How to move to the next Selected Item in a list.

*Edited*
I was just wondering how I could make a button which would move the currently selected item to the next in the array loaded into a List component. I would think to do it through AS or an event, but I'm not sure what I would reference in accordance to that component. The help would be appreciated, thank you.

You can set the selectedIndex. When next button is clicked increment the selectedIndex.
If( list.selectedIndex < list.dataProvider.length - 1 )
list.selectedIndex++;

Similar Messages

How to move to the next cell in excel sheet

hi,
i am working with excel sheet using cvi. i need to put data in cells for that i have function ExcelRpt_WriteData();
but with this i can give fixed cell range , instead of that is there any function in cvi to point next cell automatically instead of giving cell range we will give intially starting cell range then it has to point to next cell in the sheet. is there any function to do that what i amn expecting.
Thanks & Regards

Hello,
Excel Report Generation instrument is built on top of excel2000.fp, the complete ActiveX interface to Excel. excel2000.fp is loaded together with ExcelReport.fp when you run your project, and you should be able to use functions from both instruments in your app (I have not tested it but since ExcelReport is a wrapper of calls to excel2000 instrument, I'm confident it is true).
Given this, you can look at excel2000dem example project that you can find on your disk in samples\activex\excel folder together with excelreportdemo which you may have already studied. In this example there are functions to write to a range of cells addressed by row and col indexes, specifically Excel_RangeSetItem (). This can be a good starting point: there is not the automatic cell advance, but you can address cells individually so you can develop your function according to your needs. Excel2000.fp is a low level interface to Excel: in this respect it is a bit more obscure and requires more effort in use but includes more functions than ExcelReport.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

TS1717 I just downloaded a song and it only plays the first 50 seconds and then moves to the next song in the list. How can I get it to play the rest of the song?

I just downloaded a song and it only plays the first 50 seconds and then moves to the next song in the list. How can I get it to play the rest of the song?

If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copy of the track and try redownloading a fresh one. See the following document for instructions:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

How do I change the image selected for the finalized movies pane in all events?

How do I change the image selected for the finalized movies pane in all events? I made a movie some time ago in iMovie, and a still from this now appears as the image for Finalized Movies in the All Events pane (as well as showing up if I then click on this pane to take me to Finalized Movies). Anyone know how to change or delete this image, please?

Unfortunately, the suggested solution in that thread does not work and the thread appears to be closed to replies. That is, even though I am logged in the Reply|Quote|Mark as answer|Report as abuse items are missing.
The suggested solution is:
First, I found I had "img100.png" in C:\Windows\Web\Screen and
C:\Windows\WinSxS\x86_microsoft-windows-themeui-client_31bf3856ad364e35_6.2.9200.16384_none_69ee3fa2269e545e
1. Belonging to the Administrators Group, I replaced file Owner TrustedInstaller with my Username on both "img100.png" files
2. After resizing the image I wanted to see on the Login screen to the resolution of "img100.png" file,
I copied and pasted it to both "img100.png" files keeping this way the format (extension) and resolution of the original "img100.png" file,
which I permanently deleted.
However, I have not been able to replace the img100.pgn in C:\Windows\Web\Screen even after taking ownership of it and setting the permissions for my userid to All. I edit it with mspaint and then try to save it. The save starts that then says the
save was interrupted.
The appears to be some additional protection besides the standard acls.
http://www.saberman.com

How can I return to the last selected item in a dialog box

In OS 9 using Dreamweaver (for example) when I was adding images to a document, each time I added one the dialog box would return to the last selected image and I could just arrow down to the next in the list, add it (exiting the dialog box) and then repeat the process until I had added all the images in the folder. Now, using OS 10.4, after I add an image, and return to the add image dialog box it goes to the first item in the folder list instead of the last selected item. this really slows the process down, and when I'm adding 100 items or so, it's a real drag. I figure there has to be a way to get the dialog box to return to the last selected item, but I don't know what it is. Help!

sorry, that is not what I want to do.
I want to return to the initial state before I quit the app.
Actually, I want to return to the intial state after I click a row in a table the second time.
Sorry, I didn't say clearly.

While running how do I get my podcast to play one song and move to the next and not skip to the next after a few seconds into the song?

I recently started running and downloaded the Couch to 5K webcasts, while running how do I get my podcast to play one song in it's entirety and move to the next and not skip to the next after a few seconds into the song? I beleive it's the motion of the running that is causing it, is there a setting I need to change?

Hello nowrunning,
Is the "Shake to Shuffle" option turned on in your iPod's settings? To check, head to Settings -> Music -> Shake to Shuffle and make sure it is set to Off.
B-rock

Newbie: How to go to the next frame after movie clip is complete

I know this should be the simplest thing to do, but I can't
figure it out. I have a movie clip on my timeline. I want it to
play completely before the timeline moves to the next frame. Can
someone point me in the right direction?

On the last frame in the movieclip, place this code (it's
Actionscript 2).
_parent.nextFrame();

How do I change the row selection by mouse movement

How do I change the row selection on a jtable by mouse over events?
Thanks, Randy

got it thanks...

Hi do someone now how to fix this "when i press Tab button on the keyboard the cursor don't move to the next string control"

When i press Tab button on the keyboard the cursor don't move to the next password control. i have simple login dialog in web ui builder.
When i run the vix i need to press two times Tab to move from username string control to the next password "password control" my Tab index for the username
control is "1" and for the password is "2' and i try to use all of the 3 options for TabNavigation Local, Cycle and Once and noone work.
Thanks

I attached one simple example of the issue.
Thanks for the Reply.
Attachments:
Login Dialog.zip ‏2 KB

How can I change the name of item in TableViewController iOS

How can I change the name of item in TableViewController? I want to be able to change the title of an item if I added one. Code:
// ViewController.m
// Movie List
// Created by Damian on 20/02/15.
// Copyright (c) 2015 Tika Software. All rights reserved.
#import "ViewController.h"
@interface ViewController ()
These outlets to the buttons use a `strong` reference instead of `weak` because we want
to keep the buttons around even if they're not inside a view.
@property (nonatomic, strong) IBOutlet UIBarButtonItem *editButton;
@property (nonatomic, strong) IBOutlet UIBarButtonItem *cancelButton;
@property (nonatomic, strong) IBOutlet UIBarButtonItem *deleteButton;
@property (nonatomic, strong) IBOutlet UIBarButtonItem *addButton;
// A simple array of strings for the data model.
@property (nonatomic, strong) NSMutableArray *dataArray;
@end
#pragma mark -
@implementation ViewController
- (void)viewDidLoad
    [super viewDidLoad];
     This option is also selected in the storyboard. Usually it is better to configure a table view in a xib/storyboard, but we're redundantly configuring this in code to demonstrate how to do that.
    self.tableView.allowsMultipleSelectionDuringEditing = YES;
    // populate the data array with some example objects
    self.dataArray = [NSMutableArray new];
    NSString *itemFormatString = NSLocalizedString(@"Movie %d", @"Format string for item");
    for (unsigned int itemNumber = 1; itemNumber <= 0; itemNumber++)
        NSString *itemName = [NSString stringWithFormat:itemFormatString, itemNumber];
        [self.dataArray addObject:itemName];
    // make our view consistent
    [self updateButtonsToMatchTableState];
#pragma mark - UITableViewDelegate
- (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section
    return self.dataArray.count;
- (void)tableView:(UITableView *)tableView didDeselectRowAtIndexPath:(NSIndexPath *)indexPath
    // Update the delete button's title based on how many items are selected.
    [self updateDeleteButtonTitle];
- (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath
    // Update the delete button's title based on how many items are selected.
    [self updateButtonsToMatchTableState];
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
    // Configure a cell to show the corresponding string from the array.
    static NSString *kCellID = @"cellID";
    UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:kCellID];
    cell.textLabel.text = [self.dataArray objectAtIndex:indexPath.row];
    return cell;
#pragma mark - Action methods
- (IBAction)editAction:(id)sender
    [self.tableView setEditing:YES animated:YES];
    [self updateButtonsToMatchTableState];
- (IBAction)cancelAction:(id)sender
    [self.tableView setEditing:NO animated:YES];
    [self updateButtonsToMatchTableState];
- (void)actionSheet:(UIActionSheet *)actionSheet clickedButtonAtIndex:(NSInteger)buttonIndex
    // The user tapped one of the OK/Cancel buttons.
    if (buttonIndex == 0)
        // Delete what the user selected.
        NSArray *selectedRows = [self.tableView indexPathsForSelectedRows];
        BOOL deleteSpecificRows = selectedRows.count > 0;
        if (deleteSpecificRows)
            // Build an NSIndexSet of all the objects to delete, so they can all be removed at once.
            NSMutableIndexSet *indicesOfItemsToDelete = [NSMutableIndexSet new];
            for (NSIndexPath *selectionIndex in selectedRows)
                [indicesOfItemsToDelete addIndex:selectionIndex.row];
            // Delete the objects from our data model.
            [self.dataArray removeObjectsAtIndexes:indicesOfItemsToDelete];
            // Tell the tableView that we deleted the objects
            [self.tableView deleteRowsAtIndexPaths:selectedRows withRowAnimation:UITableViewRowAnimationAutomatic];
        else
            // Delete everything, delete the objects from our data model.
            [self.dataArray removeAllObjects];
            // Tell the tableView that we deleted the objects.
            // Because we are deleting all the rows, just reload the current table section
            [self.tableView reloadSections:[NSIndexSet indexSetWithIndex:0] withRowAnimation:UITableViewRowAnimationAutomatic];
        // Exit editing mode after the deletion.
        [self.tableView setEditing:NO animated:YES];
        [self updateButtonsToMatchTableState];
- (IBAction)deleteAction:(id)sender
    // Open a dialog with just an OK button.
    NSString *actionTitle;
    if (([[self.tableView indexPathsForSelectedRows] count] == 1)) {
        actionTitle = NSLocalizedString(@"Are you sure you want to remove this movie?", @"");
    else
        actionTitle = NSLocalizedString(@"Are you sure you want to remove these movies?", @"");
    NSString *cancelTitle = NSLocalizedString(@"Cancel", @"Cancel title for item removal action");
    NSString *okTitle = NSLocalizedString(@"OK", @"OK title for item removal action");
    UIActionSheet *actionSheet = [[UIActionSheet alloc] initWithTitle:actionTitle
                                                             delegate:self
                                                    cancelButtonTitle:cancelTitle
                                               destructiveButtonTitle:okTitle
                                                    otherButtonTitles:nil];
    actionSheet.actionSheetStyle = UIActionSheetStyleDefault;
    // Show from our table view (pops up in the middle of the table).
    [actionSheet showInView:self.view];
- (IBAction)addAction:(id)sender
    [self.dataArray addObject:@"New Movie"];
    // Tell the tableView about the item that was added.
    NSIndexPath *indexPathOfNewItem = [NSIndexPath indexPathForRowself.dataArray.count - 1) inSection:0];
    [self.tableView insertRowsAtIndexPaths:@[indexPathOfNewItem]
                          withRowAnimation:UITableViewRowAnimationAutomatic];
    // Tell the tableView we have finished adding or removing items.
    [self.tableView endUpdates];
    // Scroll the tableView so the new item is visible
    [self.tableView scrollToRowAtIndexPath:indexPathOfNewItem
                          atScrollPosition:UITableViewScrollPositionBottom
                                  animated:YES];
    // Update the buttons if we need to.
    [self updateButtonsToMatchTableState];
#pragma mark - Updating button state
- (void)updateButtonsToMatchTableState
    if (self.tableView.editing)
        // Show the option to cancel the edit.
        self.navigationItem.rightBarButtonItem = self.cancelButton;
        [self updateDeleteButtonTitle];
        // Show the delete button.
        self.navigationItem.leftBarButtonItem = self.deleteButton;
    else
        // Not in editing mode.
        self.navigationItem.leftBarButtonItem = self.addButton;
        // Show the edit button, but disable the edit button if there's nothing to edit.
        if (self.dataArray.count > 0)
            self.editButton.enabled = YES;
        else
            self.editButton.enabled = NO;
        self.navigationItem.rightBarButtonItem = self.editButton;
- (void)updateDeleteButtonTitle
    // Update the delete button's title, based on how many items are selected
    NSArray *selectedRows = [self.tableView indexPathsForSelectedRows];
    BOOL allItemsAreSelected = selectedRows.count == self.dataArray.count;
    BOOL noItemsAreSelected = selectedRows.count == 0;
    if (allItemsAreSelected || noItemsAreSelected)
        self.deleteButton.title = NSLocalizedString(@"Delete All", @"");
    else
        NSString *titleFormatString =
        NSLocalizedString(@"Delete (%d)", @"Title for delete button with placeholder for number");
        self.deleteButton.title = [NSString stringWithFormat:titleFormatString, selectedRows.count];
@end

Hey JB001,
Sounds like you have more going on than just a simple issue with Home Sharing and more dealing with Wi-Fi syncing. Start with the article below and see if that may resolve it.
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing
http://support.apple.com/kb/TS4062
If it does not work out, then may I suggest contacting Apple for further assistance to walk you through it or just take that time that you were talking about to sort it out.
Contact Apple Support
https://getsupport.apple.com/GetproductgroupList.action
Regards,
-Norm G.

When playing songs in iTunes playlist, How do you keep the next song from jumping to next song? I am working on song list updating other tracks info and then the next song starts and I lose my spot in song list?

When playing songs in iTunes playlist, How do you keep the next song from jumping to next song? I am working on song list updating other tracks info and then the next song starts and I lose my spot in song list?

Max OSX 10.6.8, iTunes 11.1
I had a similar problem: I wanted to synch my playlist to my iphone. I like to have my playlist sorted by genre. But under each genre, albums are not sorted by the track numbers. This is a problem, especially when I am listening to club mixes when the DJ smoothly transitions from 1 track sequentially to the next one. Under the properties of each audio file, the Track Numbers and Disc Numbers are already there.
My perfect solution was to turn On Sorting - Sort Album under View>Show View Options. Then, select all the songs in that album (Shift click, Cmd click, etc) , and Edit multiple item information (Cmd I). You will see Info-Video-Sorting-Options buttons. Click on Sorting. Then, under Sort Album, Enter the name of the album. Then OK.
You should now have the playlist sorted by Genre, then each album individually sorted by track numbers. On your playlist you should see, if you scroll right, the column added called "Sort Album".
Hope this helps.

Is there a way to link text fields, so when you reach the end of one line it moves to the next?

I often use Acrobat Pro to create forms, whether it be from an existing document or from scratch, and this has always irritated me. I know you can create a text field and select the Multi-line option; however, this is not what I am looking to do. I have a form that has a Yes or No Radio Button, then below it says "If yes, please explain:" followed by 3 lines to respond. When I run it through the Form Creator, it places three text fields on the response lines - as it should. The first line is shorter because of the text, which is why I cannot use the Multi-line option. So is there a way to link these three text fields, so that when I reach the end of the first line it stops and automatically moves to the next?
Here is a picture of what I am looking at:

These types of lines are a left-over from printed forms. There's no reason
to keep using them if your form is digital.
The best approach is to combine the fields to a single multiline field, and
get rid of the first line. Trying to link text fields together is very
tricky. I haven't yet to see it done properly.

Can I use action build to fade one table row as I move to the next row in the table?

I have built a table with 6 rows. Right now,I am building the table row by row when I play the slide. Is there a way to fade or dissolve one row when I move to the next row in the table? I want to be able to de-emphasize the row I just discussed when I move to the next row in the table. I can fade the entire table by invoking that action but I do not seem to be able to use this action one row at a time. Thanks for your comments and assistance.

you will have to use a workaround to get the exact effect you described
create a table with out any text
use text tool to add text and position in each table cell
select the text boxes( command click) in the first row and group them (arrange > group)
use a, build in, to display text and then a, build out, to remove it
repeat the above for the other rows

How to move all the standard and adhoc reports from cube to multi provider

How to move all the standard and adhoc reports from the basic cube to multi provider?
i created this multiprovider to do the maintenence on the basic cube. for example the infocube physical partition, line item dimension and compression.
what we decided to do is move all the Standard and ad-hoc reports from the basic cube to the multiprovider. How to do it? and make a copy of the basic cube and do the maintenence on the cube. please help.
Thanks in advance sdn experts!

Hi Les,
This sounds good and one thing we try to always keep in mind when undertaking such activities is to always minimise the impact to the user and make the process as transparent to them as possible. So lets say you have your multiprovider and copied queries up in Prod, these queries will still pick up the data from the base cube.
Now you need to make a copy of the base cube for some changes to the cube model, I would suggest that you copy the cube and make your changes on the copied cube itself. Then 9depending on the changes done) you can load data from Original Cube to New Cube. When this is being done, make sure that you change your queries to add a restriction on 0INFORPOV by Original Cube.
After the load to the new cube is complete you can run reports restricted to each cube to verify the numbers. Then change the 0INFOPROV restriction in the queries to point to the New Cube and disengage the old cube from the multiprovider.
Hope this helps...

Flash CS5: Is there a keyboard shortcut to move to the next keyframe?

I know there are keyboard shortcuts to move to the next and previous frames -- "." and "," but they're not really what I'm referring to. Also, these keys don't necessarily move to the next and previous frames, rather it just seems to move the red playhead instead of the blue highlighted box (which represents the current frame). This is something I'm also confused about with this keyboard shortcut.
I would like to know though, if there is a keyboard shortcut to move to the next keyframe (each frame that begins with a dot). Thanks for your help.

While I am not quite sure what you mean with
"each frame that begins with a dot"
you can use jsfl to program your own macros/shortcuts
In your case start on page 575 of this document
http://help.adobe.com/en_US/flash/cs/extend/flash_extending_reference.pdf
How to get all keyframes of a specific layer:
Helpful JSFL Scripts for Indexing the Flash IDE Stage | Simplest Explanation

How to move to the next Selected Item in a list.

Similar Messages

Maybe you are looking for