HOW TO REMOVE SLIN ERROR?

Hi,
i declared internal table in the given form.
data begin of itab occurs 0.
include structure mara.
data end of itab.
when i check SLIN...it is showing warning as "Line contains a single period"
Thanks in Advance,
Venkat

Hi Venkat,
data : begin of itab occurs 0 ,
         include structure mara ,
         end of itab.
Check it now.
Better to declare internal table using Types instead of Data :
Like the below code.
TYPES : BEGIN OF T_MARA,
              INCLUDE STRUCTURE MARA,
              END OF T_MARA.
DATA : I_MARA TYPE STANDARD TABLE OF T_MARA.
Regards,
Suresh.S

Similar Messages

How to remove this error every time in extraction

Dear folks,,
I have a difficulties in extraction .. Could you share to me how to remove this error please .. ??
In one ODS: Quotation (Fetching the data from CRM), it always raise up the error every time do an extraction ..
The message error is like this:
Runtime Errors     :    MESSAGE_TYPE_X
Error analysis
Short text of error message:
Req. 0000508314 in DataStore ZCRMQUTO must have QM status green before it is activated
Another Clues:
SY-TITLE : CPIC and RFC Control
SY-MSGTY : X
SY-MSGID : RSM1
SY-MSGNO : 110
SY-MSGV1 : 0000508314
SY-MSGV2 : ZCRMQUTO
SY-MODNO : 0
SY-DATUM : 20080116
SY-UZEIT : 083744
SY-XPROG : SAPLRSSM
SY-XFORM : RSSM_MON_START_2ND_PROCESS
My Questions are :
1. Do you ever have the problem like this ??
2. Do you know the problem regarding CPIC & RFC Control, is that any correlation with RFC/Connection to CRM.
3. Do you know regarding the message error: RSSM_MON_START_2ND_PROCESS
Need really your guidance and response..
Regards,
Niel..
will appreciate any response ..

Hi,
Just try this.
As per the error message "Req. 0000508314 in DataStore ZCRMQUTO must have QM status green before it is activated" there is a request(0000508314) in red/yellow status in the ODS (ZCRMQUTO).
This error normally occurs while activation of ODS/DSO.
Activation may fail saying that there is a request with status other than green in target. Ideally system expects to activate a green request. But if it find a request with other (red/yellow) it may throw an error.
This is the error message we get for that kind of errors
'Request REQU_* in ODS must have QM status green before it is activated." and this is the same one you are getting.
Try to find the bad request, rectify/delete it.
This may resolve your problem.
thanks,
JituK

How to remove syntax error for the method which i deleted?

Hi,
I implemented a attribute NAME2 in BP_ADDR/AddressDuplicate , in that i implemented GET_P_NAME2 and later deleted attribute it self now i am getting the error "ZL_BP_ADDR_ADDRESSDUPLICA_CN02CP Method "GET_P_NAME2" does not exist. There is, however, a method with the similar name "GET_BP_NAME"
how to remove this error?
regards
Vinay

Hi Pankaj,
I tried that it is giving dump
The following syntax error occurred in program
"ZL_BP_ADDR_ADDRESSDUPLICA_CN02CP " in include
"ZL_BP_ADDR_ADDRESSDUPLICA_CN02CM01D " in
line 1:
"Method "GET_P_NAME2" does not exist. There is, however, a method with "
"the similar name "GET_BP_NAME"."
any clue how to solve this?
Vinay

To remove slin error(No Read Access)

Hi All,
When I do the extended programing check for my program its giving slin warning as No read access for that variable .How can i remove that error.
Thanks
Shruti

Hi Shruthi,
Use "#EC NEEDED at end of that statement, if you need it.
if you are not using that variable just remove from your code.
Reward if it helps,
Satish

How to remove Unicode errors from extended check and code inspector

Hi
We are working on making all our ABAP program to make unicode compliant. We are activating unicode flag in attribute and correcting syntax errors. After this when we do the extended checks or SLIN or code inspector, usually giving error for many statements such as whenever there is message.
<b>Code is :</b>message a208 with text-004.
<b>Error description is</b> :
The message 208 for id zz has no long text.
You can hide this message using "#EC *
208 is - & does not exist in & &. And text 004 is - Cannot open the output file
By using #EC * we can remove errors. But Is this the correct way and what does this indicate? Please explain.

Hi Yogesh,
Can you check whether the message number 208 in message id ZZ has the Self Explanatory checkbox as checked or not? I think it is not checked and u have also not maintained any long text. Hence the error.
By using #EC - you do not remove the error, however u hide it from SLIN.
It is used if there is some known error you cannot avoid which is returned by SLIN and you dont want it to be reported. Also, a way to "cheat" the reviewer who might be checking for errors.
Not good !!
Regards,
Aditya

How to remove build errors while creating an Order App. for Handhelds

Hi Friends,
As per the Tutorial: Developing an Order Application for Handhelds provided at the given link http://help.sap.com/saphelp_nwmobile71/helpdata/en/8F/0B674240449C60E10000000A1550B0/frameset.htm
I am creating mobile application for PDA . I have finished many steps but at one step I am getting build errors.
The step is when we create service and paste the code provided in the document.
public void generateTestData() {
//@@begin implementation
      if( !(((Order_srvModel)OcaRoot.getInstance().getModel(Order_srvModel.class)).getOrderOrderheaders().size() > 0))
         OrderOrderheader order = ((Order_srvModel)OcaRoot.getInstance().getModel(Order_srvModel.class)).createOrderOrderheader();
         order.setOrderid("0023378");
         order.setLongtext("Repair front door");
         order.setServiceunit("SU01");
         order.setCreatedOn(Date.valueOf("2007-06-30"));
         order.setCreatedAt(Time.valueOf("08:45:00"));
         order = ((Order_srvModel)OcaRoot.getInstance().getModel(Order_srvModel.class)).createOrderOrderheader();
         order.setOrderid("0024897");
         order.setLongtext("Analyse malfunction");
         order.setServiceunit("SU01");
         order.setCreatedOn(Date.valueOf("2007-07-01"));
         order.setCreatedAt(Time.valueOf("09:00:00"));
         order = ((Order_srvModel)OcaRoot.getInstance().getModel(Order_srvModel.class)).createOrderOrderheader();
         order.setOrderid("0034534");
         order.setLongtext("Repair escalator");
         order.setServiceunit("SU03");
         order.setCreatedOn(Date.valueOf("2007-07-03"));
         order.setCreatedAt(Time.valueOf("19:45:00"));
         order = ((Order_srvModel)OcaRoot.getInstance().getModel(Order_srvModel.class)).createOrderOrderheader();
         order.setOrderid("0024589");
         order.setLongtext("Analyse computer problem");
         order.setServiceunit("SU04");
         order.setCreatedOn(Date.valueOf("2007-07-01"));
         order.setCreatedAt(Time.valueOf("15:45:00"));
         order = ((Order_srvModel)OcaRoot.getInstance().getModel(Order_srvModel.class)).createOrderOrderheader();
         order.setOrderid("0027890");
         order.setLongtext("Repair door lock");
         order.setServiceunit("SU03");
         order.setCreatedOn(Date.valueOf("2007-07-05"));
         order.setCreatedAt(Time.valueOf("10:00:00"));
         OcaRoot.getInstance().commit();
//@@end
The issue is I am getting a red line below each set methods as I have shown by underlining. I am struggling with how to rectify the error.When I write ORDER and write . after it , it shows only get methods in the popup not the set methods.
Please suggest .
It will be a great help.
Regards,
Nitesh

Hi Nitesh
Check if the data object you created is bi directional in DOE?
Regards
Vidyadhar

How to remove Fatal Error in Reports 3.0

How to eliminate Fatal Error in the Reports,
I created Formula column and in that i am writing query for
retreiving values and storing that value in other variable which
i declared in the formula columns PL/SQL and in that I didn't
find any compilation errors but when i run the report i am
getting the fatal error. Please give me the solution for that
fatal error.

Hi ,
first goto the properties sheet of formula column.
in the properties sheet
increse the widht property by 200.
still u have the same problem again increase by 100.
repeat like that.
at certain level u r error fixed.
bye
srini

ORA-04031 . how to remove this error.

Hi Guys,
when i try to run one of my query based on a view, i get the following error:
ORA-04031: unable to allocate 4096 bytes of shared memory ("large pool","unknown object","sort
subheap","sort key")
I have no idea if this error is related to memory or what. Pliz help how to resolve this error and run my query.
Regards,
Imran Baig

[oracle@demo oracle]$ oerr ora 4031
04031, 00000, "unable to allocate %s bytes of shared memory (\"%s\",\"%s\",\"%s\",\"%s\")"
// *Cause: More shared memory is needed than was allocated in the shared
//          pool.
// *Action: If the shared pool is out of memory, either use the
//          dbms_shared_pool package to pin large packages,
//          reduce your use of shared memory, or increase the amount of
//          available shared memory by increasing the value of the
//          INIT.ORA parameters "shared_pool_reserved_size" and
//          "shared_pool_size".
//          If the large pool is out of memory, increase the INIT.ORA
//          parameter "large_pool_size".
[oracle@demo oracle]$

How to remove OSX error/fake space on HD.

So the only real problem I've had with OSX, is that sometimes if you quit a partitoning, in thise case I stopped a Boot Camp partioning, but this can also happen when deleting things like Virtual Machines. I did both today, and now I have around 100GB of air, that can not be removed. Basically Disk Utility and everything else says that there is over 100GB of "other" which is the virtual machine I deleted + the failed partion that disappeared and somehow went into my main partion. So I'm asking, cause this is the 1 issue I've had with OSX, and it's really annoying, cause this is like the 3rd time I'll have to reinstall everything.. Is there a way to fix this?

What?? What does that have to do with anything, and it's not my fault that there is no way provided to uninstall some things in OSX.

How to remove error 59 which occurred while using Send Email Using Smtp Client .VI in Labview 2013.

Hi,I am trying to run Send Email Using Smtp Client .VI in Labview 2013 examples ,but it gives error 59.Please can anyone suggest how to remove the error.The printscreen is attached below.
Solved!
Go to Solution.
Attachments:
error.docx ‏310 KB

Thanks for the help,but i have set the parameters right but still it does not work for me.Please suggest me reasons and how to correct them.
Attachments:
error.docx ‏270 KB

How to remove errors after running sapf190

Hi everyone
Can anyone please guide me what procedure do i have to follow if i found differences in one of the gls after running the report sapf190. The report shows me difference in one of the Gls with debit index, debit master not matching credit index and credit total master not matching. But the programme dont tells me how to remove this error. Your kind help will be really appreciated.
Regards

RESOLVED

How to troubleshoot SQL error when copying cube

I was successful in creating Info Package and running it to copy data frin cube 1 to cube2. However, I get an error when
Running the package. My source cube has 1.9 million rows. However, Info Package only loaded 30,120 records. Looking in monitor logs, it shows me following error stack:
System error in program SAPLRS_EXECPTION and from RS_EXEPTION_TO_MESSAGE
SQL Error 0
Unknown error in SQL Interface
Errors in source system
When I click on long text button for Unknown error in SQL interface:
The SQL interface of the application server (DBSL) has reported an unknown error. This error can be caused by:
- Overflows when aggregated data is read from the database in ABAP. If this occurs, the definition for the corresponding key figure must be changed.
- Internal errors
It seems to be some kind of Overflow error. Is there any way to get more information on the cause
Of this erroru2026.
THANKS A LOT.

I tried SM50, it shows me all processes, but I still cannot figure how to set developer trace. Following is detailed information on what I am doing in copy of cubes and errors I am getting:
Subject: Troubleshoot Copy of Cubes
I have tried to copy several cubes on my BI 7.0 and all of them same error, so I am wondering whether I am doing something fundamentally wrong.
                System error in program SAPLRS_EXECPTION and from RS_EXEPTION_TO_MESSAGE
                SQL Error 0
                Unknown error in SQL Interface
                Errors in source system
After error occurs I get following message in mail:
          The error occurred in Extractor.
           Refer to the error message.
                 Procedure
             How you remove the error depends on the error message.
                 Note
          If the source system is a Client Workstation, then it            is possible that the file that you wanted to load was being edited
at the time of the data request. Make sure that the file is in
the specified directory, that it is not being processed at the
I looked in SM21, system logs, whenever error occurs, I see the u201C
Database selection with invalid cursor &5&5
The database interface was called by a cursor (in a FETCH or CLOSE cursor operation) that is not flagged as opened. This can occur if a COMMIT or ROLLBACK was executed within a SELECT loop (which closes all opened cursors), followed by another attempt to access the cursor (for example, the next time the loop is executed).
I DO NOT UNDERSTAND WHEN I AM COPYING FROM CUBE, WHY SAP BW will generate u201Cinvalid cursoru201D message. Not sure whether it is normal, i.e., not a real error,
My cube copying (from cube 1 to cube 2) is a straightforward procedure:
a.     Select Copy from Cube 1 and create Cube 2.
b.     Create Export Data Source from Cube 1 Menu.
c.     From Cube 2 menu, Create Update rules, In update rules select DataSource as 8Cube1.
d.     Create an Info Package for 8Cube1 under Infosource/DataSource and then run the package.
Certain no of records e.g.. 3248 or so get loaded and then the error messages are generated, why?
Really appreciate any help. I tried SM37, does not give any clue. I also Tried SM50, it shows me the process, but I still cannot figure how to generate developer trace.
Since behavior is same for several cubes I tried, something else also needs to be done, I do not know what???

HOW TO HIDE THE SLIN ERRORS

how to hide the slin errors

Hi Shilpa.
I would like to suggest my opinion,
Refered from,
[SAP HELP Library - Standard Reference for Errors and Warnings|http://help.sap.com/saphelp_nw04s/helpdata/en/43/00c5b7daf15166e10000000a1553f6/content.htm]
SLIN Infos point to possible (semantic) program errors. According to the situation, the program should be changed or the messages should be switched off.+
+Only the SLIN messages of this category can be switched off by means of special comments
Reference,
Use u201C#EC * to hide warnings from places that cannot be removed by proper typing.
[SDN Library - Standard Reference - PDF - Make ABAP code unicode enabled - Hide SLIN Error Messages|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c031aa90-0201-0010-b69d-88a278e158c8]
Hope that's usefull.
Good Luck & Regards.
Harsh Dave

How to remove error from propagation and verify replication is ok?

Have a one-way schema level streams setup and the target DB is 3-node RAC (named PDAMLPR1). I run a large insert at source DB (35million rows). After committing on source, I made a failure test on the target DB by shutting down the entire database. The streams seems stopped as the heartbeat table sequence (it inserts a row each min) on target is still reflecting last night. We get the error in the dba_propagation:
ORA-02068: following severe error from PDAMLPR1
ORA-01033: ORACLE initialization or shutdown in progress
ORA-06512: at "SYS.DBMS_AQADM_SYS", line 1087
ORA-06512: at "SYS.DBMS_AQADM_SYS", line 7639
ORA-06512: at "SYS.DBMS_AQADM", line 631
ORA-06512: at line 1
08-FEB-10
while capture, propagation, and apply are all in enabled status. I restarted capture and propagation at source DB. But still see the error message above. My questions are:
1. How to delete the error from dba_propagation?
2. How to verify the streams is still running fine?
In normal test, during such large insert, the heartbeat table added a row in an hour. Very slow.
thanks for advice.

Well, if I can give you my point of view: I think that 35 millions LCR is totally unreasonnable. Did you really post a huge insert of 35 millions then committed that single utterly huge transaction? Don't be surprised it's going to work very very hard for a while!
With a default setup, Oracle recommends to commit every 1000 LCR (row change).
There are ways to tune Streams for large transaction but I have not done so personnaly. Look on Metalink, you will find information about that (mostly documents id 335516.1, 365648.1 and 730036.1).
One more thing: you mentionned about a failure test. Your target database is RAC. Did you read about queue ownership? queue_to_queue propagation? You might have an issue related to that.
How did you setup your environment? Did you give enough streams_pool_size? You can watch V$STREAMS_POOL_ADVICE to check what Oracle think is good for your workload.
If you want to skip the transaction, you can remove the table rule or use the IGNORETRANSACTION apply parameter.
Hope it helps
Regards,

Video tag is not working in firefox how can we remove this error

Video tag is not working in firefox. In this some kind of mmie type error Kindly remove this error .If you have any kind of solution,Please tell me how can it fix it?

Can you post a link to a publicly accessible page that doesn't require authentication (signing on) where you see such a not working video tag?
Do they work here?
*Firefox Videos: http://www.mozilla.com/firefox/video/
See also:
* https://developer.mozilla.org/en/Media_formats_supported_by_the_audio_and_video_elements

HOW TO REMOVE SLIN ERROR?

Similar Messages

Maybe you are looking for