How to remove Cross Marks in the Report Column.of Cell..!!

Hi Experts,
I am facing an issue. I have included a Formula in the Cell at Query Level.
When i run the report in the Bex Analyzer.
for that Formula column in the report there is some Cross Marks with Red Colour is displaying.
But the Formula is added in the Cell area at Query designer level.
Here user requirement is if there is no values calculated in the Formula column there should be no values has to be displayed.
But unfortunately, here i am getting Cross Marks or Mulitply Symbol is displaying.
My Question is Pls advice, How to remove those Red Cross Marks in the report of that Column.
Thanks,
SN.

Hi,
Whenever there is no value, by default, and SAP standard, it shows X mark.
At reporting level you cannot do changes, as this change has to be done at global level. Hence make sure that if this has to be changes this will affect other reports too.
If you still feel that X mark has to be displayed as blank, then you can do this in SPRO settings.
SPRO->Display IMG->SAP Netweaver->Business Intelligence->Settings for Reporting and Analysis->and execute Presenting the numeric value in the Bex.
Change the value:
Does not exist : Remove X.
Hope this solves your issue.
Regards
Jeeth

Similar Messages

How to call a package from the Report in Oracle Application Express

How to call a package from the Report in Oracle Application Express

Hello,
What do you mean? Something like SELECT mypackage.function( par1, par2) from dual?
Or do you want to execute a procedure when something happens on the page, like clicking a button?
Greetings,
Roel
http://roelhartman.blogspot.com/
You can reward this reply by marking it as either Helpful or Correct ;-)

How to remove links pointing to the same page?

I have PDF documents with Links which point to sections referenced (e.g. link of text "Section 2.2" points to the actual page number of "Section 2.2"), but as the links are created from cross-references during rendition from Word to PDF, there are cases that the destination page number and source page number of the links are the same (e.g. links of text "Section 2.2" on page 9 are created with the destination of page 9 which is the actual page number of "Section 2.2"), I want to remove all these links, but I don't know how to get the destination page, I check the API reference and find that "PDLinkAnnotGetAction" may work , but I don't know how to use it, could you check me codes below and advise ? Your help is really appreciated!
PDPage page;
ASInt32 i,i2;
AVDoc avDoc = AVAppGetActiveDoc();
PDDoc pdDoc = AVDocGetPDDoc (avDoc);
int pageNum = PDDocGetNumPages(pdDoc);
for (i = pageNum - 1; i >= 0; i--)
page = PDDocAcquirePage(pdDoc, i);
int annotNum = PDPageGetNumAnnots(page);
for (i2 = annotNum - 1; i2 >= 0; i2--)
if...
PDPageRemoveAnnot(i, i2);
My Product Information:
Acrobat Pro 8.1.6, Windows

Start by reading the PDF standard (ISO 32000-1) to understand Actions vs. Destinations.
Then for each annot, you'll want to see which it has (and in the case of an Action, if it has more than one). Then you need to parse the action or dest to see what it is and where it goes. If you don't like it, then you'll delete it.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Tue, 25 Oct 2011 09:25:32 -0700
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: How to remove links pointing to the same page?
How to remove links pointing to the same page?
created by OALD<http://forums.adobe.com/people/OALD> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/3989576#3989576

How to remove unused objects from the webcatalog In OBIEE11g

Hi,
I want to delete unused objects from obiee11g catalog, i know in obiee10g it's working fine (i.e: we can do it via manage catalog then delete the unused objects) is there any way to do it automatically like RPD utility --->removing unused objects from Physical layer in RPD
fyi: I don't want to delete manualy. i need somethink like button/link to find unused objects(report,filter,folder..etc) from my obiee11g catalog.
Thanks
Deva
Edited by: Devarasu on Nov 29, 2011 12:06 PM
Edited by: Devarasu on Nov 29, 2011 3:15 PM

Hi,
Checked with Oracle Support team and confirmed below points
--> incorporated into the Current product and consider as BUG it may resolve future release
--> Currently there isnt any automatic method to remove the unused objects like reports, filters,folder etc from catalog.
Treated as Bug
Bug 13440888 - AUTOMATICALLY REMOVE OF UNUSED CATALOG OBJECTS FROM WEBCATALOG
FYI:
SR 3-4984291131: How to remove unused objects from the webcatalog in obiee11g
Thanks
Deva

How to integrate conditional colors to the Report



Hi user487406,
What about a select like this:
select i.id,
 i.task_id,
 case i.severity
 when 1 then '' || i.severity || ''
 else
 to_char(i.severity)
 end severity,
 i.priority,
 i.task,
 p.project_name
from ideas i,
 project_lookup p
where p.project_id = i.project_id;
And PL/SQL like this:
q :=
' select i.id, ' ||
' i.task_id, ' ||
' case i.severity ' ||
' when 1 then '''' || i.severity || '''' ' ||
' else ' ||
' to_char(i.severity) ' ||
' end severity, ' ||
' i.priority, ' ||
' i.task, ' ||
' p.project_name ' ||
' from ideas i, ' ||
' project_lookup p ' ||
' where p.project_id = i.project_id; '; Regards Pete

How to remove available downloads from the list

how to remove available downloads from the list without it resuming when i open itunes or check for available downloads?

There is not a way to remove them from the list. Just let them download, and then delete them from your library when they are done.

How to Print the Report Column headers on each page of any report

Can someone offer assistance on how I can go about achieving the ability to show and print the Report Column headers on each page of any report using the Print Attributes of APEX 3.0? These reports will be printed using Excel and Word.
I read a thread with a similar request but the answer seems vague for my level of understanding.
I am connected to a print server and using BI Publisher.
Thanks,
Ric

Hello Ric,
>> These reports will be printed using Excel and Word.
I'm not sure I understand what you are trying to do. You are using a very powerful tool – BI Publisher – why do you need Excel or Word for printing? Is there a special need only Excel or Word can provide?
One of the major advantages of using BI Publisher is that it's taking care of all these tedious tasks like reasonable page breaking, headers and footers, and also table headers.
Regards,
Arie.

How to remove SD Card from the Card Reader slot - Satellite A100?

Hi,
Is there anyone to help me? I inserted a 64 MB SD card in the card reader slot of my Toshiba A100 model. It's the first time i have inserted the card. The card is inside the slot. I can not take it out! I don't have any idea how to remove the card from the card reader slot. I can see the contents of my SD card, can open the files too. But how to remove it out from the slot. Please help me giving your idea to remove the card out from the slot.
Arjun

Hi
In my knowledge the SD card slot doesnt has a any additional helps like the PCMCIA slot to remove the card.
You have to remove it simply. Try to grab the card and move it out. You can try to use the pair of tweezers. Maybe it helps

How to remove esclamation mark from itunes

how to remove esclamation mark from itunes???

See these...
-> One computer using multiple iTunes Store authorizations
-> About iTunes Store authorization and deauthorization

How to display 0INSP_CHAR description in the report?

Hi experts
I want to display description of 0INSP_CHAR in the report..
0INSP_CHAR has 3 compounding objects so its displaying it as Q/1356933/11/20 instead of 20.
I want to remove compound characteristics from the report & also want to display description of 20 in the report which is maintained in the master data..
Please suggest inputs.
Thanks & Regards
Swati

Hi,
Please check the reponse in the other post.
-Vikram

How to remove "all day" as the default setting in iCal?

How to remove "all day" as the default setting in iCal? The iCloud calendar works by double-clicking but the local behaves differently.

Hello Valerie,
the default - "all day" or "time based" - depends on the view in iCal. In month view the default is "all day",
in week view or day view it is a time interval, if you use "File -> New Event". If you add the event by double clicking into the calendar, it will depend on the section you are clicking - in the all day section you will add an all-day event, in the time-grid you will enter an event with start-end time.
Regards
Léonie

How to remove blank spaces in the source code of my page?

I created a page with the following code for testing:
<dsp:page>
<dsp:importbean bean="/atg/commerce/catalog/ProductLookup"/>
 <dsp:droplet name="ProductLookup">
 <dsp:param name="id" value="xprod2046" />
 <dsp:param name="elementName" value="product" />
 <dsp:oparam name="output">
 <dsp:valueof param="product.DisplayName"/>
 </dsp:oparam>
 </dsp:droplet>
</dsp:page>
It only shows the product name in the browser. But if I look at the source code of my page he created 61 lines in response to this code, where a line is the product name and the other 60 have nothing.
I know how to remove these lines that the ATG creates no content because my project is full of these empty lines.
Anyone ever had this problem and could help me?
Thanks

Hi ,
Yup this is a problem ,
you can use following ways :
1- use jsp comments eg :
<dsp:page>
<dsp:importbean bean="/atg/commerce/catalog/ProductLookup"/><%--
 ----%><dsp:droplet name="ProductLookup"><%--
 ----%><dsp:param name="id" value="xprod2046" /><%--
 ----%><dsp:param name="elementName" value="product" /><%--
 ----%><dsp:oparam name="output"><%--
 ----%><dsp:valueof param="product.DisplayName"/><%--
 ----%></dsp:oparam><%--
 ----%></dsp:droplet><%--
----%></dsp:page>
2- End tags at next line :
e g :
* <dsp:page
* ><dsp:droplet name=”xyz”
* ><dsp:oparam name=”output”
* >Name: <dsp:valueof param=”abc”
* /></dsp:oparam
* ></dsp:droplet
* ></dsp:page>
3- Always use TAB instead of using SPACEBAR whie writing source code.
4 - From JSP 2.1 onwards we have a page directive trimwhitespaces ( see if that works , i was not able to ), google for it for more info
5 - You can modify your build scripts to remove white spaces from jsps while building EAR.(complex though, as you may not want to trim all white space.)
6 - modifying the deployment descriptor.
<init-param>
<param-name>trimSpaces</param-name>
<param-value>true</param-value>
</init-param>

HT2500 Does anyone know how to remove a group from the address panel in mail?

Does anyone know how to remove a group from the address panel in mail?

I haven't seen too many questions like this on this forum. Did you also try the photoshop forums?

Examples of chart in the report column like monitor activity page

Hello,
Can anybody help me how to create a report having chart as one of the column in the report like Administration->Monitory Activity pages.
I have a report having columns like date, salesman, collection%.
The collection% must be displayed as bar chart showing % in the report column itself.
I searched a lot and end up with no examples found for this kind of example.
Any help will be appreciated.
Thanks,

First of all, it appears that there is no "HTML EXPRESSION" or an area to assign a CSS class to a column for interactive reports. I've even tried to use "COMPUTE" on an interactive report to introduce the <DIV> tabs and style, but that doesn't seem to work either. So If you're using an interactive report, it looks like you're out of luck.
But if you use a standard report, here is a quick example using the standard Demo tables on an interactive report. I'll do my best to describe what I'm doing step by step.
The query I'm using is a simple list of employees that shows the following columns:
<ul>
<li> EMPNO
<li> ENAME
<li> JOB
<li> SAL
<li> COMM
<li> COMM / (SAL + COMM) *100 (What percent of total Salary is the employees Commission)
</ul>
So here is the SQL statement I'm going to use:
select empno, ename, job, sal, comm, round(nvl((comm / (sal + comm) *100),0)) Pct_Comm
from empNow, Create an standard (SQL) report on the page of your choice by selecting the CREATE button at the top of the page editor. Select "REGION ON THIS PAGE" => "REPORT" => "SQL REPORT"
Enter a the TITLE and TEMPLATE of your choice, then click the NEXT button.
Copy and paste the select statement above into the page region for the select statement, and press the CREATE REGION button.
Go ahead and run the report and you will see a whole number for the COMM_PCT.
Now to turn this into a graph within the column perform the following steps.
<ol>
<li>Edit the page and then edit the report by clicking on the "Report" link on the page definition. This will bring up the Report Attributes Page.
<li>Edit the PCT_COMM column by clicking on the EDIT icon at the beginning of the row.
<li>Cut and paste the html from my above post into the "HTML EXPRESSION" field.
<li>Edit the HTML you just pasted to remove any unnecessary spaces in the tags that might cause it to render incorrectly.
<li>In the HTML EXPRESSION string, replace the #COLLECTION_PCT# string with #PCT_COMM#. (This is a substitution variable that represents the value of that column. We're using that to set the WIDTH attribute of the bar).
<li>Apply your changes and re-run the report.
</ol>
et. Voi la! You have a graph in your report.
Hope that was clear enough.
Doug

How to remove special characters while typing data in edit cell in datagrid in flex4

Hi Friends,
I am facing this problem "how to remove special characters while typing data in edit cell in datagrid in flex4".If know anyone please help in this
Thanks,
Anderson.

Removes any characters from
@myString that do not meet the
provided criteria.
CREATE FUNCTION dbo.GetCharacters(@myString varchar(500), @validChars varchar(100))
RETURNS varchar(500) AS
BEGIN
While @myString like '%[^' + @validChars + ']%'
Select @myString = replace(@myString,substring(@myString,patindex('%[^' + @validChars + ']%',@myString),1),'')
Return @myString
END
Go
Declare @testStr varchar(1000),
@i int
Set @i = 1
while @i < 255
Select
@TestStr = isnull(@TestStr,'') + isnull(char(@i),''),
@i = @i + 1
Select @TestStr
Select dbo.GetCharacters(@TestStr,'a-z')
Select dbo.GetCharacters(@TestStr,'0-9')
Select dbo.GetCharacters(@TestStr,'0-9a-z')
Select dbo.GetCharacters(@TestStr,'02468bferlki')
perfect soluction

How to remove Cross Marks in the Report Column.of Cell..!!

Similar Messages

Maybe you are looking for