SBO v.2004 configured to not open automatically all warehouses for all items). - like via
-
Having a problem, no idea how to fix or categorize
I had just installed the Tiger upgrade today, 10.4.3. After doing so and my Mac told me to reboot, it gave me the spinning wheel and woulnd't reboot. I manually shut down the Mac and turned it back on. The computer gave me the spinning wheel again at
-
Oracle 8.1.7 ee on Redhat linux 7.1
Installation does not start when i run ./runInstaller script. i have jre 1.1.6_v5_glibc it also does not give any error but does not show any window and processes are running.
-
How do I embed a utube in a photo for a signature?
I am setting up some signatures in MAIL and wanted to use my company photo and embed a utube video in the photo. How do I do that?
-
I have seen several posts on the error message we are getting for one of our reports. We are using the Printed Purchase Order rdf file but I am using the XML processor to associate it with an XML template. It works fine for all of our POs except for