How to populate one array without running the entire VI

I'm trying to populate a complex array that I built that reads from a spreadsheet file. The company I am building it for only has labview run time on the PXI test equipment that I am working with. I am having to fix the VI On my computer then build an executable and then test it on the machine to see if it runs properly. It's a very tedious process. I cannot run the VI on my computer because it requires to have a FLUKE 726 connected in order to run. So, I was wondering if there is a way to repopulate the array without running the entire VI?
Your help would be greatly appreciated.

Create a subVI for reading/processing of the array. Then you just have to test that subVI as your machine.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Similar Messages

TS2755 I note with IOS8 that when I delete a msg from a thread it still shows up with the time as a recent msg. How do I remove this without deleting the entire thread?

I Note with the iOS8 update when I now delete a msg from a contact thread it still shows up with the time as a recent msg. How do I delete this from recent without deleting the entire thread?

BC
My understanding is that music syncing is a one way process from computer iTunes to your iPhone. I think what you are asking is to have IOS synching back to an OSX or PC system. The software doesn't work that way.
You either have to uncheck the songs to be synced or create a separate playlist for "BC Canada iPhone" and only sync that playlist.
As well any purchases you made on your iPhone need to be transferred to your iTunes so they can come back to your phone when you re-sync.
Hope this helps, even though it's not the answer you might have wanted.
Cheers

How to reordering a table without coloring the entire column ?

Hi,
When I click on a column header to re-order the table, the entire column is show in a differente color. Is there any way to avoid this behave ?
Thanks,
M�rcio

Javadoc for IWDNode says:
public void clearSelection()
    Clears the Node's multiple selection; does not change the lead selection.
public void setLeadSelection(int index)
    Sets the lead selection to the given index. It may be called with NO_SELECTION to reset (clear) the lead selection.
    Parameters:
        index - the index of the element
    Throws:
        ContextException - if caller tries to reset the selection, but selection is mandatory
        IndexOutOfBoundsException - if the given index is not within the element list
    See Also:
        getLeadSelection()
Armin

How to populate an array with random text files.

I am making a Jeopardy program. I have my program set up so that it retrieves 5 random text files. I just want to know how I populate one array with all the lines from the text files my program is retrieving.

You can read a textfile line by line and add each line to an ArrayList. An ArrayList is very much like an array only that it's "open ended". You can start adding lines without first knowing how many you're going to get. If you still want an ordinary "static" array when you're finished reading lines you can easily get one from the ArrayList and then drop the ArrayList.

I have two apple accounts on one computer. How do i delete one account without deleting the other?

I have two questions!!
I need to know how to delete one account without deleting the other account on the computer?
I am deleting the account because i have a new laptop that now has the my account... will deleting the account on one computer affect the account on the other laptop?

What do you mean by deleting the account? One can't delete an Apple ID/iTunes account. One just stops using it.
Since yo can only have five computer authorized for one iTunes account you might want to deauthorize the computer for that account
iTunes Store: About authorization and deauthorization

How can i print just one page of photo book without printing the entire book

how can i print just one page of photo book without printing the entire book

Jim,
Take heart. We can help.
First turn on page view so you can see how the content of your sheet fits on the page(s). A Numbers document contains sheets (listed on the left) which in turn contain tables, charts, text, and graphics. Select the sheet you want to print on the left, then enable page view by selecting the menu item:
"View > Show Print View":
Now you should see your content and how it fits on one, or more, pages. If thie content is too big for one page use the controls and the bottom left of the window to expose the sheet controls:
Here a table is too big to fit on one page:
slide the "Content Scale" slider so the content fits:

I would like to transfer a playlist and associated music from one computer on a home sharing network to another without transferring the entire library. How?

I would like to transfer a playlist and associated music from one computer to another in a home sharing network without transfering the entire itunes library. How would I do that?

you can transfer playlists using home sharing but it won't copy the actual music files within to the other machine.
however, i believe TuneRanger can do that.

I just got a replacement i phone and i was setting it up and I cannot restore it with my iTunes because the soft wear is to old how to i update the soft wear without running the process

I just got a replacement i phone and i was setting it up and I cannot restore it with my iTunes because the soft wear is to old how to i update the soft wear without running the process

Hi Balzer1313,
Thanks for visiting Apple Support Communities.
If you have an older version of iTunes installed on your computer, you can update it using this menu option:
Windows: Choose Help > Check for Updates.
Mac: Choose iTunes > Check for Updates.
From:
iTunes: How to install the latest version
http://support.apple.com/kb/ht5654
If iTunes is not installed on your computer, you can download it here:
http://www.apple.com/itunes/download/
Cheers,
Jeremy

How i can obtain explain plan without run the query

Hello,
i need to know the result of explain of a query without run the query, it's this possible?
Thanks and best regards.

explain plan for <your query>;
select * from table(dbms_xplan.display);Regards,
Rob.

How can i transfer videos without losing the sound to my iPhone 3G?

Hi
I have bought my iPhone 3G yesterday. I have found out how to transfer music from iTunes however i can't transfer videos. I'm selecting the videos i want to transfer on the videos tab after i chose my iphone from the side menu and pressing apply. iTunes says that its syncing my iphone but it doesnt transfer the videos.
Lately i have found out a function on the advanced menu for movies as "create iphone or ipod version". When i used that it transfered that video to my iPhone however the sound was completely lost besides that action takes too much time(around 10 mins for a 3 min video and i have a pretty strong computer).
How can i transfer videos without losing the sound to my iPhone 3G?

One thing I'd recommend is that you make sure the video/audio you're trying to transfer falls within the guidelines listed in the 'Video' section here:
http://www.apple.com/iphone/specs.html
What's most likely happening is that the file is not converted as such so when you try to transfer it, it's wanting to convert it but is unable to for any number of reasons.
There's software out there that might make this easier for you but I can't recommend anything specifically.

HT202213 Can multiple iPhones share one iTunes without syncing the phones together? We just got new iPhones and set up desperate apple id's, but don't know if we can both sync to our existing iTunes without linking our phones together (contacts, apps, etc

Can multiple iPhones share one iTunes without syncing the phones together? We just got new iPhones and set up seperate apple id's, but don't know if we can both sync to our existing iTunes without linking our phones together (contacts, apps, etc) ????

How to use multiple iPods, iPads, or iPhones with one computer

F110 run the payment run directly without running the proposal run first

Hello to you all,
Does any one know I do I block the option to run the payment run directly without running the proposal run first?
Thanks in advance,
Yoav

Hi
First delete the payment run output by the following :
Goto Edit on menu bar --> Payment --> Delete Output
then run the proposal run again and after that process payment run.

Urgent:How to modify a script without changing the print programme

Hi all,
Can any body pls tell me <b>How to modify a script without changing the print programme</b>
Give m esome real time examples.
Good points willbe rewarded
Thanks

Hi
You can write a external Subroutine to fetch the extra data into the script program
see the following sample code
How to call a subroutine form SAPscripts
The Form :
/:PERFORM CDE_CENT IN PROGRAM ZKRPMM_PERFORM_Z1MEDRUCK
/:USING &EKKO-EBELN&
/:CHANGING &CDECENT&
/:ENDPERFORM
The report :
REPORT zkrpmm_perform_z1medruck .
DATA : BEGIN OF it_input_table OCCURS 10.
INCLUDE STRUCTURE itcsy.
DATA : END OF it_input_table.
déclaration de la table output_table contenant les
variables exportées
DATA : BEGIN OF it_output_table OCCURS 0.
INCLUDE STRUCTURE itcsy.
DATA : END OF it_output_table.
DATA : w_ebeln LIKE ekko-ebeln,
w_vbeln LIKE vbak-vbeln,
w_zcdffa LIKE vbak-zcdffa.
FORM CDE_CENT
FORM cde_cent TABLES input output.
it_input_table[] = input[].
it_output_table[] = output[].
READ TABLE it_input_table INDEX 1.
MOVE it_input_table-value TO w_ebeln.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = w_ebeln
IMPORTING
output = w_ebeln.
SELECT SINGLE zcdffa FROM ekko
INTO w_zcdffa
WHERE ebeln = w_ebeln.
it_output_table-name = 'CDECENT'.
MOVE w_zcdffa TO it_output_table-value.
MODIFY it_output_table INDEX 1.
output[] = it_output_table[].
ENDFORM.
COPING SCRIPT
There are some Standard Sap Scripts in SAP. We cant directly execute them in scripts we have to use some T-codes and by giving some input to the required fields we can see the output printform.
I will show one example. There are some Standard Sap Scripts such as MEDRUCK which is a standard Sap Script for Purchase Order and RVINVOICE01 for billing and so on...
To see oupt of MEDRUCK go to T-code ME9F give purchase order number and execute select one number and click on dislplay messages button on application tool bar you can find the print form of MEDRUCK.
You cannot change the Standard Sap Scripts but you can use Standard Sap Scripts and Copy them to userdefined Script and can make changes to them and replace standard Sap Script with usedefind script.
Ex: Go to SE71,
on menu bar u find Utilities->copy from Client. click on it u ll find new screen showing
Form name:
Source Clinet:
Target Form:
give Form name as usedefined form name EX: ZFORM1
Source client as 000 and
Target form as MEDRUCK.
execute.
Now, the standard from MEDRUCK is copyied to your form ZFORM1.
NOW, go to SE71 and give form name as ZFORM1 and do some changes to the form such as adding logo any thing. save and Activate.
Now, you have done changes to the Form ZFORM1 and u have to replace your form with standard SAP Script.
Go to NACE Transaction.
on Applications select EF for purchase order and click Output types button on application tool bar.
now select NEU as output types dobule click on Processing Routines.
now click on Change option on application tool bar and on right side u find MEDRUCK in form place replace MEDRUCK with ZFORM1 and SAVE.
go back twice and now go to T-code ME9F give the purchase order number and execute and select one option and click on display messges button .
you will find the changes that you have done in ZFORM1. so we cant chage the standard Sap Scripts by copying the Standard Sap Scripts we can chage and replace with our forms
Refer
https://forums.sdn.sap.com/click.jspa?searchID=4089895&messageID=3239299
Regards
Message was edited by:
Kiran Sure(skk)

How do I restart apex without restarting the database?

As the title says... How do I restart apex without restarting the database?
For the second time in as many weeks apex 3.0.1(?) has stopped working while the database (10gR2) hasn't missed a beat.
How do I restart apex?
How do I get it to restart automatically on failure.
How do I receive failure notification messages.
How do I diagnose the cause of the failure.
We were looking at using apex in a production environment but the prospect of unplanned restarts of production databases every week is a little daunting.
Regards,
David

David,
>> We're not using oracle http server as it's a 64 bit version so yes the whole thing is running within the database.
1) So your Web server is the XDB HTTP protocol server and embedded PL/SQL gateway (basically, the database's embedded Web server)? Is this 11g? If so, what platform?
2) Are there any reported issues in the database alert log?
3) When you check the status of the database listener, does it show services running for this specific port (default 8080, I guess)?
4) If you normally go to http://server:port/apex, when this situation occurs, what happens when you try and go to http://server:port?
Joel

How could we do this without killing the system?

If we take in a file through the PI file adapter that has 1 million lines and read it in and process each line as a single transactionu2026 How could we do this without killing the system?

Hi,
>>>How could we do this without killing the system?
which system ? PI could do this if the transactions are small (only one line so very small I guess)
but I'm not sure about the ERP...
Regards,
Michal Krawczyk

How to populate one array without running the entire VI

Similar Messages

Maybe you are looking for