How to Populate  local variable values to tables like likp .

Hi..I have taken 3 local variables date1 date2 and date3 .How to populate them in table (likp-lfdat).In date1 i have dates of lfdat between 14/05 to 21/05 and date2 from 22/05 to 28/05 and date3 one more week.In o/p how can see data between these dates range only?

Use Where clause as:
WHERE
LFDAT IN DATE1
OR LFDAT IN DATE2
OR LFDAT IN DATE3.
Regards,
Anil

Similar Messages

  • How to use bind variable value for table name in select statement.

    Hi everyone,
    I am having tough time to use value of bind variable for table name in select statement. I tried &p37_table_name. ,
    :p37_table_name or v('p37_table_name) but none worked.
    Following is the sql for interactive report:
    select * from v('p37_table_name') where key_loc = :P37_KEY_LOC and
    to_char(inspection_dte,'mm/dd/yyyy') = :P37_INSP_DT AND :p37_column_name is not null ;
    I am setting value of p37_table_name in previous page which is atm_state_day_insp.
    Following is error msg:
    "Query cannot be parsed, please check the syntax of your query. (ORA-00933: SQL command not properly ended) "
    Any help would be higly appreciated.
    Raj

    Interestingly enough I always had the same impression that you had to use a function to do this but found out from someone else that all you need to do is change the radio button from Use Query-Specific Column Names and Validate Query to Use Generic Column Names (parse query at runtime only). Apex will substitute your bind variable for you at run-time (something you can't normally do in pl/sql without using dynamic sql)

  • How to populate multiple entries to Bapi Table

    Hi all,
      How to populate multiple entries to Bapi Table.....
    Here is the code(in component controller)
      Z_Recr_Apply_Point_Input request = new Z_Recr_Apply_Point_Input(WDModelScopeType.TASK_SCOPE);
           int  size = wdContext.nodeApplicants().size();
                for(int i = 0 ; i < size ; i++)
                    String isselected = wdThis.wdGetContext().nodeApplicants().getElementAt(i).getAttributeAsText("Appl_Number");
                     if(isselected == "true")
                               com.models.veteranpoint.Zrecr_Aplno appid = new
                                    com.models.veteranpoint.Zrecr_Aplno();                                        
                                    appid.setAppl_Number(wdContext.nodeApplicants().
                                        getApplicantsElementAt(i).getAppl_Number());
                               request.addApplicants(appid);
    I want to pass the selected input field to bapi..
    Please tel me where i pass the input field...
    Please correct my code...
    Thanks & regards
    Mathi s

    Hi,
    Steps to insert multiple entries to BAPI table.
    1.Create an instance for BAPI input
    2.Bind the instance to the Node of the BAPI input
    3.Create instance of the Structure(BAPI table) to which input has to be added.
    4.Set the input values to the Structure instance.
    5.Add the instance to the BAPI input.
    6.Execute
    From the given example,I assume Z_Recr_Apply_Point_Input  is the BAPI Input and com.epiuse.us.recruitment.models.veteranpoint.Zrecr_Aplno as Structure
    Step 1:
    Z_Recr_Apply_Point_Input request = new Z_Recr_Apply_Point_Input(WDModelScopeType.TASK_SCOPE);
    Step 2:
    <b>wdContext.nodeZ_Recr_Apply_Point_Input.bind(request);</b>
    Steps 3 & 4:
    int size = wdContext.nodeApplicants().size();
    for(int i = 0 ; i < size ; i++)
    String isselected = wdThis.wdGetContext().nodeApplicants().getElementAt(i).getAttributeAsText("Appl_Number");
    if(isselected == "true")
    com.epiuse.us.recruitment.models.veteranpoint.Zrecr_Aplno appid = new
    com.epiuse.us.recruitment.models.veteranpoint.Zrecr_Aplno();
    appid.setAppl_Number(wdContext.nodeApplicants().
    getApplicantsElementAt(i).getAppl_Number());
    <b>wdContext.currentZ_Recr_Apply_Point_InputElement().modelObject().addRecr_Aplno(appid);</b>
    Step 5:
    <b>wdContext.currentZ_Recr_Apply_Point_InputElement().modelObject().execute();</b>
    Regards,
    Viji Priya

  • How to populate the calculated value into screen field.

    I am doing one enhancement in QM.I have added one custom screen to notification transaction ( QM01/QM02/QM03) transaction tab strip control using the enhancement QQMA0001.The Details of the calling and called screens as shown bellow
    The Calling screen: SAPLIQS0
    Screen Number: 7790
    Screen Area :USER0001
    Called Screen: SAPLXQQM
    Screen Number: 0101
    I have developed the Custom Screen in screen 0101 and called in PBO of program SAPLIQS0 7790 screen.
    The Screen in calling perfectly .The Custom screen having different fields like Raw cost, Intermediate cost, Finished cost, SCAR Cost and Sales Order Cost Etc... These fields are out put filed types. No input for these screens.. I have few doubts regarding this
    How to populate the calculated values in Custom screen?
    Where we wrote the code to populate the calculated values in custom screen?
    You have any idea please guide me
    Thanks & Regards,
    Samantula

    As your screen fields should be global variables in SAPLXQQM, you may initialize them by implementing function module EXIT_SAPMIWO0_008 which also belongs to SAPLXQQM (Customer Exit: Transfer Notification Data to User Screen)

  • Unable to see local variable values when debugging java

    Hi,
    I am using JDev 10.1.2 with java version 1.4.2_04.
    I have been using JDev to debug my java programs. But suddenly from this morning I am unable to see local variable values. I am able to see class and instance variables. This has happened to me before and I had restarted my machine couple of time, to get this sorted. But this time, nothing helps. Going thru the forum I found out that Include Debug information (Project Properties -> Compiler Option) need to be turned ON. It is already turned ON for me.
    I would greatly appreciate if you could let me know how to crack this problem.
    Thanks in advance.

    No. The local variables 'used' to show up during debugging. But erratically it doesn't show up local variable values. I had to restart my machine couple of times whenever this happens, inorder to see the local variable values. But this time even restarting doesn't help.
    Is there any preference setup that need to be turned on/off to see local variables?
    Also I can't step into a static method now. Any idea why this happens?

  • How to pass session variable value with GO URL to override session value

    Hi Gurus,
    We have below requirement.Please help us at the earliest.
    How to pass session variable value with GO URL to override session value. ( It is not working after making changes to authentication xml file session init block creation as explained by oracle (Bug No14372679 : which they claim it is fixed in 1.7 version  Ref No :Bug 14372679 : REQUEST VARIABLE NOT OVERRIDING SESSION VARIABLE RUNNING THRU A GO URL )
    Please provide step by step solution.No vague answers.
    I followed below steps mentioned.
    RPD:
    ****-> Created a session variable called STATUS
    -> Create Session Init block called Init_Status with SQL
        select 'ACTIVE' from dual;
    -> Assigned the session variable STATUS to Init block Init_Status
    authenticationschemas.xml:
    Added
    <RequestVariable source="url" type="informational"
    nameInSource="RE_CODE" biVariableName="NQ_SESSION.STATUS"/>
    Report
    Edit column "Contract Status" and added session variable as
    VALUEOF(NQ_SESSION.STATUS)
    URL:
    http://localhost:9704/analytics/saw.dll?PortalGo&Action=prompt&path=%2Fshared%2FQAV%2FTest_Report_By%20Contract%20Status&RE_CODE='EXPIRED'
    Issue:
    When  I run the URL above with parameter EXPIRED, the report still shows for  ACTIVE only. The URL is not making any difference with report.
    Report is picking the default value from RPD session variable init query.
    could you please let me know if I am missing something.

    Hi,
    Check those links might help you.
    Integrating Oracle OBIEE Content using GO URL
    How to set session variables using url variables | OBIEE Blog
    OBIEE 10G - How to set a request/session variable using the Saw Url (Go/Dashboard) | GerardNico.com (BI, OBIEE, O…
    Thanks,
    Satya

  • How to set a variable value on the BPC Data Manager

    Hello BPC Experts,
    I'm creating a BPC10 NW version demo environment for our prospect customer.
    I made a data manager to import  BW data into BPC model from BW cube.
    I need to import just one month data into BPC from the BW cube that has more than one month data.
    When I run the data package manually, I can select a member of the time dimension prompt and I can import specific month data I want.
    But, in a case where the program (data manager) runs by JOB monthly,
    I can't select a member of the time dimension prompt manually.
    So I want to know how to set a  variable value to the time dimension prompt from a system date etc. automatically.
    Are there any way to set a variable value to the time dimension prompt on the data manager automatically from a system date?
    Or, do you have any other solution to import just one month data into BPC from the BW cube that has more than one month data  by the data manager running on JOB ?
    (without selecting a member of the time dimension prompt of the data package manually)
    Thanks in advance,
    Keisuke

    Hi Gersh
    Sorry for my late reply and thanks for your helpful information.
    I tried the second way of your information and I could configure it.  
    And I 'll try first way of your information.
    Regards,
    Keisuke

  • How to clear the variable value in session store?

    I'll try to build form for search. There are LOV and
    search button on form. When user don't select anything then push
    search button, I'd like the report to show query everything. I
    mean the report will show like condition where id like '%'.
    And I send variable between form to report by using session
    store.
    I select nothing in LOV but value that return by LOV is
    not null. It's in stead of old value of LOV.
    Please tell me.. How to clear the variable value in
    session store? I'd like to set it to null. If you have greater
    way to do like this, please tell me.
    Thank you.

    Please suggest on this..
    Thanks.

  • How to  pass a variable value into a custom planning function via a web

    Can some one tell me
    How to  pass a variable value into a custom planning function via a web template?
    What are the different types of Planning function parameters available and what is the difference between them?
    Thanks
    babu

    Hi Sutrtha,
    Yeah I got the pop up asking to select the variables used, I have selected ENTITY_ID that was used by the interfaces, but on execution of the package the Scenario did not work as the passeed variable #ENTITY_ID is set to 0 instead of the value I am passing.
    Am I missing something?
    Regards
    B

  • Tcode to populate data in to demo tables like SPFLI, SFLIGHT,SBOOK?

    Can you please let me know the tcode to populate data in to demo tables like SPFLI, SFLIGHT,SBOOK etc

    Run this program S_FLIGHT_MODEL_DATA_GENERATOR
    In ecc 6.0 this program is available? it is saying it does not exist.
    Regards,
    Vishwa.

  • BO Webi: How to populate a variable with the set of static values for Graph

    Hi All,
    I have the data: Order number, Order Date, processing time coming from the SAP Bex query in the below format:
    Order No    Order Date    Processing time (Days)
    1                 Jan-2011      4
    2                 Jan-2011      5
    3                 Feb-2011      6
    In BO webi report, I have to report the number of orders which were processed in <1day, <2days, <3days,...<10days in a graphical view. i.e., X-Axis:  <1day, <2days, <3days,...<10days(10 static buckets for the processing days)
    Y-Axis: Number of Orders.
    The graphical output should be like below:
    X-Axis: <1day, <2days, <3days,<4days,<5days,<6days,<7days,<8days,<9days,<10days
    Y-Axis: 0, 0,0,0,1,2,3,3,3,3  (count(Order No)) (Cumulative count)
    I am able to calculate the number of orders individually for each of the 10 buckets. But the problem i am facing is that I am not able to hold the 10 static bucket values in a variable to use it for the x-axis in the Graph, as these 10 static bucket values are not coming from the backend source.
    I would like to know if there is way to populate a variable(to use it for the X-Axis in the graph) with the set of 10 static values.
    Any help would be highly appreciated.
    Thanks,
    Leela

    Hi ,
    I think we can use the variable as X-axis in chart.. but Variable Qulaification should be Dimension.
    can you try this?.
    Using efasion universe
    1) Select month and Sold at (unit price) , then run the query
    2) create the variable V_Month ==If [Month]=1 Then "Month1" Else "Month2"  (Note = Variable Qulaification should be Dimension)
    3) Create the variable V_Sum= sum (Sold at (unit price))
    4) create another variable V_Cumulative_Sum==[V_Sum]+Previous([V_Sum])
    Now add V_Month and V_Cumulative_Sum in table , then convert to chart.. now you can add the variable V_Month as X-axis of the chart.
    Hope this will help:)
    Thanks
    Ponnarasu K

  • How come my local variable is not updating it's value with respect to what's happening in the while loop?

    Hello,
    I am trying to extract data out of a while loop as my declarations update with respect to the iteration number. I have attempted to use both local variables and shift registers, but with no luck.
    I have also done the following example: http://www.ni.com/white-paper/7585/en and it works like a charm.
    I attached the PNG file with local variable declaration circled in red. Will attach a VI in the next respnose.
    Thanks
    Solved!
    Go to Solution.
    Attachments:
    Local Variable.png ‏366 KB

    OK, looking at the code...
    Can you explain what it is supposed to do? What's the purpose of the value property node read which only seems to update an indicator.
    The inner while loop should proably be a FOR loop, because the number of iterations is known before the loop starts.
    Your use of formula nodes seems overly complicated.
    LabVIEW Champion . Do more with less code and in less time .

  • How to pass Temp variable value instead of Table name in From clause.

    Hi,
    I have an requirement to pass the Temperorary variable value instead of Table name in FROM Clause in SQL.
    But I am strugglint to pass this variable value.
    E.g., a Varchar2(5) := 'aa';
    Select * from a;
    Here I come to mention a - 'aa'. But the SQL looks for 'a' as Table. But its should look into 'aa' as Table name.
    Kindly guide me.
    Thanks.

    SQL> declare
      a     varchar2 (5) := 'emp';
      v     varchar2 (100);
      cur   sys_refcursor;
    begin
      open cur for 'Select ename from ' || a;
      fetch cur into v;
      while cur%found
      loop
        dbms_output.put_line (v);
        fetch cur into v;
      end loop;
      close cur;
    end;
    JAMES
    SCOTT
    SMITH
    ALLEN
    WARD
    JONES
    MARTIN
    BLAKE
    CLARK
    KING
    TURNER
    ADAMS
    FORD
    MILLER
    PL/SQL procedure successfully completed.

  • How to populate List Item from the table in a form builder

    I want to know how to populate the List Item (pop up menu and combo box) from a table.
    Supposing I have a table Customer(cust_id,cust_name)
    and now I want to populate it in such a manner that I can update the data back to the database and also access the list on the form.

    This is the method i am using to populate a list.
    1- First of all you need to create a non-database list item for customer_name.
    2-create this procedure
    PROCEDURE populate_list_with_query
    --Populates the given list item with the specified query.
    (p_list_item in VARCHAR2
    ,p_query in VARCHAR2)
    IS
    /* Name the record group after the list item (no
    block prefix). */
    cst_rg_name constant VARCHAR2(30) :=
    GET_ITEM_PROPERTY(p_list_item,item_name);
    v_rg_id RECORDGROUP;
    BEGIN
    v_rg_id := FIND_GROUP(cst_rg_name);
    IF ID_NULL(v_rg_id) THEN
    v_rg_id := CREATE_GROUP_FROM_QUERY(cst_rg_name,p_query);
    END IF;
    IF POPULATE_GROUP(v_rg_id) = 0 THEN
    POPULATE_LIST(p_list_item,v_rg_id);
    /* Force display of first list element label
    in the list item. */
    COPY(GET_LIST_ELEMENT_VALUE(p_list_item,1),p_list_item);
    END IF;
    END populate_list_with_query;
    3- Create When-Create-Record on the block level and write this code
    BEGIN
    POPULATE_LIST_WITH_QUERY('bk1.customer_name',
    'SELECT customer_name, to_char(customer_id) FROM customer');
    END;
    In this example, the customer name is the (visible) list label and the customer ID is the (actual) list value
    i hope this will solve your problem ...

  • How to declare local variables in PL/SQL stored programs

    Where do I declare local variables in a PL/SQL stored program?
    I get compiler errors with either of the options below:
    FUNCTION GET_PRINCIPAL_BALANCE (CUT_OFF_DATE IN DATE, TITLE_SN IN DATE, TOTAL_BALANCE OUT NUMBER) RETURN NUMBER IS
    TOTAL_BALANCE NUMBER;
    BEGIN
    RETURN TOTAL_BALANCE;
    END;
    FUNCTION GET_PRINCIPAL_BALANCE (CUT_OFF_DATE IN DATE, TITLE_SN IN DATE, TOTAL_BALANCE OUT NUMBER) RETURN NUMBER IS
    BEGIN
    TOTAL_BALANCE NUMBER;
    RETURN TOTAL_BALANCE;
    END;

    Your local variable cannot have the same name as the formal out parameter. This is a procedure example, but since functions should not have out parameters anyway ...
    session2> CREATE PROCEDURE p (p_id IN NUMBER, p_did OUT NUMBER) AS
      2     p_did NUMBER;
      3  BEGIN
      4     p_did := p_id * 2;
      5  END;
      6  /
    Warning: Procedure created with compilation errors.
    session2> show error
    Errors for PROCEDURE P:
    LINE/COL ERROR
    0/0      PL/SQL: Compilation unit analysis terminated
    1/1      PLS-00410: duplicate fields in RECORD,TABLE or argument list are
             not permittedThe proper way to create a function would be something like:
    CREATE FUNCTION f (p_id IN NUMBER) RETURN NUMBER AS
       l_did NUMBER;
    BEGIN
      l_did := p_id * 2;
      RETURN l_did;
    END;You should really assign a value to the variable before you return it.
    John

Maybe you are looking for