How to populate the address field in real time from backend?

Hi Guys,
I want to populate the address field in srm portal when creating Shopping Cart. I got the data by using some BADI functions. Now the problem is I am not getting the structure/table where I should add that address so that it can reflect in the address field of shopping cart.
Can anyone help me out?
Regards,
Virendra Kedia

Joe - Work backwards from the value generated during the execution of the trigger. You have the value there so you could save it into a package variable right then (create a package with a variable and assign the value to the variable). Then create a process on the page (after the DML process) to assign the value of your package variable to a page item. Then in the branch back to page 1, pass the item. (Or without messing with the branch, the process could simply assign the package variable directly the the page 1 item -- :P1_ITEM := my_package.my_var; ).
An alternative would be to use the "returning into" feature of DML to capture the PK of the created record into an item. Then the next page process could use the PK to fetch the new row and get the dbname value for passing to page 1.
Another option would be to update session state directly in the trigger.
Scott

Similar Messages

How to populate the TEXT field in MIGO

Hi folks,
While creating material document in MIGO or MB01, i am inserting some data in TEXT ( Field in line item level ). This text data is disappearing , once mat doc is created.
how to populate the TEXT field in MIGO?Is there any cusomisation?it's urgent .
Regards
pabi

Hello Pabitra,
I had a similar issue in my Project.
Please verify if the SMOD enhancement MBCF0002 (EXIT_SAPMM07M_001) is active in your system.
If this is the case, verify from two angles:
a) Whether the Enhancement was accidentally activated - If yes, then De-activate the same
b) If there is some logic coded in the User Exit, but, the Text is somehow not determined...even the existing content in the text field (input to EXIT_SAPMM07M_001) will get vanished.
Hope that your problem will be resolved by this. Pls reward points.
With Regards
Vijay Gajavalli

How to Hide the Parameter field at run time....

Hi,
I have a parameter field which behaves differently depending on the User logged in.
It has the LOV coming from following SQL.
SELECT customer_name FROM Cust_mast;
If the user = 'INTERNAL' then the Where clause will be
WHERE cust_id in('DELL', 'SBC', 'BANK')
Else there will be no WHERE clause or the parameter field
should be hidden in the parameter form.
So my questions are:
1) How to hide the Parameter field during Run time?
OR OR OR
2) How to change the LOV select statement during Run time?
Thanks.
Ram.

Hi Ram,
Is there any way to play with the sql query SELECT using DECODE ?I'm not sure of this part, maybe someone else can suggest a way.
However, what you want can be done in 2 other ways:
1. Build 2 reports. Both reports will just be duplicates of each other, only difference being that the 'LoV where clause' will be different. Now you can fire the appropriate report in many ways. For example, if the customer is alreay logged inside your custom application, and therefore you already know whether the user is internal of external, you can design your button or link which launches the report to contain logic such that one of the 2 reports is fired depending on who the user is.
1. Use a JSP parameter form, not a paper parameter form In this case, just build an HTML parameter form in the web source of your report. Use Java logic to populate the LoV drop-down list. When you have to launch the final report, just launch the paper-layout of the report. For example (you will have to modify this):
<form action="http://machine:port/reports/rwservlet?report=ParamForm.jsp+..." name="First" method="post">
<select name="selected_customer" onChange="First.submit()" >
<option value="">Choose a Customer Name
<rw:foreach id="G_cust_id" src="G_cust_id">
<rw:getValue id="myCustId" src="CUSTOMER_ID"/>
<rw:getValue id="myCustName" src="CUSTOMER_NAME"/>
<option value="<%=myCustId%>"><%=myCustName%>
</rw:foreach>
</select>
</form>
In the code above, you will have to make sure that your report's data model defines 2 CUSTOMER_ID's (like CUSTOMER_ID_INT and CUSTOMER_ID_EXT). These 2 will be internal and external Cust ID's. Use Java logic to show one of them.
Navneet.

How to hide the Parameter field during Run time?

Hi,
How to hide the Parameter field during Run time?
I have a parameter field which behaves differently depending on the User logged in.
I am using reports 10G
For ex: I have 3 field created in JSP
CUSTOMER
PROVIDER
FROM DATE
END DATE
If the user = 'SUPER show all the parameter
CUSTOMER
PROVIDER
FROM DATE
END DATE
If the user is 'GATEKEEPER" Just show
PROVIDER
FROM DATE
END DATE
Can I do that?
Please help
Thanks.
KK

hi, i'm not familiar much with JSP. but i think workaround is to create two window one which have 4 fields and the other which have 3. if user is SUPER then call the first screen otherwise if user is GATEKEEPER then call the second screen.

How to populate the logical_group field in V_LTDX (table for layouts)?

Hi,
Scenario:
I have implemented the ALV using CL_SALV_TABLE. In the grid we have a 'Choose Layout' button where we have the options of choose, change, manage etc. the layouts. If we create a layout, the layout is saved in the table LTDX(view: V_LTDX).
Issue:
How do we populate the 'Logical_group' field in the table while creating/changing the layouts?
Please suggest..
Regards
s@k

Solved..:)
Solution:
While creating the ALV grid, use the method 'get_layout' of the class CL_SALV_TABLE and get the reference of the layout in a reference variable.
Data:
gw_key TYPE salv_s_layout_key.
gr_layout = gr_grid->get_layout( ).
gw_key-report = sy-cprog.
gw_key-logical_group = gc_log_grp." Pass the logical group here say logical group: 0001, 0002, etc. for each ALV
So, whenever you create/ change a layout on the ALV grid, the system automatically passes this logical group and saves it in the table LTDX.
Regards
s@k

How to populate the new field of R/3 in BW

Hi,
There was a requirement to modify the sap screen in the R/3.
For the same a new field is created which populate the data via a table in R/3.
Now I have to populate the same field in BW. I am working on 3.5 Version.
In R/3 I have a data source and I am not able to see the same available in the data source
The field is available in the extract structure but I am unable to populate the same in the data source.
Kindly help.

The Data Source is picked from the FM.
Also,my requirement is to display the text values for the new field
I am going to create a Generic Master Data which will fetch the data from the table which has fields (Code, Langu and the text) and replicate the same to BW.
Now to populate the code in BW, I need to have the field in the data source and from there I can add the same code field in the bw comm/tran/etc...
The code is available in the Extraction and not in the data source.
At the reporting level I will extract the report based on key and text.
I tried using ROOSFIELD to populate the field in the datasource, but I am not able to do the same.

How to populate the Referance Field Through the Auto Invoice in credit memo

HI ,
I m populating the records in RA_INTERFACE_LINES_ALL and creates the cr Memo through the Auto Invoice ,
but i m like to populate the Referance Field which is exist in Header part of the Cr Memo (Benith the TYPE).
So plz help me,
that which column of the RA_INTERFACE_LINE_ALL populates ,that gave me a data in the Referance Field .
However this referance field is carried out from the table.Column =RA_CUSTOMER_TRX_ALL.ct_reference
Plz Help..
Regards,
DK

what you did?

How to populate the relavent fields when clicked on a field

I am trying to populate the relevant fields of screen(MODULE POOL PROGRAM) when i am
clicking on a field. Search help/ value request is provided to that field.
so Can any one help me with this scenario. IF POSSIBLE PLEASE SEND THE SOLUTION
WITH THE CODES.
POINTS WILL BE REWARDED.

Hi
use this for F4 help on field
For F4 Values on Screen:
PROCESS ON VALUE_REQUEST
using module call starting with FIELD i.e FIELD field MODULE module
There are number of function modules that can be used for the purpose, but these
can fullfill the task easily or combination of them.
DYNP_VALUE_READ
F4IF_FIELD_VALUE_REQUEST
F4IF_INT_TABLE_VALUE_REQUEST
POPUP_WITH_TABLE_DISPLAY
DYNP_VALUE_READ
This function module is used to read values in the screen fields. Use of this
FM causes forced transfer of data from screen fields to ABAP fields.
There are 3 exporting parameters
DYNAME = program name = SY-CPROG
DYNUMB = Screen number = SY-DYNNR
TRANSLATE_TO_UPPER = 'X'
and one importing TABLE parameter
DYNPFIELDS = Table of TYPE DYNPREAD
The DYNPFIELDS parameter is used to pass internal table of type DYNPREAD
to this FM and the values read from the screen will be stored in this table.This
table consists of two fields:
FIELDNAME : Used to pass the name of screen field for which the value is to
be read.
FIELDVALUE : Used to read the value of the field in the screen.
e.g.
DATA: SCREEN_VALUES TYPE TABLE OF DYNPREAD ,
SCREEN_VALUE LIKE LINE OF SCREEN_VALUES.
SCREEN_VALUE-FIELDNAME = 'KUNNR' . * Field to be read
APPEND SCREEN_VALUE TO SCREEN_VALUES. * Fill the table
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = SY-CPROG
DYNUMB = SY-DYNNR
TRANSLATE_TO_UPPER = 'X'
TABLES
DYNPFIELDS = SCREEN_VALUES.
READ TABLE SCREEN_VALUES INDEX 1 INTO SCREEN_VALUE.Now the screen value for field KUNNR is in the SCREEN_VALUE-FIELDVALUE and can be used for further processing like using it to fill the internal table to be used as parameter in F4IF_INT_TABLE_VALUE_REQUEST ETC.
F4IF_FIELD_VALUE_REQUEST
This FM is used to display value help or input from ABAP dictionary.We have to pass the name of the structure or table(TABNAME) along with the field name(FIELDNAME) . The selection can be returned to the specified screen field if three
parameters DYNPNR,DYNPPROG,DYNPROFIELD are also specified or to a table if RETRN_TAB is specified.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
TABNAME = table/structure
FIELDNAME = 'field name'
DYNPPROG = SY-CPROG
DYNPNR = SY-DYNR
DYNPROFIELD = 'screen field'
IMPORTING
RETURN_TAB = table of type DYNPREAD
F4IF_INT_TABLE_VALUE_REQUEST
This FM is used to dsiplay values stored in an internal table as input
help.This FM is used to program our own custom help if no such input help
exists in ABAP dictionary for a particular field. The parameter VALUE_TAB is used to pass the internal table containing input values.The parameter RETFIELD
is used to specify the internal table field whose value will be returned to the screen field or RETURN_TAB.
If DYNPNR,DYNPPROG and DYNPROFIELD are specified than the user selection is passed to the screen field specified in the DYNPROFIELD. If RETURN_TAB is specified the selectionis returned in a table.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = field from int table whose value will be returned
DYNPPROG = SY-CPROG
DYNPNR = SY-DYNNR
DYNPROFIELD = 'screen field'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = internal table whose values will be shown.
RETURN_TAB = internal table of type DDSHRETVAL
EXCEPTIONS
parameter_error = 1
no_values_found = 2
others = 3.
POPUP_WITH_TABLE_DISPLAY
This FM is used to display the contents of an internal table in a popup window.The user can select a row and the index of that is returned in the CHOISE
parameter.The VALUETAB is used to pass the internal table.
A suitable title can be set using TITLETEXT parameter. The starting and end position of the popup can be specified by the parameters STARTPOS_COL / ROW and ENDPOS_ROW / COL .
CALL FUNCTION 'POPUP_WITH_TABLE_DISPLAY'
EXPORTING
ENDPOS_COL =
ENDPOS_ROW =
STARTPOS_COL =
STARTPOS_ROW =
TITLETEXT = 'title text'
IMPORTING
CHOISE =
TABLES
VALUETAB =
EXCEPTIONS
BREAK_OFF = 1
OTHERS = 2.
e.g.
DATA: w_choice TYPE SY-TABIX.
DATA: BEGIN OF i_values OCCURS 0 WITH HEADER LINE,
values TYPE I,
END OF i_values.
PARAMETRS : id TYPE I.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR id
i_values-values = '0001'.
APPEND i_values.
i_values-values = '0002'.
APPEND i_values.
i_values-values = '0003'.
APPEND i_values.
i_values-values = '0004'.
APPEND i_values.
CALL FUNCTION 'POPUP_WITH_TABLE_DISPLAY'
EXPORTING
ENDPOS_COL = 40
ENDPOS_ROW = 12
STARTPOS_COL = 20
STARTPOS_ROW = 5
TITLETEXT = 'Select an ID'
IMPORTING
CHOISE = w_choice
TABLES
VALUETAB = i_values
EXCEPTIONS
BREAK_OFF = 1
OTHERS = 2.
CHECK w_choice > 0.
READ TABLE i_values INDEX w_choice....now we can process the selection as it is contained
...in the structure i_values.
Other FM that may be used to provide input help is HELP_START .
Regards
Anji

How to implement the Transfer Function in Real Time VIs?

Hi all,
I'm relatively new to Labview Real Time modoule and want to implement one Controller(not PID one) in Deterministic Loop! I have already designed discrete Transfer Function and searching for the way to build one Controller with it! Is it right to use the Simulation Loop instead of Timed Loop (in this case Deterministic loop) and implement the controller in it?! If it's correct so, should I use the same clock and Priod as Timed Loop?!
It would be very helpful, if there is an Example about using transfer function in Real Time Loops!
thanks for your help,
Mohsen

Hello mhmdi,
Sorry I can't open your VI (looks like it is a new version of LV than I have installed).
You're right - you don't need to convert to a difference equation if you have the CD&SIM Module which can take discrete time transfer functions directly. You don't need shift registers with this function, as it is effectively done internally. If you don't have CD&SIM discrete TF's can be implemented easily just in a timed (or while) loop with feedback nodes or shift registers to replicate each z-1 you need.
Some more ideas:
There are many configuration parameters and options with the Discrete TF VI - which you need to understand for your application and make sure are correct. Sometimes implementing in a basic form (timed loop and shift registers) allows you to see what is happening without any confusing options you might not need.
Are you using the Discrete TF VI in a Simulation Loop ? You might need to think if the loop being used is appropriate for a Real Time application. Maybe the timing of the TF, the loop and the DAQmx data are not all suitable for each other.
I'm not familar with DAQmx, so not sure about any specific real-time aspetcs of that.
"if the sample frequency of the discrete transfer function in the timed-loop is at multiple integers of the sampling rate (e.g. 12000 Hz for tranfer function and 4000 Hz for sampling rate, 12000=3*4000), would it somehow improve the resolution of the controller command?"
This could actually make things worse - but depends on your transfer function if it is a problem. Think about it this way - in the scenario you state the input signal going into the Discrete TF will only change once in every three samples, that means if your transfer function includes a 1-z^(-1) factor (i.e. a derivative) - that will be zero for two samples then jump up for the next sample. You'll observe a very jittery/noisy signal, but the noise is due to samples not being correct. This will also occur if the sample times are very similar but go in and out of sync where you may get the occassional sample that is the same and hence the occassional zero in the TF.
In an application I had we had problems trying to get the data coming into a timed loop and the timed loop itself synchronise, and before it was fixed the control signal was very jittery.
Consultant Control Engineer
www-isc-ltd.com

How to populate a text field by some value from table in Oracle seeded page through Personalization?

I have to populate Description field by default in AGIS page (Advanced Global Intercompany System).
Field Description:
messageTextInput: Description
VO: FunTrxHeaderVO
VO Attribute: Description
VO is entity based.
Now if the field is null then I have to populate this value by some value from table for selected batch_id.
Example:
(SELECT DESCRIPTION FROM fun_trx_batches WHERE batch_id =
211061)
Also, this value is being populated in the Batch Information region in the same page. So the problem is also be treated as to copy a value from one messageStyledText to messageTextInput in a same page.
Can this be done through personalization, w/o coding?
Please suggest if you any idea how to resolve..
Regards,
Pahari

Not sure why it is not displying in the front page list??
I have to search it.
Admin team, please help.
Regards,
Pahari

How to configure the Reference Field of BKPF-AWKEY from FI Doc MIRO?

Hi All
From my testing, I found out that this field (BKPF-AWKEY) is used to store doc reference of the docs, where this transaction was actually originated.
In case of MIRO, BKPF-AWKEY = MM inv doc no + MM inv year.
I know where to find the path to define AWKEY for BKPF in SPRO. However, I am more interested to know the path as of what combination to put in for this field for the configuration.
Thanks.

Hi,
You cannot configure the logic for this field; it's hardcoded in the core processes.
Regards,
Eli

How to load the object library at run time from within the script.

What i am trying to do from my library is that I wanted to load the object library file (.properties) file at run time through the script. I know that open script has a deprecated method "ft.loadObjectLibrary". Is there any other method other than the deprecated one?. Also is there a way that I can unload the library?
Thanks,
Sri

Object.border.fill.color.value = "255,255,255";
if you want to use rawValue of textfields to insert in there you will have to do
Object.border.fill.color.value = R.rawValue + "," + G.rawValue + "," + B.rawValue

Populate the customer fields (ORDERS05)

Hi all,
I'm trying to extend basic IDOC type ORDERS05 with these extra fields:
Table   Fields
VBRK     KUNAG (Sold to customer number)
VBRP     EAN11
VBRK     FKDAT
VBKD     BSTDK
VBRP     FKIMG
VBRP     VRKME
VBRK     ERDAT
VBKD     FKDAT
T052     ZPRZ1
How to enhance the IDOC?
How to populate the customer fields that I added?
Thanks,
Srini

Refer:
Re: Very urgent.. Orders05.

Populate all address fields to the customer master (DEBMAS06) IDOC

Hi All,
We have requirement to extend the customer master IDOC 'DEBMAS06' to add the address fields i.e (ADRC-STR_SUPPL3,STR_SUPPL4,STR_SUPPL5). Can any one tell me the suitable EXITs or BADI's to populate these fields street3, street4 and stree5 to the customer master. Otherwise can any one tell me how to over come this problem.
Thanks in advance
K N C

Dear Matthias,
I only can confirm the following statements (regarding information from development department):
- it is not possible with GuiXT
- it is not possible via a transaktion variant
- there exists no screenvariant with this functionality
-> modification is the only possibility.
Regards,
Andreas

How to populate the field Discount Percent (DIS) in the outbound S1ORDEXC?

Hello all,
I am working with the Spec2000 to send out the IDOC S1ORDEXC.
Does anyone know how to populate the field Discount Percent (DIS)?
This field length of Discount Percent is 2 characters, but our customer discount in the Princing Conditions (Sales Order) is longer than 2 characters (ex: 7.500-%)
Thank you

Hello Thuan
I guess you are working with IS- ADEC and SPEC 2000. I am not an expert on this but leave you some hints from OSS notes I came across.
It appears like Discount Percent - DIS and Procurement Discount Percent -PDP are complementary and mutually exclusive. If one exists, the other need not.
Looks like DIS is computed as (100-PDP)/100 and it is just a 2- integer data (as in 20 Percent). It is a kind of multiplier (Factor), example if PDP discount is 10 percent, then DIS (Factor) is 0.9 and so final (net) price after discount = Price*0.9.
" If the discount comes in the S1BOOKED inbound into SD in the field DIS, then the discount has to be sent back in the DIS field .. if it came in the PDP field then it has to be sent back in the PDP field. If there was no discount in the incoming IDoc, then the discount has to be filled in the PDP if there was a change in the discount".
KDATE in SPEC 2000 file maps to DIS and KPERC to PDP.
PDP has 4 characters and per OSS note 440380, the point is ignored meaning you can work with 1225 instead of 12.25.
So may be you can work with PDP?
OSS notes: Apply to older releases but may still be applicable conceptually speaking.
456153 - S1ORDEXC does not send out Discount
440380 - PDP has only 4 characters in the SPEC IDoc instead of 5
596042 - Discount percent DIS not considered e processing S1ORDEXC
698668 - Incorrect calculation of unit price for PO item by S1ORDEXC
Let me know you final findings.

How to populate the address field in real time from backend?

Similar Messages

Maybe you are looking for