How to relate ring control with multiple codes

Hello everyone,
I've been searching everywhere without finding answer, please apologize if its already in a post. What I am trying to do is to gather different codes and put them together. These pieces of codes control certain devices and currently I am using different interfaces for each device, so I want to control them in the same interface. I am using a ring recessed menu ring in order to select the appropriate device for the desired application. So, if someone could possibly tell me how to put the ring control to work I would appreciate.
Thanks,
LM

Hi LM,
Let me start by ensuring my understanding of your question. You have multiple devices, each which require different code to operate them. You are currently using different programs to control each instrument and would like to combine into one. You want to allow the user to select from a Ring Control which device to use then execute the correct code. Is this correct?
Assuming it is, this is fairly straightforward. Add the labels and values to your Ring Control as well as a GO button to your UIR. Add a callback function to the GO button. In the callback function, add conditional code that executes a different block depending on the selected value of the Ring Control. Let me know if you have questions on this process.

Similar Messages

How to handle Table controls with XD01 in BDC

How to handle Table controls with XD01 in BDC - If there are more than 5/6 records in Table control. - Can any one explain it with a piece of code plz..
Thanks & Regards,
Krishna Chaitanya

Hi
check this code...viz for xko1....
DATA: BEGIN OF it_xk01 OCCURS 0,
        f1(1),
        f2(5),
        f3(5),
        f4(9),
        f5(9),
      END OF it_xk01.
DATA: v_count(2) VALUE '00',
      v_koinh(14),
      v_banks(14),
      v_bankn(14),
      v_bankl(14),
      it_bdcdata TYPE STANDARD TABLE OF bdcdata WITH HEADER LINE,
      wa_ctuparams type ctu_params.
PARAMETERS: p_file TYPE rlgrap-filename OBLIGATORY.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
PERFORM get_f4.
START-OF-SELECTION.
PERFORM upload_data.
END-OF-SELECTION.
LOOP AT it_xk01.
    IF it_xk01-f1 = 'H'.
      PERFORM bdc_dynpro      USING 'SAPMF02K' '0100'.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                    'RF02K-KTOKK'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '/00'.
      PERFORM bdc_field       USING 'RF02K-KTOKK'
                                    it_xk01-f2.
    ENDIF.
    IF it_xk01-f1 = 'N'.
      PERFORM bdc_dynpro      USING 'SAPMF02K' '0110'.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                    'LFA1-PSTLZ'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '=VW'.
      PERFORM bdc_field       USING 'LFA1-ANRED'
                                    'Mr'.
      PERFORM bdc_field       USING 'LFA1-NAME1'
                                    it_xk01-f2.
      PERFORM bdc_field       USING 'LFA1-SORTL'
                                    it_xk01-f3.
      PERFORM bdc_field       USING 'LFA1-PSTLZ'
                                    it_xk01-f4.
      PERFORM bdc_field       USING 'LFA1-LAND1'
                                    it_xk01-f5.
      PERFORM bdc_dynpro      USING 'SAPMF02K' '0120'.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                    'LFA1-KUNNR'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '=VW'.
    ENDIF.
    IF it_xk01-f1 = 'I'.
      v_count = v_count + 1.
      IF v_count le 5.
      CONCATENATE 'LFBK-KOINH(' v_count ')' INTO v_koinh.
      CONCATENATE 'LFBK-BANKS(' v_count ')' INTO v_banks.
      CONCATENATE 'LFBK-BANKN(' v_count ')' INTO v_bankn.
      CONCATENATE 'LFBK-BANKL(' v_count ')' INTO v_bankl.
      CONDENSE v_koinh NO-GAPS.
      CONDENSE v_banks NO-GAPS.
      CONDENSE v_bankl NO-GAPS.
      CONDENSE v_bankn NO-GAPS.
      PERFORM bdc_dynpro      USING 'SAPMF02K' '0130'.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                     v_koinh.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '/00'.
      PERFORM bdc_field       USING v_banks
                                    it_xk01-f2.
      PERFORM bdc_field       USING v_bankl
                                    it_xk01-f3.
      PERFORM bdc_field       USING v_bankn
                                    it_xk01-f4.
      PERFORM bdc_field       USING v_koinh
                                    it_xk01-f5.
      else.
      PERFORM bdc_dynpro      USING 'SAPMF02K' '0130'.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                     v_koinh.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '=P+'.
      v_count = 1.
      PERFORM bdc_dynpro      USING 'SAPMF02K' '0130'.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                     v_koinh.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '/00'.
      CONCATENATE 'LFBK-KOINH(' v_count ')' INTO v_koinh.
      CONCATENATE 'LFBK-BANKS(' v_count ')' INTO v_banks.
      CONCATENATE 'LFBK-BANKN(' v_count ')' INTO v_bankn.
      CONCATENATE 'LFBK-BANKL(' v_count ')' INTO v_bankl.
      CONDENSE v_koinh NO-GAPS.
      CONDENSE v_banks NO-GAPS.
      CONDENSE v_bankl NO-GAPS.
      CONDENSE v_bankn NO-GAPS.
      PERFORM bdc_field       USING v_banks
                                    it_xk01-f2.
      PERFORM bdc_field       USING v_bankl
                                    it_xk01-f3.
      PERFORM bdc_field       USING v_bankn
                                    it_xk01-f4.
      PERFORM bdc_field       USING v_koinh
                                    it_xk01-f5.
      ENDIF.
    ENDIF.
    CLEAR it_xk01.
ENDLOOP.
PERFORM bdc_dynpro      USING 'SAPMF02K' '0130'.
PERFORM bdc_field       USING 'BDC_CURSOR'
                                     v_koinh.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '/00'.
perform bdc_dynpro      using 'SAPLSPO1' '0300'.
perform bdc_field       using 'BDC_OKCODE'
                                '=YES'.
wa_ctuparams-DISMODE = 'A'.
wa_ctuparams-UPDMODE = 'S'.
wa_ctuparams-DEFSIZE = 'X'.
CALL TRANSACTION 'XK01' USING it_bdcdata MODE 'A'
                                             UPDATE 'S'.
options from wa_ctuparams.
MODE 'A'
                                            UPDATE 'S'.
*&      Form upload_data
      text
FORM upload_data .
DATA: lv_infile TYPE string.
lv_infile = p_file.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename            = lv_infile
      filetype            = 'ASC'
      has_field_separator = 'X'
    TABLES
      data_tab            = it_xk01.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " upload_data
*&      Form get_f4
      text
FORM get_f4 .
CALL FUNCTION 'F4_FILENAME'
   EXPORTING
     program_name        = syst-cprog
     dynpro_number       = syst-dynnr
    FIELD_NAME          = ' '
   IMPORTING
     file_name           = p_file.
ENDFORM.                                                    " get_f4
       Start new screen                                              *
FORM bdc_dynpro USING program dynpro.
CLEAR it_bdcdata.
it_bdcdata-program = program.
it_bdcdata-dynpro   = dynpro.
it_bdcdata-dynbegin = 'X'.
APPEND it_bdcdata.
ENDFORM.                    "BDC_DYNPRO
       Insert field                                                  *
FORM bdc_field USING fnam fval.
IF FVAL <> NODATA.
CLEAR it_bdcdata.
it_bdcdata-fnam = fnam.
it_bdcdata-fval = fval.
APPEND it_bdcdata.
ENDIF.
ENDFORM.                    "BDC_FIELD
*H     0302
*N     sdng     dddsj     500020     IN
*I     IN     ICICI     734897597     xyz
*I     IN     SBH     768346687     abc
*I     IN     SBI     345687346     fgh
*I     IN     SBH     763846878     ujhgf
*I     IN     HSBC     797893778     fvdg
*I     IN     HDFC     723678638     fdgf
*I     IN     4444     435645646     fgfg
*I     IN     3400     763468768     gfgfg

How do I share iTunes with multiple users on Mac mini?

How do I share iTunes with multiple users on Mac mini?

You have to turn on Sharing and then Authenticate Sharing on the other devices. You can have up to 5.

I need your expert opinion on how to create a map with multiple conditions.

Hello.
I need your expert opinion on how to create a map with multiple conditions.
I have a procedure (which i cannot import or re-create in OWB due to the bug), so i am trying to create a map instead :-(
How can i create a cursors within the map?
My function creates table and cursor.
Then it will have to check for duplicates in the tables (the one created and another table) - the criteria for finding duplicates is a number of fields.I then need to place few different conditions (if some attributes are not available) and it has to load cursor based on this conditions. The next step is to fetch the data into the cursor based on what attributes are missing.
The next thing it will do is insert the data into table (if record doesn't exist), output the error in separate table is record is corrupted, or update the record with changed information.
In short i need to re-create match / merge but with conditions, iterations etc 'built into' it.
I can read up on available functions - it's just what would be the best options? and what would be the best approach to do so?
In my function i use %rowtype - but cannot use it in owb - so what would be the alternative? i don't really want to create a lot of variables and then have a nightmare of maintaing it. are there any tips regarding this?
having looked through Oracle dedupe - it's not really what i need because it is just DISTINCT.
I would appreciate any help / advise on this.
Thank you very much

thanks a lot for your reply - i will look into this option :-)
it is a bit more complicated now as i have to re-create the match / merge and then somehow 'tweak' it to achieve the result i need.
At the moment i am looking to breakdown the package into smaller chunks 'functions' and try creating the map that way.
Anyway, thank you very much for your suggestion.

How to design a form with multiple lang(Arabic and Eng) in a page

Hi All,
Could you pls help me how to design a form with multiple languages. when I set the form proprties-->Form Locale as Arabic. English text is comming in reverse and when set the FormLocale as English, Arabic text is comming in revese.
Pls help me how to design
Thanks in advance.
Regards,
Jayakar

I am not sure how you can have two different languages inside the same PDF.
Alternatively, if you want to place only the static labels, you can convert all the static label in one language to images and set the form language setting to other. And place the images inside the form using Image field. For example, you can keep the form language as English and then convert all the arabic language labels/ Static text to images.
Anotherway,
Have same sections in both the languages and hide and unhide based on the user selection of the language..
if your user chooses Arabic, then you can unhide the Arabic sections and change the form language properties programmatically..
Thanks
Srini

How to design a form with multiple lang(Arabic and Eng) in a pge

Hi All,
Could you pls help me how to design a form with multiple languages. when I set the form proprties-->Form Locale as Arabic. English text is comming in reverse and when set the FormLocale as English, Arabic text is comming in revese.
Pls help me how to design
Thanks in advance.
Regards,
Jayakar

I am not sure how you can have two different languages inside the same PDF.
Alternatively, if you want to place only the static labels, you can convert all the static label in one language to images and set the form language setting to other. And place the images inside the form using Image field. For example, you can keep the form language as English and then convert all the arabic language labels/ Static text to images.
Anotherway,
Have same sections in both the languages and hide and unhide based on the user selection of the language..
if your user chooses Arabic, then you can unhide the Arabic sections and change the form language properties programmatically..
Thanks
Srini

How to write a applet with multiple menu

Hi all,
How to write a applet with multiple menu or please tell me where can I get a examples
thanks

i'm writing a project and it seem not work with browser. If anyone can help please leave me a e-mail so that i can send my source to you.
Thanks so much

How to assign function module with process code in IDOC ?

how to assign function module with process code in IDOC ? and what code i have to write in that function module for custom IDOC ?
helpful answer will be rewarded?

Hi,
First goto transaction we42 -->editing mode --> new entries -->give name of your process code and description --> processing with alv service and function module -->then press enter -->after that enter the name of the function module you want to associate from the drop down and save it.
Thats the way to assign function module with process code.
In that process code we will have the Function modules and Bapi's which will take the data which we are sending through IDOC and then process it.
for example: i am triggering the IDOC for every purchase order created then this process code in the receiver system will take the data which i have enetered in the sender system to create the purchase order and process it and creates the same purchase order in the receiver's system.
Reward if helpful.
with regards,
Syed

How does create a server with multiple Clients ?

Any people can lead me .
How does create a server with multiple Clients ?
Thanks

For a multithreaded server you will need a thread to listen and at least one thread per client. If the conversation is half duplex, one thread per client works very well, if it's full duplex you will find one thread to send and one to receive much easier to program.
I posted a Simple Socket Server that uses 1+2*clients threads.

DFF with Multiple Codes (contexts) and Segments

I have made a DFF with multiple Codes just like the reference field in Oracle Order Management. Each code consists of multiple segments. I want to enter data in all the code and in all segments.
The problem is, i select first code and enter data in its segments and save it. After that i select another code (context) from the lov and enter data in its segments. Now when i re-open the first code (context) in which i have entered the data there is nothing.
What should i do??
Note: I can also provide you guys with screen shots and any other file that you want.

Thanks for your reply. Are you sure this is the only possibility as this is a very crucial requirement by our client and we need it to work our way. Can it be made possible through personalization??
Regards,
Mohammad Daniyal Khurshidi

How to restore iPhone 3gs with error code 1015 ??

How to restore iPhone 3gs with error code 1015 ??

The only advice we can give is to try and put it into DFU mode and restore. If that doesn't fix it, buy a new phone.
There is a reason that Jailbreaking isn't supported. You have just been kicked in the donkey by it.

How to find a control with code

I could find the control with the Test Builder, but now, what I want is achieve that by code. How could I define what the property
to search? Any help would be appreciated.

Hi mokpoju,
Generally, I know that if we want to find a control by code, we will need to add the searchproperties or filterproperties to find this control in the UIMap.Designer.cs file.
For example, you could use this searchproperties or filterproperties to find the control's ID, Name properties etc.
For more information, please refer this following blog to check your issue.
http://blogs.msdn.com/b/balagans/archive/2009/12/28/9941582.aspx
http://blogs.msdn.com/b/mathew_aniyan/archive/2009/02/12/hand-coding-a-coded-ui-test.aspx
Hope it help you!
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to create list items with multiple attachment files using rest api javascript

In one of user form I am using javascript rest api to create a list item with multiple attachment files. So far I am able to create list item and once created uploading an attachment file. But this is two step process first create an item and then upload
a file.
It create an additional version of the item which is not desired. Also I am not able find a way to attach multiple files in a go. Following is the code I am using.
createitem.executeAsync({
url: "/_api/web/lists/GetByTitle('UserForm')/items(1)/AttachmentFiles/add(FileName='" + aFile.name + "')",
method: "POST",
contentType: "application/json;odata=verbose",
headers: {
"Accept": "application/json;odata=verbose",
"X-RequestDigest": $("#__REQUESTDIGEST").val()
binaryStringRequestBody: true,
body: fileContent,
success: fnsuccess,
error: fnerror
So somehow I need to combine item attributes along with attachment files in body: param. I visited https://msdn.microsoft.com/en-us/library/office/dn531433.aspx#bk_ListItem but no success.
Appreciate any help.

Thanks Mahesh for the reply and post you share it was useful.
But this does not solve the core of the issue. You are uploading attachments after creation of item and multiple files are being attached in loop. This is kind of iterative update to an existing item with attachments. This will end up creating multiple versions.
What I am trying to achieve is to create an item along with multiple attachments in a go. No item updates further to attach a file.
Please suggest how this can be done in one go. SharePoint does it when one creates an item with multiple attachment.
Thanks for your reply.

How to create a table with multiple select on???

Hi all,
I am new to webdynpro and my requirement is to create a table with multiple selection on.I have to add abt 10 rows in the table but only 5 rows should be visible and moreover a verticalscroll should be available to view other rows.Can anybody explain me in detail how to do that.Please reply as if you are explaining to a newcomer.Reply ASAP as i have to do it today.
Thanxs

Hi,
1. Create a value node in your context name Table and set its cardinality to 0:n
2. Create 2 value attributes within the Table node name value1 and value2
3. Goto Outline view> Right click on TransparentUIContainer>Apply Template> Select Table>mark the node Table and it's attributes.
you have created a table and binded its value to context
Table UI properties
4.Set Selection Mode to Multi
5.Set Visible Row Count to 5
6.ScrollableColCount to 5
In your implemetaion, you can add values to table as follow:
IPrivate<viewname>.ITableElement ele = wdContext.nodeTable().createTableElement();
ele.setValue1(<value>);
ele.setValue2(<value>);
wdContext.nodeTable().addElement(ele);
The above code will allow you to add elements to your table node.
Regards,
Murtuza

How to create a dashboard with multiple prompts ?????

Dear All,
I need to design a dashboard with multiple prompts, which has been desined from webi.
Ex: i have a prompts of year,sales manager and promotions has prompts in webi report.
I am trying to create a dashboard on top of this webi report; i am also using live office.
how can i design this dashboard with mutiple prompts.
any doc's are links which is related to this topic will be a great help.
Thanks in advance.
Regards,
Suman

Dear Praveen,
Thanks for your suggestion; i hope we need some third party tool for multiple selection.
But i need to know which kind selectors i can use from the components for multiple selection.
question 1:
Ex:
I have prompt for year;
scenario 1: i need to filter the year by 2001,2002,2003.
or
scenario 2: need to filter the year by only one year 2001.
question 2:
I have created a dashboard on top of webi report; but i have filter for the year in from to value's.
Ex:
Year is from 2001 - 2009.
when i am enabling this prompt in xcelsius i cannot see from and to option; how should i design this one.
Regards,
Suman

How to relate ring control with multiple codes

Similar Messages

Maybe you are looking for