How to read chinese text in Quickoffice

I wish to know if there is any plugin that allows me to read chinese text (preferably in UTF-8 or UTF-16 encoding) in Quickoffice.
There also don't seemed to be a free ebook reader that supports both english and chinese encoding.
Anyway knows anything at all, please help. Thanks

Use Read_text function module.
you need to pass
ID
LANGUAGE
NAME
OBJECT to the function moduel
To find the Text id name language and object these are the following steps. Example: FB02
1. goto FB02, Enter Document number
2. from menuselect Goto>Header-->header Text..... New window will be displayed
3. select the Header Text. here you can see all the text.
4. click on the TEXT (which you want to know the Text id) , then press log ICON (you can find in bottom right of the text window) it looks like a rolled paper.
5. in the Next window you will find Text Name. Text ID, Language. etc...
Regards,
Lalit Mohan Gupta.

Similar Messages

How to read long text in Document line item

Hi,
How to read long text in FI Document line item.

Use Read_text function module.
you need to pass
ID
LANGUAGE
NAME
OBJECT to the function moduel
To find the Text id name language and object these are the following steps. Example: FB02
1. goto FB02, Enter Document number
2. from menuselect Goto>Header-->header Text..... New window will be displayed
3. select the Header Text. here you can see all the text.
4. click on the TEXT (which you want to know the Text id) , then press log ICON (you can find in bottom right of the text window) it looks like a rolled paper.
5. in the Next window you will find Text Name. Text ID, Language. etc...
Regards,
Lalit Mohan Gupta.

How to read several text files at a time

Dear all
Read and write one text file is not a problem, but what confusies me is how to read several text files at one time, in the meanwhile,
is it possible to display the name of the text file?
For example, assuming I want to load file" cha 1, cha 2 , cha 3, " at one time and show their names, how to hadle with it
I have reviewed some files and it is not helpful

Either with a 'for' loop like in the lib you have attached, or like this attached VI
that's it
Message Edited by devchander on 05-30-2006 05:11 AM
Attachments:
MULTIPLE READ.vi ‏44 KB

How to Read the "text file and csv file" through powershell Scripts

Hi All
i need to add a multiple users in a particular Group through powershell Script how to read the text and CSV files in powershell
am completly new to Powershell scripts any one pls respond ASAP.with step by step process pls
Regards:
Rajeshreddy.k

Hi Rajeshreddy.k,
To add multiple users to one group, I wouldn't use a .csv file since the only value you need from a list is the users to be added.
To start create a list of users that should be added to the group, import this list in a variable called $users, the group distinguishedName in a variable called $Group and simply call the ActiveDirectory cmdlet Add-GroupMember.
$Users = Get-Content -Path 'C:\ListOfUsernames.txt'
$Group = 'CN=MyGroup,OU=MyOrg,DC=domain,DC=lcl'
Add-ADGroupMember -Identity $Group -Members $Users

How to read a text file using Java

Guys,
Good day!
Please help me how to read a text file using Java and create/convert that text file into XML.
Thanks and God Bless.
Regards,
I-Talk

     public void fileRead(){
             File aFile =new File("myFile.txt");
         BufferedReader input = null;
         try {
           input = new BufferedReader( new FileReader(aFile) );
           String line = null;
           while (( line = input.readLine()) != null){
         catch (FileNotFoundException ex) {
           ex.printStackTrace();
         catch (IOException ex){
           ex.printStackTrace();
     }This code is to read a text file. But there is no such thing that will convert your text file to xml file. You have to have a defined XML format. Then you can read your data from text files and insert them inside your xml text. Or you may like to read xml tags from text files and insert your own data. The file format of .txt and .xml is far too different.
cheers
Mohammed Jubaer Arif.

How to read a text/html file in java regardless of its encoding?

Hi All,
How to read a text/html file in java regardless of its encoding?
1. Is there any way to identify that a file (read using FileInputStream/or any other means with java.io package) has been saved with which type of encoding i.e. whether the file is using ANSI encoding or Unicode encoding or other?
2. Is there any standard way to read an encoded file (i.e. files having UTF-16 format for Asian locales character support) and un-encoded file (i.e. files having ordinary ANSI format) correctly without knowing the user input?
The problem is that while creating an instance of 'InputStreamReader' (ISR) we can pass the encoding type used (otherwise it takes the system's default encoding type), and the ISR expects the file to be in the same encoding format otherwise it reads it as some junk. But we don't know which file the user is going to pass whether it is Unicode (for Asian locales file should be in Unicode) with or ANSI coded (for non-Asian / English locales user generally uses ANSI encoding).
Regards,
Sam

1. There is no reliable way of guessing the encoding of a file without that information. Thats why XML for example has very strict rules wrt. it's encoding (short form: use UTF-8 or UTF-16, if you use anything else, you'll have to specify it)
2. you might be able to make an educated guess if the possible range of encodings is limited, but it will probably never be 100% certain
3. The HTML file might have a header entry "<meta http-equiv..." that tells you about it's encoding. You could try to read the start of the file and see if you find that, then if you found it re-read the entire file.
regards

How to read a text file through pl/sql

How to read a text file through pl/sql

pl/sql runs inside the database. so your file also should be on the database server file system for you to be able to read.
check out UTL_FILE package. This is the database package to read/write files on the database server.

How to read Chinese word from a TXT file

File.OpenText() read a TXT File with Chinese word in ;but it not show right.
exam:The TXT File include :中国
this.Txt1.Text=ofd.File.OpenText().ReadToEnd();
but it show :��ʹ�ݼƻ��
How to solve it

What encoding does the text file use? Unlike .NET, Silverlight only supports UTF-8 and UTF-16. File.OpenText() uses UTF-8 by default.
If the text file is in some other encoding, you can create your own encoding class (that derives from System.Text.Encoding) that can be used to read the text file.
class MyEncoding : System.Text.Encoding {
this.Txt1.Text = (new StreamReader(ofd.File.OpenRead(), new MyEncoding())).ReadToEnd();
Regards,
Justin Van Patten
Program Manager
Common Language Runtime

How to read chinese in N97 Mini?

I just bought it in the UK
How can it read chinese in texting and web browsing?
Any software can be installed to solve?

Language support on Nokia phones is a bit of an embarrassment, to be honest. It's pretty hopeless.
As an end user there's nothing you can do yourself. What you can do is take the phone to your nearest Nokia Care Point and ask them to install a Chinese language pack for you. This will give the phone support for Chinese ideograms, both for display and for input. However, please bear in mind that:
1) Not all NCPs will do this for you. Some will claim that it's impossible, and indeed it may well be impossible if you got your phone from an operator rather than SIM-free from an independent retailer or direct from Nokia.
2) You may well be charged for this. The absence of Chinese language support in a phone intended for the UK market is not a fault in the phone, so the warranty cannot be invoked.
3) If you update the firmware at a later date, the chances are that this will wipe out the language pack that was installed and you'll have to have it installed again.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Read chinese text

Hi there,
I'm currently doing a chinese version of my application.I just need to translate the text that is given to me.I thought by just copying and pasting the chinese text, i am able to see the text but i can't
is there any other way that i can ask J2ME MIDlet to read the chinese text. its urgent.
list.append("[�� ]",null);
It turns out like the above.How can i settle this?

http://www.getjar.com/products/5501/CNewsRead

Reading chinese text file

How can a MIDlet read and display the content of the Chinese Text file on Canvas?
ISO8859_1 / UTF8 / UTF16 used? Thanks!

UTF-8 works for all java phone devices showing chinese? Thanks!

How to read the TEXT TABLE (or) .CSV in HSQLDB Standalone using Java

Hi, I like to use the text tables in our application. And like to use the HSQL Database Engine as Standalone. I created the text tables, those are stored in the disk as ".CSV" files. But i am unable to read that text table (.CSV) when i relogin and gave the CSV file path as URL along with "jdbc:hsqldb:file". So can anybody give me the tips how use the text tables.
Regards,
Vinay

You need to make a URLConnection to the page you want, and get the input stream from that page.
The contents of the input stream (use a reader to get them) will give you the raw HTML code. Use a parser to get the actual content. I dont know of a parser offhand, but you can search for one.

Function and Department of contactpersons - how to read the texts

Hello,
we use at the level of contact person the fields FUNCTION and DEPARTMENT where codes represent a function or department.
My question is how could we read the texts in users language for the codes in this fields?
Are there function modules we could use?
Thank you.
Kind regards
Manfred

hi,
Use FM BUPR_CONTP_GET_DETAIL to get the codes of Function and department.
Read the language of the user
Pass those codes along with language to TB911 --> Departments and TB913 --> functions to get the descriptions repectively
Regds,
Raghu

How to read the text file present in the Al11 server through our program?

My requirement is that , i have one file already present in the AL11 server. Now i want to take this file so that I can read this file .
So will you please help me , how to read the file from AL11 server in our program ?
Thankx in advance

Hi..
I too agree to the above post .. SEARCH in SCN before posting..
DATA: lv_filename TYPE string, "File name
        lv_line      TYPE string. "One line entry in a file
lv_filename = iv_file_name.
IF iv_location = gc_application.
    IF iv_record_count IS SUPPLIED.
Open file
      IF gv_file IS INITIAL.
        OPEN DATASET lv_filename FOR INPUT IN TEXT MODE
                                 ENCODING DEFAULT.
                                 ENCODING DEFAULT
                                 IGNORING CONVERSION ERRORS.
        IF sy-subrc <> 0.
          RAISE file_open_error.
        ENDIF.
        gv_file = gc_check.
      ENDIF.
Read data
      DO iv_record_count TIMES.
        READ DATASET lv_filename INTO lv_line.
        IF sy-subrc <> 0.
Close file
          CLOSE DATASET lv_filename.
          IF sy-subrc NE 0.
            RAISE file_close_error.
          ENDIF.
          CLEAR gv_file.
Exit from the loop
          EXIT.
        ENDIF.
Regards
Ansari

How to read a text delimited file using 2 dimentional array in java ??

hi,
I am new to java programming.. I have to do a task where in i have to read a text delimeted file in an array.. For example.. If the file is as follows
Name place Value
adi goa 20
shri mumbai 30
riya bangalr 45
I want it to be read in java so as to get an array[row][columns]
This is something i am currently upto, but cant get any further.
import java.io.BufferedReader;
import java.io.FileReader;
public class generateGML{
public static void main(String[] argv)
throws Exception{
BufferedReader fh = new BufferedReader(new FileReader("filename.txt"));
String s;
while ((s=fh.readLine())!=null){
String[] columns = s.split("\t");
String name = columns[0];
String place = columns[1];
String value = columns[2];
It reads columns,But I want it two dimentionally,as in something like matrix[row_num][column_num].
Can anyone please suggest me..

You could do the following:
String[][] array = new String[rows][];
int row_num = 0;
while ((s=fh.readLine())!=null) {
array[row_num++] = s.split("\t");
}However, you need to know ahead of time how many rows to allocate. If you allocate more than needed, you'll need to copy to a new array, or you'll need to keep track of how much is actually populated. If you allocate less than needed, you'll get an ArrayIndexOutOfBoundsException.
Another (likely better) approach is:
Do you really need it as a 2-dimensional array? Can you make a List of objects that have a name, place, and value? Then you don't need to know how big of a list to allocate ahead of time, assuming you use a list that grows itself (like ArrayList or LinkedList). Your code would be much easier to read if you could say:
String name = list.get(10).getName();instead of
String name = array[10][0];

How to read chinese text in Quickoffice

Similar Messages

Maybe you are looking for