How to reference ALL child objects?

How can I reference ( ALL ) child objects.... for example in
an objects constructor I have applied mouse movement events. But
how could I also code - "apply mousemove events to ALL children of
this object". ?
Note - these child objects have been added AFTER compilation
via the addChild method. They are not children created using
inheritance.

What is it that you're trying to accomplish?
What problem is it that you have, where you think the solution is to get a list of every instantiated object?
What are you planning to do with that list?
Even a very small, short-lived program can easily create hundreds or thousands of objects during its lifetime, so it's unlikely that a complete list will be of any practical use.
If you want to observe, for example, which objects are consuming the majority of your memory because you're trying to reduce the memory footprint, you could use a profiler, such as JProbe, JProfiler, OptimizeIt, or VisualVM.

Similar Messages

All child objects - WS 2.0

Anybody knows how to query all child objects of a parent object?
If I refer all contacts, each contact has only 10 child objects (eg CustomObject6), instead of all. Currently, if I set the ListOfCustomObject6 into ContactQuery, I only have a list of 10 CustomObject6.
I need each contact has a full list of its child objects.

You have to make multiple queries to return all of a particular child object. Refer to the lastpage and recordcount tags in the documentation.

How to activate all inactive objects for current user

Hi
How to activate all inactive objects for current user ...
... I have found a (long winded) way to do this:
- Environment / Inactive Objects
- Add to Worklist
- Display Worklist
- Select All
- Activate
this will open a dialog titled "Inactive Objects for <username>"
which has the exact functionality I need ... but I can't figure out how to get to this dialog directly - without so many intermediate steps
the SAP docs repeatedly mention the ability to activate the inactive worklist - but do not mention how
does anybody know the TCode for this dialog?
thanks
ps does the term "mass activation" apply to importing change requests rather than development activation?
Edited by: FireBean500 on Jun 4, 2010 11:07 PM

No other way. But usually it's far more simple as all objects are already in our own worklist.
I wonder why your objects are not already in your worklist, as everytime you create or maintain an object, it is added to your worklist.

How to recompile all invalid objects of APPS?

Dear all:
How to recompile all invalid objects of APPS? my environment is ORACLE 9.2.0.5 32bit.
Regards
Terry

varun4dba wrote:
hi Terry,
did you tried adadmin?
thanks.Do you mean:
Compile/Reload Database Objects
1. Compile APPS schema
2. Compile menu information
3. Recreate grants and synonyms for APPS schema
4. Compile flexfield data in AOL tables
5. Reload JAR files to database
6. Return to Main Menu

How to get all the objects in a stack frame

Hi, what I'm trying to do is get all the objects on the top of the stack and time stamp them.
What I have is this:
static void mearthScanStack(jvmtiEnv *env, jmethodID method, jthread thread){
       jobject obj;
       int i;
       jlong tag;
       jvmtiError err;
       jvmtiLocalVariableEntry *localVarTable;
       jint entryCount;
          err = (*env)->GetLocalVariableTable(env, method, &entryCount, &localVarTable);
          if(err == JVMTI_ERROR_ABSENT_INFORMATION || err == JVMTI_ERROR_NATIVE_METHOD){
               return;
          check_jvmti_error(gdata->jvmti, err, "mearthScanStack: Could not get local variable table");
          for(i = 0; i < entryCount; i++){
               if( (localVarTable.signature)[0] == 'L'){
                    err = (*env)->GetLocalObject(env,     thread, 0, localVarTable[i].slot, &obj);
     check_jvmti_error(gdata->jvmti, err, "mearthScanStack: Could not get local object");
                    err = (*env)->GetTag(env, obj, &tag);
                    check_jvmti_error(gdata->jvmti, err, "mearthScanStack: Could not get tag for local object");
                    timeStampObject(env, obj);
          (*env)->Deallocate(env, localVarTable);
}To walk through, first I get the local object variable table, then I loop through each entry in the table. I check each entries signature to see if it is an object (starts with "L"), and if it is, I try get its tag, and time stamp it.
This doesn't seem to work, however, because I get JVMTI_ERROR_INVALID_SLOT errors on the call to GetLocalObject. How can it be an invalid slot if I am getting the slot out of the local variable table? Am I going about this the right way
Additionally, when I get the the table, I'm ignoring the JVMTI_ERROR_ABSENT_INFORMATION error. I'm not exactly sure under what circustances this information is absent. Is there a way I could scan the stack frame even if it is not available (just probe through the slots maybe?)
Any help is greatly appreciated.

I would think if you intanciate the XMLReference and use IIDXMLElement GetChildCount / GetNthChild would do what you are looking for.
Ian

How to compile all invalid objects in SQL Developer

Hi
I am used to PL\SQL Developer and currently I am testing SQL Developer (version 2.1). I have question where can I find in SQL Developer functionality (or how to invoke those functions) like:
1 ) To list all invalid objects and then compile them.
2) Invoke window similar to “Command window” in PL\Sql Developer
Thanks for help
Groxy

Could I please revive this and ask how do I use UTL_RECOMP?
Also, I could not find a description of the icons in SQL Developer. Some procedures are shown with a green plus sign (I am guessing here since I can't make out what it is) on them and the ones that I right-click and compile have this green go away. Can you explain?
Thanks a lot.

Newbie: How can find all unused objects in XI ?

How can I find all unused objects in XI Integration Repository?
Thanks,
Badari

Hi,
Have a look at these thread, it might be helpful to you
XI Server Object Cleanup
How to delete Integration Repository Objects?
Thanks,
Pooja
ps: please mark helpful answers

How to replace all existed objects when impdp a schame ???

I wrote 2 functions which do expdp and impdp
the impdp funciton is :
create or replace function impdp_schema(fromusr in varchar2,
                                        tousr   in varchar2,
                                        dir     in varchar2,
                                        dmpfile in varchar2,
                                        logfile in varchar2 default null)
return number as
h1        NUMBER;
job_name varchar2(128);
job_state varchar2(32767);
ret       number;
BEGIN
if dir is null or dmpfile is null then
    return 1;
end if;
ret := 0;
job_name := 'IMP' || to_char(sysdate, 'yyyymmddhh24miss');
h1 := DBMS_DATAPUMP.OPEN('IMPORT',
                           'SCHEMA',
                           NULL,
                           job_name,
                           'COMPATIBLE',
                           DBMS_DATAPUMP.KU$_COMPRESS_METADATA);
DBMS_DATAPUMP.ADD_FILE(h1,
                         dmpfile,
                         dir,
                         null,
                         DBMS_DATAPUMP.KU$_FILE_TYPE_DUMP_FILE);
if logfile is not null then
    DBMS_DATAPUMP.ADD_FILE(h1,
                           logfile,
                           dir,
                           null,
                           DBMS_DATAPUMP.KU$_FILE_TYPE_LOG_FILE);
end if;
DBMS_DATAPUMP.METADATA_REMAP(h1,
                               'REMAP_SCHEMA',
                               UPPER(fromusr),
                               UPPER(tousr));
DBMS_DATAPUMP.set_parameter(h1, 'TABLE_EXISTS_ACTION', 'REPLACE');
DBMS_DATAPUMP.START_JOB(h1);
dbms_datapump.wait_for_job(h1, job_state);
dbms_datapump.detach(h1);
dbms_output.put_line(job_state);
return ret;
exception
when others then
    dbms_output.put_line(SQLERRM);
    dbms_datapump.detach(h1);
    return 1;
END;------------------------------------
when I test this function, I found some errors :
Master table "SYS"."IMP20100823152536" successfully loaded/unloaded
Starting "SYS"."IMP20100823152536":
Processing object type SCHEMA_EXPORT/USER
ORA-31684: Object type USER:"WIS00001" already exists
Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
Processing object type SCHEMA_EXPORT/ROLE_GRANT
Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
Processing object type SCHEMA_EXPORT/SEQUENCE/SEQUENCE
ORA-31684: Object type SEQUENCE:"WIS00001"."SEQ_ID_WIS_LOG" already exists
ORA-31684: Object type SEQUENCE:"WIS00001"."SEQ_TID_TABLENAME" already exists
ORA-31684: Object type SEQUENCE:"WIS00001"."SEQ_WIS_MASS" already exists
ORA-31684: Object type SEQUENCE:"WIS00001"."SEQ_WITSDELAY_1" already exists
ORA-31684: Object type SEQUENCE:"WIS00001"."SEQ_WITSDELAY_2" already exists
ORA-31684: Object type SEQUENCE:"WIS00001"."SEQ_WITSDELAY_3" already exists
ORA-31684: Object type SEQUENCE:"WIS00001"."SEQ_WITSEDIT" already exists
Processing object type SCHEMA_EXPORT/TABLE/TABLE
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
. . imported "WIS00001"."WITS_98_PIC"                    28.28 KB      97 rows
. . imported "WIS00001"."DRAWING_CONTROL"                26.94 KB     218 rows
Processing object type SCHEMA_EXPORT/TABLE/GRANT/OWNER_GRANT/OBJECT_GRANT
Processing object type SCHEMA_EXPORT/TABLE/INDEX/INDEX
Processing object type SCHEMA_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
Processing object type SCHEMA_EXPORT/PROCEDURE/PROCEDURE
ORA-31684: Object type PROCEDURE:"WIS00001"."PROC_GETITEM" already exists
Processing object type SCHEMA_EXPORT/PROCEDURE/ALTER_PROCEDURE
Processing object type SCHEMA_EXPORT/TABLE/TRIGGER
**Job "SYS"."IMP20100823152536" completed with 9 error(s) at 15:30:12**---------------
how to replace all objects when exist ??? include sequence, table, procedure/function???
</pre>
Edited by: UNISTD on 2010-8-23 上午12:50

I love posts without a 4 digit version number. This may well be because of a bug, and as this post is lacking a 4 digit version number, nobody will be able to answer it.
You posted in vain.
I recommend you search on Metalink whether there are issues with this parameter.
Sybrand Bakker
Senior Oracle DBA

HOW TO DELETE ALL INFO OBJECTS IN A SYSTEM

HI! gurus,
I want to know how to delete all user created info objects in my laptop.the situation is while practicing SAP in my laptop ...creation of user info objects occured heavily resulting in degrading the system performance.so is there any procedure to delete all info objects(user created)making a system a newly SAP installed one....please help me....
Regards
Ravikanth Pinipolu

Hi Ravi,
u can try it manually to delete the User defined objects..
or u can use the prg: RSDG_IOBJ_DELETE and in that u can give some selection of objects for the deletion..
Give it a try..
Thanks
Hope this helps

How to delete all users (objects) in 9i database?

Hi friends:
I did a full database exp/imp for a dev database, before imp, I need to delete all objects in the old dev database, I know delete one user is
drop user user_name cascade;
how about all users (objects)???? in 9i database
thank you very much

Hi,
I will use
select ' drop user ' ||username|| ' cascade;' from all_users where username not
in ('SYS','SYSTEM', ‘DBSNMP’);
Is there any other users I don't need to drop off besides the above three ones?
thank you very much

How can get all anchored objects?

How can we get a document's all anchored objects labeled as "Anchored" by 1 or 2 line javascript code?

myAnchs = app.documents[0].stories.everyItem().pageItems.item("Anchored").getElements();
returns an array of all such anchored items.
Dave

How to map between child objects in a Siebel Data Map

Hello. I need to map a field from one child object to another child object using a Siebel Data Map.
Specifically, I have an Integration Object set up for FINS Group Policy with 2 child components (Action and Proposal). I want to map the Proposal's name to the Activity's Description. Here's the structure:
Policy (io)
-Name
-Action (io)
--Description
-Proposal (io)
--PPSLFileName (this is the proposal's file name)
I can map from the parent (Policy) to the child (Action) as follows:
Integration Component Map: Action-to_Action
Source Expression: [FINS Group Policy.Name]
Target Field Name: Description
This will map the Policy's Name to the Activity's Description.
I tried these, but they don't work:
1)
Integration Component Map: Action-to_Action
Source Expression: [FINS Group Policy.Proposal.PPSLFileName]
Target Field Name: Description
2)
Integration Component Map: Action-to_Action
Source Expression: [Proposal.PPSLFileName]
Target Field Name: Description
Thanks for any help

Hi,
For your issue,you can use the 2nd point what u hv mentioned :-
Integration Component Map: Action-to_Action
Source Expression: [Proposal.PPSLFileName]
Target Field Name: Description
But it has some limitations,i.e the child's(Proposal) cardinality should be 1 or less than 1 i.e no. of instances of Proposal IC should not exceed 1 or else the data map will error out at runtime.
Regards,
Sambit

How to find all the objects by Module.

Hey all,
Can any one please help me in finding all the objects by Module.
I need to have all the objects(like app engines, records, fields, file layouts, etc,.) in AP, AM, GL, BI, AR.
thank you,
Bye.

You can use the OwnerID field as a starting point. The reason why i say that is because there are some objects that cross-over between more than one module.
http://www.CompShack.com

How to get all authorization objects for a certain authorization profile

Hi ABAP experts,
I have the following problem: for a certain authorization profile of a role (created with transaction PFCG) I would like to get all contained authorization objects: e.g. for the contained object PLOG I would like to know/read all corresponding parameter values.
So:
- where are these values stored (dictionary table)?
- is there already a FM or a report to read all authoriation values for a certain authorization profile?
Thanks in advance.
Best regards,
Oliver

Hi,
check the following it might useful for you:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a92195a9-0b01-0010-909c-f330ea4a585c
if helpful reward points are appreciated

How to find all child tables

Hi,
I have a set of tables that are in multi level hierarchy.
Here is the example.
Table1 (id is primary key)
Table2 (id,loc is primary key. and id is refering to table1.id) Table3(id,name is primary key and id is refering to table1)
Table 4(emp_id,group,name,loc_grp is PK. emp_id and loc_grp is refering to table2) Table5(std_id,name,dpt,sal is pk and std_id,name is refering to table3)
Now, I want to get all tables and their columns that are refering to Table1.id. In this example, it should return table2, table3,table4 and table5 along with their columns.
some thing like this.
Table_name Column_name
Table2 id
Table3 id
Table4 emp_id
Table5 std_id
Please suggest how to get this.

HI ,please try this one .
SELECT a.table_name, c.column_name, b.table_name AS child_table,
       d.column_name, b.r_constraint_name
FROM user_constraints a,
       user_constraints b,
       user_ind_columns c,
       user_cons_columns d
WHERE a.constraint_type = 'P'
   AND a.constraint_name = b.r_constraint_name
   AND b.constraint_type = 'R'
   AND a.table_name = c.table_name
   AND a.constraint_name = c.index_name
   AND b.constraint_name = d.constraint_name
   AND a.table_name = '<TABLE_NAME>' ;thanks,
P Prakash

How to reference ALL child objects?

Similar Messages

Maybe you are looking for