How to put a web link in the detailed navigation

How can you put a web link in the detailed navigation?
I know that if your role contains iviews that are 3 levels down (default), then the link to the iview will appear in the detailed navigation. But, I want to put a link to a external site in the detailed navigation - is this possible?
Thanks
Patrick

I have a page set with a url iview and it opens from the detailed navigation in a  new window fine.
however when clicking on a link to the page via a landing page which displays the KM content page folders, it loads it in the portal active window still (with nav and masthead).
Any ideas how to get the km link to open in a new browser window?
thanks
Message was edited by:
        Alex McKnight

Similar Messages

  • How to add links in the detailed navigation area of the navigation panel

    hi everyone,
    I had developed 4 iviews. 2 of those iviews i added to 2 different pages. And the 2 pages added to workse and assigned a role. i assigned this role to user. and it is working fine.
    i want to add remaining to iviews as links.
    how to add the links in the detailed navigation area of the navigation panel.
    regards
    sunil kumar.ch

    Hi sunil,
       Create a JSPDynPage component(C) having 2 hbj:link whose hrefs point to these 2 iViews(A and B). U can get the href of the iView by previewing it(for A and B). Create an iview from the par component (C) and add it to the DLN so that it shows the links to ur iViews(A and B). U can make the Show Tray property of this iView (C) to false.
    Regards,
    Harini S

  • Different links in the detailed navigation, based on URL alias

    <u>What I'm trying to do :</u>
    Based on URL aliases /irj/portal/individual or /irj/portal/business
    I will dynamically add an UME group to the already logged in user.
    <u>Filter :</u>
    If clicking on /irj/portal/individual I will store "group=individual" in the context, and add UME group individual, if clicking /irj/portal/business I will store "group=business" in the context, and add UME group business and remove individual, and then redirect to the same URL.
    <u>Configuration</u>
    Each UME group has a one-to-one mapping to a Portal role.
    I will place an ACL on the PCD content, based on group, hiding/showing aggregated folders, hanging under the roles.
    <u>Wanted end-result</u>
    Different links in the detailed navigation, based on URL alias.
    <b>My question is how you would implement the filter part, mentioned above ?</b>
    Portal app or J2EE servlet filter or something else ?

    Hi sunil,
       Create a JSPDynPage component(C) having 2 hbj:link whose hrefs point to these 2 iViews(A and B). U can get the href of the iView by previewing it(for A and B). Create an iview from the par component (C) and add it to the DLN so that it shows the links to ur iViews(A and B). U can make the Show Tray property of this iView (C) to false.
    Regards,
    Harini S

  • How can I add an iView to the Detailed Navigation itself

    How can I add an iView to the Detailed Navigation itself and hides the other hyperlinks?

    To add an iview on the Detailed navigation side of a page:
    1.Double click the page which brings up the page editor.
    2.Click the Display dropdown box and choose Dynamic Navigation.
    3.Add an ivew to it.Save and add the page to a role to see the results.
    if this is not u wanted, post back here.
    Regards.

  • Access the detailed navigation link using webdynpro

    Hi,
    I have a requirement where we have two different DC's of which one is a standard DC and the other one is custom DC with one application in each of them.My requirement is to navigate to the other application in the second DC directly on clik of a link or button from the current application.Also since these applications are displayed in detailed navigation i want to access the detailed navigation link location and activate the other Application instead of using WDPortalNaviagtion.
    The steps are:
    Development Component - DC1 - This is custom DC
    with application APP1
    Development Component -DC2 - This is standard
    with application APP2
    I have APP1 & APP2 in the detailed navigation.
    If i have a link or button in APP1 to navigate to APP2 i have to be able to activate the link on the detailed Navigation of APP2 to open up its content.

    Hi Swathi,
    Check the following threads:--
    Replace an iView dynamically by another one by portal navigating service
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1aa4d188-0e01-0010-2382-c5c65202c433
    http://help.sap.com/saphelp_nw04/helpdata/en/43/d1233b4c1d0a85e10000000a1553f6/frameset.htm
    Hope This Will Help
    Regards,
    Siddharth

  • How can I put a music link in the page like this?

    How can I put a music link in the page like this?
    http://members.aol.com/trumanj/midi/tjsragtime.htm
    Thanks

    Hola JB
    No, I haven't...I'm trying to learn flash and it's been keeping me very busy...maybe it's the age..
    Len, I been trying to do it that way, but, as I just mention, Flash don't like me :)
    Thanks, I will do that for sure.
    Daniel Ulysses

  • How do I add a link to the list of links under the "My Account Link"

    Q) How do I add a link to the list of links under the "My Account Link"?
    A) Edit any of your portlet web services and go to the "Advanced URL Settings" and then "User Configuration URL". If you type a path in this box, a link displays on the My Account page.
    You need to restart your portal web server to see results immediately because the display page is cached.

    What To Do If Your iDevice or Computer Is Lost Or Stolen
    If your Mac, iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should do in advance - before you lose it or it's stolen - and some things to do after the fact. Here are some suggestions:
    Reporting a lost or stolen Apple product
    AT&T, Sprint, and Verizon can block stolen phones/tablets
    What-To-Do-When-Iphone-Is-Stolen
    Lost or Stolen iPhone? Here’s What to do.
    6 Ways to Track and Recover Your Lost/Stolen iPhone
    Find My iPhone
    It pays to be proactive by following the advice on using Find My Phone before you lose your device:
    Find My iPhone
    Setup your iDevice on MobileMe
    OS X Lion- About Find My Mac
    How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
    Third-party solutions for computers:
    VUWER 1.5.4
    Sneaky ******* 0.2.0
    Undercover 4.7
    LoJack for Laptops Premium Mac
    STEM 2.1
    MacPhoneHome 3.5

  • How can i Store web links in my iPad for easy access?

    How can i store web links in iPad for easy access?

    Add them as a bookmark in the Safari web browser. You can sync bookmarks between your computer and iPad too using iTunes or iCloud.

  • Update the web links on the Crystal Reports start page?

    Many of the web links on the Crystal Reports start page are now useless and direct to the general "Welcome to the SAP Support World!" page.
    When will / how can these be updated?

    You should be able to do searches here:
    https://www.sdn.sap.com/irj/sdn/businessobjects-articles
    https://www.sdn.sap.com/irj/sdn/businessobjects-downloads
    Ludek

  • How do I add web part in the event receiver after the site is provisioned in SP 2010?

    How do I add web part in the event receiver after the site is provisioned in SP 2010?

    You try the below steps:
    1. Use long operation to provision the site, so that it does not time out in process.
    2. After provisioning, you can add a page or add the web part directly to landing page of site.
    For each of the above steps you can find the sample code pieces.
    if you couldn't get that, let me know. I will share with you.
    Thanks, Ashish If my response has helped you, please mark as answer.

  • How to put ipod 3rd generation on the disk mode manually?

    how to put ipod 3rd generation on the disk mode manually?

    I am having this problem as well. I've tried dozens of times at this point. I can produce the apple icon but when I release and press play+select it just reverts back to the red x. The red x is the whole reason I'm trying to get this into disk mode. I need to reset it but I can't until it is in disk mode. I've tried the flat surface, one finger etc etc but disk mode still eludes me. Any other thoughts?

  • How to fetch only WebI reports from the repository

    How to fetch only WebI reports from the repository, where in we have Deski reports also in the repository.. any macro??

    here is the query to fetch only webi reports:
    Open Administration Launchpad (.Net / Java) from:
    Start >> All Programs >> BusinessObjects XI Release 2 >> BusinessObjects Enterprise >
    Click on the 'Query Builder' under 'Administration Tools' on the left pane.
    Logon to Query Builder using Enterprise Administrator credentials.
    Run the following query for Web Intelligence Reports:
    SELECT SI_ID, SI_NAME, SI_OWNER FROM CI_INFOOBJECTS WHERE SI_KIND='WEBI'
    Thanks,
    Srikanth.

  • How to create a generalized version of the detailed polygons?

    How to create a generalized version of the detailed polygons?
    I have a table of detailed polygons (100+ vertices) and I want to get generalized version of these polygons.
    For example, assume I have a polygon with 100 vertices. Distance between vertex n and n+1 is 1.0.
    I want to get geometry (generalized polygon, line or point) where distance between vertex n and n+1 is 10.0 or more (I want vertices to be considered as one vertex if distance between them is less then 10.0).
    Is it possible to create generalized version of polygons on the fly?
    Any help is appreciated.
    Thanks.

    Scenario A:
    If all of your polygons have no interaction among them (No polygon shares any boundary with any other ones).
    In this case you can use the sdo_util.simplify in 10g to reduce the vertices in your polygons which returns new polygon geometries on the fly.
    If you found that simplify is not doing exactly what you want, you can always roll out your own implementation using PL/SQL or the new SDOAPI JGeoemtry class in Java. Both will give you complete access to the coordinate arrays in a polygon and update them back to the database after you have simplified them in your code.
    Scenario B:
    If your polygons share boundaries, then the above methods will not work since the simplification process may not preserve the topology among your polygons. What you can do then is to use the Java topo package to create a new topology by adding all of your polygons to to an empty topology (which you first create in the database and then load into memory using oracle.spatial.topo.TopoMap). Once you have a topology built in the memory, you can use methods such as oracle.spatial.topo.TopoMap.changeEdgeCoords() to simplify the edges of your polygons. You can then recreate the simplified polygons from the topology. This is just a rough guide; for more details you need to check out the java doc for the various packages mentioned above which are shipped with 10g spatial.

  • Changing the Detailed Navigation link

    Dear All,
    I need to change the Detailed Navigation link so that it is right aligned and the arrow image is followed after the link.
    Ex.    Sales Reports =>
    when it is opened then the following should be the view
              Sales Reports *
                       Report1  o
                       Report1  o
    Do let me know if this can be achieved by any theme settings; if not then what should be the approach for the same.
    Regards,
    Samir

    Hi Samir,
    This is not possible by just theme settings, For this you need to modify the Detailed Navigation Par file.
    Download the the Detailed Navigation par file open the jsp page and saw the columns .
    Regards,
    Piyush

  • How can you set the default width of the 'Detailed Navigation iView'?

    Hello,
    we would like to reduce the default width of the 'Detailed Navigation iView' in order to save some screen space.
    So far, we havn't found the right item in the portal admin to do this.
    Any help would be much appreciated! Thanks in advance.
    Frank Schülke, E.ON Ruhrgas, Germany

    Hi Frank,
    You can change the width of this navigation iview  by changing the value of "defaultExpWidth" in the file WAandNAVPanel.js present in the par file com.sap.layouts.framework.par from default value 220 pixels to the value you want.
    upload the changed par file and restart the server.
    Hope this helps,
    (if not do get  back )
    Regards,
    Uma.
    Do award points for helpful answers in SDN!!!!!!!:-)

Maybe you are looking for