How to remove a Attachment in Module for Mail Adapter

Hi together,
we are trying to remove a Mail Attachment within a outgoing Mail with the help of a new Module executed by the Mailadapter. Since we are using the XI 3.0, we are trying to do that by this statements:
      Message msg = (Message)inputModuleData.getPrincipalData();
      Iterator it = msg.getAttachmentIterator();
      Payload payload;
      do
            payload = (Payload)it.next();
            if(payload.getName().equalsIgnoreCase("MailMessage"))
                  it.remove();
      }while(it.hasNext()); ...
The statement "it.remove" doesn't work.
Does anyone have an idea, how we can remove the attachment?
Thanks & Regards
    Thomas

I am sorry, the adapter module API does not support the removal of an attachment.
Regards
Stefan

Similar Messages

Modules for mail adapter

I want to remove attachments from the emails i send out of PI,
is there any modules for this purpose?
by default if i chck: msg protocol as XIALL i get entire messge as an attachment, even if i select XIPAYLOAD i get the payload as an attachment,
i only want to have the body and not the attachment.
Is there any adapter module readily available to remove attachments from emails?

i only want to have the body and not the attachment.
Choose these in your Receiver Mail Adapter:
Message Protocol :XIPAYLOAD
Check Use Mail Package
enter the appropriate URL
No need to check other options...
Using this you cannot enter From, To, Subject and other such fields in the channel....these should be configured in the mapping.....unless it is Parameterized mapping (applicable only to SAP PI7.1)
Regards,
Abhishek.

How to config Check Digits function module for Student Number Validation

Hi SLCM Experts,
In the SAP-SLCM, How to use check digits function module for validate student number. Just only config it or need to customizing program.
*Any idea to student number validation in SLCM?*
Best Regards,
Suvatchai K.

Hi ,
Can you expalin it further ?
You configure the St. no in piq_matr . And set it as external or internal no. range which suits your business .
What is the validation you are looking for ?
Regards
Gajalakshmi

How to remove cover page from hp3530 for all?

how to remove cover page from hp3530 for all?

Hi there Vari,
Can you give us a little more information to help out? Is this a 3530 Deskjet printer or the 3530c scanner? Is this cover page for a fax?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

How to add an attachment to an e-mail. With out it showing up and the end of a e-mail.

How to add an attachment to a e-mail. With out it showing up at the end of the e-mail.

https://discussions.apple.com/message/17397882#17397882
How can I prevent mail attachments embedding when sending mail
Note there are 14 pages of replies

I need this file "How to Use the Content Conversion Module in JMS Adapter"

Can someone send me this file:
"How to Use the Content Conversion Module in JMS Adapter"
I am not able to find it.
Thanks
Antonello

pls refer guide
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-adapters/how%20to%20use%20the%20content%20conversion%20module%20with%20xi%203.0%20j2ee%20jms%20adapter.pdf
Regards,
Swetha.

Since ios 6 update hotmail fetches or push on its own. I have hotmail set to manual. Best I can tell its only hotmail and not yahoo. Is this a known problem? How do I make hotmail stop checking for mail when I have it set to manual?

Since ios 6 update hotmail fetches or push on its own. I have hotmail set to manual. Best I can tell its only hotmail and not yahoo. Is this a known problem? How do I make hotmail stop checking for mail when I have it set to manual?

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Data type for mail adapter

HI
what type of data will come to mail ??
or
which type of data type we should you for Mail adapter ??
Regards
Kumar

Below link would address your doubts on mail adapters.
Mail Adapter

How to unconfigure a Custom Authentication Module for Convergence

After flailing with the incomplete instructions for [Writing a Custom Authentication Module for Convergence|http://wikis.sun.com/display/CommSuite/Writing+a+Custom+Authentication+Module+for+Convergence]
, I decided to try to revert back to the default.
How do you remove the module and go back to the default? I tried to unset the options, but they did not seem to take effect.
sudo /opt/sun/comms/iwc/sbin/iwcadmin -w xxxxx -o auth.custom.servicename -v ""
sudo /opt/sun/comms/iwc/sbin/iwcadmin -w xxxxx -o auth.custom.callbackhandler -v ""
sudo /opt/sun/comms/iwc/sbin/iwcadmin -w xxxxx -o auth.custom.loginimpl -v ""
sudo /opt/SUNWappserver/bin/asadmin stop-appserv
sudo /opt/SUNWappserver/bin/asadmin start-appserv
AUTH: DEBUG from com.sun.comms.client.web.sso.SSOFilter Thread httpSSLWorkerThread-80-1 at 14:45:25,951 - SSO is disabled
AUTH: WARN from com.sun.comms.client.protocol.delegate.agent.LoginContextAgent Thread httpSSLWorkerThread-80-1 at 14:45:25,953 - Subject not found in session, creating one
AUTH: ERROR from com.sun.comms.client.protocol.delegate.agent.LoginContextAgent Thread httpSSLWorkerThread-80-1 at 14:45:25,954 - Unabled to load the class due to
AUTH: ERROR from com.sun.comms.client.protocol.delegate.agent.LoginContextAgent Thread httpSSLWorkerThread-80-1 at 14:45:25,956 - Unable to instantiate callback handler
AUTH: ERROR from com.sun.comms.client.protocol.delegate.LoginCommandDelegate Thread httpSSLWorkerThread-80-1 at 14:45:25,957 - Failed to Login the user: Unable to instantiate callback handler
PROTOCOL: ERROR from com.sun.comms.client.protocol.delegate.LoginCommandDelegate Thread httpSSLWorkerThread-80-1 at 14:45:25,960 - Protocol Error while login : Unknown Reason

jessethompson wrote:
After flailing with the incomplete instructions for [Writing a Custom Authentication Module for Convergence|http://wikis.sun.com/display/CommSuite/Writing+a+Custom+Authentication+Module+for+Convergence]
, I decided to try to revert back to the default.
How do you remove the module and go back to the default? I tried to unset the options, but they did not seem to take effect.After enabling the custom login module using the steps in the earlier thread (http://forums.sun.com/thread.jspa?threadID=5318615), I performed the following steps to disable the custom module and re-enable the ldap auth module:
# Disable custom auth-module
cd /opt/sun/comms/iwc/sbin
./iwcadmin -w <admin password> -o auth.custom.servicename -v ""
./iwcadmin -w <admin password> -o auth.custom.loginimpl -v ""
./iwcadmin -w <admin password> -o auth.custom.callbackhandler -v ""
./iwcadmin -w <admin password> -o auth.misc.CredentialFile -v ""# Re-enable the LDAP auth-module
cd /opt/sun/comms/iwc/sbin
./iwcadmin -w <admin password> -o auth.ldap.callbackhandler -v com.sun.comms.client.security.auth.AppCallbackHandler
./iwcadmin -w <admin password> -o auth.ldap.loginimpl -v com.sun.comms.client.security.auth.modules.impl.SunLDAPLoginModule# Restarte App Server
cd /opt/SUNWappserver/bin/
./asadmin stop-domain; ./asadmin start-domain# Login to iwc interface as user shjorth with password oldpwd
# Login successful with oldpwd -- custom auth module successfully disabled, LDAP re-enabled
Regards,
Shane.

How to create the INBOUND Function Module for INBOUND IDOCs

Hi Friends,
Can any Suggest me How to proceed to Create an INBOUND Function Module for Processing the INBOUND IDOCS
which are recieved from XI Server ?
I am working in SAP-ISU
Here i will recieve the INBOUND IDOCs for the Meter Reading Orders.
We have a Standard INBOUND FUNCTION MODULE
IDOC_INPUT_ISU_MR_UPLOAD
which Uploads the Meter Reading Results.
I copied the Same function Module into ZIDOC_INPUT_
and working on it.
Can any one suggest me, whether i am going in correct way or not.
In IDOC_INPUT_ISU_MR_UPLOAD Inbound fun module,
BAPI_MTRREADDOC_UPLOAD is used to Update or Insert the Meter Reading Results,
My requirment is to Insert and Update the Meter Reading Orders which are Inbounded from XI.
Can I Use the Same BAPI
BAPI_MTRREADDOC_UPLOAD
to Update the below fields,
EABL-SERNR
EABL-ZWNUMMER
EABLG-ABLESGR
EABL-V_ZWSTAND
EABL-N_ZWSTAND
EABL-ABLHINW
EABL-ZSKIPC
EABL-ADAT
EABL-ATIMTATS
EABL-ADATTATS
EABL-ATIM
EABL-ZMESSAGE
EABL-ABLESER(Meter reader number)
Kindly Suggest me,
Thanks in Advance,
Ganesh

Hello Ganesh
I think you are going completely astray with you z-function module for IDoc processing.
If you look at TABLES parameter METERREADINGRESULTS (type BAPIEABLU ) of BAPI_MTRREADDOC_UPLOAD you will find many of the requested fields already:
EABL-SERNR => BAPIEABLU-SERIALNO
EABL-ZWNUMMER =>REGISTER
EABLG-ABLESGR
EABL-V_ZWSTAND
EABL-N_ZWSTAND
EABL-ABLHINW
EABL-ZSKIPC
EABL-ADAT
EABL-ATIMTATS => ACTUALMRTIME
EABL-ADATTATS => ACTUALMRDATE
EABL-ATIM
EABL-ZMESSAGE
EABL-ABLESER(Meter reader number)
Field EABL-ZMESSAGE appears to be custom field (at least I cannot find it on ECC 6.0). If this field was added using include CI_EABL then you probably can get these values into the BAPI using the EXTENSIONIN parameter.
Check routine CHECK_UPLOADRECORDS in the BAPI which allows two extension structures:
- BAPI_TE_EABL
- BAPI_TE_EOSB
Not surprisingly BAPI_TE_EABL contains the include CI_EABL.
Regards
Uwe

How to Removed VAT during DTW upload for Invoices and Credit Notes

Hi Experts
Please help.
Every time I import AR Invoice and Ar credit Notes there is an automatic posting to VAT even if the template has the same price after VAT and zero discount.
How to removed this?
Regards,
Sandra

Hi Julie
As requested. The SO is VAT code for nonvat or zero vat
As requested
Header
RecordKey     DocEntry     CardCode     CardName     Comments     DiscountPercent     DocCurrency     DocDate     DocDueDate     DocNum     DocRate     DocTime      DocTotal      DocType     JournalMemo     NumAtCard     Reference1     Reference2     Series     TaxDate
1     TRUE     MC002 A     ABENSON INC.                    20090930     20060428          1           13,950.0000      dDocument_Service      OB AR Invoices 09.30.09     SI#044792          SI#044792          20060227
Lines/Details
RecordKey     LineNum     AccountCode      LineTotal      VatGroup
RecordKey     LineNum     AccountCode      LineTotal      VatGroup
1          392000000     13,950.00      SO
Regards,
Amy

In LV, using TS API, how do I specify the VI module for a Pass/Fail step?

I am writing a LabView VI which will let a user write a TestStand sequence. Each step in the seq is the same type, a Pass/Fail test. I need to specify for each step the LabView VI module location, and an input buffer. I am having difficulty finding out how to specify the module for the step using the TestStand API in LabView. How to do this????

Hi Drew,
I think Dennis might have come at this from the wrong angle.
Have a look at the example that ships with TestStand under
\Examples\SequenceBuilderTool\LabVIEW
This might give some clues, but I'd suggest posting this question over to the TestStand discussion Forum as suggested by Dennis.
There'll be a few more people there who can help a bit more in-depth
My personal suggestion is to create a custom step type that calls the .vi's and then you can create the steps in a new sequence file using your tool easily. This could be cumbersome for you if you already have a lot of steps setup.
Better then to create a resource to get the steps out of to clone them by creating a sequence file which is full of your steps. When you have a handl
e to a cloned step, you can change properties about it in memory, before putting it into the sequence (i.e. change it's name and stuff)
Otherwise you need to get the type and create a new step of this type.
If all you're stugling with is the module to call, then for the step you have a handle to, change the
you can either change the "Step.TS.SData.ViPath" as a string (TestStand set property value String with a reference to the sequence_context) or if you wanted to bring up the specify module dialog, if you have a handle to the step itself, call the method SpecifyModule.
Hope that helps
Sacha.
// it takes almost no time to rate an answer

How to Remove 'Powered by Oracle' Image for specific Dashboard

Hi,
How to remove 'Powered by Oracle' from dashboard, if so is itpossible to hide for specific dashboard.
Thanks,
Malli.

Hi,
The below code can be used to hide the Powered by Oracle logo in a specific dashboard.
<script language="javascript">
window.onload=hideImg;
function hideImg(){
var all = document.getElementsByTagName("img");
for (var i=0, max=all.length; i < max; i++) {
     var imgName = all.getAttribute("src");
     if(imgName.substring(imgName.lastIndexOf("/")+1) == "siebelbug.gif"){
          all[i].style.visibility='hidden';
</script>
Open the dashboard, place a text object on it, open properties and copy/paste the above code as is. Check the option 'Contains HTML Markup'. Basically the above code searches for the image 'siebelbug.gif' (Powered by Oracle logo) and hides it as soon as the page is loaded. I have tested this in 10.1.3.4 version.
Hope it helps!!
Thanks

How to create a module for File Adapter

Hi,
I read somethings about module in Adapters.
What I need to create a EJB? I need to generate a jar? Where I put it?
Do they have anything about this or a step by step? I want to create a module fpr File Adapter
Tks.

Hi,
   >>>What I need to create a EJB?
       If you have NDS or Ecclipse you can create them automatically.
   >>>I need to generate a jar?
      Yes you need to generate a .Jar for that Ejb.
   >>>Where I put it?
      Put that .Jar in .Ear file. and then deploy it on to the Xi server or PCK or Decentralised Adapter Engine where ever u want to use.
   >>>Do they have anything about this or a step by step?
      Yes.Step by step procedure for creating module is available.You can get them at the links given above by others.
Regards,
Gowtham K.

Dynamic attachment name in receiver mail adapter for 1 attachment?

Hi,
seems to be a tricky thing....
The sender interface (file) picks up an xml file and a pdf document.
The receiver wants to get the xml file as a txt file and the pdf, both sent together by mail.
We are following this thread:
"Sending multiple attachments winthin a single Receiver Mail adapter in required format".
So far we are able to generate the txt file and send it together with the pdf to the recipient.
The txt file gets its name from the payload of the xml file.
Unfortunately the pdf should be renamed to the same name as the txt file.
And here we are stuck.
We generate the filename for the txt file in the mapping to the mail message (as usual ximail30.xsd).
But for the pdf we are only able to set a static name in the channel module page using
Transform.ContentDisposition.
Any ideas how to solve this are really welcome!!!!
(Solutions that do not talk about using a new module to be written are prefered.)
Regards
Dirk

Hi,
seems to be a tricky thing....
The sender interface (file) picks up an xml file and a pdf document.
The receiver wants to get the xml file as a txt file and the pdf, both sent together by mail.
We are following this thread:
"Sending multiple attachments winthin a single Receiver Mail adapter in required format".
So far we are able to generate the txt file and send it together with the pdf to the recipient.
The txt file gets its name from the payload of the xml file.
Unfortunately the pdf should be renamed to the same name as the txt file.
And here we are stuck.
We generate the filename for the txt file in the mapping to the mail message (as usual ximail30.xsd).
But for the pdf we are only able to set a static name in the channel module page using
Transform.ContentDisposition.
Any ideas how to solve this are really welcome!!!!
(Solutions that do not talk about using a new module to be written are prefered.)
Regards
Dirk

How to remove a Attachment in Module for Mail Adapter

Similar Messages

Maybe you are looking for