How to put a title row in the recorded 2D array excel file?

I am getting 2D array from labview. This file is saved to Excel File. However, I am trying to put a title row such as A, B, C, D (A is for 1st column, B is for 2nd column, C is for 3rd column and D is for 4th column) My recorded 2D data should start form the 2nd row. This data has also 4 columns which need to be aligned with the title row. Do you have any idea how I can perform this operation?

You still need to add tabs and an EOL.
'Convert EOL' does not insert an EOL.
See screenshot for a couple of basic ways.
=====================================================
Fading out. " ... J. Arthur Rank on gong."
Attachments:
Header_shot.gif ‏4 KB

Similar Messages

How to add A single row at the middle of the table in a Webi report

Hi,
I created a Webi report using Universe(Created universe using bex query).Now i have a requirement to display a row at the middle of a report. Can you please tell me ,how to add a sigle row at the middle of a Webi report.
Thanks in advance
Regards
Monika

Hi Monika,
It is not really possible to add a row (I assume you mean of unrelated data) to the middle of a table in a report. You can add a new table with a single row between two tables. For instance you could add a new one row table, or even single cells which are positioned relatively between two tables. Possibly a block on top of another. But this gets tricky.
Can you explain in more detail what you are trying to do?
Thanks

How to insert a new row in the middle of an set of rows

Hi
How to insert a new row in the middle of an set of rows ? and How to Reset the line id after the new row added ?
Regards,
Sudhir B.

Hai,
just try this,
Instead of using omatrix.Addrow(1,-1) use like
omatrix.AddRow( RowCount , Position)
RowCount
The number of rows to add (default is 1)
Position
The position of the new rows (0-based; default is -1, meaning append row to the end)
After adding rows in matrix For, sno.
for i=1 to omatrix.visualrowcount
otext=omatrix.getcellspecific("columnid",i) '--where columnid is the unique id of the sno column
otext.value=i
next i
Hope this helps you.
Thanks & Regards,
Parvatha Solai.N

How to put ipod 3rd generation on the disk mode manually?

how to put ipod 3rd generation on the disk mode manually?

I am having this problem as well. I've tried dozens of times at this point. I can produce the apple icon but when I release and press play+select it just reverts back to the red x. The red x is the whole reason I'm trying to get this into disk mode. I need to reset it but I can't until it is in disk mode. I've tried the flat surface, one finger etc etc but disk mode still eludes me. Any other thoughts?

How to edit a particular row in the table ctrl when a push button is clickd

Hi Experts,
How to edit a particular row (except the Primary keys) after selecting it in the TABLE CONTROL when a
push button is clicked in the table control.
For Eg. If you have a push button say "Modify", the particular row what we select in the table control should be in a
editable mode after clicking "Modify" Push button.
Please help me out.
Thanks in advance.

Hey Ram,
Thanks a ton.
Its working fine...sorry for the late reply.
The reason behind the delay is because i had modified my code as per your logic it worked fine but the thing is that the whole column was in editable mode but not a single row.
For E.g If i want to edit a particular row, first i select the row and then click on "Modify" button. After i click on the button, the whole column gets in a editable mode including the one which i intentionally selected.
Here, the solution is that you have to set a flag in PBO so that once it is done with PBO then it need not come back again after we click on "Modify" button.
And one more query is that after you modify a particular row in the table control ( When it is in editable mode) and click on the "Save" button, it is not getting updated to database.
To update the database, we need to select the row once again after modifying it and click on the "Save" button.
Here, database is updating only when it is selected again. If it is not selected, it is not getting updated.
If you have any alternative solution, then please help me out.( I hope i am clear with the question.)
Thanks,
Ananth.

How to generate blank spaces at end of the record in a flat file with fixed

Hi,
I am generating a flat file with fixed length.
In my ABAP program, i am able to see the spaces at the end of the recors in debug but when download to applicaiton server i am not able to see those spaces.
How can i generate blank spaces at the end of the record in a flat file?
Please update
Thank you

How are you downloading the file? And, How are you looking at the file on the application server?
Can you provide snippets of your code?
Cheers
John

How to read the content of this excel file in LV

Hi could you please let me know how can I read the content of this excel file using the Read From Speardsheet function. It contains text and numbers
Thanks
The excel file is attached
Attachments:
Datalogging.zip ‏307 KB

Check attached VI.
I am not allergic to Kudos, in fact I love Kudos.
Make your LabVIEW experience more CONVENIENT.
Attachments:
ReadFromExcel.vi ‏27 KB

Pdf on Windows 8;How do I get adobe to be the default app for pdf files.

I installed pdf reader on my windows 8 laptop, but windows only opens with its "TWINUI". In its "other" option acrobat reader doesn't appear. It also doesn't appear on the windows desktop.
How do I get adobe to be the default app for pdf files.

http://winsupersite.com/article/windows8/windows-8-tip-change-file-associations-144102

By which method,i can get the no of rows in the record set?

Does anyone help me that by which method,i can get the no of rows in the record set?
now i use next() to check whether the next record is available or not?

shashi_rajak wrote:
under Practice Exercise #1 heading :
there is a statement.
"Now, the COUNT function does not need to retrieve all of the fields from the table (ie: employee_number, employee_name, and salary), but rather whenever the condition is met, it will retrieve the numeric value of 1. Thus, increasing the performance of the SQL statement."And have you ever tried it? Or do you simply blindly believe everything you read? And what sort of "authority" is "tech on the net"?
P.S. A quick test on Oracle (and you must do each query at least twice throwing away the first result, as Oracle always caches things which will have an effect, and averaging the remaining attempts).
count(*) -- 1 min 17 secs for 35,311,978 rows
count(1) -- 1 min 19 secs for 35,311,978 rows
Edit: And the table has 46 columns.

How to set the size of an Excel-file,Java created in tabbed forma

Hi all,
I'm creating an Excel-file by writing data to an outputStream in tabbed format.
My problem is : How can I set the width of the columns of that Excel-file, not the default-size?
If anyone can help, that would be very nice.
Thanks a lot,
Regards,
Tim

You can write a generic xls file containing a Macro to open and set the column widths of text or csv files. Your java program can then call this generic file to open your text files.

How to upload the invocie verify from excel file?

How to upload the invocie verify from excel file?
there is more items requied to input.
refer to MIR7
thanks

How to upload the invocie verify from excel file?
there is more items requied to input.
refer to MIR7
thanks

How to find out each Cell having Data or Not in Excel File by Using WDJ

Hi Friends,
I have one doubt on WDJ.
I have to Upload Excel File. Click on Upload Button in Excel file Data will move to One Bapi. This is I was done. But my Requirement is if any empty Cell in Excel That File not uploaded it display one error message Please upload Correct Excel File
How to find out each Cell having Data or Not in Excel File by Using WDJ. Please tell me.
By Using this Code I have Upload Excel File
InputStream text = null;
     int temp = 0;
     //wdComponentAPI.getMessageManager().reportSuccess("filePath Vijay:::");
     try
               File file = new File(wdContext.currentContextElement().getResource().getResourceName().toString());
FileOutputStream op = new FileOutputStream(file);
               if (wdContext.currentContextElement().getResource()!= null)
                      text = wdContext.currentContextElement().getResource().read(false);
                         while((temp=text.read())!= -1)
                              op.write(temp);
                              op.flush();
                              op.close();
                              path = file.getAbsolutePath();
                              //wdComponentAPI.getMessageManager().reportSuccess("Path Name :::::"+path);
     catch(Exception ex)
               ex.printStackTrace();
But my Requirement is If excel having any Empty Cell that excel file not uploaded.How to do this...
Regards
Vijay Kalluri

Hi my friend
I would like to share you some APACHE APi´s that i use when i have to read excel files in Web Dynpro.
JAR = poi-3.2-FINAL-20081019.jar
Some Example:
POIFSFileSystem fs;
HSSFWorkbook wb;
HSSFSheet sheet;
String myMexican_ValueFromExcelis = "";
try {
         fs = new POIFSFileSystem(new FileInputStream();
         // and select the cell "y"
        cell = row.getCell( 0 );
        myMexican_ValueFromExcelis = cell.getCellValue();
}cach(Exception e){
REgargds

2011 Office email merge issue - the email is not sent to the email address in excel file

When doing an email merge on my Mac with Office 2011 and Lion (10.7.3), the email is not sent to the email address in excel file. EX. the excel file email address is "[email protected]", but the merge is sending it to "[email protected]" - how do you specify with column in the excel file is the proper email?

HI Arkesh Sharma ,
you need to check below steps:
1. you need to check the mail server url is corrcet/not in smtp by using t.c scot
2. need to check r u provide correct user detils/not by using t.c su01.
and please go through below link :
PI alerts are not working
The specified item was not found.
thanks,

Reg: Downloading the internal table into excel file.

Hi,
My requirement is i am collecting data in the internal table and i have to download the contents in an excel file and i have declared like this.
PARAMETERS : x_test    TYPE string
                      DEFAULT 'C:\temp\file.txt'.
I have given the default file path like this and i am using the function module .
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
BIN_FILESIZE                    =
      FILENAME                      = OUTPUT_PATH
      FILETYPE                      = 'DAT'
IMPORTING
FILELENGTH                      =
    TABLES
      DATA_TAB                        = INT_INPUT
FIELDNAMES                      =
   EXCEPTIONS
     FILE_WRITE_ERROR                = 1
     NO_BATCH                        = 2
     GUI_REFUSE_FILETRANSFER         = 3
     INVALID_TYPE                    = 4
     NO_AUTHORITY                    = 5
     UNKNOWN_ERROR                   = 6
     HEADER_NOT_ALLOWED              = 7
     SEPARATOR_NOT_ALLOWED           = 8
     FILESIZE_NOT_ALLOWED            = 9
     HEADER_TOO_LONG                 = 10
     DP_ERROR_CREATE                 = 11
     DP_ERROR_SEND                   = 12
     DP_ERROR_WRITE                  = 13
     UNKNOWN_DP_ERROR                = 14
     ACCESS_DENIED                   = 15
     DP_OUT_OF_MEMORY                = 16
     DISK_FULL                       = 17
     DP_TIMEOUT                      = 18
     FILE_NOT_FOUND                  = 19
     DATAPROVIDER_EXCEPTION          = 20
     CONTROL_FLUSH_ERROR             = 21
     OTHERS                          = 22.
My requirement is i dont want to change my extension as .txt from .exl to my parameter addition and in the function module the file type should be 'dat' only and in the runtime i want to change the file name which i have given in the .
PARAMETERS : x_test    TYPE string
                      DEFAULT 'C:\temp\file.txt' this file.txt into datas.xls.
it would be grateful if some one share some valuable views to wards this query
Thanks and Regards,
Keny

Hi,
Use this code.
It will ask for the file name...there u can change.
data : l_filename type string,
         l_filetype type char10,
         l_path type string,
         l_fullpath type string.
l_filetype = 'DAT'.
*Get the file name
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_SAVE_DIALOG
    EXPORTING
      FILE_FILTER          = '*.DAT'
      INITIAL_DIRECTORY    = 'C:\'
    CHANGING
      FILENAME             = l_filename
      PATH                 = l_path
      FULLPATH             = l_fullpath
    EXCEPTIONS
      CNTL_ERROR           = 1
      ERROR_NO_GUI         = 2
      NOT_SUPPORTED_BY_GUI = 3
      others               = 4.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
check l_fullpath is not initial.
*Download file
CALL METHOD CL_GUI_FRONTEND_SERVICES=>GUI_DOWNLOAD
    EXPORTING
      FILENAME                = l_fullpath
      FILETYPE                = l_filetype
    CHANGING
      DATA_TAB                = t_data_sum[]
    EXCEPTIONS
      FILE_WRITE_ERROR        = 1
      NO_BATCH                = 2
      GUI_REFUSE_FILETRANSFER = 3
      INVALID_TYPE            = 4
      NO_AUTHORITY            = 5
      UNKNOWN_ERROR           = 6
      HEADER_NOT_ALLOWED      = 7
      SEPARATOR_NOT_ALLOWED   = 8
      FILESIZE_NOT_ALLOWED    = 9
      HEADER_TOO_LONG         = 10
      DP_ERROR_CREATE         = 11
      DP_ERROR_SEND           = 12
      DP_ERROR_WRITE          = 13
      UNKNOWN_DP_ERROR        = 14
      ACCESS_DENIED           = 15
      DP_OUT_OF_MEMORY        = 16
      DISK_FULL               = 17
      DP_TIMEOUT              = 18
      FILE_NOT_FOUND          = 19
      DATAPROVIDER_EXCEPTION = 20
      CONTROL_FLUSH_ERROR     = 21
      NOT_SUPPORTED_BY_GUI    = 22
      ERROR_NO_GUI            = 23
      others                  = 24.
IF sy-subrc NE 0.
    MESSAGE e398(00) WITH sy-subrc ' Error downloading file' '' ''.
ENDIF.
Regards
Sandeep REddy

How to add entire new row at the top of table in pdf report from c# windows forms using iTextSharp

Hi for past 3 days i was thinking and breaking my head on how to add entire new at top table created in pdf report from c# windows forms with iTextSharp.
First: I was able to create/export sql server data in form of table in pdf report from c# windows forms. Given below is the code in c#.
using System;
using System.Collections.Generic;
using System.Configuration;
using System.Text;
using System.Data;
using System.IO;
using System.Data.SqlClient;
using System.Windows.Forms;
using iTextSharp.text;
using iTextSharp.text.pdf;
namespace DRRS_CSharp
public partial class frmPDFTechnician : Form
public frmPDFTechnician()
InitializeComponent();
private void btnExport_Click(object sender, EventArgs e)
Document doc = new Document(PageSize.A4.Rotate());
var writer= PdfWriter.GetInstance(doc, new FileStream("Technician22.pdf", FileMode.Create));
doc.SetMargins(50, 50, 50, 50);
doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
doc.Open();
PdfPTable table = new PdfPTable(7);
table.TotalWidth=585f;
table.LockedWidth = true;
PdfPTable inner = new PdfPTable(1);
inner.WidthPercentage = 115;
PdfPCell celt=new PdfPCell(new Phrase(new Paragraph("Institute/Hospital:AIIMS,NEW DELHI",FontFactory.GetFont("Arial",14,iTextSharp.text.Font.BOLD,BaseColor.BLACK))));
inner.AddCell(celt);
Paragraph para = new Paragraph("DCS Clinical Report-Technician wise", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK));
para.Alignment = iTextSharp.text.Element.TITLE;
iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
png.ScaleToFit(95f, 95f);
png.Alignment = Element.ALIGN_RIGHT;
SqlConnection conn=new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
SqlCommand cmd = new SqlCommand("Select t.technician_id,td.Technician_first_name,td.Technician_middle_name,td.Technician_last_name,t.technician_dob,t.technician_sex,td.technician_type from Techniciandetail td,Technician t where td.technician_id=t.technician_id and td.status=1", conn);
conn.Open();
SqlDataReader dr;
dr = cmd.ExecuteReader();
table.AddCell("ID");
table.AddCell("First Name");
table.AddCell("Middle Name");
table.AddCell("Last Name");
table.AddCell("DOB" );
table.AddCell("Gender");
table.AddCell("Designation");
while (dr.Read())
table.AddCell(dr[0].ToString());
table.AddCell(dr[1].ToString());
table.AddCell(dr[2].ToString());
table.AddCell(dr[3].ToString());
table.AddCell(dr[4].ToString());
table.AddCell(dr[5].ToString());
table.AddCell(dr[6].ToString());
dr.Close();
table.SpacingBefore = 15f;
doc.Add(para);
doc.Add(png);
doc.Add(inner);
doc.Add(table);
doc.Close();
The code executes well with no problem and get all datas from tables into table in PDF report from c# windows forms.
But here is my problem how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
As the problem i am facing is my title or Header(DCS Clinical Report-Technician wise) is at top of my image named:logo5.png and not coming to it's center position of my image.
Second the problem i am facing is how to add new entire row to top of existing table in pdf report from c# windows form using iTextSharp?.
given in below is the row and it's data . So how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
as you can see how i create my columns in table in pdf report and populate it with sql server data. Given the code below:
Document doc = new Document(PageSize.A4.Rotate());
var writer= PdfWriter.GetInstance(doc, new FileStream("Technician22.pdf", FileMode.Create));
doc.SetMargins(50, 50, 50, 50);
doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
doc.Open();
PdfPTable table = new PdfPTable(7);
table.TotalWidth=585f;
table.LockedWidth = true;
Paragraph para = new Paragraph("DCS Clinical Report-Technician wise", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK));
para.Alignment = iTextSharp.text.Element.TITLE;
iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
png.ScaleToFit(95f, 95f);
png.Alignment = Element.ALIGN_RIGHT;
SqlConnection conn=new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
SqlCommand cmd = new SqlCommand("Select t.technician_id,td.Technician_first_name,td.Technician_middle_name,td.Technician_last_name,t.technician_dob,t.technician_sex,td.technician_type from Techniciandetail td,Technician t where td.technician_id=t.technician_id and td.status=1", conn);
conn.Open();
SqlDataReader dr;
dr = cmd.ExecuteReader();
table.AddCell("ID");
table.AddCell("First Name");
table.AddCell("Middle Name");
table.AddCell("Last Name");
table.AddCell("DOB" );
table.AddCell("Gender");
table.AddCell("Designation");
while (dr.Read())
table.AddCell(dr[0].ToString());
table.AddCell(dr[1].ToString());
table.AddCell(dr[2].ToString());
table.AddCell(dr[3].ToString());
table.AddCell(dr[4].ToString());
table.AddCell(dr[5].ToString());
table.AddCell(dr[6].ToString());
dr.Close();
table.SpacingBefore = 15f;
doc.Add(para);
doc.Add(png);
doc.Add(table);
doc.Close();
So my question is how to make my column headers in bold?
So these are my questions.
1. how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
2. how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
3.how to make my column headers in bold?
I know that i have to do some modifications to my code but i dont know how to do it. Can anyone help me please.
Any help or guidance in solving this problem would be greatly appreciated.
vishal

Hi,
>>1. how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
2. how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
3.how to make my column headers in bold?<<
I’m sorry for the issue that you are hitting now.
This itextsharp is third party control, for this issue, I recommended to consult the control provider directly, I think they can give more precise troubleshooting.
http://sourceforge.net/projects/itextsharp/
Thanks for your understanding.
Regards,
Marvin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to put a title row in the recorded 2D array excel file?

Similar Messages

Maybe you are looking for