How to open multiple Forms sessions
How do I open multiple sessions of Oracle Forms on the same Client machine. Right now if I have a Forms session open, when I open a new browser session and type in the URL it takes me back to the Oracle Forms session which I have open. I am running Forms 6i on 9iAS on a Solaris machine. Thanks in advance for any suggestions.
Rajesh,
Your question will be answered rightly in the Oracle - Forms discussion formums.
Thanks,
Bala.
Similar Messages
-
How to open multiple forms through differnt responsiblity
I have a 11.5.10.2 system on Linux red hat.
Business pepole want to open multiple forms through different responsiblities from multiple web brower sessions.
However when I opened 2 IE brower sessions, log into responsiblity and open one oracle form in one IE session and log into another responsiblity through second IE session. The first opened form disappear and replaced by the second oracle form opened from another IE session. That means only one Oracle form can be open at the same time for this case.
The current walkaround solution is to open 2 browser sessions using 2 different browsers ( one is IE another is Firefox) to fix this issue. Apparently this is not a good solution.
Can you please give me some suggestion to fix this issue?Thank you very much for the information.
The note mention:
The new forms launcher does not support opening multiple forms applets for the same database across different responsibilities. Opening a form in another responsibility will cause any forms currently open to close. This behaviour is standard.
However it is possible to enable users to open multiple forms sessions for the same database for the same responsibility when using MS Internet Explorer as the client browser. This is made possible with Patch 3293241. This patch is included in Oracle Applications release 11.5.10 as standard.
My current system is 11.5.10.2. I verified that patch 3293241 has been applied. I have no problem to open mutiple forms with in SINGLE web brower session, within same responsibility. I am aware that you can not open multiple forms through SINGLE web brower session through multiple responsiblity. What I tried to do is to open mutiple forms through multiple web browers sessions. Open one brower session, log into system and open a form, then open another web brower session, log into the sytem and open a form through different responsiblity. The system does not allow me to open multiple forms through multiple web brower sessions. Only the latest form can be displayed. Is this standard design for 11.5.10?
Can Form Servlet architecture solve this limitation?
Actually afterI changed some form funcation paramter in Oracle Application Developer responsiblity, I can open 2 form session from 2 different responsiblities through 2 web brower sessions. I can open one form session as Application Developer and another form session through another responsiblity. Then I can switch to other responsiblity through Application Developer responsiblity to open forms.
Is there any other way I can open multiple form sessions to the same database through multiple web brower sessions?
Thanks a lot for your help
Edited by: wcxtao on Nov 3, 2008 9:47 AM
Edited by: wcxtao on Nov 3, 2008 9:57 AM
Edited by: wcxtao on Nov 3, 2008 10:08 AM -
How to Open multiple form with only one screen painter file
Hi all ,
I want to reopen the form without closing the active form ,i want to use same srf file ..
I have already try it but form already exist error occur .
pl help me , how to do it ?
how to open multiple form with same srf file without closing active forms .
thanks in advance,
msw<?xml version="1.0" encoding="utf-16" ?>
<Application>
<forms>
<action type="add">
<form appformnumber="-1" FormType="-1" type="0" BorderStyle="0" uid="BOE" title="Bill of Entry" visible="1" default_button="1" pane="0" color="0" left="365" top="62" width="801" height="410" client_width="785" client_height="372" AutoManaged="1" SupportedModes="15" ObjectType="">
<datasources>
<dbdatasources>
<action type="add">
</action>
</dbdatasources>
<userdatasources>
<action type="add"/>
</userdatasources>
</datasources>
<Menus>
<action type="enable">
<Menu uid="1282"/>
</action>
<action type="disable">
<Menu uid="5890"/>
</action>
</Menus>
<items>
</items>
<ChooseFromListCollection>
<action type="add">
<ChooseFromList UniqueID="-1" ObjectType="-1" MultiSelection="0" IsSystem="1"/>
</action>
</ChooseFromListCollection>
<DataBrowser/>
<Settings Enabled="0" MatrixUID="" EnableRowFormat="1"/>
</form>
<form appformnumber="-1" FormType="-1" type="0" BorderStyle="0" uid="BOE1" title="Bill of Entry" visible="1" default_button="1" pane="0" color="0" left="365" top="62" width="801" height="410" client_width="785" client_height="372" AutoManaged="1" SupportedModes="15" ObjectType="">
<datasources>
<dbdatasources>
<action type="add">
</action>
</dbdatasources>
<userdatasources>
<action type="add"/>
</userdatasources>
</datasources>
<Menus>
<action type="enable">
<Menu uid="1282"/>
</action>
<action type="disable">
<Menu uid="5890"/>
</action>
</Menus>
<items>
</items>
<ChooseFromListCollection>
<action type="add">
<ChooseFromList UniqueID="-1" ObjectType="-1" MultiSelection="0" IsSystem="1"/>
</action>
</ChooseFromListCollection>
<DataBrowser/>
<Settings Enabled="0" MatrixUID="" EnableRowFormat="1"/>
</form>
</action>
</forms>
</Application> -
How top open multiple forms at the same time in HRMS menu
Hi,
When enabling "Close Other forms" in HRMS menu by excluding the function ‘Navigator: Disable Multiform’ Function in the Responsibility Definition (System Administrator -> Security -> Responsibility -> Define), mutliple forms works fine but I'am facing another error.
My problem is: when this option is enabled, I tried to run Payroll run request but it turned out that payroll list of values is returning empty values and I'am unable to select any payroll from list of values. the only way to do so is to remove back ‘Navigator: Disable Multiform’ Function from exclusion section in responsibility.
My requirment is: to have multiple form and payroll run list of values working at the same time
ThanksReason for this , if ur request is attached to more than 1 responsibility , i think this issue will come , we got same issue
we remove it from responsibility list , then it is working fine -
How to open multiple form?
I created a PR form under AP, and it loaded successfully for the first click.
However, how to code it in C# to be able to pop up another PR form? Just like SAP System form, it popups another form when the menu is clicked.
Thank you for your kind attention.
KenHi
Your need to change formUID.
Note: don't use SAP reserved uid's "F_".
HTH
Regards
Sierdna S.
P.S. An example.
Public Function SBO_CreateForm_Select( _
ByRef in_oApp As SAPbouiCOM.Application, _
ByRef in_oCmp As SAPbobsCOM.Company _
) As SAPbouiCOM.Form
Dim oForm As SAPbouiCOM.Form
Try
SBO_Application = in_oApp
SBO_Company = in_oCmp
Dim sFormXmlFile As String = "MY_FORM.xml"
Dim sUniqueID As String = "O99_" & Format(Now.Millisecond, "000") ' where O99 is your parthner ID
Call ReplaceUIDandLoadToB1(sFormXmlFile, sUniqueID)
oForm = SBO_Application.Forms.Item(sUniqueID)
oForm.Visible = True
Catch ex As Exception
Dim s As String = ex.Message
SBO_Log.WriteLog(Me.ToString, "SBO_CreateForm_Select", s)
SBO_Application.StatusBar.SetText(ex.Message, BoMessageTime.bmt_Long, BoStatusBarMessageType.smt_Error)
If Not oForm Is Nothing Then
oForm.Close()
oForm = Nothing
End If
'Me.SBO_FormEventHDL.oPrzSpeForCli = Nothing
Finally
System.GC.Collect() 'Release the handle to the table
End Try
Return oForm
End Function
' Change Form UID
Private Sub ReplaceUIDandLoadToB1( _
ByRef FileName As String, _
ByVal a_uid As String _
Const XML_FormUIDPath As String = "Application/forms/action/form/@uid"
Dim oXmlDoc As Xml.XmlDocument
Try
oXmlDoc = New Xml.XmlDocument
Dim sPath As String = SBO_AppStarupPath
oXmlDoc.Load(sPath & "\" & FileName)
oXmlDoc.SelectSingleNode(XML_FormUIDPath).Value = a_uid
Dim sPercorso As String = System.Environment.GetEnvironmentVariable("TEMP")
oXmlDoc.Save(sPercorso & "\" & a_uid & ".xml")
SBO_Application.LoadBatchActions(oXmlDoc.InnerXml)
Catch ex As Exception
SBO_Application.MessageBox(ex.Message)
End Try
End Sub ' Change Form UID
Edited by: Sierdna S on Sep 30, 2008 9:51 AM -
How to open a form multiple times
pl tell me how to open a form multiple times
HI Sagar,
Before adding the form to SBO
try to get the existing count of the form
as shown below
For int = 0 To objApplication.Forms.Count - 1
If objApplication.Forms.Item(int).TypeEx = FormType Then FormTypeCount += 1
Next
THEN append that with your form type as shown below
objFormCreationParams.FormType=FormType & "_" & FormTypeCount.ToString
Then add the form to SBO
SO every time your form is opened the unique id will like URFORMTYPE_1,URFORMTYPE_2 and so on
Hope this helps
regards
vishnu -
Urgent:: Not able to open/lauch forms session
Hi All,
I had cloned our production instance to create a new instance.
But now I'm not able to open the form session. We are having apps 11.5.10.2.
The dbc file is perfect.. I even checked ICX parameters & related profile values.. seems to be ok..
I can login through /dev60cgi/f60cgi. But can not lauch forms from personal home page.
Can anyone plz suggect wht might be wrong?
Regards..
Edited by: user10200748 on Aug 30, 2008 10:25 PMHi Kali,
Thanks for the response.
I'm not getting any sort of error.. It just dont proceed after clicking the menus.. Even I try to check the error from java console, but even no errors are listed in it..
Moreover , I m getting successful AOLjtest run on the cloned instance.
The inputs I can give is -
The error_log shows -
[Sun Aug 31 07:19:54 2008] [error] [client 160.95.202.46] client denied by server configuration: /fh02/BON/oraapps/common/java/java
[Sun Aug 31 22:22:13 2008] [error] [client 160.95.202.46] client denied by server configuration: proxy:http://severname:8212/pls/BON/f
nd_icx_launch.launch
~
The access_log shows -
160.95.202.46 - - [31/Aug/2008:22:22:11 -0500] "GET /OA_HTML/RF.jsp?function_id=271&resp_id=20456&resp_appl_id=160&security_group_id=0&lang_code=US&oas=NvqKw
EsSQW1RppGR5XrWdw..&formsLink=yes HTTP/1.1" 302 376
lb57gpb1.ced.corp.cummins.com - - [31/Aug/2008:22:22:13 -0500] "GET /pls/BON/fnd_icx_launch.launch?resp_app=ALR&resp_key=ALERT_MANAGER&secgrp_key=STANDARD&s
tart_func=ALR_ALRALERT&other_params= HTTP/1.1" 403 240
~
Regards,
Edited by: user10200748 on Aug 31, 2008 8:36 PM -
HOW TO OPEN A FORM developed IN 10Gds REL2
HI,
How to open a form developed in 10gdsrelease 2 in 10g release1.
It gives ros error.
Thanks in Adv.
Rup
Message was edited by:
Rup
Message was edited by:
RupMy suggestion would be to try converting the form to XML using <10gHome>\bin\frmf2xml.bat, and altering this XML to look like R1 XML. Simply changing the Module version might do the trick, but probably not.
To see the difference between 10gR1 and 10gR2 XML formats, take a reasonably complex R1 form and convert it to XML. Next, upgrade that same form to R2 and convert it to XML. Compare the two XML files.
Applying the knowledge gained from this comparison, modify the XML from your original R2 form. Try converting back to FMB using <10gHome>\bin\frmxml2f.bat Please share your findings with the forum!
Hope this helps,
Eric Adamson
Lansing, Michigan
PS: It is assumed that you have access to both 10gR1 and R2 installations! -
How to open a FORM developed in 10gds release2 into 10gds release 1 ????
How to open a FORM developed in 10gds release2 into 10gds release 1
Thanks in adv.
Rup
Message was edited by:
RupPlease check out the Forms.
-
How to open the forms in Browser.
Dear all,
can anyone tell me how to open the forms develop in form 6i in browser like Internet Explorer.
Muhammad NadeemHi,
The following Host built-in takes you to the specified site,
Host('Netscape http://www.oracle.com');
Best Regards,
Deepak Rai
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Rama Ala ([email protected]):
Hi,
We can open internet browser by using HOST command in FORMS. How to open specific URL into the browser through FORMS.<HR></BLOCKQUOTE>
null -
Open multiple forms, few in Enter-Query mode
Hi All,
I want to open multiple forms from a form using open_form built-in. If user clicks on different items of the parent form different child forms are invoked.
But if one child form is opened in Enter-Query mode (I have 'enter_query;' in its when-new-form-instance) it does not allow to put focus back on parent form and invoke other forms until I execute_query in child form or close the child form.
Waiting for your replies. Thanks in advance.
Regards
MonaHi Friends,
Has anybody ever faced this problem. Please reply.
Regards -
How to open multiple artboard illustrator file in illustrator. Coz, whenever we open a multiple artboard file, illustrator provide an option to chose one artboard but does not allow opening of all artboards. Somebody may explain it
Doug's got it right. It sounds like you are trying to open a later version file in an earlier version. This will always be handled as opening the PDF portion of the file. Try Googling AI_openMultiPagePDF for a script to open these or Resave from the newer version to the older.
-
How to open multiple sql files in only one ssms instance
how to open multiple sql files in only one ssms instance, I can't get anything to work that I find online..I hope you can help us.
I tried opening two files but selecting and hitting enter. it opens one SSMS and two tabs.
Balmukund Lakhani
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
| Facebook
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle -
HOW TO OPEN MULTIPLE TABLES IN SQL DEVELOPER SIMULTANEOUSLY
hello i m new to sqldeveloper so plz dnt laugh if m asking silly question
HOW TO OPEN MULTIPLE TABLES IN SQL DEVELOPER SIMULTANEOUSLYUse the 'pin' on your table editor
http://www.thatjeffsmith.com/archive/2011/11/sql-developer-quick-tip-pin-query-result-sets-and-plans/
Then open your 2nd table. If you want to see both at the same time, right-click on the table editor tab and select 'New Editor Tab Group'
Not a silly question, but no need to shout :) -
Opening multiple visa sessions
I'm having problems with opening multiple VISA sessions for communicating with 4 HP-34401A multimeters in LabVIEW 6.1. If you have a little bit of time, please take a look at what I have here to see if I'm doing something wrong.
Thanks
Attachments:
HP34401_Test.vi 108 KBI have made a look at your VI. I don't have the driver for the instrument I couldn't go into the subVIs and its documentation and I could not change it for you.
1. You initialise only 2 of the 4 meters. Initialize all meters.
2. In sequence 0 you close the session to the meter. In the next loop iteration it will not measure as you intended. Delete the "VISA Close" function.
3. The stop button would cause the while loop to exit. But your handling is a little bit complicated. Do following:
Delete the "not" and case where the stop terminal is connected. Wire the stop terminal directly to the termination terminal of the while loop. With the context menu set it to "stop if True". Wire the VISA sessions to the right border of the while loop and connect t
hem to the "VISA Close" function.
Waldemar
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions
Maybe you are looking for
-
Sales requirement report using ALV
Sales Register Requirement Specifications:---- 1.Fields on selection screen (input screen) : Plant Code From to , Distributional Channel from to , Division from to , Customer Code from to , Period From to , Material Code (can be used using *) . 2.Fi
-
App store - permanently remove apps
Hi, I'm BJ from Wellington, NZ. I was just wondering if there is a way to permanently remove app entries from the app store - via view account. The only help entries I have seen talk about removing an app from a specific computer or device. This is g
-
Signing applets/ access controll violations
I have just created a fairly simple game (much like that marble jumping solitare game), that is nice, fine, and works. But, however I run it in applet viewer, which automaticly gives it full power and stuff. If i try to run it in it's webpage, it say
-
How to automatically modify the Infopackage QM status in a process chain?
We have a process chain that automatically load data to Infocube 0IMFA_1 (The Business Content IM Cube). In this chain we have Infopackage 0CO_OM_OPA_1; this Infopackage has a particularity that remains in a yellow status because it looks for CO orde
-
WLS 8.1sp2 cannot preload Struts ActionServlet
Deployed my WAR to WebLogic Server only (no portal, etc.) and got the following at server startup: <Apr 5, 2004 6:41:40 PM PDT> <Error> <HTTP> <BEA-101216> <Servlet: "MyApp" failed to preload on startup in Web application: "MyApp". javax.servlet.Serv