How to place a sign like '.' in front of a data field in report builder ?

Hello Everybody,
In the presentation of datas in my report , I must list the sub-elemnst of a group by plcaing a ' *.* ' in front of each one. Like
Persons
*.* Jean Fontaine
*.* François David
*.* Serena Joyau
How must I process to do it ?
Helps.
Regardly.

Thanks Vikas.
I do it as
SELECT ALL '.' || V_PRESTATAIRE_MALADIE.NOMBENEF, V_PRESTATAIRE_MALADIE.ADREBENE,
V_PRESTATAIRE_MALADIE.TELEBENE, V_PRESTATAIRE_MALADIE.LIBDETLI
FROM V_PRESTATAIRE_MALADIE
But in the field 'NOMBENEF' , more data does not appear. And too when I want to increase the lenght of the signal '.' or put it(the signal) in bold face , I have not possibility.
There has not other mean do realize it ?

Similar Messages

How to achieve the from and to date range in report builder 3.

I AM TRYING TO CREATE ONE REPORT FROM REPORT BUILDER 3.
WHERE I AM UNABLE TO DEFINE THE DATE RANGE.
HOW TO ACHIEVE THE DATE RANGE IN REPORT BUILDER.
NEED FROM DATE AND TO DATE FILTER IN REPORT BUILDER FOR PK DATE.

Hi Ganesh,
According to your description, you create a report in Report Builder 3.0, and create two parameters FromDate and EndDate, now you want to use the parameters in your MDX query, right?
If in this case, here is a sample query for your reference.
select
{[Measures].[Internet Sales Amount]
} on columns,
{[Date].[Date].members} on rows
from(
select
STRTOMEMBER("[Date].[Date].&["+@StartDate+"]"):STRTOMEMBER("[Date].[Date].&["+@EndDate+"]")
) on columns
from [Adventure Works]
Reference:STRTOMEMBER
Regards,
Charlie Liao
TechNet Community Support

How to Flip the Sign using Calculation script for historical data

I am currently using Essbase 9.3.1. Its required to flip sign for a specific set of accounts for that i am currently using UDA's to flip the sign.
But now i need to flip the sign for the historical data too. Is there any possible way to flip the sign using calculation scripts for historical data. Kindly let me know your suggestions.
Many thanks in Advance...
Edited by: [email protected] on Jul 30, 2009 9:37 PM
Edited by: [email protected] on Jul 30, 2009 10:58 PM
Edited by: [email protected] on Jul 30, 2009 11:01 PM

Of course there is. This is the kind of calc script that only gets run once, so make usre you test it well before doing it on production and make a backup of production before doing it.
It would be something like
Fix(time frame, accounts to be flipped, level zero other dimensions)
actual = actual * -1;
EndFix
Cal dim dimensions
Note, I chose actual, but you could do it for any dimension that has a single or only a couple of members. What ever dimension you choose to do the calculation on, it can't be included in the fix statement

How to find the maximum of group sums within a specific column using report builder 3.0

Hi
For each part number I am trying to find out in which week of a month did the largest daily shipment occur... so using report builder 3.0
in SSRS 2012 I can find daily, weekly and monthly totals for the units shipped but I am having a hard time thinking through the logic to find the daily max for each week.
in my data I can have multiple orders/shipments for the same product on the same day.
The ultimate goal is to set inventory levels
So..
In my matrix report I have
Row groups:
Classid => Product class
InvtID => Item Part Number
Column Groups:
FiscYr=> Fiscal Year
PerPost => Month or period the transaction occurred
Week_period => the week the transaction occurred
Day_period => The day that the transaction occurred
The aggregations are
Sum(case_shipped)
Max(case_shipped)
The Sum(case_shipped) is working as desired but the Max(case_shipped) is picking out the max amount shipped on any one order when looking
at the week, month or fiscal period and that is not what I need.
I have attached a screenshot since a picture is worth more than my words. I have also included some sample data
I would very much appreciate any thoughts on this. I am guessing that the solution has something to do with using the inscope function but
I can't wrap my head around how to use it
Thank you
Tom D
Here is some sample data for Product A
Invtid Case_ship Trandate FiscYr PerPost week_period day_period
A 10 1/1/2104 2014 1
1 1
A 3 1/1/2014 2014 1
1 1
A 50 1/2/2104 2014 1
1 2
A 30 1/3/2014 2014 1
1 3
A 20 1/9/2104 2014 1
2 2
A 5 1/9/2104 2014 1
2 2
A 20 1/10/2014 2014 1
2 3
A 60 1/10/2104 2014 1
2 3
On 1/1/2104 I shipped a total of 13 cases
On 1/2/2104 I shipped a total of 50 cases
On 1/3/2104 I shipped a total of 30 cases
On 1/9/2014 I shipped a total of 30 cases
On 1/10/2014 I shipped a total of 80 cases
On 1/9 I shipped a total of 25 cases
I would like to show that in week 1 the maximum number of cases shipped on any day is 50 (1/2/2014)
I would like to show that in week 2 the maximum number of cases shipped on any day is 80 (1/10/2104)
I would also like to show that in perpost (month) 1 the maximum
number of cases shipped on any day is 80 (1/10/2104)

Hi
I was able to find a solution
I built a new dataset in report builder using the same table as before but tried out the "Group and Aggregate" function and for the case_ship
field I chose "Sum" as my aggregate.... In essence this gave me a very cool and easy daliy sum of the shipped cases.
When I used this new dataset and built my matrix report I was able to easily get the max daily shipment for each product by week, month and
year.
Tom

How to pass a date parameter from report builder query designer to oracle database

i'm using report builder 3.0 connected to oracle database. i'm trying to pass a date parameter in the query with no success, i don't
know the exact syntax. I've tried :
SELECT * FROM igeneral.GCL_CLAIMS where CREATED_BY IN (:CREATED_BY) AND CLAIM_YEAR IN(:UW_YEAR) AND (LOSS_DATE) >To_Date('01/01/2014','mm/dd/yyyy')
it worked perfectly.
However if i try to put a date parameter "From" instead of 01/01/2014 it will not work, a Define Query Parameter popup window appear and error occurred after i fill
the values (usually i shouldnt get this popup i should enter the value when i run the report)
SELECT * FROM igeneral.GCL_CLAIMS where CREATED_BY IN (:CREATED_BY) AND CLAIM_YEAR IN(:UW_YEAR) AND (LOSS_DATE) >To_Date(:From,'mm/dd/yyyy')
appreciate your assistance

Hi Gorgo,
According to your description, you have problem when in passing a parameter for running a Oracle Query. Right?
Based on my knowledge, it use "&" as synax for parameter in Oracle, like we use "@" in SQL Server. In this scenario, maybe you can try '01/01/2014' when inputing in "From". We are not sure if there's any limitation for To_Date()
function. For your self-testing, you can try the query in sqlplus/sql delveloper. Since your issue is related to Oracle query, we suggest you post this thread onto Oracle forum.
Best Regards,
Simon Hou

How to remove Built-in-Fields from Report builder report

I have create SSRS report which is sending email to recipient but at the bottom of report email I am also getting
report accessible address. I don’t want to send that address to recipient. How should I remove from report builder?
The report is accessible at the following address
<<Report address>>
Rahul

You have to change the report subscription, and untick the checkbox that says to also send it as a link.

How to filter a table using column filter on a date field with time?

Hi,
I have a date field where I am inserting a date+time value, for example: 01/01/2012 09:30:00 So, I would like to filter an adf table using a column inputdate filter to filter only by date this field.
I was testing using formats but with no luck.
Any Idea?
Thanks,
jdev 11.1.2.3
Edited by: jhon.carrillo on Oct 29, 2012 12:23 AM

Then, try to add another attribute in your SELECT VO statement, which truncates the original date_and_time field:
   SELECT.... TRUNC(DATE_AND_TIME) as truncated_dateAfter that, put reference to that attribute in the filter facet, as follows
         <f:facet name="filter">
                  <af:inputDate value="#{vs.filterCriteria.TruncatedDate}" id=.../>
         </facet>Do not forget to add the TruncatedDate attribute in the <tree...> binding in the pageDef, along with others VO attributes. Do that manually.

How to send a signed SOAP message with additional HTTP Header fields

Our Partner's integration requirements are that we send them asynchronous SOAP messages, that are digitally signed, and whose HTTP headers contains 5 or 6 additional header fields, of which 3 or 4 will need to be dynamically set during the message mapping. I believe we can use the HTTP adapter for adding new fields to the HTTP header, but don't believe it supports signing. I believe that the SOAP adapter supports signing, but I'm not clear on how to use it to add fields to the HTTP header. What is the most straight-forward way to achieve both the signing of the message and the addition of the HTTP header values?
Thanks,
Kurt

>>>What is the most straight-forward way to achieve both the signing of the message and the addition of the HTTP header values?
Use Java mapping for both.
1) Signing the message
You can digitally sign the soap message using many standard api like WSS4j? or refer Java XML signature API which comes in Jdk1.6.
Refer these links
WSS4J - http://ws.apache.org/wss4j/axis.html
Java XML signature : http://java.sun.com/developer/technicalArticles/xml/dig_signature_api/
2) >>whose HTTP headers contains 5 or 6 additional header fields, of which 3 or 4 will need to be dynamically set during the message mapping
Use Dynamic configuration API to set the additional header fields during message mapping.

How to print page numbers like 'Page 2 of 10' on an ALV report

Hi,
I've seen a few threads regarding this, but haven't seen any code that actually works.
What I'd like to do is print page x of y (i.e. Page 2 of 10) on an ALV report once the report is printed.
Is this actually possible? If so, what are the steps and coding required?
I greatly appreciate your help experts!
Mark

Hi Mark,
I think there is no better way than calculate it before doing the output. If you do not have extra-new-page, the total number of pages may be calculated as the number of lines displayed divided by lines on one page - this will depend on the lines used for top-of-page and end-of-page. Also filters and subtotals could not be used.
An other approach could be to read the current page number in end-of-list event and then scan the whole list using READ LIST and MODIFY LIST in each page top accordingly.
Because it is decades ago I printed a list last time I will never have the chance to try.
Regards,
Clemens

How to get .oce to talk to DAS & bring back data in Interactive Reporting?

Hi Hyperion Experts,
This is also a fairly basic question, I use Hyperion 9.3.1 and I have Shared Services, Workspace and Interactive Reporting Studio running on our Windows 2003 Server.
My goal is to import a .bqy document I created in Interactive Reporting Studio into workspace, and be able to click on the "refresh" button and see it refreshes the data from the backend Oracle 10g database.
I have completed the following steps so far,
1. I have created a DSN. This DSN, named "Oracle 10g Data Source", when I clicked on "Test Connection" button, It ran successfully.
2. I have created a new Datasource entry in the DAS service. If I double click on the newly created Datasource entry, the screen would display the following details.
Connectivity Type = Oracle Net
Database Type = Oracle
Enter the name of the Data source = Oracle 10g Data Source
Select the name of the Data source (it is grayed out, nothing selected)
Server/File (it is grayed out, nothing entered)
then, followed by some default connection parameters.
3. I have created a "Oracle 10g Data Source.oce" file using the Interactive Reporting Studio. I saved the .oce file at
C:\Hyperion\BIPlus\data\Open Catalog Extensions\Oracle 10g Data Source.oce
4. I created a new constrProj_Oracle10gOCE.bqy, during the creation, I chose
"Create a new document with Recent Database Connection File" option, then I chose the Oracle 10g Data Source.oce that I have created in step 3. After I log in with host user/password, I have created a data model and I see that it brings back a data set when I clicked on the "process" button. I saved this .bqy document.
5.
I imported the Oracle 10g Data Source.oce and constrProj_Oracle10gOCE.bqy into the workspace under a folder called
Root/MYBI/Test
6. I right click on the constrProj_Oracle10gOCE.bqy document, and chose "Open". It opened with Results section highlighted on the left hand side, and with data showing on the right hand side. However, when I clicked on the "refresh" button, I'd get a message box with a red X. It says,
An Interactive Reporting Service error has occurred -
Failed to acquire requested service.
(2001)
I guess the data I see in this constrProj_Oracle10gOCE.bqy was just the cached data that was brought back when I hit the process button of this .bqy when it was first created in the Studio, and that it never established any connection via the DAS service to the backend.
Could someone please show me what I have done wrong here?
thanks,
hypuser1010

EricaHarris,
Yes, the issue is still open. Obviously, I have gone down the path of "Scenario One".
Based on your reply, I have done the following.
There are three things I am configuring here: DSN, DAS and OCE.
1) When I created the DSN,
I started the ODBC Data Source Administrator, Click on second tab "System DSN". I added a new ODBC Data Source.
Data Source Name = Oracle 10g Data Source
TNS Service Name = //146-abc.xyz.com:1521/MYORCL0617
2) I re-created the DAS entry, per your suggestion, I made sure that "the name of the data source will be the host name you specified in your OCE".
Connectivity Type = Oracle Net
Database Type = Oracle
Enter the name of the data source= //146-abc.xyz.com:1521/MYORCL0617
3) for my OCE, I specified
Connection Software = Oracle Net
type of Database = Oracle
on the first screen.
then, on the next screen, I specified
Host = //146-abc.xyz.com:1521/MYORCL0617
I reployed the OCE, the .bqy document and restarted DAS. Yes, my .bqy document does refresh its data successfully from the backend.
However, I am not 100% convinced that the .bqy uses the OCE which talks to the DAS, which talks to the DSN entry and brings data back to the .bqy document.
Here is what I did,
I opened up the DSN entry, changed the TNS Service Name from //146-abc.xyz.com:1521/MYORCL0617 to
//146-abc.xyz.com:1521/NONSENSE. I then restarted DAS and redeployed the .bqy document. the .bqy document is still able to refresh its data. So, I have just proven that the .bqy document does not need a valid DSN entry to work, how come??
Can you (or anyone) please explain the phenomenon that I see?
Also, a very basic question. you know that when you create a .bqy in the Studio, you "import" an OCE into the .bqy document so that the .bqy knows that it should use this OCE to talk to the backend data source. but, when you deploy this .bqy in workspace, how does the .bqy know that it is supposed to go through DAS (and DSN) to interact with the database, rather than the "internal" OCE that was pre-built with this .bqy?
thanks,
hypuser1010

How do you call dynamic fields in Report Builder

I have some fields that they were filled in a dynamic way,
and I want to make some calculations using the information that was
populated in this field. When I put the name of the field in my
calculation control, it did not see find the field control.
Does anyone know how can I call the field control? The
information is not part of any particular column of the
query.

check out the Oracle Portal Tutorial White Paper (http://technet.oracle.com/docs/products/iportal/listing.htm#tutcase), there is a section where they build a report with repeating fields

How to Integrate SAP EP with SAP PI to send data for creating reports in BW

Hi Gurus
I am struck with an Object/Interafce Creation in my project. My requirement is to Integrated SAP Enterprise Portal and SAP BW using SAP Pi. I am working on SAP PI7.1. The SAP EP sits on the Oracle Database and it will send some data required for generating some reports in BW.
My question is how to integrate the above systems by which adapters and which will be the best approach. If we use PI, the major advantage is we can Monitor the flow of the messages .
Cant the BW System directly talk with the SAP EP System. If there is an approach, can we monitor the message flow with out PI involvement.
All the above mentoined systems(SAPEP,SAPPI,SAPBW,SAPSRM,SAPABAP) are in the client landscape only.
Please suggest me the approach.
Thanking you

Hi rajshekar
Thanx for the reply
In the current project we are having an Interafce which is a B pass sceanrio from MDM to BI; MDM is dat , pi is picking the data by Sender File CC and Posting the Data to BW by using Receiver File CC. this does not involve any developemnt of ESR Objects.
My current requirement also seems to be the same Pick thhe date from SP Portal and give it to BW for generaiting reports.
Can i use the SOAP at sender side and File at receiver side with out the involvement of ESR Objects.
Does the By Pass aprroach work for this aprticular interafce.
How can we integrate SAP EP with BW withour Pi?
please share any blogs or forums
please help
Thank you
Edited by: VArjun86 on Jan 4, 2012 10:27 AM

[Forum FAQ] How do I send an email to users when the data in the report have been changed in Reporting Services?

Introduction
There is a scenario that the data in the report changes infrequently, so the users want to be informed and get the most updated data once the data changes. By default, report server always run the report with the most recent data. Is there a way that we
can subscribe the report, so that we can send an email to users when the data in the report has been changed?
Solution
To achieve this requirement, we can create a subscription for the report, then create a trigger in the table which including the report data. When this table has data insert, update or delete, it will be triggered and execute the subscription to send email
to users.
In the Report Manager, create a subscription for the report and make it only execute one time.
When we create a subscription, a corresponding SQL Agent job will be created. Then we can use the query below to find out the job based on ScheduleId:
-- List all SSRS subscriptions
USE [ReportServer]; -- You may change the database name.
GO
SELECT USR.UserName AS SubscriptionOwner
      ,SUB.ModifiedDate
      ,SUB.[Description]
      ,SUB.EventType
      ,SUB.DeliveryExtension
      ,SUB.LastStatus
      ,SUB.LastRunTime
      ,SCH.NextRunTime
      ,SCH.Name AS ScheduleName
          ,RS.ScheduleId
      ,CAT.[Path] AS ReportPath
      ,CAT.[Description] AS ReportDescription
FROM dbo.Subscriptions AS SUB
     INNER JOIN dbo.Users AS USR
         ON SUB.OwnerID = USR.UserID
     INNER JOIN dbo.[Catalog] AS CAT
         ON SUB.Report_OID = CAT.ItemID
     INNER JOIN dbo.ReportSchedule AS RS
         ON SUB.Report_OID = RS.ReportID
            AND SUB.SubscriptionID = RS.SubscriptionID
     INNER JOIN dbo.Schedule AS SCH
         ON RS.ScheduleID = SCH.ScheduleID
ORDER BY USR.UserName
       ,SUB.ModifiedDate ;
Create a trigger in the table which including the report data.
CREATE TRIGGER reminder
ON test.dbo.users
AFTER INSERT, UPDATE, DELETE
AS
exec [ReportServer].dbo.AddEvent @EventType='TimedSubscription', @EventData='b64ce7ec-d598-45cd-bbc2-ea202e0c129d'
Please note that the command ‘exec [ReportServer].dbo.AddEvent @EventType='TimedSubscription', @EventData='b64ce7ec-d598-45cd-bbc2-ea202e0c129d'’ is coming from the job properties. We can go to SQL Server Agent Jobs, right-click the corresponding job to open
the Steps, copy the step command, and then paste it to the query.
Then when the user table has data insert, update or delete, the trigger will be triggered and execute the subscription to send email to users.
References:
Subscriptions and Delivery (Reporting Services)
Internal Working of SSRS Subscriptions
SQL Server Agent
Applies to:
Reporting Services 2005
Reporting Services 2008
Reporting Services 2008 R2
Reporting Services 2012
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Thanks,
Is this a supported scenario, or does it use unsupported features?
For example, can we call exec [ReportServer].dbo.AddEvent @EventType='TimedSubscription', @EventData='b64ce7ec-d598-45cd-bbc2-ea202e0c129d'
in a supported way?
Thanks! Josh

How do i call a :cp_ or a :cf in a query in reports builder?

Hi, i got a report.
i included a function in 1 of my queries in reports builder but the report is running very long now.
so i tryed to put the function in that query in a :cf (formula column) and call the :cf in my query but its not picking up the value.
am i missing something?
or is there another way?
please help asap.
thanks....

in my data model in reports builder :
i have a main query with about 5 other queries.
in one of the 5 queries i am getting tax information, which contains unions, i have just pasted one of the unions.
If you look in this query (in bold) you will see i tried inderting the database function, but it runs too slow.
then i tried to insert the same function in a cf, and then tried to call the cf in my query, just to get the value (tax_start_date).
the cf doesn't affect the performance and i can see the value in the xml but cant seem to call the value in my query.
SELECT distinct decode(pbv.balance_name,'Asset Purchased at Reduced Value', 'General Fringe Benefit',pbv.balance_name) balance_name,
'(' ||'YTD'||')',
decode(pbv.effective_date,:effective_date,pbv.effective_date,:effective_date)effective_date,
pbv.assignment_id,
pbv.ASSIGNMENT_ACTION_ID,
pbv.PAYROLL_ACTION_ID,
sum(pbv.VALUE) value,
FROM pay_balance_values_africa_v pbv
WHERE (
pbv.balance_name = 'Bonus Provision'
OR pbv.balance_name = 'Non Taxable Subsistence'
OR pbv.balance_name = 'Taxable Subsistence RFI'
OR pbv.balance_name = 'Taxable Subsistence NRFI')
AND pbv.database_item_suffix in ('_ASG_TYTD')
and pbv.VALUE <> '0'
and pbv.effective_date = (select max(pbva.effective_date) from pay_balance_values_africa_v pbva--, xxfrgpay_legis_tax_year_v lty
WHERE --pbva.BUSINESS_GROUP_ID = lty.BUSINESS_GROUP_ID
pbva.assignment_id = :assignment_id
and pbva.balance_name = pbv.balance_name
and pbva.database_item_suffix in ('_ASG_TYTD')
-- and pbva.effective_date between '01-MAR-10' and :effective_date-- '31-DEC-2010'
and pbva.effective_date between (apps.xxfrg_africa_tax_reg.get_tax_dates(0, null, null, null, pbva.effective_date) ) and :effective_date
--and pbva.effective_date between :cf_tax_start_date and :effective_date* )
and pbv.assignment_id = :assignment_id
and pbv.business_group_id in (81,84,86,88)
group by pbv.balance_name,pbv.effective_date,pbv.assignment_id,pbv.ASSIGNMENT_ACTION_ID, pbv.PAYROLL_ACTION_ID
ORDER BY 2

How can I populate a date field when document is signed?

I have 4 digital signature fields in a PDF form. Next to each signature field is a date field (m/d/yyyy format). I would like it so when the user signs the signature box that the date field next to it populates with todays date, then changes to read only (so it cannot be altered).
In Adobe Acrobat Pro 9 I have this form and it has the following fields
Signature1
Signature2
Signature3
Signature4
DateField1
DateField2
DateField3
DateField4
The Signature fields trigger a Topaz.GemSignPlus driver where the end user will be signing on an electronic signature pad.
How can I use Javascript to detect when one of those Signature fields is populated and then fill in the date to the approrpiate date field? I tried creating boolean variables initialized as false for each sig field. Then when the signature is done I try to change it to true, but for whatever reason my javascript detecting the value doesn't do anything.
I've searched the net endlessly for this solution. I can't believe I'm having such a hard time finding an answer. I mean how many places do you go where they ask you to "Sign and date here". Every signature based document I've ever seen also requires a date.
Anyway here's what I have. In Document JavaScript functions I have a script name called populate date:
function populatedate()
var bSignature1 = new Boolean();
var bSignature2 = new Boolean();
var bSignature3 = new Boolean();
var bSignature4 = new Boolean();
if (bSignature1) {
    DateField1.value = util.printd ("m/d/yyyy", new Date());
if (bSignature2) {
    DateField2.value = util.printd ("m/d/yyyy", new Date());
if (bSignature3) {
    DateField3.value = util.printd ("m/d/yyyy", new Date());
if (bSignature4) {
    DateField4.value = util.printd ("m/d/yyyy", new Date());
In each signature field I have under the Signed tab "This script executes when field is signed:
var bSignature1 = new Boolean(true);
I'm trying to change it to true see. My thinking is if its true than DateField1.value should print the m/d/yyyy in it from the built in Date() function.
But maybe I am not getting this context correct. I am new to Javascript in Adobe.

It's quite a round-about script... Why not simply use the signature signing script to set the value of the date field? The correct syntax for that is:
this.getField("DateField1").value = util.printd ("m/d/yyyy", new Date());

How to place a sign like '.' in front of a data field in report builder ?

Similar Messages

Maybe you are looking for