How to mount Images in-use?

Hi folks,
Recently I had a sparse-image shared over network mounted on my notebook. But I forgot to unmount, closed the book and went outside. A few days later I got back and now my image isnt mounted anymore, but appears half-transparent in the finder.
I cant either access, open, copy, delete, scan or repair it. Its totally blocked cauz it seams to be still in use.
Does anyone have an idea how to tell the finder or file that its not in use anymore?
many thanks for help!
kind regards
josh

Read this whole message before doing anything.
Back up all data.
Step 1
Hold down the option key and select
Go ▹ Library
from the Finder menu bar. Delete the following items from the Library folder (some may not exist):
Caches/com.apple.finder
Containers/com.apple.ShareKitHelper
Leave the Library folder open. From the menu bar, select
 ▹ Force Quit...
then select Finder from the list and press return. If the problem is resolved, stop here. Close the Library folder. If you still have the problem, continue.
Step 2
Move the following item from the open Library folder to the Desktop:
Preferences/com.apple.finder.plist
Relaunch the Finder again. If the issue is still not resolved, put the item you moved to the Desktop back where it was, overwriting the newer one that may have been created in its place. You don’t need to replace the files you deleted in step 1. Stop here and post again.
If the Finder is now working normally, recreate your settings.

Similar Messages

How to make image resizable using mouse ?

Hi,
I want to know about that how to resize image by using mouse in Java Canvas. I created some tools like line, free hand, eraser. And want to know how to make an image resizable in canvas by using mouse. An image is jpeg, png, or gif format. I want to make image stretch and shrink by using mouse.
Please help me..
Thnax in advance.
Manveer

You make a listener to handle the mouse event that you want to capture, then program the affect you want using the event as the trigger.

How to view image by using webcam at other computer.

I am student. Now I make one project by using LabVIEW software.
Now, my question is:
I have two computer, both computer got install software LabVIEW. And the programming for viewing image by using webcam already finished done.
Now is, I want to open Webcam at computer B from Computer A. I already search, found that techique "Web Publishing Tools" can do this. Beside this, got another easier technique to do this?

There are other ways in which you can transfer images over the network but you will need to do some programming for it. Have a look at the following links:
Streaming IMAQ Images Over a Network (or Internet)
Transfer Images Over the Network
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies

How to upload images to use in portal page

I need to know how to take an image stored on my hard drive and make it so that it is accessible to be used in my portlets.

Brent,
I recommend that you go through the tutorials on the OTN Portal Page to familiarize yourself with content areas and other Portal features. Look under the Documentation tab.
Regards,
Jerry
null

How to display images by using URLs in Interactive Reporting

Hello everybody,
My client has the Hyperion System 9.3 suite.
We have a report in Interactive Reporting showing product data.
The source for the report is a relational database (SQL Server).
The data is grouped by product.
My client needs the product's picture (jpg) in the report.
The problem is that product images are not available in the relational database but via URL like this:
http://client_domanin//Hyperion/id_product.jpg
(the name of the image equals the id of the product).
I was thinking to solve this problem using Java Script.
I don't know Java Script and don't know how to 'integrate' the JavaScript code with Interactive Reporting.
How should the Java Script look like?
Any help will be extremely appreciated.
Thank you all!
Daniela

You might be able to do it if you are using the iHTML view of the Report not the Interactive Reporting Web Client (Plug-in)
I do not have a 9.x server available to test this so it is guess on how i did it once in a Proof of Concept.
In Results section Create a Computed Item that will be the HTML tag for the Graphic
the syntax would look something like below
'<IMG SRC = "http://client_domanin//Hyperion/" + id_product + ".jpg">'
WHERE id_product is a column in your Data.
Again this will not show a graphic when viewed with Interactive Reporting Web Client or Desktop Client.
Good Luck, hope this is helpful
Wayne

How to display Image by using Array?

Hi all, I know to how to display the image in MXML by using
AS 3.0
like this:
<?xml version="1.0"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
width="100" height="80" borderStyle="solid">
<mx:Script>
<![CDATA[
[Embed(source="logo.gif")]
[Bindable]
public var imgCls:Class;
]]>
</mx:Script>
<mx:Image source="{imgCls}"/>

<mx:Image source="@Embed('assets/Nokia_6630.png')"/>
</mx:Application>
But the thing is I am building a list for display the images,
the values is come from the Array. I am trying a different way for
display it but no working, here is my code:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml">
<mx:Script>
<![CDATA[
public var PICTURE_ARRAY:Array = [{label:"FileA",
icon:"@Embed('upload/myjpg.jpg')"},
{label:"FileC", icon:"@Embed('upload/myjpg.jpg')"},
{label:"FileB", icon:"@Embed('upload/myjpg.jpg')"}]
]]>
</mx:Script>
<mx:Tile id="pictureSelection" height="180" width="500"
borderStyle="solid">
<mx:Repeater id="picRP"
dataProvider="{PICTURE_ARRAY}">
<mx:VBox horizontalAlign="center" verticalAlign="middle"
verticalGap="0" borderStyle="none" width="100" height="100">
<mx:Image width="80" height="80"
source="{picRP.currentItem.icon}"
toolTip="{picRP.currentItem.icon}"/>

<mx:Label text="{picRP.currentItem.label}" width="100"
textAlign="center"/>
</mx:VBox>
</mx:Repeater>
</mx:Tile>
</mx:Application>
Can anyone tell how to display the array value into Image
tag? Thanks

In your data you have this:
{label:"FileC", icon:"@Embed('upload/myjpg.jpg')"},
change it to this:
{label:"FileC", icon:"upload/myjpg.jpg"}, // this is just the
filename, not embedded
In your Repeater you have this Image tag:
<mx:Image width="80" height="80"
source="{picRP.currentItem.icon}"
toolTip="{picRP.currentItem.icon}"/>
which is fine, except for the toolTip. The toolTip uses a
string, not an image. If you want to show an image in the toolTip,
you'll need to write your own toolTip class.
Now the source property of the image will be given the URL to
the image which will then be requested from the server and
downloaded at runtime - it is not embedded.
If you need to embed the images, then your dataProvider
should have the variable name associated with the embedded
image.

How to expand image to use entire drive

ZfD 7. I'm taking an image of a PC, installing a larger hard drive,
and then putting the image on it. How do I tell it to use the entire
drive? I'm sure there is a way, but I can't find it.
Thanks,
Ken

On Tue, 20 Apr 2010 06:47:02 GMT, Shaun Pond
<[email protected]> wrote:
>KeN,
>
>simplest way is to edit the zmg with image explorer and update the
>partition info - make it bigger than your biggest disk
That is what I needed! Thanks Shaun!
Regards,
Ken

How to handle image files used in PDF forms

With LiveCycle, I've created an interactive form for Help Desk-type requests, and the form works beautifully. I've tested it, and everything works. Show. Hide, Clear fields. And all the other behaviors I added with Action Builder.
As a final design feature, on my local machine at work, I added a header image (which is in My Documents>My Pictures). I tested locally and uploaded the form to Sharepoint and tested from there, and from what I can remember, the form looked fine. The header was intact. So I kind of assumed the image was embedded somehow.
So I brought the file home and opened it there, and -- Voila! -- no header image!
What happened?
Does the image file need to be uploaded and the path relative to the location of the file? To me, this doesn't seem to be a huge problem. More of an unexpected one. I can probably upload the image to someplace in Sharepoint and then set the image path in the XML.
But I'd like to hear the experiences of those who have used image files in their LiveCycle forms.
Message was edited by: ashish gupta. to make the title more descriptive and added some tags.

In the Object palette make sure Embed Image Data is ticked.

How can I see how often and where an image is used in the site?

Just realized the post appeared twice as at first sending I
got an error page (contains no data...).
So, please do all answer to the other post, so that all
replies get collected at one post only.
Hello,
please excuse my maybe dumb question but converting from
GoLive I am still trying to find several practical effective
workflow features in DW ...
1. where in the sitewindow/assets or files panel can I see an
indication at each image if and how often it is used in a site?
2. and where can I see/check on which pages it is used?
Thanks in advance for guiding me there ...
bye,
Beate

> How do DW users know how often and where an image is
used on the site
> then?
I'm not sure what the benefit is of knowing how often an
image is used, but
a search for the image by filename would do the trick.
And just so you'll know, this is a peer forum, not an
official communication
vehicle to Adobe. We are all just users here, not Adobe
employees.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"beatrice" <[email protected]> wrote in
message
news:[email protected]...
> OK. I sent the below feature request.
> How do DW users know how often and where an image is
used on the site
> then?
> always doing a find/search?
> in GoLive there was an simple window where all the files
a page consisted
> of
> were listed plus all the files that were pointing to
that page. such,
> without
> having to open a page links and image and componentes
etc. could be
> changed via
> point&shoot.
>
> Couldn't you all think of this a being great and helpful
and making site
> management easy? Then send in a feature request as well,
please.
>
> ...............
> How can one know by the assets or files list if an image
is used at all on
> the
> site?
> and how many times? and on which pages?
> This is very useful to know especially in larger sites.
> e.g. an image should get changed on one page, now it
would be very good to
> see
> if when it was used on other pages as well if it would
make still sense
> there
> when changed.
> as DW can update files (when e.g. an image name gets
changed) there is a
> way
> this is already recorded. why not take this records and
send this back
> into a
> list/column in the files panel to indicated that the
image is used and
> how
> many times.
> plus to have another window that can display all the
pages the image is
> used
> in.
> so one could click through all those pages and open them
to check the
> image
> there.
> in GoLive that feature was called 'In and Out links' and
one could see a
> page
> in the middle and left and right from it many
branches/lines at which ends
> the
> filenames were visible used in that page.
> so one e.g. could also point and shoot from this list
and change a file or
> image or component simply by point and shooting to the
files panel without
> having to open the pages.
> These features were so practical for an effective daily
workflow that I
> don't
> understand why they haven't been put into cool DW yet.
Please, please do
> so in
> the next release. I can test it thoroughly if you need
testers for it.
> bye,
> beate
>

How to Call Image Viewer from Form application

Hi,
how to call Image viewer using host command on oracle form 6i.
i trying using host command on local/client application .. and it is working ...
but when i try on server application (EBS - UNIX) it does not working ...
thanks ..
regards,
safar

Are you using Forms 6i in client/server mode or web deployed? I'm not sure what you mean by 'try on server application"
Remember that when using a web deployed architecture, a host command will execute the command on the Forms application server, NOT on the client.
To execute host commands on the client you would have to use WebUtil, but that's not available for Forms 6i. Perhaps there are PJC's out there that can do it for you, but I don't want to get in all those details without me knowing if it is relevant for you.

Offline updates mechanism: how many times can you use it before corrupting the image(wim)?

Hi,
As title mentions: "how many times can you use sccm 2012 offline updates for the wim file before corrupting the image(wim)"?
J.
Jan Hoedt

In my experience the offline servicing feature is only OK and too unreliable for production.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

How to create Image as Custom Property Type used in Configurable Web Part?

I wanted to create custom configurable web part property for Image.
Example - the screenshot of Image property used in Image web part is shown below:
My goal is to create as many images as possible in custom configurable web part.
I tried to write the code:
[WebBrowsable(true),
WebDisplayName("Example Photo"),
WebDescription("Example Photo of the user"),
Category("Custom User Profile"),
Personalizable(PersonalizationScope.Shared)]
public Image ExampleUserPhoto { get; set; }
However, the result does not display Image configurable web part property.
I wonder why the data type Image does not cause the custom web part to have Image configurable web part property.
Other data types such as Boolean, Enum, Integer, String and DateTime can be used.
How can I create Image as Custom Property Type used in Configurable Web Part?

I have examined that context node __00 has been enhanced,and has a class name z___00. But when I created a new attirubute by right click " Attributes" with wizard under context node __00.There is still a error message "view is not enhaced or copied with wizard".
But when I created a method "getvaliation " in the class of context node zcl__00, the attribute 'valiation' automatically created(at the same time the method "getvaliation' automatically created for the attribute 'valiation') and I need not to create attibute 'validation' by wizard . It seemed as if the problem is resloved. But when I make test for it in web ui .There is a runtime erro message.
Do I need to make some configurations in the business object layer for the checkbox? but the checkbox is only used as a flag to decide whether a backgoud job is needed to be executed.
Edited by: samhuman on Jun 22, 2010 10:31 AM

Hello, i am new to the mac and i need to learn how to re image using an external hard drive

Hello, i am new, like baby fresh new,...lol, to the mac and i need to learn how to re-image using an external hard drive.

How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

How to store image in the oracle database 10.2. using File Maker 10.

Hi.,
I want to store image, media file in the oracle database using File Maker as a front end.
I connect Oracle using odbc from file maker. There are table and in that table there a column "pict" of blob type. but this column is not showing in the file maker.
2. Here I can not change the data type of any column.
Now how to store images in the oracle table using odbc or any other tool.
Regards,
Shyam

I wrote an example for my students, you can find it here. It's using PHP as the front end but all you need to do is know how and leverage the stored procedures. All code is downloadable in zip files from the blog.
http://blog.mclaughlinsoftware.com/php-programming/oracle-lob-processing/

How stop PS6 from removing the DPI value from an image when using "save for the web"?

How stop PS6 from removing the DPI-value from an image when using "save for the web"?
Example:
- Open a tif image, that contains a dpi value (resolution).
- Use the splice tool in PS6.
- Export the slices with "Save for web", as gif-files.
Then the dpi value is removed, the gif files has no dpi value (it's empty).
How can we stop PS6 from removing the dpi value when using "save for web"?
OR:
When using the slice tool, how can we save the sliced pieces without PS removing the dpi value?

you can make your art go a little bit over the bounds. or you can make sure your artboart and art edges align to pixels

How to mount Images in-use?

Similar Messages

Maybe you are looking for