How to refresh the grid so that default values come on adding new row.
Hi Experts,
In alv grid while adding new row, i want some 2-3 column values to come by default from already existing row in grid.
i am getting new row in internal table with 2-3 default values and rest columns blank on adding new row in alv grid
but the entire row is coming blank, not able to get the default values in new row
how can i refresh the grid so that default values come on adding new row.
thanks
Hi Surabhi,
Use this in Interactive section even if you are doing simple ALV.
DATA:
lv_ref_grid TYPE REF TO cl_gui_alv_grid.
CLEAR : gv_tcode.
*-- to ensure that only new processed data is displayed
IF lv_ref_grid IS INITIAL.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
e_grid = lv_ref_grid.
ENDIF.
IF NOT lv_ref_grid IS INITIAL.
CALL METHOD lv_ref_grid->check_changed_data.
ENDIF.
THis will solve your problem.
Regards,
Vijay
Similar Messages
-
How do I get DVD for the Windows 7 that should have come with my new laptop please
This is my first message here so please bear with me. I have just bought a new Lenovo Essentials B570 laptop which has come with Windows 7 pre-installed. Previously I used to buy Dell laptops which used to come with OS Re-installation DVDs which check to see if they are being installed on the hardware it was bought for but would allow us to install the OS on a new hard disk if the original one crashed. Now Lenovo seems to be using a very complicated method to allow buyer's to re-install the OS - they are expected to retain the same hard disk - but what happens is the hard disk crashes and one wants to install the OS along with all the drivers? The Dell DVD allows me to do precisely that. Can I create a similar disk to install the OS on a new hard disk as and when I want/need it please? I have created two sets of DVDs using the OKR software - one set using the 'system presently on disk' and another set for 'resetting to factory defaults' - but from what I have read on these forums these OKR disks would not work if I put a completely new hard disk. So at least if I can get hold of the correct version of the Windows DVD - as I have paid for the license I would be very grateful. Thank you.
Solved!
Go to Solution.yigit wrote:
http://forum.lenovo.com/t5/Lenovo-3000-and-Essential/How-to-create-quot-Factory-Default-Recovery-Dis...
Thanks for the quick reply.
But to me this looks more like a OKR solution and I have already created these Factory Reset discs.
Will these discs work if I have installed a completely new hard disk in the dive? Because that is what I would need to do in the rare event that I have a complete hard disk failure.
What is confusing is the fact that on these forums, I find many messages which indicate that the OKR solution would work only with the original hard disk and it would not work with a completely new hard disk and also that the OKR itself would not be able to change partitions on the hard disk - even when it is the original hard disk. To me this means any disks that are created using the OKR would be useless when the original hard disk has undergone severe change or a completely new hard disk is in its place. Correct me if I am wrong. (In fact I am hoping that I am wrong in that assumption.)
My laptop has a 750GB hard disk and it has Windows 7, 64bit. I actually want to make this into a dual boot machine with KUbuntu. What is stopping me attempting that is the fact that C drive has bigger partition and D drive is a smaller partition (too small in fact - 30GB these days is practically nothing) and I learn that any modifications I do to drive partitions would render the OKR non functional.
I can live without this simplistic one key rescue operation if I have recourse to the Windows 7 DVD and that is why I asked the question. -
How to get the SQL Signon that Agent Jobs "Run As" or "Executed as User"
How to get the SQL Signon that Agent Jobs "Run As" or "Executed as User"?
I have an install SQL scripts that creates a Linked Server. I want to put some security on the Linked Server and only grant the Agent Job Signon (the "Run As" or "Executed as User") access to the linked server. I need to retrieve the
Agent Job Signon (something like "NT SERVICE\SQLAgent$FIDEV360BI02").
I could query certain jobs and SUBSTRING the Message column - using some form of the query below, which would return "Executed as user: NT SERVICE\SQLAgent$SSDEVBI02. The step succeeded." But that is pretty imprecise.
use msdb
SELECT [JobName] = JOB.name,
[Step] = HIST.step_id,
[StepName] = HIST.step_name,
[Message] = HIST.message,
[Status] = CASE WHEN HIST.run_status = 0 THEN 'Failed'
WHEN HIST.run_status = 1 THEN 'Succeeded'
WHEN HIST.run_status = 2 THEN 'Retry'
WHEN HIST.run_status = 3 THEN 'Canceled'
END,
[RunDate] = HIST.run_date,
[RunTime] = HIST.run_time,
[Duration] = HIST.run_duration,
[Retries] = HIST.retries_attempted
FROM sysjobs JOB
INNER JOIN sysjobhistory HIST ON HIST.job_id = JOB.job_id
-- CHANGE THIS
-- WHERE JOB.name like '%GroupMaster%' or Job.name like '%etlv%'
ORDER BY HIST.run_date, HIST.run_timeby default all sql jobs are executed as sql server agent account, unless otherwise a proxy is setup.
you can get the proxy information as Olaf mentioned, if the proxy_id is null for the step, it implies that the job step was executed as sql server service account and in such case it will be null
so, if it is null, it ran as sql server agent account.
so, one work around is get the sql server agent service account and if the proxy is null, that means it ran as sql server agent account, so, use isnull function. the disadvantage would be if the sql server agent account was switched, you might not get the
accurate information as the new account will show up though the job really ran as old account, to get this information, you need to get this from the logmessage column as you mentioned above.
try this code...
/*from sql 2008r2 sp1, you get the service accounts using tsql,otherwise you have to query the registry keys*/
declare @sqlserveragentaccount varchar(2000)
select @sqlserveragentaccount= service_account
from sys.dm_server_services
where servicename like '%sql%server%agent%'
select message,isnull(name,@sqlserveragentaccount) as AccountName
from sysjobhistory a inner join sysjobsteps b
on a.step_id=b.step_id and a.job_id=b.job_id
left outer join sysproxies c on c.proxy_id=b.proxy_id
Hope it Helps!! -
Hi,
I have an ALV Tree report developed using the OOPS. In my ALV Tree output, I have some buttons which will update the database after clicking. The data is correctly updating in the database. But, it is not getting updated in the ALV Tree display. That means, it is not REFRESHing the ALV Tree display. We have to again execute the program in order to see the updated output.
Could anyone please suggest me how to Refresh the ALV Tree display..?
We can't use the method 'REFRESH_TABLE_DISPLAY' as it is a PRIVATE method is the class CL_GUI_ALV_TREE.
Please share your valuable thoughts.
Thanks & Regards,
Paddu.Hi paddu.
please check out the link mentioned below,this will help u.
How to Refresh data on ALV tree
Regards
Theres -
When I send an email the rely comes into another account in my apple email. How do I set it so that my email comes to the correct address?
Hi Sunny C,
Welcome to the Support Communities! The "From" field should be showing by default, but you can check or change your settings for Mail with the instructions below:
Mail (Yosemite): Set Mail preferences
http://support.apple.com/kb/PH19178
In the Composing pane, you can set the email account that you want to send new messages from.
Also, check the View command on the Menu bar. View > Message Attributes should have a checkmark beside the "From" field.
Cheers,
Judy -
hi, since the last update i find my rented movies remained under rented although unplayable. now i find some, as before the update, are deleting fully - can anyone tell me how to delete the unwatchable covers that remain?
bunjamin wrote:
There is now a new line in BBM that wasn't there before which covers the message that I am typing, so I can't actually see what I am typing.
Hi bunjamin,
just go to BlackBerry World, and update all your apps including BBM.
bunjamin wrote:
Every time I unlock my phone, my screen enlarges so I can't really see much on the hub/notification screen and it defaults to the hub which it didn't do before).
you can turn off the magnifying glass :
device settings >> accessibility >> magnify mode >> OFF
you can deactivate the "reset to Hub view" :
hub >> overflow (bottom right button) >> Settings >> Display and actions >> Return to Default View When Idle >> OFF
bunjamin wrote:
my ringtone is much softer than it was previously
yes, BlackBerry has acknowledged this bug in this article from the public knowledge base:
KB36755 After upgrading BlackBerry 10 OS to version 10.3.1 the volume for notifications is noticed to be significantly lower than in the previous version
The search box on top-right of this page is your true friend, and the public Knowledge Base too: -
How to refresh the table control on some action
Hi All,
In a web Dynpro application, I am filling data to the Table control through Supply function. When I do some action (like save new record ) i want to refresh the table control means add the newly added record.
How to refresh the Table control.
Thanks
Hemalathahi hema........
if you are using a select query inside the supply function...
then...
you can just use node->invalidate(). method..
it just invalidates the node that is bound to the table.
so the supply function will be called again, which again uses the select query to fetch the values.. so that your table gets refreshed.
---regards,
alex b justin -
How to refresh the client area
i used javax.swing.JPanel and drawed many shapes with paintComponent method. i wonder how to refresh the client area.
ps: i first used paint method to draw shapes, but i found a copy of the menu bar appeared. at last i found paintComponent method works, but when i tried to refresh the client area with repaint, the same scene appears.
could some one help me?
thanks in advance!when i tried to refresh the client area with repaint, the same scene appears. When you invoke repaint() on a component, the paintComponent() method of that component is invoked. So unless your code in that method is different, the image painted will be the same.
-
How to refresh the filed catalog of POWL
Hi all,
How to refresh the field catalog of POWL? The requirement is that the result list should meet the selection/query criteria. Even the system has executed the mehod GET_FIELD_CATALOG in feeder class, the filed catalog still keep the the original look. I have to switch to other query and then reswith back, then the field catalog changed to the new one.
Thanks & best regards
JuliaHello,
When you refresh the query, only then it goes to the method you have mentioned.
Also when you switch between the query, you have to do the refresh manually or there is personalization for query, On every visit of page, This option is avaible from 7.02 release.
Best regards,R
Rohit -
How to chage the grid and flip pages
How to change the grid to horizontal, and flip pages?
Hi saidimd,
Are you referring to rotating the pages of a PDF file? If so, you would need to use Acrobat for that. In Reader, you can change rotate the page display, but that doesn't actually rotate the pages themselves.
Best,
Sara -
How to refresh the Oracle Cache?
Hi,
I am dealing with millions of records. Every time, the cache is full. It causes my system to be slow. Could any one tell, how to refresh the cache.
Thanks and regards
Gowtham Sen.Hi Eric,
I think that, it may cause the system to be slow. Actually my system (LINUX server Enterprise 3 ) has 1GB RAM.
There I am running DB 10g , Work flow server 2.6.3, OWB 10G, Oracle Middle ware (HTTP server, portals).
I don't know, why the systen is too slow?
Could you please give some suggestions to increase the performace.
Thanks and regards
Gowtham Sen. -
How to refresh the list of select one choice which is inside a table?
Hello I am using Jdeveloper Version 11.1.2.1.0.
The table is a normal table that is made to look like a treeTable.
For some rows are or can be parents with Parent_vo_group_id = null and other are children with parent_vo_group_id = vo_group_id of the parent...
If a children changes its parent_vo_group_id to null it can become a parent as well.
I am having a select one choice inside a table column. The list comes from the same table with column Name:
<af:table value="#{bindings.VoGroupAdminView2.collectionModel}" var="row"
rows="#{bindings.VoGroupAdminView2.rangeSize}"
contentDelivery="immediate"
visible="#{bindings.VoGroupAdminView2Iterator.currentRow != null}"
fetchSize="#{bindings.VoGroupAdminView2.rangeSize}"
partialTriggers="::soc1" styleClass="AFStretchWidth"
rowBandingInterval="0" editingMode="clickToEdit"
binding="#{adminGroupManagementBean.groupTable}"
selectionListener="#{adminGroupManagementBean.groupSelectionListener}"
rowSelection="single" id="t5">
<af:column sortProperty="#{bindings.VoGroupAdminView2.hints.Name.name}"
sortable="false" styleClass="columnData"
headerClass="tableHeader"
headerText="#{bindings.VoGroupAdminView2.hints.Name.label}"
id="c1">
<af:inputText value="#{row.bindings.Name.inputValue}"
requiredMessageDetail="Please enter a group name"
label="#{bindings.VoGroupAdminView2.hints.Name.label}"
required="true" id="it7" immediate="true" autoSubmit="true"
columns="#{bindings.VoGroupAdminView2.hints.Name.displayWidth}"
maximumLength="#{bindings.VoGroupAdminView2.hints.Name.precision}"
shortDesc="#{bindings.VoGroupAdminView2.hints.Name.tooltip}"
contentStyle="#{row.ParentVoGroupId eq null? 'font-weight:bold' : 'padding-left:20px'}"
valueChangeListener="#{adminGroupManagementBean.groupNameChangeListener}"
partialTriggers="soc2">
<f:validator binding="#{row.bindings.Name.validator}"/>
</af:inputText>
</af:column>
<af:column sortProperty="#{bindings.VoGroupAdminView2.hints.ParentVoGroupId.name}"
sortable="false" styleClass="columnData"
headerClass="tableHeader"
headerText="#{bindings.VoGroupAdminView2.hints.ParentVoGroupId.label}"
id="c4">
<af:selectOneChoice value="#{row.bindings.ParentVoGroupId.inputValue}"
label="#{row.bindings.ParentVoGroupId.label}"
simple="true" immediate="true"
required="#{bindings.VoGroupAdminView2.hints.ParentVoGroupId.mandatory}"
shortDesc="#{bindings.VoGroupAdminView2.hints.ParentVoGroupId.tooltip}"
id="soc2" autoSubmit="true"
unselectedLabel="<null>"
valueChangeListener="#{adminGroupManagementBean.parentIdValueChangeListener}"
visible="#{row.bindings.ChildrenCount.inputValue eq 0 ? true : false}">
<f:selectItems binding="#{adminGroupManagementBean.selectOneChoiceList}"
value="#{row.bindings.ParentVoGroupId.items}"
id="si2"/>
</af:selectOneChoice>
</af:column>
</af:table> My select one choice uses the same iterator as the table.
<iterator Binds="VoGroupAdminView2" RangeSize="-1" DataControl="AppModuleDataControl" id="VoGroupAdminView2Iterator"/>The table uses this view called VoGroupAdminView:
Select t1.vo_Group_id,
t1.name,
t1.Vehicle_Owner_Id,
t1.Graphical_Symbol,
t1.Lm_Comment,
t1.Parent_Vo_Group_Id ,
decode (t2.children_count, null, 0, t2.children_count) as children_count
from
(SELECT VoGroup.vo_Group_id,
VoGroup.name,
VoGroup.Vehicle_Owner_Id,
VoGroup.Graphical_Symbol,
VoGroup.Lm_Comment,
VoGroup.Parent_Vo_Group_Id
FROM VO_GROUP VoGroup
START WITH VoGroup.Parent_Vo_Group_Id IS NULL
CONNECT BY VoGroup.Parent_Vo_Group_Id = PRIOR VoGroup.Vo_Group_Id
order SIBLINGS by VoGroup.name) t1,
(select parent_vo_group_id, count (parent_vo_group_id) as children_count from vo_group
group by parent_vo_group_id) t2
where t1.vo_group_id = t2.parent_vo_group_id (+)the ParentVoGroupId attribute has list of values from this view object called VoGroupAdminLov:
SELECT
VO_GROUP.NAME,
VO_GROUP.VEHICLE_OWNER_ID,
VO_GROUP.PARENT_VO_GROUP_ID,
VO_GROUP.VO_GROUP_ID
FROM
VO_GROUP
WHERE VO_GROUP.PARENT_VO_GROUP_ID is null
and VO_GROUP.VO_GROUP_ID <> ?
order by VO_GROUP.NAMEI want to refresh the list of values in the select one choice everytime when i add a new row in the table, delete row in the table or change the value of select one choice component.
What I have tried:
public void parentIdValueChangeListener(ValueChangeEvent valueChangeEvent) {
this.setValueToEL("#{row.bindings.ParentVoGroupId.inputValue}", valueChangeEvent.getNewValue());
BindingContainer bc = BindingContext.getCurrent().getCurrentBindingsEntry();
DCIteratorBinding voGroupAdminIterator = (DCIteratorBinding)bc.get("VoGroupAdminView2Iterator");
Key selectedGroupKey = voGroupAdminIterator.getCurrentRow().getKey();
AppModuleImpl am = (AppModuleImpl)ADFUtils.getApplicationModuleForDataControl("AppModuleDataControl");
am.getTransaction().postChanges();
am.getVoGroupAdminView2().executeQuery(); //refresh the table view object;
am.getVoGroupAdminLov1().executeQuery(); //refresh the list of values view object
voGroupAdminIterator.invalidateCache(); //remove the cache of the iterator
voGroupAdminIterator.setCurrentRowWithKey(selectedGroupKey.toStringFormat(true)); // set the selected row again.
RichSelectOneChoice soc =
(RichSelectOneChoice)FacesContext.getCurrentInstance().getViewRoot().findComponent(":pt1:t5:soc2");
AdfFacesContext.getCurrentInstance().addPartialTarget(soc);
AdfFacesContext.getCurrentInstance().addPartialTarget(this.groupTable);
}When i am adding a new row to the table its select one choice list is refreshed but only for the new row. The rest rows have not updated list of values for their select one choice components.
public String addGroupButtonAction() {
AppModuleImpl am = (AppModuleImpl)ADFUtils.getApplicationModuleForDataControl("AppModuleDataControl");
ViewObjectImpl voGroupAdminView = am.getVoGroupAdminView2();
Row newRow = voGroupAdminView.createRow();
newRow.setNewRowState(Row.STATUS_INITIALIZED);
voGroupAdminView.insertRowAtRangeIndex(0, newRow);
am.getTransaction().postChanges();
return "null";
}Edited by: 897833 on Mar 19, 2012 9:07 AMI made a button to refresh the value of select one choice and it doesn't work yet.
So I just move one of the
public String refreshParentIdSOCButtonAction() {
BindingContainer bc = BindingContext.getCurrent().getCurrentBindingsEntry();
DCIteratorBinding voGroupAdminIterator = (DCIteratorBinding)bc.get("VoGroupAdminView2Iterator");
Key selectedGroupKey = voGroupAdminIterator.getCurrentRow().getKey();
AppModuleImpl am = (AppModuleImpl)ADFUtils.getApplicationModuleForDataControl("AppModuleDataControl");
am.getTransaction().postChanges();
am.getVoGroupAdminView2().executeQuery();
am.getVoGroupAdminLov1().executeQuery();
voGroupAdminIterator.invalidateCache();
voGroupAdminIterator.setCurrentRowWithKey(selectedGroupKey.toStringFormat(true));
AdfFacesContext.getCurrentInstance().addPartialTarget(this.parentIdSelectOneChoice); //refresh the binded SOC as you said
AdfFacesContext.getCurrentInstance().addPartialTarget(this.parentIdSelectOneChoiceList); //refresh the binded list even
AdfFacesContext.getCurrentInstance().addPartialTarget(this.groupTable); //refresh the table it is in;
return null;
}Edited by: 897833 on Mar 23, 2012 2:58 AM -
How to refresh the textedit object in module pool
Hi All,
I would appreciate if anybody can solve my problem.
Problem is i have created one TEXTEDIT and now when user clicks on the cancel button and come back to the screen the data which was previously entered is still coming up.
Please tell me how to refresh the data in TEXTEDIT.actualy it is enough to do the following, assuming you have a container to put the textedit into it:
DATA: l_parent_container TYPE REF TO cl_gui_custom_container,
l_obj_editor TYPE REF TO cl_gui_textedit, "make this a global variable
l_text_table TYPE re_t_textline,
l_itftext TYPE STANDARD TABLE OF tline,
l_thead TYPE thead.
l_parent_container = ... "your container
move .... to l_thead... "your text header to read or reread
read text from SO10
CALL FUNCTION 'READ_TEXT'
EXPORTING
id = l_thead-tdid "Text-ID
language = l_thead-tdspras "im_request-language?
name = l_thead-tdname "TDIC Text-Name
object = l_thead-tdobject "Texte: Anwendungsobjekt
TABLES
lines = l_itftext
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
convert itf text to stream text (SAPSCRIPT_DEMO_NOTE_EDITOR)
CALL FUNCTION 'CONVERT_ITF_TO_STREAM_TEXT'
TABLES
itf_text = l_itftext
text_stream = l_text_table.
IF l_obj_editor IS INITIAL.
CREATE OBJECT l_obj_editor
EXPORTING parent = l_parent_container. " Abstract Container for GUI Controls
ENDIF.
discard any previous changes
l_obj_editor->set_textmodified_status( cl_gui_textedit=>false ).
übertragen text in editor
CALL METHOD l_obj_editor->set_text_as_stream
EXPORTING
text = l_text_table
EXCEPTIONS
error_dp = 1
error_dp_create = 2. -
I have 100 songs on i pod touch. But when i connect it to itunes it only showed 44 songs. What is actually happening and how to fix the problem so that all music in my iphone can be seen in my itune
If they are iTunes purchased music then go to Settings>iTunes and App Store and turn off Show All.
Next
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device. -
My itunes library has automatically started to list my songs alphabetically. I do not want this. How do I change it so that when albums come up, the songs are listed in the order of the imported album, NOT alphabetically.
For the missing Artists on your iPod, make sure their tracks in iTunes are not marked as "Part of a compilation" in iTunes. You can do this by highlighting the track, right->clicking on them and choosing "Get Info" from the shortcut menu. When the window pops up, head over to the Info tab and make sure there is NO tick mark next to this option in the lower right hand corner. Lastly, sync the updated changes to your iPod.
B-rock
Maybe you are looking for
-
Fusion HDR Pro 32bit way too dark
Hi, I often use Fusion HDR Pro in 32bit mode with final ajustements in ACR to control high contrast situations. I now have un issue in PS CC 2014 with a fusion image (in ACR) which is way too dark and contrasty. The same treatment in PS CC (not 2014)
-
How do I install plugins for PSE 11
Cant find tutorials, cant find nuthing on getting my Topaz and Perfect Effects 4 to show up.
-
I have deleted a load of messages from my sent (about 3,000) and also deleted folders with big email files in them. I started off with 3GB of mail storage and now i am only 2.9GB when i know i have deleted at least 2GB. Not sure why this has happened
-
[JS CS3] Conflict between palettes and panels
Hello, I am having a conflict between panels and palettes. Hopefully I can get some direction without having to copy the code here, because it is very long. I have a window of the palette type. This palette has buttons and radio buttons. The buttons
-
I'm new, please bear with me, I need help with connecting Airport extreme
I have been using a Dell desktop pc, running Windows XP for the past few years. I have a dsl modem, (qwest m1000)hooked up for my internet acces. Just bought a new MacPro laptop and the airport extreme. Can I connect the new router to my dsl mdem and