How to Pass the Internal table of a report to Smart Form
Hi Experts,
I have one report in which from selection screen i am getting the values from the users, and upon that values i am filling data in to the internal table.
Now i want to pass that internal table data to the smart form
and print that data in the smart form.
So could you pls give me some pseudo code or any steps to achieve it.
Thanks & Regards,
DS
Hi DS,
First of all you need to create a SF and then need to call the FM generated by the FM in your report.
In the SF in the form interface>tables tab>mention the name of the table and its type structure.
Pls note that a new structure has to be created as the same type of your internal table which holds the data.
And the import and export parameters as just the same as in a FM.
Now after you create and activate your SF a FM will be generated (wen u execute your SF you will be taken to this SE37 screen with the name of FM so no probs..)
You can call this FM in your report. Hope this helps.
Ex:
say itab has your final data, and you also want to export a variable var1 to the SF.
after your normal report operations end, call the FM and pass on these data.
say your FM name is FM1.
call function FM1
exporting
var1 = var1
tables
itab1 = itab1.
pls note that in the SF also i gave the same names, it is not mandatory to give the same names.
and as you want to print a table in the smartforms, you need to create a table in the smart forms and then display the data which is quite simple.
Hope this helps...
if you need any further explanations, pls revert...
Regards,
Narendra.
Reward points if helpful!!!
Similar Messages
-
How to pass the internal table defined in program to ALV
Hi Friends,
I have a doubt regaring the ALV's,
How can we pass the internal table defined in the program to ALV by not filling the attribute (I_STRUCTURE_NAME) in the REUSE_ALV_LIST_DISPLAY.
I have tried many ways but unable to pass the structure of the internal table. I am getting the error message "Field Catalog Not Specified......" and its terminating and when i am giving the I_STRUCTURE_NAME = 'INTERNAL-TABLE-NAME' then its displaying a blank screen with all the tool-bars and icons...(No output of internal table data is seen on the screen) .
and when i am passing the DDIC table or structure ( for eg. LFA1) to I_STRUCTURE_NAME then its displaying with any error.
Plaese help in resolving this problem....
Regards
Pradeep GoliHi,
Check this thread which gives example of ALV. This will give you an idea.
Interactive ALV
ashish -
How to pass the internal table data to smartforms
Hi Gurus,
I have a problem in passing the internal table data to the smartforms. In the print program
I get the data into one internal table "LT_PRDLBL1". I am passing this internal table to the other in print program by calling the FM_NAME.
CALL FUNCTION fm_name
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS = T_SSFCTRLOP
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS = T_SSFCOMPOP
USER_SETTINGS = ' '
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
LT_PRDLBL = LT_PRDLBL1
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
In the print program I had defined the internal tables like
Data: lt_prdlbl type standard table of zprdlbl.
Data: Begin of lt_prdlbl1 occurs 0.
include structure zprdlbl.
Data: End of lt_prdlbl1.
How do I define the internal table in the smartform to get the values printed in the smartform?.
<REMOVED BY MODERATOR>
Thanks,
Edited by: Alvaro Tejada Galindo on Apr 21, 2008 1:01 PMNehal,
Thanks for quick response.
In the smartform under the Form Interface->Tables tab
I had defined
LT_PRDLBL LIKE ZPRDLBL. If I define TYPE instead of LIKE I get the error message saying "FLAT TYPES may only be referenced using LIKE for table parameters".
In the main window I have created LOOP, in which I have ticked the internal table and
LT_PRDLBL INTO LT_PRDLBL. In the text node I am passing the values of this internal table
<_PRDLBL-XXXX&.
I am able to get the print but the data is not printing.
Please help me with this.
Thanks, -
How to submit a report ,Passing the internal tables from parent report
How to submit a report ,Passing the internal tables from the parent report ?
The SUBMIT statement executes a report from within a report. i.e. you could have a drill-down which
calls another report. Can only execute reports of type '1'.
*Code used to execute a report
SUBMIT Zreport.
*Code used to populate 'select-options' & execute report
DATA: seltab type table of rsparams,
seltab_wa like line of seltab.
seltab_wa-selname = 'PNPPERNR'.
seltab_wa-sign = 'I'.
seltab_wa-option = 'EQ'.
load each personnel number accessed from the structure into
parameters to be used in the report
loop at pnppernr.
seltab_wa-low = pnppernr-low.
append seltab_wa to seltab.
endloop.
SUBMIT zreport with selection-table seltab
via selection-screen.
*Code used to populate 'parameters' & execute report
SUBMIT zreport with p_param1 = 'value'
with p_param2 = 'value'.
Other additions for SUBMIT
*Submit report and return to current program afterwards
SUBMIT zreport AND RETURN.
*Submit report via its own selection screen
SUBMIT zreport VIA SELECTION-SCREEN.
*Submit report using selection screen variant
SUBMIT zreport USING SELECTION-SET 'VARIANT1'.
*Submit report but export resultant list to memory, rather than
*it being displayed on screen
SUBMIT zreport EXPORTING LIST TO MEMORY.
Once report has finished and control has returned to calling
program, use function modules LIST_FROM_MEMORY, WRITE_LIST and
DISPLAY_LIST to retrieve and display report.
*Example Code (Retrieving list from memory)
DATA BEGIN OF itab_list OCCURS 0.
INCLUDE STRUCTURE abaplist.
DATA END OF itab_list.
DATA: BEGIN OF vlist OCCURS 0,
filler1(01) TYPE c,
field1(06) TYPE c,
filler(08) TYPE c,
field2(10) TYPE c,
filler3(01) TYPE c,
field3(10) TYPE c,
filler4(01) TYPE c,
field4(3) TYPE c,
filler5(02) TYPE c,
field5(15) TYPE c,
filler6(02) TYPE c,
field6(30) TYPE c,
filler7(43) TYPE c,
field7(10) TYPE c,
END OF vlist.
SUBMIT zreport EXPORTING LIST TO MEMORY.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = itab_list
EXCEPTIONS
not_found = 4
OTHERS = 8.
CALL FUNCTION 'LIST_TO_ASCI'
EXPORTING
list_index = -1
TABLES
listasci = vlist
listobject = itab_list
EXCEPTIONS
empty_list = 1
list_index_invalid = 2
OTHERS = 3.
IF sy-subrc NE '0'.
WRITE:/ 'LIST_TO_ASCI error !! ', sy-subrc.
ENDIF.
Submit report as job
*Submit report as job(i.e. in background)
data: jobname like tbtcjob-jobname value
' TRANSFER TRANSLATION'.
data: jobcount like tbtcjob-jobcount,
host like msxxlist-host.
data: begin of starttime.
include structure tbtcstrt.
data: end of starttime.
data: starttimeimmediate like btch0000-char1.
Job open
call function 'JOB_OPEN'
exporting
delanfrep = ' '
jobgroup = ' '
jobname = jobname
sdlstrtdt = sy-datum
sdlstrttm = sy-uzeit
importing
jobcount = jobcount
exceptions
cant_create_job = 01
invalid_job_data = 02
jobname_missing = 03.
if sy-subrc ne 0.
"error processing
endif.
Insert process into job
SUBMIT zreport and return
with p_param1 = 'value'
with p_param2 = 'value'
user sy-uname
via job jobname
number jobcount.
if sy-subrc > 0.
"error processing
endif.
Close job
starttime-sdlstrtdt = sy-datum + 1.
starttime-sdlstrttm = '220000'.
call function 'JOB_CLOSE'
exporting
event_id = starttime-eventid
event_param = starttime-eventparm
event_periodic = starttime-periodic
jobcount = jobcount
jobname = jobname
laststrtdt = starttime-laststrtdt
laststrttm = starttime-laststrttm
prddays = 1
prdhours = 0
prdmins = 0
prdmonths = 0
prdweeks = 0
sdlstrtdt = starttime-sdlstrtdt
sdlstrttm = starttime-sdlstrttm
strtimmed = starttimeimmediate
targetsystem = host
exceptions
cant_start_immediate = 01
invalid_startdate = 02
jobname_missing = 03
job_close_failed = 04
job_nosteps = 05
job_notex = 06
lock_failed = 07
others = 99.
if sy-subrc eq 0.
"error processing
endif. -
How to Pass the internal table data?
DearAll,
How to pass the Data of one internal table on a 1.html page to another html page for output, in BSP Application.
regards.Hi ,
In the onInputProcessing event of the first page , write the following code...
call method NAVIGATION->SET_PARAMETER exporting
name = 'it_filt_cur'
value = it_filt_cur.
Here it_filt_cur is internal table.
NAVIGATION->GOTO_PAGE('next.htm').
In the next page , you can make the internal table as auto in the attributes.
Since you have made the itab as auto transfer , you can directly access the itab in the initialization event of the next page if it is stateless.
Regards,
Laxman Nayak.
Message was edited by: Laxman Nayak -
How to pass the primary key from a report to multiple forms
I am trying to build an application that tracks a person's training records. I have a report and 3 forms (all tabbed). From the report I can click the edit link to modify a person. Is there a way I can pass the primary key of the person (from the report) to the other forms? Hope what I'm trying to do is clear.
Thanks.Hi,
You can specify items from other pages also.
Did you use that popup to pick item ?
Did you noticed that it filter by page where your link point. You can remove filter from popup and then select other items.
Or just manually type your item names
Br, Jari
Edited by: jarola on Nov 11, 2009 1:08 AM -
How to export internal table and pass the internal table to another screen?
Hi,
I have a sql SELECT statement that select data from table into internal table. I would like to export out the internal table and pass to another screen and display the data in ALV list. How to export it out? I try but the error given was " The type of "OUT_SELECT_ITAB" cannot be converted to the type of "itab_result".
Another question is, how to pass the internal table that i export out from the function module to another screen?
Here is the code
==============================================================
FUNCTION ZNEW_SELECT_ZSTUD00.
""Local Interface:
*" IMPORTING
*" REFERENCE(IN_SELECT_YEAR) TYPE ZSTUD00-EYEAR
*" EXPORTING
*" REFERENCE(OUT_RESULT) TYPE CHAR9
*" REFERENCE(OUT_SELECT_ITAB) TYPE ZSTUD00
*& Global Declarations
DATA: itab TYPE ZSTUD00,
itab_result TYPE TABLE OF ZSTUD00.
*& Processing Blocks called by the Runtime Environment
itab-eyear = IN_SELECT_YEAR.
SELECT *
FROM ZSTUD00
INTO TABLE itab_result
WHERE eyear = IN_SELECT_YEAR.
IF sy-subrc = 0.
out_result = 'Success'.
OUT_SELECT_ITAB = itab_result.
ELSE.
out_result = 'Fail'.
ENDIF.
ENDFUNCTION.
===============================================================
Please advise. Thanks
Regards,
RaydenHi Nagaraj,
I try to change it in Tables tab page but it state that TABLES parameters are obsolete. when i "Enter". I try to "Enter" again. it seem to be ok but it stil give me the same error.
================================================================
FUNCTION ZNEW_SELECT_ZSTUD00.
""Local Interface:
*" IMPORTING
*" REFERENCE(IN_SELECT_YEAR) TYPE ZSTUD00-EYEAR
*" EXPORTING
*" REFERENCE(OUT_RESULT) TYPE CHAR9
*" TABLES
*" OUT_SELECT_ITAB STRUCTURE ZSTUD00
*& Global Declarations
DATA: itab TYPE ZSTUD00,
itab_result TYPE TABLE OF ZSTUD00.
*& Processing Blocks called by the Runtime Environment
itab-eyear = IN_SELECT_YEAR.
SELECT *
FROM ZSTUD00
INTO TABLE itab_result
WHERE eyear = IN_SELECT_YEAR.
IF sy-subrc = 0.
out_result = 'Success'.
OUT_SELECT_ITAB = itab_result.
ELSE.
out_result = 'Fail'.
ENDIF.
ENDFUNCTION.
===============================================================
regards,
Rayden -
How to pass an internal table to a SmartForm?
Hi there!
I have a program that calls a SmartForm.
I have a internal table wich I want to print.
This internal table is based on a custom structure with NO standard includes (e.g., with custom fields).
How do I declare this internal table in the transaction SMARTFORMS?
Best Regards,
Luís.Refer below thread..
How to pass an internal table to smartform.
hope it will solve ur problem
Thanks & Regards
ilesh 24x7 -
How to pass an internal table to LVC_FIELDCATALOG_MERGE
Hi Abap'ers
I want to know how to pass an internal table to the function module LVC_FIELDCATALOG_MERGE, as like we do in the FM REUSE_ALV_FIELDCATALOG_MERGE.
For Eg
v_name = 'I_OUTPUT'.
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
exporting
i_program_name = wrk_repid
i_internal_tabname = v_name
i_inclname = wrk_repid
changing
ct_fieldcat = wrk_fld_cat
exceptions
inconsistent_interface = 1
program_error = 2
others = 3.
Where I_OUTPUT is the internal table name.Re: LVC_FIELDCATALOG_MERGE with internal table
Check this
In PBO,
Building the field catalog
PERFORM f9001_build_field_cat TABLES i_fieldcat
USING 'ZCSA_MARKETIING_EXPENSE_OUTPUT'
FORM f9001_build_field_cat TABLES p_fieldcat STRUCTURE lvc_s_fcat
USING value(p_structure).
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = p_structure
CHANGING
ct_fieldcat = p_fieldcat[]
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE i013 WITH text-e05."Error in ALV field catalogue creation
LEAVE LIST-PROCESSING.
ENDIF.
ENDFORM. " f9001_build_field_cat
U can create a structure or example pass MARA then it will take the structure of MARA. -
Pass the internal table with different structures to the class module
Hi ,
I have created a class method to fill up the data in XML format. the method can be called from various programs with internal table with different structures. I want to pass it as dynamic How can I do that.
I tried to declare that as type any.
but not working.
regards,
MadhuriHi,
You could work with data reference.
Use GET REFERENCE OF itab INTO data_ref for passing the internal table to your method, and dereference it within the method with ASSIGN statement...
DATA: lr_data TYPE REF TO data.
GET REFERENCE OF itab INTO lr_data.
CALL METHOD meth EXPORTING pr_data = lr_data.
METHOD meth.
FIELD-SYMBOLS <fs> TYPE ANY TABLE
ASSIGN pr_data->* TO <fs>.
ENDMETHOD.
Kr,
Manu. -
How to pass a internal table used in one method to another method in a view
hi all,
Is it possible to pass a internal table from one method to another method in a view??
If so , kindly help me.Hi Bala,
If you want to pass this internal table between different methods of the same view then write the contents of this internal table to a context node of your view using BIND_TABLE. You can then read the contents of this internal table from the other method using the reference of that node & the GET_STATIC_ATTRIBUTES_TABLE method.
However if you want to pass the internal table between methods of different views then create a context node at the COMPONENTCONTROLLER level & then do a context mapping of this node to your local views context in both your views. You can follow the same BIND_TABLE & GET_STATIC_ATTRIBUTES_TABLE methods approach.
Regards,
Uday -
How to pass a internal table into Java Bean
Hi Experts,
I created a JSPDyn page to display Sales orders form R/3 using bapi_sales_order_getlist.
I used JCO to establish connectivity between JSP Dynpage and R/3. I executed the bapi successfully, i want to move the sales orders retrieved from the Bapi to a Java Bean. So that i can use the bean to populate the value as a table.
with regards,
James.
Valuable answers will be rewarded.....Hi Bala,
If you want to pass this internal table between different methods of the same view then write the contents of this internal table to a context node of your view using BIND_TABLE. You can then read the contents of this internal table from the other method using the reference of that node & the GET_STATIC_ATTRIBUTES_TABLE method.
However if you want to pass the internal table between methods of different views then create a context node at the COMPONENTCONTROLLER level & then do a context mapping of this node to your local views context in both your views. You can follow the same BIND_TABLE & GET_STATIC_ATTRIBUTES_TABLE methods approach.
Regards,
Uday -
How to import the internal table into subroutine as parameter
how to import the internal table into subroutine as parameter, and its structure can be recognized inside the subroutine
Hi Yong,
try this:
parameters: p_tabnm like dd03l-tabname.
field-symbols: <fs_tabname> type standard table.
data: itab_ref type ref to data.
create data itab_ref type standard table of (p_tabnm)
with default key.
assign itab_ref->* to <fs_tabname>.
select * from (p_tabnm) into table <fs_tabname>.
perform subroutine tables <fs_tabname>
using p_tabnm.
*& Form subroutine
text
-->P_<FS_TABNAME> text
-->P_P_TABNM text
form subroutine tables p_tabname type standard table
using p_tabnm.
Here p_tabname already has the structure of the table you gave as input
parameter
endform. " subroutine -
How to Read the internal table for the data download from the spool
HI all,
I have one issue regarding the spool ,we are getting the correct output as per requirement of user but when we send the same to the user in pdf format they did notget the same.
they are telling that the due date is missing from the pdf.
Please advice me how to track the internal table for the spool data converted intopdf in a readable format.
the FM used for the above task is :
call function 'CONVERT_OTFSPOOLJOB_2_PDF'
Please reply if any one worked on the same.
Thanks in advance.
Gaurav,Hi Wang,
Please let me know how you solved your question.
Points will be rewarded.
Thanks,
Arun. -
How to structure the internal table issue I want to download to excel
Hi ,
I am trying to download the data from the internal table whose structure was
i HAVE ONE INTERNAL TABLE WHICH IS
123 ABC MIKE
123 ABC DALLAS
123 ABC BOMBAY
345 BCD MEENAL
345 BCD SHINDE
345 BCD UJWALA
I want the output the i WANT THE INTERNAL TABLE TO STRUCTURE IN THIS WAY
123 ABC MIKE
DALLAS
BOMBAY
345 BCD MEENAL
SHINDE
UJWALAU have to fill internal table as ..
Loop at ITAB. <-- contains all the values
at new field2.
itab1 = itab.
append itab1.
clear itab1.
continue.
endat.
clear : itab-field1 , itab-field2.
itab1 = itab.
append itab1.
clear itab1.
endloop.
Now download ITAB1.
Maybe you are looking for
-
Upgrade SAP R/3 system is there any impact in BW3.5 system
Hi, Client need to upgrade ECC5.0 to Ecc6.0.No changes in BW3.5 side. Now is there any impact in BW.If impact what are all the impacts of your experiance.This is very urgent Could you please respond immediatly. How to test the BW system. Please do th
-
I can not delete the print jobs in the printer queue by highlighting the job and delete. What is the next thing I can try? cb This question was solved. View Solution.
-
i have a Mac book operating on Version 10.5.8 this won't let me down load version 10.7 itunes. Is it possible possible to down load a new operating systen to my Mac it has a 2.4 GHz Intel Core 2 Duo processor & 2 GB 667 MHz DDR2 2SDRAM of Memory.
-
Nokia 6230i phone software update required
I need Nokia 6230i phone software. Can someone send me the latest software Thank you. Ramesh Message Edited by zipper19 on 02-Jun-2008 07:45 AM
-
Oracle 10g R2 and Windows Vista
Hello, Our company has chosen Oracle as our DB standard and I'll have to migrate a medium-sized database running on Windows from MS-SQL Server to Oracle 10g R2. But I need to do an evaluation on my desktop. Is Oracle 10g already available on Windows