How to pass pushbutton values to a function module

Hi all,
I am required to move a subroutine in main program to a function module but I am unable to pass in the pushbutton . How do I do that?
In main program:
SELECTION-SCREEN BEGIN OF BLOCK blk1.
PARAMETERS message(10) TYPE c.
SELECTION-SCREEN SKIP 2.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN PUSHBUTTON 3(5) btn1 user-command cli1 modif id bt1.
SELECTION-SCREEN PUSHBUTTON 8(5) btn2 user-command cli2 modif id bt2.
SELECTION-SCREEN PUSHBUTTON 13(5) btn3 user-command cli3 modif id bt3.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK blk1.
In main program there is many subroutines perform check_button using 'P' or check_button using 'C'.
Form check_button using str type boolean.
IF btn1 = str AND btn2 = str AND btn3 = space.
     btn3 = 'C'.
     disable3 = 'X'.
     count = count + 1.
   ENDIF.
   IF btn1 = str AND btn3 = str AND btn2 = space.
     btn2 = 'C'.
     disable2 = 'X'.
     count = count + 1.
   ENDIF.
   IF btn2 = str AND btn3 = str AND btn1 = space.
     btn1 = 'C'.
     disable1 = 'X'.
     count = count + 1.
   ENDIF.
Endform.
Problem: My function module cannot possible know btn1, btn2 and btn3 values. How do I do it?

Hi,
Please try below:
SELECTION-SCREEN BEGIN OF BLOCK blk1.
PARAMETERS message(10) TYPE c.
SELECTION-SCREEN SKIP 2.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN PUSHBUTTON 3(5) btn1 USER-COMMAND cli1 MODIF ID bt1.
SELECTION-SCREEN PUSHBUTTON 8(5) btn2 USER-COMMAND cli2 MODIF ID bt2.
SELECTION-SCREEN PUSHBUTTON 13(5) btn3 USER-COMMAND cli3 MODIF ID bt3.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK blk1.
DATA : value TYPE char1.
AT SELECTION-SCREEN.
BREAK-POINT.
DATA : value TYPE char1.
IF sy-ucomm = 'CLI1'.
value = '1'.
PERFORM test USING value.
ELSEIF sy-ucomm = 'CLI3'.
value = '3'.
PERFORM test USING value.
ENDIF.
AT SELECTION-SCREEN OUTPUT.
IF sy-ucomm = 'CLI1'.
    value = '1'.
ENDIF.
PERFORM test USING value.
*&      Form test
*       text
*      -->VALUE      text
FORM test USING value .
IF value = '1'.
    BREAK-POINT.
ENDIF.
IF value = '3'.
    BREAK-POINT.
ENDIF.
ENDFORM.                    "
Regards,
VS

Similar Messages

How to get sysnr value in a Function Module

Hi all,
I need to get the sysnr(system number) value of the R/3 system. I execute a RFC function module and need to get the value of sysnr of the system it executes in as a return parameter. Can somebody tell me how to get this value in the function module and return it.
Thanks and Regards,
Pratik

Hello Pratik
The system number has to be defined in the RFC destination. Thus, select on your local system (where you call the RFC function module) the corresponding RFC destination from table <b>RFCDES</b>. In field RFCDES-RFCOPTIONS you will find a string like this:
H=<ip address>,S=21,R=N, ...
S=system number
Regards
Uwe

How to pass select-option filed to Function Module Exporting Parameter

Hi,
    How to pass select-option filed to Function Module Exporting Parameter.
Thanks

Hi,
DATA: BEGIN OF ITAB5_WRK OCCURS 0,
        KUNNR     TYPE KNKK-KUNNR, "CUSTOMER #
        SBGRP     TYPE KNKK-SBGRP, "CREDIT REP
        KLIMK     TYPE KNKK-KLIMK, "CREDIT LIMIT
        NAME1     TYPE KNA1-NAME1, "CUSTOMER NAME
        SKFOR     TYPE KNKK-SKFOR, "TOTAL A/R
        AMT1      TYPE KNKK-SKFOR, "CURRENT
        AMT2      TYPE KNKK-SKFOR,                          "01-30
        AMT3      TYPE KNKK-SKFOR,                          "31-60
        AMT4      TYPE KNKK-SKFOR,                          "61-90
        AMT5      TYPE KNKK-SKFOR,                          "91-120
        AMT6      TYPE KNKK-SKFOR,                          "OVR 120
        BZIRK     TYPE KNVV-BZIRK,
      END OF ITAB5_WRK.
SELECT-OPTIONS P_COMP     FOR T001-BUKRS
SELECT KUNNR SBGRP FROM KNKK
         INTO TABLE ITAB5_WRK
         WHERE SBGRP IN P_REP
           AND KUNNR GE '0001000000'
           AND SKFOR NE 0.
LOOP AT ITAB5_WRK.
    DELETE ADJACENT DUPLICATES FROM ITAB5_WRK COMPARING KUNNR.
ENDLOOP.
PERFORM GET_CREDIT_LIMITS.
*=======================================================================
IF P_DIST NE SPACE.
    LOOP AT ITAB5_WRK.
      SELECT SINGLE * FROM KNVV WHERE KUNNR EQ ITAB5_WRK-KUNNR
                                  AND VKORG EQ P_COMP
                                  AND VTWEG EQ '20'
                                  AND SPART EQ '10'
                                  AND BZIRK IN P_DIST.
      IF SY-SUBRC EQ 0.
        MOVE KNVV-BZIRK TO ITAB5_WRK-BZIRK.
        MODIFY ITAB5_WRK.
      ELSE.
        DELETE ITAB5_WRK.
      ENDIF.
    ENDLOOP.
ENDIF.
*==============================================================
LOOP AT ITAB5_WRK.
    MOVE: 'F/S'            TO WRK-KKBER,
           ITAB5_WRK-KUNNR TO WRK-KUNNR.
    PERFORM AGING.
    ADD: W_SNFAE TO ITAB5_WRK-AMT1,
         W_SFAE1 TO ITAB5_WRK-AMT2,
         W_SFAE2 TO ITAB5_WRK-AMT3,
         W_SFAE3 TO ITAB5_WRK-AMT4,
         W_SFAE4 TO ITAB5_WRK-AMT5,
         W_SFAE5 TO ITAB5_WRK-AMT6,
         W_SFAEL TO ITAB5_WRK-SKFOR,
         W_SNFAE TO ITAB5_WRK-SKFOR.
    MOVE: 'SPEC'            TO WRK-KKBER,
           ITAB5_WRK-KUNNR TO WRK-KUNNR.
    *PERFORM AGING.*
    ADD: W_SNFAE TO ITAB5_WRK-AMT1,
         W_SFAE1 TO ITAB5_WRK-AMT2,
         W_SFAE2 TO ITAB5_WRK-AMT3,
         W_SFAE3 TO ITAB5_WRK-AMT4,
         W_SFAE4 TO ITAB5_WRK-AMT5,
         W_SFAE5 TO ITAB5_WRK-AMT6,
         W_SFAEL TO ITAB5_WRK-SKFOR,
         W_SNFAE TO ITAB5_WRK-SKFOR.
    MODIFY ITAB5_WRK.
ENDLOOP.
FORM AGING.
*CALL FUNCTION 'CUSTOMER_DUE_DATE_ANALYSIS'*
EXPORTING
      BUKRS             = P_COMP
      KKBER             = WRK-KKBER
      KUNNR             = WRK-KUNNR
      RASID             = 'FEND'
      KLIMP             = 'X'
    IMPORTING
      SFAE1             = W_SFAE1
      SFAE2             = W_SFAE2
      SFAE3             = W_SFAE3
      SFAE4             = W_SFAE4
      SFAE5             = W_SFAE5
      SFAE6             = W_SFAE6
      SFAEL             = W_SFAEL
      SNFA1             = W_SNFA1
      SNFA2             = W_SNFA2
      SNFA3             = W_SNFA3
      SNFA4             = W_SNFA4
      SNFA5             = W_SNFA5
      SNFA6             = W_SNFA6
      SNFAE             = W_SNFAE
    EXCEPTIONS
      NO-AGING_SCHEDULE = 1
      NO_TABLE_INPUT    = 2.
CASE SY-SUBRC.
    WHEN 1.
      MESSAGE E999 WITH 'PLEASE ENTER AGING SCHEDULE'.
    WHEN 2.
      MESSAGE E999 WITH 'DO NOTHING ??'.
ENDCASE.
ENDFORM.                    "AGING
Thanks

How to pass BI Query parameters from Function Module

Hi,
We are executing the BI queries using the Function Module "RS_VC_GET_QUERY_VIEW_DATA_FLAT" by passing the query name and the provider information.
Is there a way, to pass the filter parameter values also to the query by using this function module? I am not sure how the VC tool is using this Function Module to call the BI queries and passing the filter values.
Your help is appreciated.
Thanks
Suri

Suryanarayana,
Are you trying to execute a query in batch?. If you want to execute try to look at WRITEQUERY - which is a standard SAP program. You can execute this program directly or you can customize it completely and produce the output in .CSV file.
Hope this helps. Award points if useful.
Goodluck,
Alex (Arthur Samson)

How to pass string value to call function in BIIP FOX?

Dear all,
   In BIIP fox , we can call function module.
   I got a simple test FM like:
FUNCTION ZTESTBPSFM2.
""Local Interface:
*" IMPORTING
*"     REFERENCE(I_X) TYPE STRING
*"     REFERENCE(I_H) TYPE BSP_STRING
*" EXPORTING
*"     REFERENCE(I_Y) TYPE F
ENDFUNCTION.
My FOX is like,
DATA YM TYPE 0CALMONTH.
DATA I_N TYPE F.
DATA J TYPE STRING.
J = 'KKKK'.
FOREACH YM.
CALL FUNCTION ZTESTBPSFM2
EXPORTING
I_X = J
IMPORTING
I_Y = I_N.
{ZREV , YM} = I_N.
ENDFOR.
When I run the function , I got a error .
"Types of parameter I_X (S) and variable J(C) are inconsistent "
Does anyone know which string data type I should use in function module?
Best Regards,
Jeff

Hi Jeff
this is a bug. Please open a customer message so SAP support can correct the issue.
Regards,
Marc
SAP NetWeaver RIG

How to pass dynamic logical expression to function module

Hi,
I'm using FM META_READ_TABLE as below:
As mentioned above im using META_READ_TABLE FM to get company codes from CSKS table of ECC. Below is the code im using:
   DATA:i_opt type STANDARD TABLE OF RFC_DB_OPT, i_fld type STANDARD TABLE OF RFC_DB_FLD,
       i_res type STANDARD TABLE OF TAB512.
Constants:   c_expr(72) TYPE c VALUE 'KOSTL EQ COST_CTR', c_fld(5) TYPE c VALUE 'BUKRS'.
w_opt-text = c_expr.
w_fld-FIELDNAME = c_fld.
append: w_opt to i_opt,
        w_fld to i_fld.
data i_control type STANDARD TABLE OF BBP_CONTROL_RECORD.
**&&--Get Co code from ECC (CSKS table)
CALL FUNCTION 'META_READ_TABLE'
EXPORTING
    QUERY_TABLE          = c_table
*   DELIMITER            = ' '
*   NO_DATA              = ' '
*   ROWSKIPS             = '0'
*   ROWCOUNT             = '0'
    LOGICAL_SYSTEM       = v1_logsys
TABLES
    OPTIONS              = i_opt
    FIELDS               = i_fld
    DATA                 = i_res
    CONTROL_RECORD       = i_control.
however it is giving me 'Communication Error' while executing this piece of code. I guess the problem here is with passing query to i_opt table. obviously the way im doing this is wrong and it has to be dynamic. Could anybody please give me idea how to execute fm with dynamic query i.e., 'KOSTL EQ COST_CTR' where COST_CTR is cost center and an importing parameter to this.please advise.
Rgds

The "communication error" would seem more likely to be a problem with an RFC call - does 'META_READ_TABLE" call another function in the remote system?
We don't have that function module here (is it SRM?) but you should be able to construct your dynamic "where" something like this (p_kostl is the variable in this example):
data:
    l_where     type text72.
concatenate
    'KOSTL EQ_'
    p_kostl      "variable
    into l_where.
translate l_where using '_ '. "replace underscore with space
Jonathan

How to pass filter values to planning function in Integrated planning

Dear Experts,
I have a input ready query where the variables are filled with authorization objects by user. All variables are defined as multiple single values.
I created a workbook with 3 filter dropdown box - calmonth, company code and version (displayed as text). In the filter drop down box the user selects the company code, version and calmonth for planning. I would like to pass the selected filter values to a planning funciton. How can we pass these selected single filter values to a planning funciton?
Note: I am able to reference cells for variables that are not in filter (for eg: revaluation function with this document https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0881371-78a1-2910-f0b8-af3e184929be).
Thanks,
Gnana

Hi,
Your requirement sounds similar to example given by SAP
[http://help.sap.com/saphelp_nw70/helpdata/en/45/e641e4c61256dee10000000a114a6b/content.htm]
If you do not want the from value be selected, and its already decided, then gofor restriction of values in filter than to the variable.
regards,
ravi.

Passing String values in the Function module

Hi
i am using a coustom made RFC, here i am usnig input parameter 'jobnature' of string type of length 720. the values is getting from the portal,
i send a string of length of 720 charater from portal, but inside the RFC only 132 charaters are getting .why it happeded so, what is the solution .
regards
Renjith

Hi renjith,
1. don't give any length in the FM definition.
2. just like this.
STR TYPE STRING
(Tick the checkbox for 'Pass Value')
(Bcos its RFC Enabled)
regards,
amit m.

How to pass multiple values from workbook to planning function ?

Hi,
I have created Planning function in Modeler and it has one parameter(Variable represents = Multiple single values).
When executing the planning function by create planning seq. in the web template : I see value of variable store data like ...
A.) input one value -> V1
B.) input three values -> V1;V2;V3
This function execute completely in web.
However, I want to use the planning function in workbook(Excel).
The value of variable can't input V1;V2;V3... I don't know how to pass multiple values from workbook to parameter(Multiple single values type) in planning function ?
thank you.

Hi,
Please see the attached how to document (page no 16).
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0881371-78a1-2910-f0b8-af3e184929be">how to</a>
Hope this was helpful
thanks

How to pass input value to the IN parameter in a function

Hi ,
I'm new to pl/sql programming.
The below function is used inside a package and the package is invoked in visual studio.
The function uses 2 input parameters.
Out of which 'in_report_parameter_id' value comes thru job processor service 's job request.
The second IN paramter values are hard coded in the function.
I'm not able to understand this.
If the values are hard coded , how to make sure that only the hard coded values are the right ones?
Please anyone could explain to me?
I really dont have good idea about how to pass INPUT parameter to the functions or procedure
Is there any nice document which could give me good understanding about what are the ways or types we could pass values to the input parameter in subprograms?
thanks in advance.
CREATE OR REPLACE FUNCTION get_class_text_str
     in_report_parameter_id IN NUMBER,
     in_which                IN VARCHAR2 DEFAULT 'SELECT'
RETURN VARCHAR2
IS
         end_text            VARCHAR2 (50)   := '';
         my_class_text_str VARCHAR2(10000) := '';
         my_class_value_str VARCHAR2(10000) := '';
     CURSOR class_text(c_1_text VARCHAR2, c_2_text VARCHAR2) IS
     SELECT c_1_text || report_parameters.report_parameter_value
                           || c_2_text
                           || report_parameters.report_parameter_value
                           || '" '
      FROM report_parameters
     WHERE report_parameters.report_parameter_id     = 3690
       AND report_parameters.report_parameter_group = 'CLASS'
       AND report_parameters.report_parameter_name   = 'CLASS'
GROUP BY report_parameters.report_parameter_value
ORDER BY CAST(report_parameters.report_parameter_value AS NUMBER);
BEGIN
     IF (in_which = 'SUM') THEN
          OPEN class_text ( 'SUM(NVL("Class ', '", 0)) "Class ' );
     ELSIF (in_which = 'PERC')THEN
          OPEN class_text ( 'ROUND((("Class ', '" / "Total") * 100), 2) "Class ' );
          end_text := ', DECODE("Total", -1, 0, 100) "Total" ';
     ELSE
          OPEN class_text ( 'SUM(DECODE(bin_id, ', ', bin_value, 0)) "Class ' );
     END IF;
     LOOP
          FETCH class_text INTO my_class_value_str;
          EXIT WHEN class_text%NOTFOUND;
          my_class_text_str := my_class_text_str || ', ' || my_class_value_str;
     END LOOP;
     CLOSE class_text;
     my_class_text_str := my_class_text_str || end_text;
     RETURN my_class_text_str;
END get_class_text_str;
/Edited by: user10641405 on Nov 19, 2009 8:16 AM
Edited by: user10641405 on Nov 19, 2009 8:30 AM

This is not a design I would use, but should work if coded properly. I would probably build a reference cursor query as text and use one open fetch and close.
You have 2 input parameters, in_report_parameter_id and in_which. I could not find where in_report_parameter_id was used in the program, but the value passed in for in_which is being used in IF logic to decide how to open the cursor. After the cursor is open rows are being fetched and eventually the cursor is closed.
The values in_which are compared to are hard-coded. It is the programmer's job to make sure the values listed are the right values and the actions taken are also correct. Your program is assuming that if the first 2 values are not encountered the third one listed is the one you want.
To pass input values to a procedure you merely provide the values as a literal or variable in the call, something like
whatever := get_class_text_str(1,'SELECT');

How to pass default value of argument to stored function?

Hi,
in procedure I don't have to pass all arguments, because I set it with name, but in stored function I have to set arguments with index som I must set all arguments. Some arguments have default value. So how to pass default value?
thx for any comments

It really helps me if someone tell me that it isn't possiblle.
thx.

How to pass a value from the report to a form ( BIT OF URGENT ).

Hi,
I had created a "Form on a Table with Report" on the report I had remove the edit link and set one of the column feilds that functionality. Now I want to know how to pass that value that is clicked ( having hyper link ) on to the form where it runs a SQL query and then displays the reuslts on the form.
Illustrating with an example.
I am having these following columns on the report ( these are the results for the join statement )
JOBNUM JOBNAME DEPTNUMBER SAL EMPNO LNAME FNAME
In the above JOBNUM is having Hyper link as I removed the edit image.
Now this is area I am having problem. When the user clicked on the JOBNUM then on form it should display 20 other columns( pulled from 5 other tables ) which are related to that particualr JOBNUM.
Anybody give me a solution in which area I have to include my SQL statement and how to pass that selected value to that SQL statement.
Cheers,
Krishna

Hi Ron,
I am doing exaclty what you have suggested me but no luck. I started changing the DEMO_CUSTOMERS application to my requirements.The report is working fine and on the report I have created a page attribute to the Hyper linked column and linked that to the page 2 and assign that attribute with #JOBNUM#.
I am able to pass that value on to form when I click on the JOBNUM. But the problem is I am not able to pass that value into the SQL query so that my query pulls 20+ columns on to the Form ( which is second page ).
Small clarification... On the form region it is said FORM NAME and type is HTML is that is the way the APEX was designed or does it need to say region type as FORM.
Thanks for your help in advance.
Cheers,
Krishna.

How to pass a value to a bind variable in a query report in oracle apex

Hi Guys,
I have requirement to send weekly reports via email to some users. The users should receive their own records in the report. The user details is stored in a table. What I am planning to do is to create a report query in oracle apex to generate the report and then run a function/procedure via a scheduler to email the report to respective users. Now my query is ............. is it possible to pass a value (user name) to the report query to pull records of only that user? I know we can have bind variables in the report query but I have no idea how to pass a value for bind variables from a function/procedure.
Can anyone help me on this issue or suggest a better approach?
Thanks,
San

You need to use dynamic sql
But please keep in mind that since you're using Oracle you may be better off posting this in some Oracle forums
This forum is specifically for SQL Server
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

In BADi , How to pass the values between two Method

Hi Experts,
We have two methods in BADis. How to pass the value between two Methods. Can you guys explain me out with one example...
Thanks & Regards,
Sivakumar S

Hi Sivakumar!
Create a function group.
Define global data (there is a similiar menu point to jump to the top include).
Create one or two function modules, with which you can read and write the global data.
In your BADI methods you can access the global data with help of your function modules. It will stay in memory through the whole transaction.
Regards,
Christian

How to pass the value from Sub report to main report

I have un report(mainreport) within a subreport(subreport).
With reporting services, how to pass the value from Sub report to main report?
thanks

Hi Alebet,
With reporting services to pass values from sub report in to main report is not supported directly.
But there are some workarounds through which you can get this .
There are two ways to get this.
1- Put your sub report query into some table. i mean to say through the subreport query get some temporary table.
2- Using this temporary tables data write some Scala function in the data base.
3- Now in your main report query return this scala function as a column.
4- Extract the column value where ever you want in your main report which is getting calculated from the subreport query. so you will be getting the values returned from the subreport in the main report.
This will definitely work fine as i have done some report in this way.
Another way of doing is that
1- prepare another data set with the same query as in sub report in the data tab.
2- then refer this 2nd dataset in your main report .
But better way will be the top one.
Anyway please let me know if you get the solution.
Thanks
Mahasweta

How to pass pushbutton values to a function module

Similar Messages

Maybe you are looking for