How to process decimal field in extract

Hi All
I need to use a extract in TableMaintenace event.
I understood using loop and indexing, we can access teh fileds.
But when i checked in the Debugging mode, Decimal values in hte table are displayed as ####. How to get these decimal fields.
Could someone please clarify this?

Increase the field length for you decimal field.
If that doesn't work define the field as an alpha field.

Similar Messages

How to get the field COMPLETION in extract layout

Hi,
Does anyone knows How to get the field COMPLETION in extract layout? i have not been able to find it and it is imperative to have it for implementing a new evaluation.
Thanks a lot for your help.
CAMILO URIBE

Hi Neil,
The following steps describe what we did to get the new evaluation:
1. Define Attributes and Object Types for Evaluations: here we added a new field for evaluation. The field was COMPLETION (degree of processing in percent), with relevant object "TASK". "No Summarization" was configurated as Rule for Summarization
2. Define Extract Layouts: here we created a new extract layout for evaluation. The objects and attributes to be used were defined (the field COMPLETION was defined as attribute).
3. Assign Extract Layouts to Project Types.
4. Define Evaluations: the new layout for evaluation were created using the attributes.
5. Define Severity.
6. Define Threshold Values. In the new evaluation the field COMPLETION was used in the formula.
After configurating and testing, we have noticed that the values of field COMPLETION are not taking into account. It does not matter which value it has, evaluation always take 0.
Thanks for your help,
CAMILO URIBE

How to map journal fields and whats is the better process type

/Journal/JournalSuspenseCostCentre     NULL
/Journal/JournalBalancingCentre     Lookup from Organisation ID
/Journal/JournalMultiCompany     u2018Nu2019
/Journal/JournalBatchNumber     NULL
/Journal/JournalNumTransactions     Total number of /Journal/JournalLine transactions
/Journal/JournalBaseDRTotal     Sum of /Journal/JournalLine/JournalLineBaseValue u2013 Debit Values only
/Journal/JournalBaseCRTotal     Sum of /Journal/JournalLine/JournalLineBaseValue u2013 Credit Values only
How to map journal fields and whats is the better process type idoc/proxies?please let me know
Journal Line
Multiple journal lines per header:
Schema Element     Data
/Journal/JournalLine/JournalLineCostCentre     Bank account control Cost Centre
/Journal/JournalLine/JournalLineAccount     Bank account control Account Code
/Journal/JournalLine/JournalLineMoneyTotal     Transaction Line Amount
/Journal/JournalLine/JournalLineVolume     NULL
/Journal/JournalLine/JournalLineDescription     Payee Name
/Journal/JournalLine/JournalLineChequeBookReference     NULL
/Journal/JournalLine/JournalLineMatchField     Cheque Number
NB Contra accounting entries should be posted to:
Schema Element     Data
/Journal/JournalLine/JournalLineCostCentre     Bank account control Cost Centre
/Journal/JournalLine/JournalLineAccount     Bank account control Account Code
/Journal/JournalLine/JournalLineMoneyTotal     Transaction Line Amount * -1
/Journal/JournalLine/JournalLineDescription     Payee Name
/Journal/JournalLine/JournalLineMatchField     Cheque Number
/Journal/JournalPeriod     Current General Ledger Period
/Journal/JournalYear     Current General Ledger Year

It looks you are new to PI,
you have to develop scenario end to end, by creating source data type and target data type(if you have XSD's not required),then use Graphical mapping (message mapping) to map source and target structures.
Search in sdn for one end to end scenario you will understand easily
Regards,
Raj

How to change the Display Pattern for Decimal Fields dynamically

hi all,
Can any one help me how to change the display pattern for decimal fields dynamically???
Currently I am using z,zzz,zzz,zz9.999 Display pattern for Quantity Field. If the value is blank it is displaying as 0.000 on the Screen. But I don't want this to be printed.
Please help me how to solve this ASAP.
Thanks,
Prabhu

Hi,
Alternatively you can handle it in the context.
In the context area, click on the quantity. In the bottom, click on the conditions tab, and put a condition
<quan field> NE initial.
So the field will not be printed if there is no value.
Regards,
Vidya Chowdhary A.

How long should I let the extracting process run? It has been over 6 hours (Photoshop Elements.

How long should I let the extracting process run? It has been over 6 hours (Photoshop Elements). I have already received Disk Image Error - 4960. System will not let me attempt another download as message that download is in queue is received??

Cancel it, try this:
Direct Download Links for Adobe Software
Use Winzip to extract the 7z file.
Mylenium

How to restrict the modification of a process form field.

Hi,
Is there a way out to restrict the modification of a process form field.
I have a process form field loginid which can not be updated in a target. I want to achieve the same in OIM. I have not created any update task for the field but if the user changes the loginid field then it is getting saved in the OIM database and hence any operation thereafter is falling.
Thanks

Hi Kevin.
I really appreciate your help.
But I tested your configuration in our environment and it doesn't work. The same error (The Resource has not been configured properly) is displayed when I try a provisioning for that resource. Anyway, we could not use this configuration here, because end-users shall have the option to change some values in their process form.
I don't know why, but seems that when I define any field as Display-Only, the prepopulate adapter runs in a post-insert schedule and a error is given cause it try to fulfill a display-only field, which is not allowed.
I try an alternative configuration, which works properly:
- keep the field User ID as Text Field.
- use the prepopulate adapter to populate this field with the User Login (previously defined in the User Definition form)
- delete the property "required = true" to this field
- set property "visible = false" to this field
In this way, the end-users can modify the other fields, except User ID. Otherwise, they never will can see their own User IDs while making a request. For new users it will not be a problem because their User Login (on User Definition) and User ID (on Process Form) will be exactly the same, but for users that already exists in the target system, this values will be different which can originate small issues.
Until achieve an understanding about why a display-only field can not be filled by an pre-populate adapter, I will use this setting above.
Regards.

Data flow fails on packed decimal field moving iSeries DB2 data from one iSeries DB to another

I' trying to use SSIS to move table content from one iSeries DB2 database to another. I'm using the .Net providers for OleDb\IBM DB2 for i5/OS IBMDA400 OLE DB Provider in the connection managers for the source and destination and the test connection
works fine. When I try to run the data flow task however it fails on the first packed decimal field it encounters with the exceptions ...
[select from hydro520 hydroweb2 blpmstr [16]] Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "component "select from hydro520 hydroweb2 blpmstr" (16)" failed because error code 0x80004002 occurred, and the error
row disposition on "output column "MSPRIB" (55)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
[select from hydro520 hydroweb2 blpmstr [16]] Error: The component "select from hydro520 hydroweb2 blpmstr" (16) was unable to process the data. Pipeline component has returned HRESULT error code 0xC0209029 from a method call.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "select from hydro520 hydroweb2 blpmstr" (16) returned error code 0xC02090F5. The component returned a failure code when the pipeline
engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
...in the progress tab. Can someone kindly tell me what I need to do to get the connection manager to work with DB2 packed decimal fields? Or is it a different issue all together? Thanks tonnes for any help, Roscoe

Hi rpfinn,
From the Data Types mapping rules between SSIS and DB2, we can see that both the NUMERIC and DECIMAL data types in DB2 are mapped to DT_NUMBERIC data type in SSIS. Now that the source data in your DB2 database is NUMERIC data type, changing the DT_NUMBRIC
data type to DT_DECIMAL is invalid. Besides, if we check the data types of the target External column and Output column from the Advanced Editor for ADO NET Source adapter, the data type should be defined as DT_NUMERIC with Precision as 9 and Scale as 2. I
am not clear where you see the DT_NUMBERIC(9,0) e.g. DT_NUMERIC with Precision as 9 and Scale as 0, but it may be the cause of the issue. You need to make sure the DT_NUMERIC data type also has Scale 2 instead of 0.
If you don’t know how to modify the data type, please elaborate the Data Flow Task of the package so that we can make further analysis. Besides, the error messages you posted are incomplete, it will be helpful if you post the complete error message.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

How can I speed up the extract() function queries on XML

Hi,
Please I need some light on xml and indexes.
This is my case:
I use Oracle 9i R2.
I have a table with some rows containing some few xml documents (each row contains a big xml document).
Given a value for an attribute of a tag, I want to extract the entire section within the tags.
Example:
<MYTAG number="1">
.....big stuff here
</MYTAG>
<MYTAG number="2">
.....big stuff here
</MYTAG>
<MYTAG number="x">
.....big stuff here
</MYTAG>
So for number=2 I would like to extract from the document the xmltype
<MYTAG number="2">
.....big stuff here
</MYTAG>
I created an index and have followed all the steps from the XML Database Developers Kit manual. Then I would use extrac() as the document says.
Now some doubts arised:
Are these text/xml indexes only useful for getting the rowid of my document?
I mean, if I select 'x' from the table looking for some value, then the index is used. But when I use extract in the select to get the section I look for, the query gets really low, specially when xml documents are big. I think when I have only row with one document, getting the rowid is not the problem, but the extraction from the document is.
Is the extraction process faster because of the index?
For what I see, the index only helps me to find the rowid, but then Oracle has to deal with the very big document inside the row. At that point Its oracle against a big text processing and index has nothing to do.
How can I speed up the extraction of the section?
If there any other index or tool for help extraction to be faster?
I would appreciate to know what can I do. I need help on this.
Thanks in advance!

Well,
- What indexes, if any, already exist?
- What do the functions rl and nice do?
- What are the current query plans?
- How restrictive are the various predicates?
- What version of Oracle?
Justin

How to process pdf file in clower ETL

Hi,
I want process pdf document in clower ETL dataintegartor. I have created sample project and created ETL garph universal data reader, data i have imported pdf file, while openning the metta data information it's show encoding data format and invalid delimiter and while running error in the console
Please assist me how to process pdf file with unstructured data format.
I am getting below the error,
ERROR [WatchDog] - Graph execution finished with error
ERROR [WatchDog] - Node DATA_READER0 finished with status: ERROR caused by: Parsing error: Unexpected record delimiter, probably record has too few fields. in field # 1 of record # 2, value: '<Raw record data is not available, please turn on verbose mode.>'
ERROR [WatchDog] - Node DATA_READER0 error details:
org.jetel.exception.BadDataFormatException: Parsing error: Unexpected record delimiter, probably record has too few fields. in field # 1 of record # 2, value: '<Raw record data is not available, please turn on verbose mode.>'
     at org.jetel.data.parser.DataParser.parsingErrorFound(DataParser.java:527)
     at org.jetel.data.parser.DataParser.parseNext(DataParser.java:437)
     at org.jetel.data.parser.DataParser.getNext(DataParser.java:168)
     at org.jetel.util.MultiFileReader.getNext(MultiFileReader.java:415)
     at org.jetel.component.DataReader.execute(DataReader.java:261)
     at org.jetel.graph.Node.run(Node.java:425)
     at java.lang.Thread.run(Thread.java:619)
please can any one help me.
Thanks
Rajini C
Edited by: 954486 on Sep 19, 2012 11:19 PM

There is a separate forum for the BI/Information Discovery application of Endeca software: Endeca Information Discovery You should post your message there.
Thanks.
Sean

How can I use Automator to extract specific Data from a text file?

I have several hundred text files that contain a bunch of information. I only need six values from each file and ideally I need them as columns in an excel file.
How can I use Automator to extract specific Data from the text files and either create a new text file or excel file with the info? I have looked all over but can't find a solution. If anyone could please help I would be eternally grateful!!! If there is another, better solution than automator, please let me know!
Example of File Contents:
Link Time =
DD/MMM/YYYY
Random
Text
161 179
bytes of CODE    memory (+                68 range fill )
16 789
bytes of DATA    memory (+    59 absolute )
1 875
bytes of XDATA   memory (+ 1 855 absolute )
90 783
bytes of FARCODE memory
What I would like to have as a final file:
EXCEL COLUMN1
Column 2
Column3
Column4
Column5
Column6
MM/DD/YYYY
filename1
161179
16789
1875
90783
MM/DD/YYYY
filename2
xxxxxx
xxxxx
xxxx
xxxxx
MM/DD/YYYY
filename3
xxxxxx
xxxxx
xxxx
xxxxx
Is this possible? I can't imagine having to go through each and every file one by one. Please help!!!

Hello
You may try the following AppleScript script. It will ask you to choose a root folder where to start searching for *.map files and then create a CSV file named "out.csv" on desktop which you may import to Excel.
set f to (choose folder with prompt "Choose the root folder to start searching")'s POSIX path
if f ends with "/" then set f to f's text 1 thru -2
do shell script "/usr/bin/perl -CSDA -w <<'EOF' - " & f's quoted form & " > ~/Desktop/out.csv
use strict;
use open IN => ':crlf';
chdir $ARGV[0] or die qq($!);
local $/ = qq(\\0);
my @ff = map {chomp; $_} qx(find . -type f -iname '*.map' -print0);
local $/ = qq(\\n);
#     CSV spec
#     - record separator is CRLF
#     - field separator is comma
#     - every field is quoted
#     - text encoding is UTF-8
local $\\ = qq(\\015\\012);    # CRLF
local $, = qq(,);            # COMMA
# print column header row
my @dd = ('column 1', 'column 2', 'column 3', 'column 4', 'column 5', 'column 6');
print map { s/\"/\"\"/og; qq(\").$_.qq(\"); } @dd;
# print data row per each file
while (@ff) {
    my $f = shift @ff;    # file path
    if ( ! open(IN, '<', $f) ) {
        warn qq(Failed to open $f: $!);
        next;
    $f =~ s%^.*/%%og;    # file name
    @dd = ('', $f, '', '', '', '');
    while (<IN>) {
        chomp;
        $dd[0] = \"$2/$1/$3\" if m%Link Time\\s+=\\s+([0-9]{2})/([0-9]{2})/([0-9]{4})%o;
        ($dd[2] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of CODE\\s/o;
        ($dd[3] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of DATA\\s/o;
        ($dd[4] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of XDATA\\s/o;
        ($dd[5] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of FARCODE\\s/o;
        last unless grep { /^$/ } @dd;
    close IN;
    print map { s/\"/\"\"/og; qq(\").$_.qq(\"); } @dd;
EOF
Hope this may help,
H

How to populate the field Discount Percent (DIS) in the outbound S1ORDEXC?

Hello all,
I am working with the Spec2000 to send out the IDOC S1ORDEXC.
Does anyone know how to populate the field Discount Percent (DIS)?
This field length of Discount Percent is 2 characters, but our customer discount in the Princing Conditions (Sales Order) is longer than 2 characters (ex: 7.500-%)
Thank you

Hello Thuan
I guess you are working with IS- ADEC and SPEC 2000. I am not an expert on this but leave you some hints from OSS notes I came across.
It appears like Discount Percent - DIS and Procurement Discount Percent -PDP are complementary and mutually exclusive. If one exists, the other need not.
Looks like DIS is computed as (100-PDP)/100 and it is just a 2- integer data (as in 20 Percent). It is a kind of multiplier (Factor), example if PDP discount is 10 percent, then DIS (Factor) is 0.9 and so final (net) price after discount = Price*0.9.
" If the discount comes in the S1BOOKED inbound into SD in the field DIS, then the discount has to be sent back in the DIS field .. if it came in the PDP field then it has to be sent back in the PDP field. If there was no discount in the incoming IDoc, then the discount has to be filled in the PDP if there was a change in the discount".
KDATE in SPEC 2000 file maps to DIS and KPERC to PDP.
PDP has 4 characters and per OSS note 440380, the point is ignored meaning you can work with 1225 instead of 12.25.
So may be you can work with PDP?
OSS notes: Apply to older releases but may still be applicable conceptually speaking.
456153 - S1ORDEXC does not send out Discount
440380 - PDP has only 4 characters in the SPEC IDoc instead of 5
596042 - Discount percent DIS not considered e processing S1ORDEXC
698668 - Incorrect calculation of unit price for PO item by S1ORDEXC
Let me know you final findings.

Can I know the precision and scale of a decimal field using ACEDAO?

Using ACEDAO in VC++, I am trying to retrieve the field details of an Access database (.accdb file) table of which one field is of decimal type. I am able to get the details using the functions of
DAO::_FieldPtr field;
as follows:
fieldName = field->GetName().GetBSTR();
nType = field->GetType() // returns DAO::dbDecimal
lSize = field->GetSize(); // returns 16
lAttr = field->GetAttributes(); // returns 0x000002H
nOrdinal = field->GetOrdinalPosition(); // returns 11
bAutoIncrement = ((lAttr & DAO::dbAutoIncrField) > 0);
DAO::PropertiesPtr props;
DAO::PropertyPtr prop;
int k, nProp;
std::wstring propName, propNames;
props = field->GetProperties();
if(props)
nProp = props->GetCount(); // returns 33
for(k = 0; k < nProp; k++)
prop = field->GetProperties()->GetItem((short) k);
if(prop)
propName = prop->GetName().GetBSTR();
propNames += propName;
propNames += L"\n";
// After exiting the loop, propNames contain 33 properties as:
// Value
// Attributes
// CollatingOrder
// Type
// Name
// OrdinalPosition
// Size
// SourceField
// SourceTable
// ValidateOnSet
// DataUpdatable
// ForeignName
// DefaultValue
// ValidationRule
// ValidationText
// Required
// AllowZeroLength
// AppendOnly
// Expression
// FieldSize
// OriginalValue
// VisibleValue
// GUID
// ColumnWidth
// ColumnOrder
// ColumnHidden
// Description
// DecimalPlaces
// DisplayControl
// TextAlign
// AggregateType
// ResultType
// CurrencyLCID
//But does not have any property named "Scale" or "Precision"
I could not find any function for retrieving the value for precision and scale for the decimal field.
Though I am able to retrieve the field value as a decimal number and get the required information from the structure, I think it is not the right way. Because, what will happen if the data for field is not available in the table?
Is there any other method to retrieve the precision and scale of a decimal type field using ACEDAO?
Thanks.

I cannot find a method or property in ACEDAO to retrieve the precision and scale of a field. Maybe you could try get the number of a decimal type and use some mathematical methods to get the precision.
I find there are some way to get the precision by ADO or OLEDB.
For ADO way, you could check this thread:
https://social.msdn.microsoft.com/Forums/office/en-US/883087ba-2c25-4571-bd3c-706061466a11/how-can-i-programmatically-access-scale-property-of-a-decimal-data-type-field?forum=accessdev
For OLE DB , you could use IColumnsInfo::GetColumnInfo to get DBCOLUMNINFO::bPrecision.
https://msdn.microsoft.com/en-us/library/windows/desktop/ms722704(v=vs.85).aspx
Also people in C++ may not familiar with access development, the
Access for Developers forum is good place for access develop issue. You could try there.
Hope this helps some.
Shu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to process an output message after pick and pack in LM46?

Hi,
I've implemented the User Exit to print the HU using LM18, it's working great but no output message is processed (and indeed, the sticker is printed on my own printer instead of the one defined in my Z custom output message).
I used LM46 to pick and pack the HU, am i missing a step?
In other words, how to process my custom output message after the pick and pack?
Is there some code I must add in the LM18 User Exit?

You know, in a user exit or a BADi you can access any variable of the program you want.
Just find what which program calls the Exit User, put a break-point in it, and find the variable you need to access.
Then add this kind code in your Exit :
DATA: l_var TYPE ....
FIELD-SYMBOLS: <fs_var> TYPE ANY.
ASSIGN ('(PGMNAME)variable') TO <fs_var>.
IF sy-subrc = 0.
l_var = <fs_var>.
ENDIF.
Same thing for a table :
DATA: lt_var TYPE TABLE OF....
FIELD-SYMBOLS: <fs_var> TYPE ANY.
ASSIGN ('(PGMNAME)table[]') TO <fs_var>.
IF sy-subrc = 0.
lt_var[] = <fs_var>.
LOOP AT lt_var ASSIGNING ...
ENDLOOP.
ENDIF.

BI 7.0: How to bring DataSource fields to InfoSource in design

We've replicated the generic datasource from R3 to BW and we have created an InfoSource with blank fields. We remember on BW 3.x version that we could bring Datasource fields to InfoSource by clicking somewhere, but on BI 7.0, we are trying to do the same thing, but can't find some function to do this. Then we try to right click the InfoSource and then select 'Create Transformation', and then to select the source system and the datasource, but of course we would get the error msg like "There are no fields in target TRCS InfoSource_Technical_Name". Any idea on how to bring Datasource fields into the blank InfoSource on BI 7.0?
Thanks!

Hi,
Instead of bringing the DS fields into a blank infosource, ideally, what you can do
is, you can create a new infosource based on your generic data source, which would make your process easy..
cheers,
Pattan.

How to process Line Selection on ALV Table in ABAP WebDynpro

Hi there,
I have a view with an ALV table whose context node retrieves its data from a Service Call for a method.
The method provides certain data of a database table which the ALV displays.
Now I would like to be able to select one row of that ALV table and after pressing a button or doubleclicking on the row or whatever a different view (as for me it is also ok on the same view) should appear to display the details of that selection.
I only need to know how to retrieve the selected data.
Or its index within the internal table.
I am already looking for hours for a useful thread and actually there is one which obviously is about a similar issue apart from the multiple selection part:
How to process multiple row selection in ALV table in Wendynpro ABAP? Help!
but i am afraid that i don't understand it. Or at least I misunderstand it since it does not work with me.
The system example mentioned in the thread does not help me either because it somehow does not correspond to my needs, does it?
It would be GREAT if somebody could help me with that. Please keep it simple for I am not an expert in webdynpro yet (obviously ^^) and also please explain in detail what I have to do with the context nodes since I am not sure whether the selection is stored in my already existing node or whether I need a special one for that.
Thanks!!
christina

Hi Christina,
If you just want to get one column data of the line that user clicked, use the Web Dynpro Code Wizard to Read Context of attibute you needed, then you will get code as follow:
* Define data for read attribute
    node_alv TYPE REF TO if_wd_context_node,
    elem_alv TYPE REF TO if_wd_context_element,
    stru_alv TYPE if_view_display=>element_alv ,
    item_column_name LIKE stru_alv-column_name.
* navigate from <CONTEXT> to <ALV> via lead selection
node_alv = wd_context->get_child_node( name = if_view_display=>wdctx_alv ).
* get element via lead selection
elem_alv = node_alv->get_element( ).
* get single attribute
elem_alv->get_attribute(
    EXPORTING
      name = `COLUMN_NAME'
    IMPORTING
      value = item_column_name ).
The value of column_name is stored in item_column_name.
If you need the index that the user clicked, try this:
* Definition of field symbol for index
FIELD-SYMBOLS : <fs_index> TYPE data.
* Get the selected index
ASSIGN r_param->index->* TO <fs_index>.
The index of clicked line is stored in field symbol <fs_index>.
Hope it will help.
Best Regards,
Stephanie

How to process decimal field in extract

Similar Messages

Maybe you are looking for