How to print/list all the groups/users present in Weblogic using Java code

Hi,
Weblogic version : 11.1.1.5
How to print/list all the groups/users present in Weblogic using Java code
I want to make a remote connection to Weblogic server and print all the users/groups present in it.
I have gone through the below mentioned site, but I cannot use the same approach since most of the API' are deprecated for example "weblogic.management.MBeanHome;"
http://weblogic-wonders.com/weblogic/2010/11/10/list-users-and-groups-in-weblogic-using-jmx/
Thanks in advance,
Edited by: 984107 on 05-Feb-2013 05:26
Edited by: 984107 on 05-Feb-2013 22:59

see this http://www.techpaste.com/2012/06/managing-user-groups-wlst-scripts-weblogic/
Hope this helps.

Similar Messages

How can I list all the domains configured for Weblogic Servers?

How can I list all the domains configured for Weblogic Servers?
I saw a note, which says the following:
"WebLogic Server does not support multi-domain interaction using either the Administration Console, the weblogic.Admin utility, or WebLogic Ant tasks. This restriction does not, however, explicitly preclude a user written Java application from accessing multiple domains simultaneously."
In my case, I just want to list all the domains, is that possible by using any scripts?
Thanks
AJ

If you use WLS Node Manager and the Config Wizard was used to create the domains, then the list of domains should be in a location like this:
<MIDDLEWARE_HOME>\wlserver_10.3\common\nodemanager\nodemanager.domains
Enterprise Manager Grid Control also has support for multi-domain management of WLS in a console.

How can we find all the available user-exits in sap without using SMOD?.

How can we find all the available user-exits in sap without using SMOD?.

Hi,
Please check this links for user exits list.
http://www.planetsap.com/Userexit_List.htm
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/ab038.htm
Regards,
Ferry Lianto

How do i track all the apps installed on my iphone using icloud

How do i track all the apps installed on my iphone using icloud

I'm not sure what you mean by "track". Your purchased apps can be viewed on your devices or in iTunes from "iTunes in the Cloud" (and downloaded if desired), as explained here: http://support.apple.com/kb/ht2519.

How to get the values from struct data type using java code..?

Hi ,
I am newer to java.
we are using oracle database.
How to get the data from struct data type using java code.
Thanks in Advance.
Regards,
kumar

Hi Rajeev,
To retrieve a FilterContainer you will need to traverse the report structure:
ReportStructure boReportStructure = boDocumentInstance.getStructure();
ReportContainer boReportContainer = (ReportContainer) boReportStructure.getReportElement(0);
FilterContainer boFilterContainer = null;
if (boReportContainer.hasFilter()) {
boFilterContainer = boReportContainer.getFilter();
} else {
boFilterContainer = boReportContainer.createFilter(LogicalOperator.AND);
Calling boDocumentInstance.getStructure() will retrieve the entire structure for the document.
Calling boReportStructure.getReportElement(0) will retrieve the structure for the first report of the document.
Hope this helps.
Regards,
Dan

How to insert text in the middle of an existing textfile using java

Hi,
How to insert text in the middle of an existing textfile using java i/o streams??

Mickie wrote:
I shudn't delete the file...Then you will have the old file and the new file - do you want that?
and I have to insert text not only at a single place ....got to do at many places in the text file!!then extrapolate on the procedure outlined in reply #1 .

My moms computer died we are putting the old drive into the new computer as a slave drive. how do I transfer all the bookmarks, user names and passwords from the old drive to the new drive?

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/889318]]</blockquote>
Hello,
Sorry if this posted twice I am NEW. I thought I could just go back to what I typed and add to it. Mom had a computer it died they are putting in the old drive on the new computer as a slave. What are the steps I need to do to transfer ALL the bookmarks, user names and passwords onto the new computer. We will have 3 desktops do we have to do the same steps on each desktop? I do not want to re enter all the user names and passwords on the new hard drive. Old computer was Windows XP the new computer is Windows 7 Kathryn Schwartz

Duplicate - https://support.mozilla.com/en-US/questions/889318

How can I list all the column names of a table by programming?

Hi,
Now I want to write an function which has the following features:
Firstly, The function was given a parameter as table name.
Then, it will lists all the columns names of the table.
e.g
table: person
---firstName------lastName----+
       Michale               Jackson
We can get the columns 'firstname' and 'lastName' by calling the function with table name 'person'.
And I also wonder that where I can get reference book or any other materials?
Thanks.
Edited by: wenjing wang on Feb 15, 2008 6:42 AM
Edited by: wenjing wang on Feb 15, 2008 6:57 AM

hi,
hope the below code helps u. Just take the headee which contains the field name and split it like below and compare it with the field name u want here 'last name'.
here,
'First name' will be in wt_filedata1 and remaining field names in wt_filedata2, so 'do' continues.
c_tab must be the separator, either , or + or tab etc..
CODE:
read table person into wl_header index 1.
do.
    split wl_header at c_tab into: wt_filedata1 wt_filedata2.
    if wt_filedata1 <> 'lastname'.
      cnt1 = cnt1 + 1.
      wl_header = wt_filedata2.
    else.
      exit.
    endif.
enddo.
Please reward if it is useful.
regards,
sri

How to Invoke bpel process which is deployed in weblogic using java code

Hi
I want to invoke a BPEL Process which is deployed in Weblogic server using Java code. Please provide me the code snnipet which will be used to connect and then invoke a BPEL Process.

The simple way would be creating a java client to consume the SOAP webservice interface exposed by the bpel process.
If you have Oracle Service Registry you can also use UDDI to discover the endpoint at runtime.
But you can also use direct binding to do that.
If you search on internet you will find many blog entries about this as well as many related posts here on OTN.
I can't suggest a specific one, but looking on Google this one seems quite ok: Managing Oracle SOA Environment [10g/11g]: Invoking SOA11g Composite Using Direct Binding Invocation API

Why doesn't 'groups' list all the groups I'm in

When I create a new group and add myself to that group as superuser, command 'groups' doesn't list that group among others. It lists just those that I've been initially in (when creating my user via 'adduser'). Example:
# groupadd [group]
# gpasswd -a [user] [group] /OR/ usermod -G [group] [user]
# exit
$ groups
The group and only this group is visible if I do this (besides uid, gid and groups values):
# id [user]

and ...
using the usermod-command, you need the -a option, ie
usermod -a -G {group} {user}
Otherwise you will only have the given {group} in addition to your default group.

When I sign in to some web sites, if I type a letter, then all the erroneous user names I have used appear for me to choose from, including some I would not others to see. I have deleted cookies and the cache. That did not work. How do I stop this?

I don't know any more details

If you want to remove saved form data from a drop down list then use these steps:
#Click the (empty) input field on the web page to open the drop down list
#Highlight an entry in the drop down list
#Press the Delete key (on Mac: Shift+Delete) to remove it.
*http://kb.mozillazine.org/Deleting_autocomplete_entries
*Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
*https://support.mozilla.org/kb/make-firefox-remember-usernames-and-passwords

How to get the filters of Webi document/Report using Java code in XI SDK.

Hi All,
   I have a requirement where i have to extrcat filters from the Webi Document.using java SDK.
I am trying to find the class called "filterable"but not able to use in my java code and will get always
"java.lang.ClassCastException com.businessobjects.wp.om.OMDocument cannot be cast to com.businessobjects.rebean.wi.Filterable"
I am using the below java code like
ReportElement re=document.getStructure()
FilterContainer flt=((Filterable) re).getFilter()
I am stuck and need this in uregent.
Please help.

Hi Rajeev,
To retrieve a FilterContainer you will need to traverse the report structure:
ReportStructure boReportStructure = boDocumentInstance.getStructure();
ReportContainer boReportContainer = (ReportContainer) boReportStructure.getReportElement(0);
FilterContainer boFilterContainer = null;
if (boReportContainer.hasFilter()) {
     boFilterContainer = boReportContainer.getFilter();
} else {
     boFilterContainer = boReportContainer.createFilter(LogicalOperator.AND);
Calling boDocumentInstance.getStructure() will retrieve the entire structure for the document.
Calling boReportStructure.getReportElement(0) will retrieve the structure for the first report of the document.
Hope this helps.
Regards,
Dan

How to list all the Fields for an Active Directory Object

How do I list all the fields that an Active Directory object contains? I know the most common ones, but would like to enumerate through all the fields and obtain the type of fields and their values...

Here is my complete code - I only put snippets so that the post was not too huge...
Option Explicit
Const ADS_SCOPE_SUBTREE = 2
Const ForReading = 1, ForWriting = 2, ForAppending = 8
Dim adoCommand, adoConnection, adoRecordSet
Dim dtmDate, dtmValue
Dim j
Dim lngBias, lngBiasKey, lngHigh, lngLow, lngValue
Dim objADObject, objClass, objDate, objFile, objFSO, objRootDSE, objShell
Dim pathToScript
Dim strAdsPath, strConfig, strDNSDomain, strHex, strItem, strProperty, strValue
Dim strFilter, strQuery
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set objShell = CreateObject("Wscript.Shell")
pathToScript = objShell.CurrentDirectory
Set objFile = objFSO.CreateTextFile(pathToScript & "\TestAD.csv")
' Determine Time Zone bias in local registry.
' This bias changes with Daylight Savings Time.
lngBiasKey = objShell.RegRead("HKLM\System\CurrentControlSet\Control\TimeZoneInformation\ActiveTimeBias")
If (UCase(TypeName(lngBiasKey)) = "LONG") Then
lngBias = lngBiasKey
ElseIf (UCase(TypeName(lngBiasKey)) = "VARIANT()") Then
lngBias = 0
For j = 0 To UBound(lngBiasKey)
lngBias = lngBias + (lngBiasKey(j) * 256^j)
Next
End If
' Determine configuration context and DNS domain from RootDSE object.
Set objRootDSE = GetObject("LDAP://RootDSE")
strConfig = objRootDSE.Get("configurationNamingContext")
strDNSDomain = objRootDSE.Get("defaultNamingContext")
Set adoCommand = CreateObject("ADODB.Command")
Set adoConnection = CreateObject("ADODB.Connection")
adoConnection.Provider = "ADsDSOObject"
adoConnection.Open "Active Directory Provider"
adoCommand.ActiveConnection = adoConnection
adoCommand.CommandText = "SELECT * FROM 'LDAP://" & strDNSDomain & "'WHERE objectClass=user'"
adoCommand.Properties("Page Size") = 1000
adoCommand.Properties("Searchscope") = ADS_SCOPE_SUBTREE
Set adoRecordSet = adoCommand.Execute
Set adoRecordSet = adoCommand.Execute
adoRecordSet.MoveFirst
Do Until adoRecordSet.EOF
strAdsPath = adoRecordSet.Fields("ADsPath").Value
' Bind to Active Directory object specified.
Set objADObject = GetObject(strAdsPath)
Set objClass = GetObject(objADObject.Schema)
' Write which object is grabbed from AD
objFile.Write(Replace(strAdsPath, ",", ";;;"))
' Enumerate mandatory object properties.
For Each strProperty In objClass.MandatoryProperties
On Error Resume Next
strValue = objADObject.Get(strProperty)
If (Err.Number = 0) Then
On Error GoTo 0
If (TypeName(strValue) = "String") Or (TypeName(strValue) = "Long") Or (TypeName(strValue) = "Date") Then
objFile.Write("," & strProperty & "|||" & Replace(CStr(strValue), ",", ";;;"))
ElseIf (TypeName(strValue) = "Byte()") Then
strHex = OctetToHexStr(strValue)
objFile.Write("," & strProperty & "|||" & CStr(strHex))
ElseIf (TypeName(strValue) = "Variant()") Then
For Each strItem In strValue
On Error Resume Next
objFile.Write("," & strProperty & "|||" & Replace(CStr(strItem), ",", ";;;"))
If (Err.Number <> 0) Then
On Error GoTo 0
objFile.Write("," & strProperty & "|||Value cannot be displayed")
End If
On Error GoTo 0
Next
ElseIf (TypeName(strValue) = "Boolean") Then
objFile.Write("," & strProperty & "|||" & CBool(strValue))
Else
objFile.Write("," & strProperty & "|||Type:" & TypeName(strValue))
End If
Else
Err.Clear
sColl = objADObject.GetEx(strProperty)
If (Err.Number = 0) Then
For Each strItem In sColl
objFile.Write("," & strProperty & "|||" & CStr(strItem))
If (Err.Number <> 0) Then
objFile.Write("," & strProperty & "|||Value cannot be displayed")
End If
Next
On Error GoTo 0
Else
Err.Clear
Set objDate = objADObject.Get(strProperty)
If (Err.Number = 0) Then
lngHigh = objDate.HighPart
If (Err.Number = 0) Then
lngLow = objDate.LowPart
If (lngLow < 0) Then
lngHigh = lngHigh + 1
End If
lngValue = (lngHigh * (2 ^ 32)) + lngLow
If (lngValue > 120000000000000000) Then
dtmValue = #1/1/1601# + (lngValue / 600000000 - lngBias) / 1440
On Error Resume Next
dtmDate = CDate(dtmValue)
If (Err.Number <> 0) Then
objFile.Write("," & strProperty & "|||<Never>")
Else
objFile.Write("," & strProperty & "|||" & CStr(dtmDate))
End If
Else
objFile.Write("," & strProperty & "|||" & FormatNumber(lngValue, 0))
End If
Else
objFile.Write("," & strProperty & "|||Value cannot be displayed")
End If
Else
On Error GoTo 0
objFile.Write("," & strProperty)
End If
On Error GoTo 0
End If
End If
Next
' Enumerate optional object properties.
For Each strProperty In objClass.OptionalProperties
On Error Resume Next
strValue = objADObject.Get(strProperty)
If (Err.Number = 0) Then
On Error GoTo 0
If (TypeName(strValue) = "String") Then
objFile.Write("," & strProperty & "|||" & Replace(CStr(strValue), ",", ";;;"))
ElseIf (TypeName(strValue) = "Long") Then
objFile.Write("," & strProperty & "|||" & Replace(CStr(strValue), ",", ";;;"))
ElseIf (TypeName(strValue) = "Date") Then
objFile.Write("," & strProperty & "|||" & Replace(CStr(strValue), ",", ";;;"))
ElseIf (TypeName(strValue) = "Byte()") Then
strHex = OctetToHexStr(strValue)
objFile.Write("," & strProperty & "|||" & CStr(strHex))
ElseIf (TypeName(strValue) = "Variant()") Then
For Each strItem In strValue
On Error Resume Next
objFile.Write("," & strProperty & "|||" & Replace(CStr(strItem), ",", ";;;"))
If (Err.Number <> 0) Then
On Error GoTo 0
objFile.Write("," & strProperty & "|||Value cannot be displayed")
End If
On Error GoTo 0
Next
ElseIf (TypeName(strValue) = "Boolean") Then
objFile.Write("," & strProperty & "|||" & CBool(strValue))
Else
objFile.Write("," & strProperty & "|||Type:" & TypeName(strValue))
End If
Else
Err.Clear
sColl = objADObject.GetEx(strProperty)
If (Err.Number = 0) Then
For Each strItem In sColl
objFile.Write("," & strProperty & "|||" & CStr(strItem))
If (Err.Number <> 0) Then
objFile.Write("," & strProperty & "|||Value cannot be displayed")
End If
Next
On Error GoTo 0
Else
Err.Clear
Set objDate = objADObject.Get(strProperty)
If (Err.Number = 0) Then
lngHigh = objDate.HighPart
If (Err.Number = 0) Then
lngLow = objDate.LowPart
If (lngLow < 0) Then
lngHigh = lngHigh + 1
End If
lngValue = (lngHigh * (2 ^ 32)) + lngLow
If (lngValue > 120000000000000000) Then
dtmValue = #1/1/1601# + (lngValue / 600000000 - lngBias) / 1440
On Error Resume Next
dtmDate = CDate(dtmValue)
If (Err.Number <> 0) Then
objFile.Write("," & strProperty & "|||<Never>")
Else
objFile.Write("," & strProperty & "|||" & CStr(dtmDate))
End If
Else
objFile.Write("," & strProperty & "|||" & lngValue)
End If
Else
objFile.Write("," & strProperty & "|||Value cannot be displayed")
End If
Else
On Error GoTo 0
objFile.Write("," & strProperty & "||| ")
End If
On Error GoTo 0
End If
End If
Next
objFile.WriteLine("")
adoRecordSet.MoveNext
Loop
objFile.Close
' Function to convert OctetString (Byte Array) to a hex string.
Function OctetToHexStr(arrbytOctet)
Dim k
OctetToHexStr = ""
For k = 1 To Lenb(arrbytOctet)
OctetToHexStr = OctetToHexStr _
& Right("0" & Hex(Ascb(Midb(arrbytOctet, k, 1))), 2)
Next
End Function
I have been able to obtain all the Computer, Contact, Group and OU objects without issue with this code...

How to easily find all the relationship between group and reports in OBIEE

Hi, All:
I am working with a production env which contains many group and reports.
I want to know if there is a quick way to export the relationship between all the group/users and all the reports/page/etc.
Thank you for the kind help.

Thanks so much !
May be you can suggest a way around what I trying to achieve. I migrated(imported) one BA from our Prod system to an R12 VIS demo system into the pre-existing APPS EUL as owner SYSADMIN. When I login as SYSADMIN I see all the workbooks(the ones that were migrated from PROD and the ones shipped with VIS). I am interested only in the Workbooks that I migrated from Prod System. There are 100's of migrated workbooks. I was thinking of creating another APPS user and grant this newly created user ADMIN privileges on the migrated BA and transfer ownership of all migrated WORKBOOK. This way when I login as the newly created user I will only see the migrated Workbooks. How do I automate the process to seperate them using SQL or otherwise
Thanks
Bismi

How can i print lists from the reminder app

Does anybody know how to print lists from the Reminder app ?

There's no print menu in Reminders.
You can take a screen shot and print that. Hit command-shift-3 when Reminders is showing, then hit the spacebar, and then click on the Reminders window and you'll get a screen shot on your desktop. You can then open that in Preview and print from there.
A better solution though is to just use an iPhone and sync, and have your reminders with you :-)

How to print/list all the groups/users present in Weblogic using Java code

Similar Messages

Maybe you are looking for