How to overcome view changes in bdc session method  using recording ?

how to overcome view changes in bdc session method  using recording ?
ex-for mm01 in recording if i selected views basic data1 and basic data2.
i seheduleded for background for after 3 days .
if any body changes views by selecting other views also.
how to overcome this with out programming ?
is there any settings ?

Hi,
I am attaching few threads.Hope these will help you.
If there are any error records in session, all those error records will get poulated in log .SM35 and after the session is completed , u can see error records which can be corrected and reprocessed again
We have the structures BDCLD and BDCLM, which will capture the log details inthe session. Firstly, sesssion should be processed. After that log will be created. Then caputure the information into an internal table using BDCLM and BDCLD.
and refer the link.
error correction in bdc session
regards
Madhu

Similar Messages

  • How to handle screen resolution in bdc session method.

    hi all,
    how to handle screen resolution in bdc session method.

    Hello,
    Why do need that for? Is it to add rows on a table control??
    If it does, add new rows by using the add button instead of adding into the table control directly to each row.
    Bye
    Gabriel.

  • How to handle the errors in BDC Session method

    Hi All,
    I am uploading Material Master (MM01) records using BDC Session Method.my problem is when i am running the program, all the error records are going to flat file.how can i correcting the error records and after correction how can i re-process the error records.tell me with example.
    i have around 70,000 records in my flat file.

    Hi,
    I am attaching few threads.Hope these will help you.
    If there are any error records in session, all those error records will get poulated in log .SM35 and after the session is completed , u can see error records which can be corrected and reprocessed again
    We have the structures BDCLD and BDCLM, which will capture the log details inthe session. Firstly, sesssion should be processed. After that log will be created. Then caputure the information into an internal table using BDCLM and BDCLD.
    and refer the link.
    error correction in bdc session
    regards
    Madhu

  • Listing BDC session method error records

    Hi ABAP'rs,
                     Can any one help me, how to show error records of BDC session method on the List screen.
                                        Thanks and Regards,
                                                              Param.

    Hi,
    goto sm35 and find the error logs.
    what do you mean by list screen...do you mean in ort output ?
    Regards,
    pankaj singh

  • Bdc session method

    Hi all ,
    where BDC_OK  fields  will store  in which table .
    and also how to reslove the screen resolution  in bdc session method .
    Regards ,
    Kiran .

    hi
    to maintain Screen Resolution just try this
    in the BDC Program source code u will find
    include BDCRECX1 just double click on it,u can see the selection screen of BDC
    and form definitions for Open_Group ,BdcTransaction & CloseGroup,since it is a std include program
    u cannot change it so copy this to a Z include and use that Z include instead of BDCRECX1
    Then go to form BDCTRANSACTION using TCODE
    in that form Declare a workarea(eg: opt) of structure type CTU_PARAMS
    data:   messtab like bdcmsgcoll occurs 0 with header line.
    data : opt type ctu_params.
    pass the values to it
    dismode-> Processing mode (A,E,N,P)
    updmode-> Update mode (L,S,A)
    defsize-> Default Screen Size (X) to maintain Screen Resolution
      opt-dismode = ctumode.
      opt-updmode = cupdate.
      opt-defsize = 'X'.
    if session = 'X'.
        call function 'BDC_INSERT'
         exporting
           tcode                  = tcode
           ctuparams              = 'OPT'
          tables
            dynprotab              = bdcdata.
    else.
        refresh messtab.
        call transaction tcode using bdcdata options from opt messages into messtab.
    endif.
    Regards

  • BDC SESSION METHOD EXPLAINED

    Hi,
    Eplained BDC Session Method
    flat file upload into sap

    ABAP BDC SESSION METHOD SAMPLE CODE
    pool of form routines
    include zmppn001.
    Define BDC Table Structure
    data: begin of itab_bdc_tab occurs 0.
    include structure bdcdata.
    data: end of itab_bdc_tab.
    Input record layout of Leagcy File
    data: begin of itab_xcel occurs 0,
    matnr(18) type c,
    werks(4) type c,
    alnag(2) type c,
    verid(4) type c,
    text1(40) type c,
    bstmi like mkal-bstmi,
    bstma like mkal-bstma,
    adatu(10) type c,
    bdatu(10) type c,
    stlal(2) type c,
    stlan(1) type c,
    serkz(1) type c,
    mdv01(8) type c,
    elpro(4) type c,
    alort(4) type c,
    end of itab_xcel.
    data: begin of lt_pp04_cache occurs 0,
    matnr like itab_xcel-matnr,
    werks like itab_xcel-werks,
    alnag like itab_xcel-alnag,
    plnnr like mapl-plnnr,
    arbpl like crhd-arbpl,
    ktext like crtx-ktext,
    end of lt_pp04_cache.
    data: v_ssnnr(4) type n,
    v_lines_in_xcel like sy-tabix,
    v_ssnname like apqi-groupid,
    v_trans_in_ssn type i,
    wa_xcel LIKE itab_xcel,
    l_tabix like sy-tabix,
    v_matnr like rc27m-matnr,
    v_plnnr like mapl-plnnr,
    v_plnal like mapl-plnal,
    v_tcode like sy-tcode value 'C223',
    v_plnty like plas-plnty value 'R',
    v_objty like crhd-objty value 'A',
    v_plpo_steus like plpo-steus value 'PP04',
    v_verwe like crhd-verwe value '0007'.
    Parameters
    selection-screen: skip 3.
    selection-screen: begin of block 1 with frame.
    parameters: p_name like rlgrap-filename
    default 'C:\My Documents\InputFile.txt'
    obligatory,
    bdc session name prefix
    p_bdcpfx(6) default 'ZPVCRT'
    obligatory,
    number for transction per BDC session
    p_trnssn type i
    default 2000 obligatory,
    retain the BDC session after successfull execution
    p_keep like apqi-qerase
    default 'X',
    user who will be executing BDC session
    p_uname like apqi-userid
    default sy-uname
    obligatory.
    selection-screen: end of block 1.
    possible entry list (F4 dropdown) for input file name
    at selection-screen on value-request for p_name.
    *-SELECT FILE FROM USERS LOCAL PC
    call function 'WS_FILENAME_GET'
    exporting
    DEF_FILENAME = ' '
    def_path = 'C:\Temp\'
    mask = ',.,..'
    mode = 'O'
    title = 'Select File '(007)
    importing
    filename = p_name
    RC =
    exceptions
    inv_winsys = 1
    no_batch = 2
    selection_cancel = 3
    selection_error = 4
    others = 5.
    if sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    endif.
    begin the show
    start-of-selection.
    read data from input file
    perform transfer_xcel_to_itab.
    loop at itab_xcel.
    hang on to xcel line num
    l_tabix = sy-tabix.
    each line in the xcel file marks begining of new prod.version defn
    if num-of-trnas-in-session = 0, create new BDC session
    if v_trans_in_ssn is initial.
    perform bdc_session_open.
    endif.
    begin new bdc script for rtg create trans
    fill in bdc-data for prod.version maintenance screens
    perform bdc_build_script.
    insert the bdc script as a BDC transaction
    perform bdc_submit_transaction.
    keep track of how many BDC transactions were inserted in the BDC
    session
    add 1 to v_trans_in_ssn.
    if the user-specified num of trans in BDC session is reached OR
    if end of input file is reached, close the BDC session
    if v_trans_in_ssn = p_trnssn or
    l_tabix = v_lines_in_xcel.
    perform bdc_session_close.
    clear v_trans_in_ssn.
    endif.
    endloop.
    top-of-page.
    call function 'Z_HEADER'
    EXPORTING
    FLEX_TEXT1 =
    FLEX_TEXT2 =
    FLEX_TEXT3 =
    FORM TRANSFER_XCEL_TO_ITAB *
    Transfer Xcel Spreadsheet to SAP Internal Table *
    form transfer_xcel_to_itab.
    Read the tab-delimited file into itab
    call function 'WS_UPLOAD'
    exporting
    filename = p_name
    filetype = 'DAT'
    IMPORTING
    filelength = flength
    tables
    data_tab = itab_xcel
    exceptions
    conversion_error = 1
    file_open_error = 2
    file_read_error = 3
    invalid_table_width = 4
    invalid_type = 5
    no_batch = 6
    unknown_error = 7
    others = 8.
    if sy-subrc = 0.
    sort the data
    sort itab_xcel by matnr werks.
    clear v_lines_in_xcel.
    if no data in the file - error out
    describe table itab_xcel lines v_lines_in_xcel.
    if v_lines_in_xcel is initial.
    write: / 'No data in input file'.
    stop.
    endif.
    else.
    if file upload failed - error out
    write: / 'Error reading input file'.
    stop.
    endif.
    endform.
    FORM BDC_SESSION_OPEN *
    Open BDC Session *
    form bdc_session_open.
    create bdc session name = prefix-from-selectn-screen + nnnn
    add 1 to v_ssnnr.
    concatenate p_bdcpfx v_ssnnr into v_ssnname.
    open new bdc session
    call function 'BDC_OPEN_GROUP'
    exporting
    client = sy-mandt
    group = v_ssnname
    keep = p_keep
    user = p_uname
    exceptions
    client_invalid = 1
    destination_invalid = 2
    group_invalid = 3
    group_is_locked = 4
    holddate_invalid = 5
    internal_error = 6
    queue_error = 7
    running = 8
    system_lock_error = 9
    user_invalid = 10
    others = 11.
    endform.
    FORM BDC_BUILD_SCRIPT *
    Build BDC *
    form bdc_build_script.
    data: l_arbpl like crhd-arbpl,
    l_text1 like mkal-text1,
    l_mdv01 like mkal-mdv01,
    l_mapl like mapl.
    clear bdc-data itab - begin of new bdc transaction
    clear itab_bdc_tab.
    refresh itab_bdc_tab.
    read material cross reference tables to determine sap part#
    clear : v_matnr, v_plnnr, v_plnal.
    perform read_matnr_cross_ref using itab_xcel-matnr
    itab_xcel-werks
    changing v_matnr.
    determine the version description to use
    if itab_xcel-text1 is initial.
    l_text1 = itab_xcel-verid.
    else.
    l_text1 = itab_xcel-text1.
    endif.
    determine the routing group# and group ctr# to use
    perform read_routing .
    determine the production line to use
    if itab_xcel-mdv01 is initial.
    if not provided in the file then:
    prod line = work ctr on the last PP04 op of the rtg determined above
    perform read_wc_on_last_pp04 using v_plnnr v_plnal
    changing l_mdv01.
    NOTE: when executing the above form\routine, if v_plnnr is initial
    or v_plnal is initial, THEN l_mdv01 will automatically be
    returned blank (ie initial)
    else.
    l_mdv01 = itab_xcel-mdv01.
    endif.
    build bdc script
    perform bdc_build_script_record
    fill in initial screen
    using: 'X' 'SAPLCMFV' '1000',
    ' ' 'BDC_OKCODE' '=ENTE',
    ' ' 'MKAL-WERKS' itab_xcel-werks,
    ' ' 'MKAL-MATNR' v_matnr,
    ' ' 'MKAL_ADMIN-DISPO' space,
    ' ' 'MKAL-PLNNR' space,
    ' ' 'MKAL_ADMIN-STTAG' space,
    ' ' 'MKAL-PLNNG' space,
    ' ' 'MKAL-MDV01' space,
    ' ' 'MKAL-PLNNM' space,
    click create button on initial screen and go to detail screen
    'X' 'SAPLCMFV' '1000',
    ' ' 'BDC_OKCODE' '=CREA',
    fill in the detail screen and go back to initial screen
    'X' 'SAPLCMFV' '2000',
    ' ' 'BDC_OKCODE' '=CLOS',
    ' ' 'MKAL_EXPAND-MATNR' v_matnr,
    ' ' 'MKAL_EXPAND-VERID' itab_xcel-verid,
    ' ' 'MKAL_EXPAND-TEXT1' l_text1,
    ' ' 'MKAL_EXPAND-BSTMI' itab_xcel-bstmi,
    ' ' 'MKAL_EXPAND-BSTMA' itab_xcel-bstma,
    ' ' 'MKAL_EXPAND-ADATU' itab_xcel-adatu,
    ' ' 'MKAL_EXPAND-BDATU' itab_xcel-bdatu,
    ' ' 'MKAL_EXPAND-PLTYG' v_plnty,
    ' ' 'MKAL_EXPAND-PLNNG' v_plnnr,
    ' ' 'MKAL_EXPAND-ALNAG' v_plnal,
    ' ' 'MKAL_EXPAND-STLAL' itab_xcel-stlal,
    ' ' 'MKAL_EXPAND-STLAN' itab_xcel-stlan,
    ' ' 'MKAL_EXPAND-SERKZ' itab_xcel-serkz,
    ' ' 'MKAL_EXPAND-MDV01' l_mdv01,
    ' ' 'MKAL_EXPAND-ELPRO' itab_xcel-elpro,
    ' ' 'MKAL_EXPAND-ALORT' itab_xcel-alort,
    save the production version from initial screen
    'X' 'SAPLCMFV' '1000',
    ' ' 'BDC_OKCODE' '=SAVE'.
    endform.
    FORM BDC_SUBMIT_TRANSACTION *
    Submit BDC Session *
    form bdc_submit_transaction.
    Load BDC script as a trqansction in BDC session
    call function 'BDC_INSERT'
    exporting
    tcode = v_tcode
    tables
    dynprotab = itab_bdc_tab
    exceptions
    internal_error = 01
    not_open = 02
    queue_error = 03
    tcode_invalid = 04.
    endform.
    FORM BDC_BUILD_SCRIPT_RECORD *
    form bdc_build_script_record using dynbegin name value.
    clear itab_bdc_tab.
    if dynbegin = 'X'.
    move: name to itab_bdc_tab-program,
    value to itab_bdc_tab-dynpro,
    'X' to itab_bdc_tab-dynbegin.
    else.
    move: name to itab_bdc_tab-fnam,
    value to itab_bdc_tab-fval.
    shift itab_bdc_tab-fval left deleting leading space.
    endif.
    append itab_bdc_tab.
    endform.
    FORM BDC_SESSION_CLOSE *
    Close BDC Session *
    form bdc_session_close.
    close the session
    call function 'BDC_CLOSE_GROUP'
    exceptions
    not_open = 1
    queue_error = 2
    others = 3.
    skip 2.
    if sy-subrc ne 0.
    write: / 'Error Closing BDC Session ' , 'RETURN CODE: ', sy-subrc.
    else.
    write : / 'Session created:', v_ssnname,
    50 '# of transactions:', v_trans_in_ssn.
    endif.
    endform.
    *& Form read_routing_cache
    *FORM read_routing_cache USING pi_matnr
    pi_werks
    pi_alnag
    pi_verid
    pi_mdv01.
    DATA: BEGIN OF lt_plpo OCCURS 0,
    vornr LIKE plpo-vornr,
    objty LIKE crhd-objty,
    objid LIKE crhd-objid,
    arbpl LIKE crhd-arbpl,
    END OF lt_plpo,
    l_mapl_plnnr LIKE mapl-plnnr.
    determine the routing group#
    CLEAR lt_pp04_cache.
    chk if its in the cache first, if not then get it from MAPL table
    and put it in the cache
    READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
    werks = pi_werks
    alnag = pi_alnag.
    IF sy-subrc = 0.
    do nothing - lt_pp04_cache header line has rtg#
    ELSE.
    get the routing group # from MAPL
    SELECT plnnr INTO l_mapl_plnnr
    FROM mapl UP TO 1 ROWS
    WHERE matnr = pi_matnr AND
    werks = pi_werks AND
    plnty = 'R' AND
    plnal = pi_alnag AND
    loekz = space.
    ENDSELECT.
    put it in the cache internal table
    IF NOT l_mapl_plnnr IS INITIAL.
    lt_pp04_cache-matnr = pi_matnr.
    lt_pp04_cache-werks = pi_werks.
    lt_pp04_cache-alnag = pi_alnag.
    lt_pp04_cache-plnnr = l_mapl_plnnr.
    APPEND lt_pp04_cache.
    ENDIF.
    ENDIF.
    if the rtg# was determined AND
    -- the work center was not determined yet AND
    -- work center was really needed for this line in the input file
    then
    -- read the work center from last PP04 operation on the routing
    -- update the cache accordingly
    IF NOT lt_pp04_cache-plnnr IS INITIAL AND
    lt_pp04_cache-arbpl IS INITIAL AND
    ( pi_verid IS INITIAL OR
    pi_mdv01 IS INITIAL ).
    read the last PP04 operation
    CLEAR lt_plpo.
    REFRESH lt_plpo.
    SELECT vornr eobjty eobjid e~arbpl
    INTO CORRESPONDING FIELDS OF TABLE lt_plpo
    FROM plas AS b
    INNER JOIN plpo AS c
    ON bplnty = cplnty AND
    bplnnr = cplnnr AND
    bzaehl = czaehl
    INNER JOIN crhd AS e
    ON carbid = eobjid
    WHERE b~plnty = v_plnty AND
    b~plnnr = lt_pp04_cache-plnnr AND
    b~plnal = lt_pp04_cache-alnag AND
    c~loekz = space AND
    c~steus = v_plpo_steus AND
    e~objty = v_objty AND
    e~werks = lt_pp04_cache-werks AND
    e~verwe = v_verwe.
    SORT lt_plpo BY vornr DESCENDING.
    READ TABLE lt_plpo INDEX 1.
    IF NOT lt_plpo-arbpl IS INITIAL.
    lt_pp04_cache-arbpl = lt_plpo-arbpl.
    read work center description
    SELECT SINGLE ktext INTO lt_pp04_cache-ktext
    FROM crtx WHERE objty = lt_plpo-objty AND
    objid = lt_plpo-objid AND
    spras = sy-langu.
    the following read will get the index of the correct record to be
    updated in the cache
    READ TABLE lt_pp04_cache
    WITH KEY matnr = pi_matnr
    werks = pi_werks
    alnag = pi_alnag.
    MODIFY lt_pp04_cache
    INDEX sy-tabix
    TRANSPORTING arbpl ktext.
    ENDIF.
    ENDIF.
    *ENDFORM. " read_last_pp04_operation_cache
    *& Form read_routing
    form read_routing.
    data: begin of lt_mapl occurs 0,
    plnnr like mapl-plnnr,
    plnal like mapl-plnal,
    end of lt_mapl,
    l_arbpl like crhd-arbpl.
    get all the rtg# and grp ctr# from MAPL
    select plnnr plnal
    into corresponding fields of table lt_mapl
    from mapl
    where matnr = v_matnr and
    werks = itab_xcel-werks and
    plnty = v_plnty and "Rate Routing
    loekz = space. "with del flag = OFF
    sort lt_mapl by plnal.
    if not itab_xcel-verid is initial.
    if the verid=0001 then use the 1st good rtg-grp# and grp-ctr#
    if itab_xcel-verid = '0001'.
    read table lt_mapl index 1.
    v_plnnr = lt_mapl-plnnr.
    v_plnal = lt_mapl-plnal.
    else.
    if the verid<>0001 then use the rtg-grp# and grp-ctr# of the routing
    whose work center on the last PP04 operation matches the given verid
    loop at lt_mapl.
    clear l_arbpl.
    get the work center from the last PP04 operation
    perform read_wc_on_last_pp04 using lt_mapl-plnnr
    lt_mapl-plnal
    changing l_arbpl.
    if itab_xcel-verid = l_arbpl.
    v_plnnr = lt_mapl-plnnr.
    v_plnal = lt_mapl-plnal.
    exit.
    endif.
    endloop.
    endif.
    else.
    do nothing
    endif.
    For version IDs that are other then '0000' or 'ZWIP' :--
    if itab_xcel-verid NE '0000' and
    itab_xcel-verid NE 'ZWIP'.
    if routing group# or group counter was not determined, make the
    valid-to date 99/99/9999 so that the BDC, on execution, errors out.
    if v_plnnr is initial or
    v_plnal is initial.
    itab_xcel-bdatu = '99/99/9999'.
    endif.
    endif.
    determine the routing group#
    CLEAR lt_pp04_cache.
    chk if its in the cache first, if not then get it from MAPL table
    and put it in the cache
    READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
    werks = pi_werks
    alnag = pi_alnag.
    IF sy-subrc = 0.
    do nothing - lt_pp04_cache header line has rtg#
    ELSE.
    get the routing group # from MAPL
    put it in the cache internal table
    IF NOT l_mapl_plnnr IS INITIAL.
    lt_pp04_cache-matnr = pi_matnr.
    lt_pp04_cache-werks = pi_werks.
    lt_pp04_cache-alnag = pi_alnag.
    lt_pp04_cache-plnnr = l_mapl_plnnr.
    APPEND lt_pp04_cache.
    ENDIF.
    ENDIF.
    if the rtg# was determined AND
    -- the work center was not determined yet AND
    -- work center was really needed for this line in the input file
    then
    -- read the work center from last PP04 operation on the routing
    -- update the cache accordingly
    IF NOT lt_pp04_cache-plnnr IS INITIAL AND
    lt_pp04_cache-arbpl IS INITIAL AND
    ( pi_verid IS INITIAL OR
    pi_mdv01 IS INITIAL ).
    read the last PP04 operation
    CLEAR lt_plpo.
    REFRESH lt_plpo.
    SELECT vornr eobjty eobjid e~arbpl
    INTO CORRESPONDING FIELDS OF TABLE lt_plpo
    FROM plas AS b
    INNER JOIN plpo AS c
    ON bplnty = cplnty AND
    bplnnr = cplnnr AND
    bzaehl = czaehl
    INNER JOIN crhd AS e
    ON carbid = eobjid
    WHERE b~plnty = v_plnty AND
    b~plnnr = lt_pp04_cache-plnnr AND
    b~plnal = lt_pp04_cache-alnag AND
    c~loekz = space AND
    c~steus = v_plpo_steus AND
    e~objty = v_objty AND
    e~werks = lt_pp04_cache-werks AND
    e~verwe = v_verwe.
    SORT lt_plpo BY vornr DESCENDING.
    READ TABLE lt_plpo INDEX 1.
    IF NOT lt_plpo-arbpl IS INITIAL.
    lt_pp04_cache-arbpl = lt_plpo-arbpl.
    read work center description
    SELECT SINGLE ktext INTO lt_pp04_cache-ktext
    FROM crtx WHERE objty = lt_plpo-objty AND
    objid = lt_plpo-objid AND
    spras = sy-langu.
    the following read will get the index of the correct record to be
    updated in the cache
    READ TABLE lt_pp04_cache
    WITH KEY matnr = pi_matnr
    werks = pi_werks
    alnag = pi_alnag.
    MODIFY lt_pp04_cache
    INDEX sy-tabix
    TRANSPORTING arbpl ktext.
    ENDIF.
    ENDIF.
    endform. " read_last_pp04_operation_cache
    *& Form read_wc_on_last_pp04
    form read_wc_on_last_pp04 using pi_plnnr
    pi_plnal
    changing pe_arbpl.
    data: begin of lt_plpo occurs 0,
    vornr like plpo-vornr,
    objty like crhd-objty,
    objid like crhd-objid,
    arbpl like crhd-arbpl,
    end of lt_plpo.
    get all the PP04 operations for the given rtg# & grp-ctr#
    select vornr eobjty eobjid e~arbpl
    into corresponding fields of table lt_plpo
    from plas as b
    inner join plpo as c
    on bplnty = cplnty and
    bplnnr = cplnnr and
    bzaehl = czaehl
    inner join crhd as e
    on carbid = eobjid
    where b~plnty = v_plnty and "Rate Routing
    b~plnnr = pi_plnnr and
    b~plnal = pi_plnal and
    c~loekz = space and "Oper Del Flag = OFF
    c~steus = v_plpo_steus and "PP04
    e~objty = v_objty. "WC Obj Type = 'A'
    read the last operation
    sort lt_plpo by vornr descending.
    read table lt_plpo index 1.
    pe_arbpl = lt_plpo-arbpl.
    endform.
    Regards.

  • Question in BDC session method.

    Hi guys,
    I am trying to upload BOM using BDC session method.
    While doing this, i have learnt the steps by heart. But i do not understrand the logic behind the steps. For example, why do we include this statement
    Data: IT-BDC like BDCDATA occurs 0 with headerline.
    What if we don't include this statement?
    Moderator message: sorry, these forums are not targeted to provide step by step guides to beginners, please search for available information, take courses, etc.
    locked by: Thomas Zloch on Sep 10, 2010 1:06 PM

    Hello Dhirendra,
    Thanks for immediate reply. I want to understand BDC method conceptually. What exactly happens by performing each step.
    I am putting up the BDC i made. I copied some of the code from here and there. It works fine but i don't understand the purpose of BDCDATA,
    call transaction 'cs01'
    and form bdc_dynpro and form bdc_field.
    I am quite new to ABAP. Please don't mind if i ask dumb questions.
    I am unable to understand how control flows through the code logic.
    report ZBDCFORCS01
           no standard page heading line-size 255.
    *include bdcrecx1.
    DATA: IT_BDC LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
          IT_MSGCOLL LIKE BDCMSGCOLL OCCURS 0.
    TYPES TRUXS_T_TEXT_DATA(4096) TYPE C OCCURS 0.
    DATA: I_TAB_RAW_DATA TYPE TRUXS_T_TEXT_DATA.
    DATA: BEGIN OF ITAB OCCURS 0,
          MATNR(18),
          WERKS(4),
          STLAN(1),
          IDNRK(18),
          MENGE(20),
          END OF ITAB.
    SELECTION-SCREEN: BEGIN OF BLOCK b1.
      PARAMETERS: CS01FILE TYPE RLGRAP-FILENAME.
    SELECTION-SCREEN: END OF BLOCK b1.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR CS01FILE.
      CALL FUNCTION 'F4_FILENAME'
       EXPORTING
         PROGRAM_NAME        = SYST-CPROG
         DYNPRO_NUMBER       = SYST-DYNNR
         FIELD_NAME          = ' '
       IMPORTING
         FILE_NAME           = CS01FILE
    start-of-selection.
    CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
      EXPORTING
      I_FIELD_SEPERATOR          =
      I_LINE_HEADER              =
        I_TAB_RAW_DATA             = I_TAB_RAW_DATA
        I_FILENAME                 = CS01FILE
      TABLES
        I_TAB_CONVERTED_DATA       = ITAB[]
    EXCEPTIONS
       CONVERSION_FAILED          = 1
       OTHERS                     = 2
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    *perform open_group.
    LOOP AT ITAB.
    perform bdc_dynpro      using 'SAPLCSDI' '0100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RC29N-STLAN'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'RC29N-MATNR'
                                 '1400-500'.
    itab-matnr.
    perform bdc_field       using 'RC29N-WERKS'
                                 '1000'.
    itab-werks.
    perform bdc_field       using 'RC29N-STLAN'
                                 '1'.
    itab-stlan.
    perform bdc_field       using 'RC29N-DATUV'
                                  '10.09.2010'.
    perform bdc_dynpro      using 'SAPLCSDI' '0110'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'RC29K-BMENG'
                                  '1'.
    perform bdc_field       using 'RC29K-STLST'
                                  '1'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RC29K-EXSTL'.
    perform bdc_dynpro      using 'SAPLCSDI' '0111'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RC29K-LABOR'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_dynpro      using 'SAPLCSDI' '0140'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RC29P-MENGE(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'RC29P-IDNRK(01)'
                                 '1300-320'.
    ITAB-IDNRK.
    perform bdc_field       using 'RC29P-IDNRK(02)'
                                 '1300-312'.
    ITAB-IDNRK.
    perform bdc_field       using 'RC29P-MENGE(01)'
                                 '2'.
    ITAB-MENGE.
    perform bdc_field       using 'RC29P-MENGE(02)'
                                 '2'.
    ITAB-MENGE.
    perform bdc_dynpro      using 'SAPLCSDI' '0130'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RC29P-POSNR'.
    perform bdc_field       using 'RC29P-POSNR'
                                  '0010'.
    perform bdc_field       using 'RC29P-IDNRK'
                                  '1300-320'.
    perform bdc_field       using 'RC29P-MENGE'
                                  '2'.
    perform bdc_field       using 'RC29P-MEINS'
                                  'PC'.
    perform bdc_dynpro      using 'SAPLCSDI' '0131'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RC29P-POTX1'.
    perform bdc_field       using 'RC29P-SANKA'
                                  'X'.
    perform bdc_dynpro      using 'SAPLCSDI' '0130'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RC29P-POSNR'.
    perform bdc_field       using 'RC29P-POSNR'
                                  '0020'.
    perform bdc_field       using 'RC29P-IDNRK'
                                  '1300-312'.
    perform bdc_field       using 'RC29P-MENGE'
                                  '2'.
    perform bdc_field       using 'RC29P-MEINS'
                                  'PC'.
    perform bdc_dynpro      using 'SAPLCSDI' '0131'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RC29P-POTX1'.
    perform bdc_field       using 'RC29P-SANKA'
                                  'X'.
    perform bdc_dynpro      using 'SAPLCSDI' '0140'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RC29P-POSNR(01)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_dynpro      using 'SAPLCSDI' '0140'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RC29P-POSNR(01)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=FCBU'.
    perform bdc_transaction using 'CS01'.
    *perform close_group.
    CALL TRANSACTION 'CS01' USING IT_BDC
                MODE 'A'
                UPDATE 'S'
                MESSAGES INTO IT_MSGCOLL.
    REFRESH IT_BDC.           
    ENDLOOP.
    FORM BDC_DYNPRO USING PROGRAM_DYNPRO.
      CLEAR IT_BDC.
      BDCDATA-PROGRAM = PROGRAM.
      BDCDATA-DYNPRO = DYNPRO.
      BDCDATA-DYNBEGIN = 'X'.
      APPEND IT_BDC.
    ENDFORM.
    FORM BDC_FIELD USING FNAM FVAL.
      CLEAR BDCDATA.
      BDCDATA-FNAM = FNAM.
      BDCDATA-FVAL = FVAL.
      APPEND BDCDATA.
    ENDFORM.
    Edited by: Yayati6260 on Sep 10, 2010 12:29 PM

  • How do I view ipod music files with out using I tunes?

    I trying to view my Ipod music files without using itunes. But when I conect my Ipod to my pc I can only view contacts, notes, and caladar through the driver.
    How do I view ipod music files with out using I tunes?

    they should be under ur my music folder if u have windows

  • Error in my BDC SESSION METHOD

    Hi,
    I was trying work on BDC SESSION METHOD AND MY TCODE IS XK01.
    Here is my code can some one tell me where i am doing wrong becoz its not giving the output as I expected. And I am uploading a tab delimeter file.
    report ZAN_BDCVENDOR
           no standard page heading line-size 255.
    include bdcrecx1.
    DATA: I_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
    DATA: BEGIN OF RECORD OCCURS 0,
    LIFNR(016),
    BURKS(004),
    EKORG(004),
    KTOKK(004),
    AKONT(010),
    FDGRV(010),
    WAERS(005),
    END OF RECORD.
    start-of-selection.
    perform open_group.
    CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
        filename                      = 'C:\VENDOR.TXT'
    FILETYPE                      = 'ASC'
      tables
        data_tab                      = RECORD
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    LOOP AT RECORD.
    perform bdc_dynpro      using 'SAPMF02K' '0100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'USE_ZAV'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'RF02K-LIFNR'
                                  '8765'.
    perform bdc_field       using 'RF02K-BUKRS'
                                  '1000'.
    perform bdc_field       using 'RF02K-EKORG'
                                  '1000'.
    perform bdc_field       using 'RF02K-KTOKK'
                                  '0001'.
    perform bdc_field       using 'USE_ZAV'
                                  'X'.
    perform bdc_dynpro      using 'SAPMF02K' '0210'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'LFB1-FDGRV'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=UPDA'.
    perform bdc_field       using 'LFB1-AKONT'
                                  '160000'.
    perform bdc_field       using 'LFB1-FDGRV'
                                  'A1'.
    perform bdc_dynpro      using 'SAPMF02K' '0310'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'LFM1-WAERS'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=UPDA'.
    perform bdc_field       using 'LFM1-WAERS'
                                  'usd'.
    perform bdc_transaction using 'XK01'.
    ENDLOOP.
    perform close_group.
                  CALL FUNCTION 'BDC_OPEN_GROUP'
                   EXPORTING
                    CLIENT                    = SY-MANDT
                    DEST                      = FILLER8
                     GROUP                     = 'SESSION1'
                    HOLDDATE                  = FILLER8
                    KEEP                      = FILLER1
                     USER                      = SY-UNAME
                    RECORD                    = FILLER1
                    PROG                      = SY-CPROG
                  IMPORTING
                    QID                       =
                  EXCEPTIONS
                    CLIENT_INVALID            = 1
                    DESTINATION_INVALID       = 2
                    GROUP_INVALID             = 3
                    GROUP_IS_LOCKED           = 4
                    HOLDDATE_INVALID          = 5
                    INTERNAL_ERROR            = 6
                    QUEUE_ERROR               = 7
                    RUNNING                   = 8
                    SYSTEM_LOCK_ERROR         = 9
                    USER_INVALID              = 10
                    OTHERS                    = 11
                  IF sy-subrc <> 0.
                  WRITE 'ERROR IN OPEN_GROUP'.
                  ENDIF.
                   CALL FUNCTION 'BDC_INSERT'
                   EXPORTING
                     TCODE                  = TCODE
                     POST_LOCAL             = NOVBLOCAL
                     PRINTING               = NOPRINT
                     SIMUBATCH              = ' '
                     CTUPARAMS              = ' '
                     TABLES
                       dynprotab              = I_BDCDATA
                   EXCEPTIONS
                     INTERNAL_ERROR         = 1
                     NOT_OPEN               = 2
                     QUEUE_ERROR            = 3
                     TCODE_INVALID          = 4
                     PRINTING_INVALID       = 5
                     POSTING_INVALID        = 6
                     OTHERS                 = 7
                   IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
                   ENDIF.
                   CALL FUNCTION 'BDC_CLOSE_GROUP'
                   EXCEPTIONS
                     NOT_OPEN          = 1
                     QUEUE_ERROR       = 2
                     OTHERS            = 3
                   IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
                   ENDIF.
    I appreciate

    Hi,
    i guess, the error is due to, u didnt pass the TCODE parameter in BDC_INSERT FM.
    Try by passing it...
    CALL FUNCTION 'BDC_INSERT'
    EXPORTING
    TCODE = TCODE*
    POST_LOCAL = NOVBLOCAL
    PRINTING = NOPRINT
    SIMUBATCH = ' '
    CTUPARAMS = ' '
    TABLES
    dynprotab = I_BDCDATA
    EXCEPTIONS
    INTERNAL_ERROR = 1
    NOT_OPEN = 2
    QUEUE_ERROR = 3
    TCODE_INVALID = 4
    PRINTING_INVALID = 5
    POSTING_INVALID = 6
    OTHERS = 7
    Hope it works!!
    Regards,
    Pavan

  • Creation of Material using BDC Session method & global class

    Hi
    Creation of Material using BDC Session method & global class by using oops.
    can anyone plz help me out

    Hi,
    it looks like it's not possible to call this BAPI wihtout material number. Here is a quote from BAPI documentation.
    When creating material master data, you must transfer the material
    number, the material type, and the industry sector to the method. You
    must also enter a material description and its language.
    Cheers

  • Creating Sales order texts while using BDC session method is not working

    Hi All,
    I have an existing program which creates sales order using BDC session method.( Actual program uses BAPI to create sales order and in case if any error occurs during creation of sales order BDC session is generated so that user can process it later and i am facing issues in this part of code where it uses BDC)
    I wanted to modify this BDC sesion  to update the sales order text also. I tried recording VA01 for creationg sales order text unfortunatly it is not capturing the data i am entering in the text fields.
    Please suggest if there is any way to create sales order using BDC.
    Regards
    Sheeba

    Hi Madhu,
    '=TP_CREATE' is the OK code i am getting for creating TEXTS. But the text entered are not captured in BDC.
    Part of BDC program generated for cretaing sales order texts.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=%_GC 128 22'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_CREATE'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=%_GC 128 22'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_CREATE'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/EBACK'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=SICH'.
    Regards,
    Sheeba

  • Problem in bdc session method for tcode FS00

    Hi Experts,
    problem in bdc session method, when i run this program no output is shown.
    Even it is not calling the transaction.
    code as follows.
    *& Report  Z_GL_MASTER
    *& CATEGORY         =  BDC.
    *& DESCRIPTION      =  UPLOADING G/L MASTER RECORDS.
    *& TECHNICAL CONST  =  FRANCIS REDDY.
    *& FUNTIONAL CONST  =  FICO.
    REPORT  Z_GL_MASTER.
    *& Internal  Table
    DATA : BEGIN OF IT_UPLOAD OCCURS 0,
           SAKNR LIKE  GLACCOUNT_SCREEN_KEY-SAKNR,          " ACCOUNT NUMBER.
           BUKRS LIKE  GLACCOUNT_SCREEN_KEY-BUKRS,          " COMPANY CODE.
           KTOKS LIKE GLACCOUNT_SCREEN_COA-KTOKS,           " ACCOUNT GROUP.
           XPLACCT LIKE GLACCOUNT_SCREEN_COA-XPLACCT,       " P&L STATEMEMENT.
           GVTYP LIKE  GLACCOUNT_SCREEN_COA-GVTYP,          " P&L STATEMENT TYPE.
           XBILK LIKE GLACCOUNT_SCREEN_COA-XBILK,           " BALANCE SHEET STATEMENT
           SHORT LIKE GLACCOUNT_SCREEN_COA-TXT20_ML,        " SHORT TEXT.
           LONG LIKE GLACCOUNT_SCREEN_COA-TXT50_ML,         " LONG TEXT.
           WAERS LIKE GLACCOUNT_SCREEN_CCODE-WAERS,         " ACCOUNT CURRENCY.
           XSALH LIKE GLACCOUNT_SCREEN_CCODE-XSALH,         " ONLY BALANCES IN LOCAL CURRENCY.
           MITKZ LIKE GLACCOUNT_SCREEN_CCODE-MITKZ,         " RECONCILATION ACCOUNT FOR ACCOUNT TYPEGLACCOUNT_SCREEN_CCODE-MITKZ
           XOPVW LIKE GLACCOUNT_SCREEN_CCODE-XOPVW,         " OPEN ITEM MANAGEMENT.
           XKRES LIKE GLACCOUNT_SCREEN_CCODE-XKRES,         " LINE ITEM DISPLAY.
           ZUAWA LIKE GLACCOUNT_SCREEN_CCODE-ZUAWA,         " SORT KEY.
           FSTAG LIKE GLACCOUNT_SCREEN_CCODE-FSTAG,         " FIELD STATUS GROUP.
           XGKON LIKE GLACCOUNT_SCREEN_CCODE-XGKON,         " RELAVENT CASH FLOW.
           END OF IT_UPLOAD.
    *& Internal  Table FOR BDC DATA.
    DATA : IT_BDCDATA TYPE  BDCDATA OCCURS 0  WITH HEADER LINE.
    *& DATA DECLARATIONS.
    DATA : V_FILE LIKE RLGRAP-FILENAME.
    *&  SELECTION SCREEN.
    PARAMETER : P_FILE LIKE V_FILE.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
         PERFORM GET_FILENAME.
    START-OF-SELECTION.
          PERFORM UPLOAD_DATA.
          PERFORM BDCDATA_OPEN.
          PERFORM BDC_POPULATE.
          PERFORM BDC_CLOSE.
    *&      Form  GET_FILENAME
    form GET_FILENAME .
      CALL FUNCTION 'F4_FILENAME'
       EXPORTING
         PROGRAM_NAME        = SYST-CPROG
         DYNPRO_NUMBER       = SYST-DYNNR
         FIELD_NAME          = 'P_FILE'
       IMPORTING
         FILE_NAME           = P_FILE.
    endform.                    " GET_FILENAME
    *&      Form  UPLOAD_DATA
    form UPLOAD_DATA .
    CALL FUNCTION 'WS_UPLOAD'
    EXPORTING
       FILENAME                      =  P_FILE
       FILETYPE                      = 'DAT'
      TABLES
        data_tab                     = IT_UPLOAD.
    endform.                    " UPLOAD_DATA
    *&      Form  BDCDATA_OPEN
       FORM FOR BDC_OPEN_GROUP.
    form BDCDATA_OPEN .
    CALL FUNCTION 'BDC_OPEN_GROUP'
    EXPORTING
       CLIENT                    = SY-MANDT
       GROUP                     = 'GLMASTER'
       HOLDDATE                  = SY-DATUM
       KEEP                      = 'X'
       USER                      = SY-UNAME.
    endform.                    " BDCDATA_OPEN
    *&      Form  BDC_POPULATE
      POPULATING BDC DATA .
    form BDC_POPULATE .
    loop at it_upload.
    PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
    PERFORM BDC_SUB2 USING 'BDC_OKCODE' '=ACC_CRE'.
    PERFORM BDC_SUB2 USING 'BDC_CURSOR' 'GLACCOUNT_SCREEN_KEY-SAKNR'.
    PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_KEY-SAKNR'    IT_UPLOAD-SAKNR.
    PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_KEY-BUKRS'    IT_UPLOAD-BUKRS.
    PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
    PERFORM BDC_SUB2 USING 'BDC_OKCODE' '=2102_GROUP'.
    PERFORM BDC_SUB2 USING 'BDC_CURSOR' 'GLACCOUNT_SCREEN_COA-KTOKS'.
    PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-KTOKS'    IT_UPLOAD-KTOKS.
    PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-XPLACCT'  IT_UPLOAD-XPLACCT.
    PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
    PERFORM BDC_SUB2 USING 'BDC_OKCODE' '=2102_BS_PL'.
    PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-GVTYP'    IT_UPLOAD-GVTYP.
    PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-XBILK'    IT_UPLOAD-XBILK.
    PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
    PERFORM BDC_SUB2 USING 'BDC_CURSOR' 'GLACCOUNT_SCREEN_COA-TXT20_ML'.
    PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-TXT20_ML' IT_UPLOAD-SHORT.
    PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-TXT50_ML' IT_UPLOAD-LONG.
    PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
    PERFORM BDC_SUB2 USING  'BDC_OKCODE' '=TAB02'.
    PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-WAERS'  IT_UPLOAD-WAERS.
    PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-XSALH'  IT_UPLOAD-XSALH.
    PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-MITKZ'  IT_UPLOAD-MITKZ.
    PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-XOPVW'  IT_UPLOAD-XOPVW.
    PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-XKRES'  IT_UPLOAD-XKRES.
    PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-ZUAWA'  IT_UPLOAD-ZUAWA.
    PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
    PERFORM BDC_SUB2 USING 'BDC_OKCODE' '=TAB03'.
    PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-FSTAG' IT_UPLOAD-FSTAG.
    PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-XGKON' IT_UPLOAD-XGKON.
    CALL FUNCTION 'BDC_INSERT'
      EXPORTING
        TCODE                  = 'FS00'
       TABLES
         dynprotab              = IT_BDCDATA.
    endloop.
    endform.                    " BDC_POPULATE
    *&      Form  BDC_CLOSE
    FORM FOR CLOSING BDC_GROUP
    form BDC_CLOSE .
    CALL FUNCTION 'BDC_CLOSE_GROUP'.
    endform.                    " BDC_CLOSE
    *&      Form  BDC_SUB1
       FORM FOR BDCDATA.
    form BDC_SUB1   USING  A  B  C.
    CLEAR  IT_BDCDATA.
    IT_BDCDATA-DYNBEGIN = A.
    IT_BDCDATA-PROGRAM =  B.
    IT_BDCDATA-DYNPRO =   C.
    APPEND IT_BDCDATA.
    endform.                    " BDC_SUB1
    *&      Form  BDC_SUB2
          text
    form BDC_SUB2   USING  A  B.
    CLEAR  IT_BDCDATA.
      IT_BDCDATA-FNAM = A.
      IT_BDCDATA-FVAL = B.
      APPEND IT_BDCDATA.
    endform.                    " BDC_SUB2
    Points will be  rewarded.
    Thanks in advance.
    Francis.

    Hi,
    Once the program is executed..It will a BDC session..
    THen you have to use the transaction SM35..To process the BDC session..
    Thanks,
    Naren

  • BDC Session method (sample code OR  document)

    Hi Friends,
    I need BDC Session method sample program to practice. or realted document. plz help me out.
    Regards & Thanks
    Kali Pramod

    Hi,
      Goto transaction SHDB record a Transaction Completly and then save it and click create program this creates program using Call Transaction and Session Method, if you go through the program you can know the complete process.
      Hope this could be of little help.
    Thanks,
    Prashanth

  • How is table control data handled in Session Method?

    Hi Friends,
    Can any1 plz tell me how is table control data handled in Session Method.
    In Call tran we do it by count. But how in Session Method?
    Thank you.
    Regards,
    Varun.

    Hi,
    u can do it by both methods. u can check out this program. u need to comment the performs of table control fields and write ur own perform statements.And u have to declare the table control fields as separate internal tables.
    report zcustomer_change_bict
           no standard page heading line-size 255.
    include bdcrecx1.
    data: begin of it_record occurs 0,
            kunnr like rf02d-kunnr,
            d0360 like rf02d-d0360,
            anred(30) type c,
            name1(35) type c,
            namev(35) type c,
            telf1(35) type c,
            abtnr(10) type c,
          end of it_record.
    data: begin of it_knvk1 occurs 0,
          anred like knvk-anred,
          end of it_knvk1.
    data: begin of it_knvk2 occurs 0,
          name1 like knvk-name1,
          end of it_knvk2.
    data: begin of it_knvk3 occurs 0,
          namev like knvk-namev,
          end of it_knvk3.
    data: begin of it_knvk4 occurs 0,
          telf1 like knvk-telf1,
          end of it_knvk4.
    data: begin of it_knvk5 occurs 0,
          abtnr like knvk-abtnr,
          end of it_knvk5.
    data : fld(20) type c,
           cnt(2) type n.
    start-of-selection.
      call function 'GUI_UPLOAD'
        exporting
          filename                      = 'C:\CUSTCH.TXT'
         filetype                      = 'ASC'
        has_field_separator            = 'X'
        tables
          data_tab                      = it_record
    exceptions
       file_open_error               = 1
       file_read_error               = 2
       no_batch                      = 3
       gui_refuse_filetransfer       = 4
       invalid_type                  = 5
       no_authority                  = 6
       unknown_error                 = 7
       bad_data_format               = 8
       header_not_allowed            = 9
       separator_not_allowed         = 10
       header_too_long               = 11
       unknown_dp_error              = 12
       access_denied                 = 13
       dp_out_of_memory              = 14
       disk_full                     = 15
       dp_timeout                    = 16
       others                        = 17
      if sy-subrc <> 0.
        message id sy-msgid type sy-msgty number sy-msgno
                with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      endif.
      perform open_group.
      loop at it_record.
        refresh bdcdata.
        refresh: it_knvk1,it_knvk2,it_knvk3,it_knvk4,it_knvk5.
        split it_record-anred at ',' into table it_knvk1.
        split it_record-name1 at ',' into table it_knvk2.
        split it_record-namev at ',' into table it_knvk3.
        split it_record-telf1 at ',' into table it_knvk4.
        split it_record-abtnr at ',' into table it_knvk5.
    screen 101
        perform bdc_dynpro      using 'SAPMF02D' '0101'.
        perform bdc_field       using 'BDC_CURSOR'
                                      'RF02D-D0360'.
        perform bdc_field       using 'BDC_OKCODE'
                                      '/00'.
        perform bdc_field       using 'RF02D-KUNNR'
                                      it_record-kunnr.
        perform bdc_field       using 'RF02D-D0360'
                                      it_record-d0360.
    screen 360
        perform bdc_dynpro      using 'SAPMF02D' '0360'.
        perform bdc_field       using 'BDC_CURSOR'
                                      'KNVK-ABTNR(01)'.
        perform bdc_field       using 'BDC_OKCODE'
                                      '=ENTR'.
    *perform bdc_field       using 'KNVK-ANRED(01)'
                                 record-ANRED_01_003.
    *perform bdc_field       using 'KNVK-NAMEV(01)'
                                 record-NAMEV_01_004.
    *perform bdc_field       using 'KNVK-NAME1(01)'
                                 record-NAME1_01_005.
    *perform bdc_field       using 'KNVK-TELF1(01)'
                                 record-TELF1_01_006.
    *perform bdc_field       using 'KNVK-ABTNR(01)'
                                 record-ABTNR_01_007.
        move 1 to cnt.
        loop at it_knvk1 .
          concatenate 'knvk-anred( ' cnt ' ) ' into fld.
          perform bdc_field using fld it_knvk1-anred.
          cnt = cnt + 1.
        endloop.
        move 1 to cnt.
        loop at it_knvk2 .
          concatenate 'knvk-name1( ' cnt ' ) ' into fld.
          perform bdc_field using fld it_knvk2-name1.
          cnt = cnt + 1.
        endloop.
        move 1 to cnt.
        loop at it_knvk3 .
          concatenate 'knvk-namev( ' cnt ' ) ' into fld.
          perform bdc_field using fld it_knvk3-namev.
          cnt = cnt + 1.
        endloop.
        move 1 to cnt.
        loop at it_knvk4 .
          concatenate 'knvk-telf1( ' cnt ' ) ' into fld.
          perform bdc_field using fld it_knvk4-telf1.
          cnt = cnt + 1.
        endloop.
        move 1 to cnt.
        loop at it_knvk5 .
          concatenate 'knvk-abtnr( ' cnt ' ) ' into fld.
          perform bdc_field using fld it_knvk5-abtnr.
          cnt = cnt + 1.
        endloop.
    screen 360
        perform bdc_dynpro      using 'SAPMF02D' '0360'.
        perform bdc_field       using 'BDC_CURSOR'
                                      'KNVK-NAMEV(01)'.
        perform bdc_field       using 'BDC_OKCODE'
                                      '=ENTR'.
        perform bdc_transaction using 'XD02'.
      endloop.
      perform close_group.

  • Converting '.xls' file to '.txt' in BDC Session method

    Hi gurus,
    Happy DIWALIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII------',','
    Please help me in converting '.xls' file to '.txt' in BDC Session method. Is there is any method or function module for this conversion. Please help me with coding.
    Thanks and regards,

    Hi
    File->save as -> Save as type ( text tab delimted.txt) ->Click on yes .
    Now open .txt file -> here data will be tab delimted.
    genrally i use tab delimted file to upload the data.
    Even if you want to programtically then get the data from xls file to Internal table,now use concatenate with comma ,now download it.
    Check the below program :
    Upload xls file and you can see .txt file ( with comma delimted)
    Input ( XLS file )
    aaa 1245 2344 233 qwww
    233 2222 qwww www www
    Output ( .txt file with comma delimted)
    aaa,1245,2344,233,qwww
    233,2222,qwww,www,www
    REPORT ZFII_MISSING_FILE_UPLOAD no standard page heading.
    data : begin of i_text occurs 0,
    text(1024) type c,
    end of i_text.
    Internal table for File data
    data : begin of i_data occurs 0,
    field1(10) type c,
    field2(10) type c,
    field3(10) type c,
    field4(10) type c,
    field5(10) type c,
    end of i_data.
    data : begin of i_download occurs 0,
    text(1024) type c,
    end of i_download.
    data : v_lines type sy-index.
    data : g_repid like sy-repid.
    data v_file type string.
    data: itab like alsmex_tabline occurs 0 with header line.
    data : g_line like sy-index,
    g_line1 like sy-index,
    $v_start_col type i value '1',
    $v_start_row type i value '1',
    $v_end_col type i value '256',
    $v_end_row type i value '65536',
    gd_currentrow type i.
    selection-screen : begin of block blk with frame title text.
    parameters : p_file like rlgrap-filename obligatory.
    selection-screen : end of block blk.
    initialization.
    g_repid = sy-repid.
    at selection-screen on value-request for p_file.
    CALL FUNCTION 'F4_FILENAME'
    EXPORTING
    PROGRAM_NAME = g_repid
    IMPORTING
    FILE_NAME = p_file.
    start-of-selection.
    Uploading the data into Internal Table
    perform upload_data.
    download the file into comma delimted file.
    perform download_data.
    *& Form upload_data
    text
    --> p1 text
    <-- p2 text
    FORM upload_data.
    CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
    EXPORTING
    FILENAME = p_file
    I_BEGIN_COL = $v_start_col
    I_BEGIN_ROW = $v_start_row
    I_END_COL = $v_end_col
    I_END_ROW = $v_end_row
    TABLES
    INTERN = itab
    EXCEPTIONS
    INCONSISTENT_PARAMETERS = 1
    UPLOAD_OLE = 2
    OTHERS = 3.
    IF SY-SUBRC <> 0.
    write:/10 'File '.
    ENDIF.
    if sy-subrc eq 0.
    read table itab index 1.
    gd_currentrow = itab-row.
    loop at itab.
    if itab-row ne gd_currentrow.
    append i_data.
    clear i_data.
    gd_currentrow = itab-row.
    endif.
    case itab-col.
    when '0001'.
    first Field
    i_data-field1 = itab-value.
    second field
    when '0002'.
    i_data-field2 = itab-value.
    Third field
    when '0003'.
    i_data-field3 = itab-value.
    fourth field
    when '0004'.
    i_data-field4 = itab-value.
    fifth field
    when '0005'.
    i_data-field5 = itab-value.
    endcase.
    endloop.
    endif.
    append i_data.
    ENDFORM. " upload_data
    *& Form download_data
    text
    --> p1 text
    <-- p2 text
    FORM download_data.
    loop at i_data.
    concatenate i_data-field1 ',' i_data-field2 ',' i_data-field3 ','
    i_data-field4 ',' i_data-field5 into i_download-text.
    append i_download.
    clear : i_download,
    i_data.
    endloop.
    CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
    BIN_FILESIZE =
    FILENAME =
    'C:\Documents and Settings\smaramreddy\Desktop\fff.txt'
    FILETYPE = 'ASC'
    APPEND = ' '
    WRITE_FIELD_SEPARATOR = ' '
    HEADER = '00'
    TRUNC_TRAILING_BLANKS = ' '
    WRITE_LF = 'X'
    COL_SELECT = ' '
    COL_SELECT_MASK = ' '
    DAT_MODE = ' '
    IMPORTING
    FILELENGTH =
    TABLES
    DATA_TAB = i_download
    EXCEPTIONS
    FILE_WRITE_ERROR = 1
    NO_BATCH = 2
    GUI_REFUSE_FILETRANSFER = 3
    INVALID_TYPE = 4
    NO_AUTHORITY = 5
    UNKNOWN_ERROR = 6
    HEADER_NOT_ALLOWED = 7
    SEPARATOR_NOT_ALLOWED = 8
    FILESIZE_NOT_ALLOWED = 9
    HEADER_TOO_LONG = 10
    DP_ERROR_CREATE = 11
    DP_ERROR_SEND = 12
    DP_ERROR_WRITE = 13
    UNKNOWN_DP_ERROR = 14
    ACCESS_DENIED = 15
    DP_OUT_OF_MEMORY = 16
    DISK_FULL = 17
    DP_TIMEOUT = 18
    FILE_NOT_FOUND = 19
    DATAPROVIDER_EXCEPTION = 20
    CONTROL_FLUSH_ERROR = 21
    OTHERS = 22
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    ENDFORM. " download_data
    Regards
    Pavan

Maybe you are looking for

  • Order Canceled: unable to verify information

    Placed a $30 order last week.  Cancelled immediately "unable to verify information" after getting the order confirmation.  Spent 45 minutes on the phone to be told, "I don't know."  Shipping and Billing info are correct.  The same credit card seems t

  • Best Battery Health not working in Windows 7 after Windows 8 installation

    Hello everybody, I'm having an annoying problem with my G475. It came with Windows 7 installed, and the option "Best Battery Health" was working fine. Then I upgraded to Windows 8 (fresh install) and installed the Energy Management drivers. Since "Be

  • New Mac Mini HDMI version...

    does anyone know what version of HDMI the new mac mini is running? i can't find it anywhere. surely they're running v1.3 at least right?

  • Notification 10.8 fails to open.

    Hi everybody, I am running 10.8.2 on my Macbook Pro (i7) and iMac (intel Core duo). Eveything fine, but... After starting my Macbook Pro the new feature "Notifications" is always gray and I am not able to switch it on again. Sometimes it works, somet

  • How can I export 1080i in best possible quality for internet streaming?

    Sorry, I'm not too knowledgeable about this but I have Final Cut 6.0.4 and use/captured in HD-1080i. What's the best possible way to export this in great quality for internet streaming? What dimensions should I use? Any help would be extremely apprec