How to populate data in a new page when user place mouse on table cell

Hi friends,
i am working on OAF. I have one table with data coming from the backend. In a table some cells repersents wiht "P" or "C", till that Ok. but when user place mouse pointer over the cell, data should be populated in addtion text( babul text) or new page should be opened and it will show the related information about perticular cell.
in my R&D. i created one OACellformateBean and attached messageStyled Text. MessageStyled text have property like " setMouseOver(MulInode, string)". i am really not aware what are the areguments i need to pass to this method ?. what is MultiInode.
Pls help me in this reagard?. i am really in trouble ?????

Thanks a lot. Tapash Ray, atleast should it possiable to open a new window when user click cell. could you please suggest some toher way similar to this , which we can get the data to diplay in a new window.

Similar Messages

How do you create a new page when user checks a box?

I guess it would be a check box. I'm looking for a way to have the user select create a new page when the user runs out of space in the text box that is given. So if its possible is there a way to create a new page with a continuing text box when the user has selected the create a new page check box. Thanks.

Hi,
You can achieve this by just making some changes to the textfield (and the page layout).
First, select the textfield and then in the Layout palette, tick 'expand' height to fit'. When you preview the form, you will see that as you type information into the field, a scroll bar will appear. When you exit the field, it will expand automatically to display the full contents.
Now the problem will be that the textfield will expand over objects that are positioned below it - not good!
So what you need to do is set up your form for a flowed layout. First select all of the objects that do not grow in size and wrap them inside a 'positioned subform'. When you select the subform you can see this setting in the Object > Subform palette. You should name the subforms in the hierarchy. So you will end up with a positioned subform above your textfield and a positioned subform beneath your textfield (if you have objects beneath it).
Then select page1 in the hierarchy and in the Object > Subform palette, change the content to 'flowed'. Hopefully the layout won't change too much (because you will have most of your objects in their positioned subform).
Last step is to select the textfield and in the Object > Field palette tick 'Allow page breaks within content'. This tells Acrobat/Reader to split the object if it overflows onto a new page.
Now save the form as a Dynamic XML Form in the save as dialog and previewed it. Now when the textfield expands it will push objects beneath it down. Also when it gets to the bottom of the page, it will start a new page automatically and continue the content on the new page.
Here is an example:
https://acrobat.com/#d=kwa4t2vu6mXbgMCyqEF0aQ
Paul Guerette is giving an online tech talk on dynamic forms on the 30 November, which I would recommend. Details here:
http://acrobatusers.com/events/49326/tech-talk-developing-flowable-form-content
Hope that helps,
Niall

How can I navigate to a new page when after-submit process running proc

I have a long running procedure and would like to provide the users with an animated gif to indicate progress that updates a description line to indicate the current step in the process.
Currently I have a couple pages in this application in which a stored procedure in a package is called which performs a long-running process which updates progress in a table. These processes have a single parameter argument. In these cases I call the procedure via the Job Scheduler as part of my After-Submit process and the page navigation jumps to another page which shows a graphical representation of % complete based on the progress updates in the table and refreshes itself every 5 seconds until the job is complete. This works fine.
I am now running into an issue where I have a more complex set of processes, with a number of parameters. To resolve this I used the same process as above, however, I first check to see if the process exists in the Job Scheduler, if not I create it. I then set all of the parameters and tell the job scheduler to execute the procedure. This should work similar to the process I am running on the other pages, however, in this page where I have multiple parameters and send an execute command rather than an execute immediate on job creation, the system runs the entire job prior to running the page branch, as a result the end user is stuck on a hanging page with no user feedback for two minutes after pressing submit.
I am looking for how to call the procedure and have the branch execute so a progress screen can be viewed. I am not committed to the use of the job scheduler if there is a better way.
Any help is greatly appreciated.

The process involves
(1) a detail table filled with phone usage data, approximately 175,000 records per month.
(2) a table that stores what various combinations of codes in the detail table translate to for types of calls or data transmissions
(3) a summary table for the months calls and billing
(4) the E-Business Suite.
(5) A GTT for temporary crossreference storage
(6) A GTT for reporting data
I have a parameter page where the user selects what data they are looking for and then submits it to generate the report.
The generation of data is a four step process.
(A) Retrieve the Code Combination ID's for the phone usage specified in the parameters from the summary billing table(1) into a GTT(5)
(B) Query the department and Account Code Block Details from E-Business Suite(3) (using dblink) for the CCID's in step one and add to the GTT(5)
(C) Run a query which uses the detail table(1), a function against the crossref table(2), and the crossreference GTT(5) to create the output in the report GTT(6)
(D) An ApEx page process that counts the output and returns to a page without Export to Excel for over 65000 records or with Export for under.
The parameter page is an ApEx page with some text fields, a couple date fields, and some checkboxes. An after submit process calls a packaged procedure which calls separate procedures for (A), (B), and (C), the page then branches to a page that shows an animated gif and current step of the process {this is what is not working right now}. Once the task completes this page branches as per (D) to a page that shows all the contents of the GTT report(6).
The process works successfully with the exception that instead of going to a page to show the process the system simply hangs on the parameter page after the submit is pressed until the processing is done and then goes to the processing page just long enough to branch to the report page.
I am beginning to think that I should alter the design to not use the GTT, but include the username as a field in the output table with a binary index on it for speed so that I can use the job scheduler to run a separate session and hence enable the processing page. The processing page is important as the query can take anywhere from 2 minutes to 2 hours to generate the report depending upon the parameters.

How do I post to a new page when the 1st page is full?

How do you create a bul. board where the posts go on a 2nd
page when the first page is filled ...and 3rd page when 2nd is
full, etc ... Maybe I can stick a wordcount in a while loop before
the CFOutPUT Tag? Is there such a variable that holds a word count
or better still, a line count?
thnx a billion, please, please help!

Check out this code-Use a cfc which will be the same for you
and then change my query for yours in the .cfm HTHs:
functions.cfc:
<cfcomponent output="yes">

<cffunction name="nextXpage" access="public"
returntype="struct" hint="Next x page function" output="No">
<cfargument name="recordcount" required="Yes" default="0"
type="numeric" hint="The total numbers of records / values">
<cfargument name="page" required="Yes" type="numeric"
default="0" hint="The page number that you are currently on. (for
example URL.page)">
<cfargument name="maxrows" required="No" type="numeric"
default="10" hint="The maximum records / values to be displayed per
page">

<cfset var nextXpage = structNew()>

<cfset nextXpage.pagecount =
CEILING(arguments.recordcount / arguments.maxrows)>

<cfset nextXpage.maxrows = arguments.maxrows>

<cfset nextXpage.currentpage = arguments.page>

<cfset nextXpage.recordcount = arguments.recordcount>

<cfif arguments.page eq 1>
<cfset nextXpage.startrow = 1>
<cfelse>
<cfset nextXpage.startrow = (arguments.page *
arguments.maxrows) - (arguments.maxrows -1)>
</cfif>


<cfif arguments.page neq nextXpage.pagecount>
<cfset nextXpage.next = true>
<cfset nextXpage.nextpage = arguments.page + 1>
<cfelse>
<cfset nextXpage.next = false>
<cfset nextXpage.nextpage = 1>
</cfif>

<cfif arguments.page eq 1>
<cfset nextXpage.previous = false>
<cfset nextXpage.previouspage = 1>
<cfelse>
<cfset nextXpage.previous = true>
<cfset nextXpage.previouspage = arguments.page - 1>
</cfif>

<cfreturn nextXpage>
</cffunction>
</cfcomponent>
Then on your output page where you have the info:
.cfm page:
<cfquery name="qrysales"
datasource="davanzo_villa.admindb" >
SELECT DISTINCT
clientinfo.Id, clientinfo.RemoteAddress, clientinfo.visit,
clientinfo.country
FROM clientinfo
order by clientinfo.Id
</cfquery>

<cfquery name="GetHits">
SELECT * FROM hit_counter
</cfquery>
<cfparam name="URL.page" default="1">

<cfset functions =
createobject("component","functions")>
<cfset nav =
functions.nextXpage(qrysales.recordcount,URL.page,15)>
<table width="792">
<h4>Total Hits: <CFOUTPUT
query="GetHits">#hit_count#</cfoutput></h4>
<h4>Total Unique Visitors:
<cfoutput>#qrySales.RecordCount#</cfoutput></h4>
</table>
<table width="792">
<tr><td>
<cfoutput>Unique Visitors: #nav.recordcount# (page
#nav.currentpage# of #nav.pagecount#)
<cfif nav.previous>
<a
href="hitcount.cfm?page=#nav.previouspage#">Previous</a>
<cfelse>
Previous
</cfif>
<cfif nav.next>
<a
href="hitcount.cfm?page=#nav.nextpage#">Next</a>
<cfelse>
Next
</cfif>
<ul>
<cfloop From = "1" To = "#nav.pagecount#" index =
"pagenumber">
<cfoutput>
<a
href="hitcount.cfm?page=#pagenumber#">#pagenumber#</a></cfoutput>
</cfloop>
</ul>
</cfoutput>
</td></tr>
</table>
<table width="792">
<tr>
<td>Date</td>
<td>Visitor Number</td>
<td>Visitor`s IP Address</td>
<td>Visitor`s Country</td>
<td>Path Taken</td>
</tr>
<cfoutput query="qrysales" startrow="#nav.startrow#"
maxrows="#nav.maxrows#">
<tr>
<td>#qrySales.visit#</td>
<td>#qrySales.id#</td>
<td>#qrySales.RemoteAddress#</td>
<td><cfif qrysales.country neq ""><a
href="country.cfm?Remote_Addr=#qrysales.RemoteAddress#">#qrySales.country#</a><cfelse><a
href="country.cfm?Remote_Addr=#qrysales.RemoteAddress#">Find
country</a></cfif></td>
<td><a href="hitpathdetails.cfm?id=#id#">See path
taken</a></td>
</tr>
</cfoutput>
</table>

How to catch data from Purchase Order form, when user click CLOSE menu?

Hi,
I need do my own biz process when user click CLOSE in the Data menu to close a purchase order.
But I don't know how to get data from PO form which opened by user.
Can anybody give me some suggestions? thanks.

Clicking "Close" is menuUID 1286. (Check this by going to View->System Information, and then hovering your mouse over "Close" in the menu. The menuUID is displayed in the bottom left of the screen)
So catch the menu event, when menuUID and pVal.BeforeAction = True.
The slightly tricky thing here is that pVal for a menu event doesn't give you the form, but it will be the active form, so you can do this:
Private Sub SBO_Application_MenuEvent(pVal As SAPbouiCOM.IMenuEvent, BubbleEvent As Boolean)
     If(pVal.BeforeAction And pVal.menuUID = "1286")
         SAPbouiCOM.Form oForm = SBO_Applcation.Forms.ActiveForm
         //Now you have the form, when the user has clicked close, so process the data
         //from the form as normal
     End If
End Sub
Syntax might be wrong, I typed it up from memory and have no error checker!
Edited by: njmog1 on Feb 28, 2011 10:35 AM

How to populate data in a JTable?????????

hi there
can anyone tell me how to populate data in a JTable? when a table is displayed, the table should have data retrieved from a file. thank you.

Hi,
it is correct, that the best way to learn about JTable is to read the online tutorial about JTable. To give you a quick guideline, where to start your implementation, I will add this:
A JTables data is hold in a TableModel. TableModel is an interface, so if a class implements this interface correctly, you can simply populate the data hold by this TableModel by constructing a JTable this way
JTable jt = new JTable(MyTableModel);
where MyTableModel is your class, which implements the TableModel interface.
When JTable has to render a cell, it will call the getValueAt(...) method of the TableModel for example.Your implementation of this method must deliver the requested data - if you prefetch a bunch of data from a file and store it internally in this TableModel or fetch it from the file just in time, is up to you.
greetings Marsian

How to populate data in MPP through F4 search help(the field should get filtered as per key)

Dear Experts.
I am new to ABAP and hence trying jmy hands on various ways of peforming a task.
I have a requirement. I want to maintain a database tables through MPP : ZLT_Auftrag (Refer Screen Shot 1: Doubt MPP1) and ZLT_Kunde (Refer Screen Shot2: Doubt MPP2)
The fields of ZLT_Kunde are: K1, K2, K3
The fields of ZLT_Auftrag are: A1, A2, A3, A4, P1 P2 and P3 are related as per the key field "A3"   (Here A3 = K2)
I want the User to be able to Maintain this table through the Screen that I had created using MPP. (Plz refer the attached Screen Shot3:Doubt MPP3 of the SCREEN in MPP)
When I populate the Kunde name(K1) in the SCREEN (Can be done by F4 Search help), then on hitting the pushbutton "Get Kunde" the kunde Code (K2) appears . Now from here it can be deleted or even a new Kunde name and code can be saved dirctly to the database table : ZLT_Kunde. (Refer Screen Shoot4: Doubt MPP4)
For Example for Kunde (K1)= BASF, Kunde Code (K2) = BSF, the Auftrag should be all those values from ZLT_Auftrag (where A3 = BSF)
When I try to populate the Auftrag value on the SCREEN then on hitting F4 (already created for table ZLT_Auftrag in se11) then I get all the values of Auftrag (A1) from the table ZLT_Auftrag. (Ply refer Screen Shot 5: Doubt MPP5)
MY REQUIREMENT: Here I want that either through F4 help or through drop down ONLY those values of Auftrag-A1 should appear on the SCREEN which satisfies the condition: A3 = K2
I am unbale to get how to do that.
I need your valuable suggstions.
Regards
Chandan

And the code of the MPP is:
*& Module Pool       SAPMZDEMO_MPOOL_03
PROGRAM SAPMZDEMO_MPOOL_03.
TABLES: ZLT_MITA, ZLT_Kunde, ZLT_Auftrag, Zlt_Stdsatz.
DATA: flg_lock TYPE c,
*      indx TYPE i,
*      indxk TYPE i,
*      indxa TYPE i,
*      TCNT TYPE sy-tabix,
      lv_msgv1 TYPE sy-msgv1.
*DATA: it_mita    TYPE TABLE OF ZLT_mita,
*      it_kunde   TYPE TABLE OF ZLT_KUNDE,
*      it_auftrag TYPE TABLE OF ZLT_AUFTRAG.
*&      Module STATUS_9000 OUTPUT
*       text
module STATUS_9000 output.
SET PF-STATUS 'ZSTATUS01'.
* SET TITLEBAR 'xxx'.
If flg_lock is Not initial.
    LOOP at Screen.
If screen-group1 = 'G1'.
Screen-input = 0.
MODIFY SCREEN.
       Endif.
    ENDLOOP.
      MESSAGE s000(8i) WITH 'Mitarbeiter already locked by user' lv_msgv1.
ENDIF.
endmodule.                 " STATUS_9000 OUTPUT
*&      Module USER_COMMAND_9000 INPUT
*       text
module USER_COMMAND_9000 input.
*To Populate Data into Mitarbeiter through Pushbuttons
CASE sy-ucomm.
    When 'OK_GET'.
      Clear : flg_lock.
        IF ZLT_MITA-M1 is NOT INITIAL.
            SELECT SINGLE *
            FROM ZLT_MITA
            Where M1 = ZLT_MITA-M1.
*To create a Lock Object so that when two or more employees are accessing the same data
* at the same time then for the new user the data gets locked and only can been seen in
*display mode
        IF sy-subrc = 0.
        CALL FUNCTION 'ENQUEUE_EZLT_MITALOCK'
         EXPORTING
           MODE_ZLT_MITA        = 'E'
           MANDT                = SY-MANDT
           M1                   = ZLT_MITA-M1
*           X_M1                 = ' '
*           _SCOPE               = '2'
*           _WAIT                = ' '
*           _COLLECT             = ' '
         EXCEPTIONS
           FOREIGN_LOCK         = 1
           SYSTEM_FAILURE       = 2
           OTHERS               = 3
        IF sy-subrc <> 0.
          flg_lock = 'X'.
          lv_msgv1 = sy-msgv1.
        ENDIF.
        ENDIF.
        ELSE.
            MESSAGE S000(8i) With 'Enter Mitarbeiter Name'.
        ENDIF.
    When 'OK_SAVE'.
       Modify ZLT_MITA.
       IF sy-subrc = 0.
         MESSAGE s000(8i) With 'Data Saved'.
       ENDIF.
    When 'OK_DELETE'.
        IF ZLT_MITA-M1 is NOT INITIAL.
            DELETE
            FROM ZLT_MITA
            Where M1 = ZLT_MITA-M1.
          IF sy-subrc = 0.
            MESSAGE S000(8i) With 'Data deleted'.
          ENDIF.
        ENDIF.
*     When 'OK_FIRST'.
*           indx = 1.
*     When 'OK_NEXT'.
*           indx = indx + 1.
*     When 'OK_PREV'.
*           indx = indx - 1.
*     When 'OK_LAST'.
*           Describe Table it_mita lines indx.
*To Populate Data into Kunde through Pushbuttons
    When 'OK_GETK'.
        IF ZLT_Kunde-K1 is NOT INITIAL.
            SELECT SINGLE *
            FROM ZLT_Kunde
            Where K1 = ZLT_KUNDE-K1.
        ELSE.
            MESSAGE S000(8i) With 'Enter Kunde Name'.
        ENDIF.
    When 'OK_SAVEK'.
       Modify ZLT_Kunde.
       IF sy-subrc = 0.
         MESSAGE s000(8i) With 'Data Saved'.
       ENDIF.
    When 'OK_DELETEK'.
        IF ZLT_KUNDE-K1 is NOT INITIAL.
            DELETE
            FROM ZLT_KUNDE
            Where K1 = ZLT_KUNDE-K1.
          IF sy-subrc = 0.
            MESSAGE S000(8i) With 'Data deleted'.
          ENDIF.
        ENDIF.
*To Populate Data into Auftrag Through Pushbuttons
    When 'OK_GETA'.
        IF ZLT_KUnde-K2 is NOT INITIAL.
            SELECT SINGLE *
            FROM ZLT_Auftrag
            Where A3 = ZLT_Kunde-K2.
        ELSE.
            MESSAGE S000(8i) With 'Enter Kunde Name'.
        ENDIF.
    When 'OK_SAVEA'.
       Modify ZLT_Auftrag.
       IF sy-subrc = 0.
         MESSAGE s000(8i) With 'Data Saved'.
       ENDIF.
    When 'OK_DELETEA'.
        IF ZLT_Auftrag-A1 is NOT INITIAL.
            DELETE
            FROM ZLT_Auftrag
            Where A1 = ZLT_Auftrag-A1.
          IF sy-subrc = 0.
            MESSAGE S000(8i) With 'Data deleted'.
          ENDIF.
        ENDIF.
*To Populate Data into Position Thorugh Pushbuttons
    When 'OK_GETP'.
        IF ZLT_Auftrag-A2 is NOT INITIAL.
            SELECT SINGLE *
            FROM ZLT_Auftrag
            Where A3 = ZLT_Kunde-K2.
        ELSE.
            MESSAGE S000(8i) With 'Enter Kunde Name'.
        ENDIF.
    When 'OK_SAVEP'.
       Modify ZLT_Auftrag.
       IF sy-subrc = 0.
         MESSAGE s000(8i) With 'Data Saved'.
       ENDIF.
    When 'OK_DELETEP'.
        IF ZLT_Auftrag-A1 is NOT INITIAL.
            DELETE
            FROM ZLT_Auftrag
            Where A1 = ZLT_Auftrag-A1.
          IF sy-subrc = 0.
            MESSAGE S000(8i) With 'Data deleted'.
          ENDIF.
        ENDIF.
    When 'OK_EXIT'.
       Leave Program.
    When 'OK_CLEAR'.
      Clear : ZLT_MITA, ZLT_KUNDE, ZLT_AUFTRAG.
*              it_mita, it_kunde, it_auftrag,
      CALL FUNCTION 'DEQUEUE_EZLT_MITALOCK'
       EXPORTING
         MODE_ZLT_MITA       = 'E'
         MANDT               = SY-MANDT
         M1                  = ZLT_MITA-M1
*         X_M1                = ' '
*         _SCOPE              = '3'
*         _SYNCHRON           = ' '
*         _COLLECT            = ' '
ENDCASE.
endmodule.                 " USER_COMMAND_9000 INPUT
*&      Module user_cmd_9000 INPUT
*       text
module user_cmd_9000 input.
If sy-ucomm = 'OK_CANCEL'.
LEAVE PROGRAM.
ENDIF.
IF sy-ucomm = 'OK_EXIT'.
      LEAVE PROGRAM.
ENDIF.
endmodule.                 " user_cmd_9000 INPUT

How to populate data for 2LIS_40_REVAL, 2LIS_43_POSCAS and 2LIS_44_POSREC

Hi
How to populate data for 2LIS_40_REVAL, 2LIS_43_POSCAS and 2LIS_44_POSREC datasources at RSA3?
I'm very new to retail BI.
I think there is no setup tables for Retail infosources.
Any IDoc or BAPI activation is required or other procedure?
We are in BI-700 SAPKW70015 support pack R/3 side
and SAP_BW 700 Support pack SAPKW70016 &
BI_CONT 703 Support pack SAPKIBIIP9 BI side
Can anyone guide me how to load data?
Points assured
Thanks in advance
Ramana P

Dear Ramana,
There is no setup table for POSCAS and POSREC.This has to be popuated with a BADI Implementation.
As of PlugIns 2002_1_470 and 2002_2_470, POS data is update into BW the 2LIS_44_POSREC and 2LIS_43_POSCAS extractors using a BADI. To be able to update data into BW, the relevant implementation for the BADI must be activated in each case. You can activate the implementation in transaction SE19. The implementations are as follows:
POS_EX_REC_PI2003_1 for extractor 2LIS_44_POSREC
POS_EX_CAS_PI2003_1 for extractor 2LIS_44_POSCAS
Once the activation of BADI , create the back ground jobs for the 44 application and the data is pushed into Delta queue and it can be loaded into BI .
Hope this helps you.
Thanks,
Krishna Charan

How to populate data in PAY_PEOPLE_GROUPS table (People Group Flexfiled)

Hello
We are migrating the data from one oracle instance to another oracle instance which are in same version of Oralce Applications 11.5.10.2. As a part of migration can anybody let me know how to populate data in "People Group Key Flexfiled" (PAY_PEOPLE_GROUPS table), ideally I will create or update employee records from the source instance to destination instance, so while creating or updating the employee records in can pass people_group_id while calling to the assignment api but my question here is before passing group id to the api i should have the data populated in PAY_PEOPLE_GROUPS TABLE so that i can fetch the group id as per the combination and pass it in to the api.. please suggest...

Thanks for your information! by any chance do you have any sample code which will create/update assignments with People Group Flexfield; when i check "hr_assignment_api.update_emp_asg_criteria" it only has parameter to pass people group id and not having segments parameters to pass individual segments.
Also let me know the links if you have any for all HR API guide which will help me to develope the interfaces...
My requirement is we have two instances in which in one instance we are treating as source for HR which will be used to master for all HR related activities and we are planning to develope an interface which will bring master instance in sync with dummy instance.

On my mac when i click on pages, a new document doesn't open instantly but a window with my files open and then have to click on the left bottom new document in order to open one. How can i have directly a new document when i click on pages icon

On my mac when i click on pages, a new document doesn't open instantly but a window with my files open and then have to click on the left bottom < new document> in order to open one. How can i have directly a new document when i click on pages icon

How to open an existing Pages document?
Click Pages icon in the Dock to launch Pages.
When Pages is open, click File menu in the Pages menu bar.
Select “Open”.
When the select document dialog box opens up, highlight/select the document and click “Open”
at the bottom right corner of the dialog box.
s
https://support.apple.com/kb/PH15304?locale=en_US

How to populate values for a new field in target infoprovider

Hi Experts,
am new to BI. i would like to know on how to populate values for a new field in the target cube with start rotuine.In my case, i have a source infoprovider, which has 3 fields and a target infoprovider, which has 5 fields. i need to populate the new 2 fields in start routine. i dont want to populate using Field routine and am using 3.5 version. please assist with code on how to solve this issue.
Thank you,
Chitra.
Edited by: Chitra_BI on Jun 13, 2011 10:23 AM

Debug the standard code and see where the other fields are getting update. you can use the similar approach and area to code for the new field.
Regards,
Lalit Mohan Gupta.

How to use CrossReference and DVM in ODI &how to populate data into Xref

Can any one tell how to use Domain Value Maps and Cross Referencing in ODI?
DVM or Domain Value Map are created and used in ESB console of SOA suite.
My actual requirement is as follows:
The below steps describe loading data from ERP Application 1 to ERP Application 2.
1. The Source Application ERP APP1, populates the interface table using their native technology.
2. A job scheduler invokes the Source side ODI Package.
3. ODI then extracts the data from Source Interface table and populates the Target Interface table.
4. After populating the Target interface table the ODI populates the X-ref table with App 1 ID and generated common ID.
5. The ODI either deletes or updates the rows that were processed from the Source interface table.
6. On the Target Application ERP APP2, the native application extracts data from target interface table and populates target database there by generating ERP Application 2 ID.
7. A job scheduler on the Target application invokes the ODI package to populate the Application 2 ID onto the Xref table matching on the Common ID.
I just want to know :
1. How to populate data into the Xref table from Source datastore
2. And if data is successfully laoded from target datastore to actual base table of target then how to populate the target id into the cross reference table.

can anyone suggest me some answer, then it would be of great help?

How to populate data in TargetCube from SourceCube for a particular product/currency dimension selected in form1.

Hi,
Need help regarding Business rule scenario "How to populate data in "Target Form (plantype2)" from "Source Form(plantype1)" for a particular product/currency dimension combination selected in form1"
Scenario 1) : I have data for Product(Computer)/Currency(USD) dimension combination in Source Form
When i open Target Form and then select a Product(Computer)/Currency(USD) combination and then right click on form to invoke a Business rule to get data for this same product/currency combination from Source Form.
Scenario 2) : If there isnt any data in Source Form for product(Computer)/Currency(USD) combination, then the data for product(computer)/Currency(Default Currency) to be populated into Target Form.
The members in Currency Dimension (Shared Dimension) are USD & Default Currency.
Can anyone please help.
Thanks,
Rajkumar

Adding to what Celvin Kattookaran has said
You can either write a Business Rule / Calculation script with @XREF function and also you can check condition if there is data in USD then populate USD else "Default currency"
If you want that data in source to be available in target, then you can use @XWRITE in a rule from source cube to push the data to Target.
Amarnath
ORACLE | Essbase

How to populate data from table into datagrid in form

hi there. may i know how to populate data from a table into a datagrid? i have created a datagrid in a form using OLE's microsoft datagrid. i'm having problem to populate data from table into the grid. can i know how to do that? thanks

Not exactly. I want to enter input from form and the user can have all options to choose i.e. HIGH, MEDIUM or so on.
Suppose, you have option to select HIGH, MEDIUM or LOW and you can see all these options together. You select LOW and when you save, it is saves in the table as a value. So when you view the table again, it will show LOW as active and HIGH and MEDIUM are null.

How to populate data dynamically in WSelect web element.

How to populate data dynamically in WSelect web element. what is the syntax of WSelect web element to populate data from the database

Hi Jamie,
There is no Url to download ackage, instead the link is taking here
Crystal Reports webElements
Can you give me correct link?

How to populate data in a new page when user place mouse on table cell

Similar Messages

Maybe you are looking for