How to remove Sorting of the columns from Advance TAB

Hello Experts,
I have a simple question -
Have a report which produces results from values selected from prompt. The data in report is correct, however the ffirst 2 columns in the Report are being grouped by. So when a user downloads the Report in EXCEL, they see that the fiirst 2 columns are not populated in all the cells of the Excel and they have to populated them manually.
I have tried to remove the sort order in the Advance SQL tab, but without any luck. I have tried to rearrange the columns of the reports as well, but no luck as well
Any quick fix for this behaviour ?
Regards
Sam

Your subject shouldn't be that.. ;), if you are looking for repeating values for all the cells for that particular column
go to first 2 column properties > Column Format .
In "Value suppression" section, you'll find repeat option radio button. check that and click ok. Now test your report

Similar Messages

How to Remove totals on few columns from SEM BPS layout

On SEM BPS layout it has 10 5 charatestics columns
and 10 key figure columns.
out of these key figures I want see totals on some
coulmns and for few columns I do not want to see totals.
for wxample it does not make sense of seeing total under
the salary incrase percentage coulmn.
Please suggest anyway we can remove total for some
columns on the layout

Hey, thanks -- everything worked as you described. It never would have occurred to me that the "put back" button refers to the browser selection not the layout selection, for reasons I give below.
I think Aperture exhibits some conceptual confusion here. First of all, a "light table" is created by the New > Light Table command, and you add images to the newly created light table just as you would add them to an album. But those images don't go on the light table layout until you drag them from the browser to the layout table. The "put back" button and "remove from light table" contextual menu command both mean remove from the layout. The phrasing of the contextual menu command make it sounds as if it will remove the clicked image from the light table's collection of images, like removing an image from an album -- it would have made more sense to name this command "put back". Furthermore, the "put back" button is above the layout display, not above the browser, which to me implies that it applies to selections in the layout display. To select an image in the browser, and click "put back selected" seems backwards -- if you just selected the image in the browser, your attention is focused on the browser, not the layout; from the browser's point of view, the button should read "bring back" not "put back".
The documentation didn't really help when I was trying to figure this out. Sometimes the Aperture documentation refers to just a "light table", as on the overview on page 732. On pages 733 and 734, though, it refers to a "light table album". On page 735 of the Aperture manual there is a very brief explanation of how "to add images to the light table" and "to remove an image from the light table". Here, "light table" refers to the layout not the album. The explanation of the "Put Back Selected" button says to select an image then click the button, and the picture shown is of an image selected in the layout, not in the browser.

How to remove all of the tags from a HTML file

Hi all,
I am developing a search program.
User will enter a word or some text in a textfield and after click on go button it will search the word from the html file which is reside in c: drive.
What I am trying to do is -- reading file and storing data/contents of the file in a String and so on............then store in a Vector.....so on.......
My question is ----- how can I remove all of the html tags such as: <p>, <b>,</b> <h1>, <strong>, or whatever from the String (where I store the data/contents of the html file) or from a HTML file.
I would appreciate sample code if anyone has any.
please help me in this way.
Thanks in advance
Thanks a lot.
amitindia

Hi dear,
I got the link and have found examples.
thanks for solving my problem.
Thanks for your prompt reply.
amitindia
India

How can I display all the columns on the screen without scrolling from side to side?

My clinic software has many columns. How can I display all the columns without having to scroll from left to right all the time?

If the software you are using doesn't offer the ability to increase or decrease document size, as many do, then the only way is to increase your screen resolution. If that's not possible, maybe you can decrease your font size? If you can't do any of these, I think you're out of luck!

TS3274 How to remove an old iCloud account from my IPad. The account (email) was on my dad's name and he resently change it and now i can't reset or delete his iCloud account without his password. Please advise on the procedure. Thanks.

How to remove an old iCloud account from my IPad. The account (email) was on my dad's name and he resently change it and now i can't reset or delete his iCloud account without his password. Please advise on the procedure. Thanks.

If you are trying to activate an iPad or iPhone and it is asking for a previous owners Apple ID and password, you have encountered the Activation Lock. This is a security feature that prevents thieves from setting up and using a stolen or lost iPad or iPhone. You have no alternative. You must use the previous owner's password to get permission to use the device. If you cannot get the password your father put on the iPad you will never be able to activate the device and no one can help you do it.

How to remove hash in the value of the field fetched from application serve

Hi,
   I am populating values of the file which is in the application server to the internal table. But for the last field hash is also populating from the file along with the value.
Please suggest me how to remove hash in the value of the last field.
Thanks,
Neelima.

Hi Vinay,
Please check the program. I have used the replace statement but it is not working.
IF NOT v_sap_bom_rec IS INITIAL.
Spliting the records at '~' delimiter
    SPLIT v_sap_bom_rec AT c_del INTO wa_bom_file-model_name
                                       wa_bom_file-product_code
                                       wa_bom_file-description
                                       wa_bom_file-product_type
                                       wa_bom_file-mfg_part_num
                                       wa_bom_file-mfg_part_desc.
    REPLACE cl_abap_char_utilities=>horizontal_tab IN wa_bom_file-mfg_part_desc WITH space .
    wa_bom_file-status = c_status.
    APPEND wa_bom_file TO i_bom_file.
But it is not working.
Please help me..
Thanks
Neelima

How to remove a old iCloud account from the iphone

I purchase a iPhone from somebody and the phone has been reset but the iCloud shows that he phone has reach it max numbers of free account to sign. So how I remove a old iCloud account from this phone. I do not have phone support so I am unable to get help from apple can anybody help me

is there anyone there who can help or any type of subjection to this matter or am i the only one who has come accross this issue.

How to get the columns from SYS.ALL_COLUMNS and use it in COALESCE() Function.

Hi,
I have table called Employe. And the Columns are Emp_ID,EMP_NAME,SRC_SYS_CD,DOB
I have Query like
Select
COALESCE(MAX(CASE WHEN src_sys_cd='1' THEN Emp_id END), MAX(CASE WHEN src_sys_cd='2' THEN Emp_Id END))Emp_Id,
COALESCE(MAX(CASE WHEN src_sys_cd='1' THEN Emp_name END), MAX(CASE WHEN src_sys_cd='2' THEN Emp_Name END))Emp_name,
COALESCE(MAX(CASE WHEN src_sys_cd='1' THEN dob END), MAX(CASE WHEN src_sys_cd='2' THEN dob END))dob ,
from Employe
group by dob.
I want to generalize the query like get the columns from SYS.ALL_COLUMNS table for that table name and want to pass it to COALEACE() function. I tried with Cursor. But i didnt get the appropriate results.
Is there any way to achieve this? Please help me out in this regard.
Thanks,

Is this the kinda thing you're after?
Add a filter to the queries to get just a single table/
WITH allCols AS (
SELECT s.name as sName, o.name AS oName, c.name AS cName, column_id,
CASE WHEN st.name in ('float','bigint','tinyint','int','smallint','bit','datetime','money','date','datetime2','uniqueidentifier','sysname','geography','geometry') THEN st.name
WHEN st.name in ('numeric','real') THEN st.name + '('+CAST(c.scale AS VARCHAR)+','+CAST(c.precision AS VARCHAR)+')'
WHEN st.name in ('varbinary','varchar','binary','char','nchar','nvarchar') THEN st.name + '(' + CAST(ABS(c.max_length) AS VARCHAR) + ')'
ELSE st.name + ' unknown '
END + ' '+
CASE WHEN c.is_identity = 1 THEN 'IDENTITY ' ELSE '' END +
CASE WHEN c.is_nullable = 0 THEN 'NOT ' ELSE '' END + 'NULL' AS bText,
f.name AS fileGroupName
FROM sys.columns c
INNER JOIN sys.objects o
ON c.object_id = o.object_id
AND o.type = 'U'
INNER JOIN sys.systypes st
ON c.user_type_id = st.xusertype
INNER JOIN sys.schemas s
ON o.schema_id = s.schema_id
INNER JOIN sys.indexes i
ON o.object_id = i.object_id
AND i.index_id = (SELECT MIN(index_id) FROM sys.indexes WHERE object_ID = o.object_id)
INNER JOIN sys.filegroups f
ON i.data_space_id = f.data_space_id
), rCTE AS (
SELECT sName, oName, cName, column_id, CAST(cName + ' ' + bText AS VARCHAR(MAX)) as bText, CAST(cName AS VARCHAR(MAX)) AS colList, fileGroupName
FROM allCols
WHERE column_id = 1
UNION ALL
SELECT r.sName, r.oName, r.cName, c.column_id, CAST(r.bText +', ' + c.cName + ' ' +c.bText AS VARCHAR(MAX)), CAST(r.colList+ ', ' +c.cName AS VARCHAR(MAX)), c.fileGroupName
FROM allCols c
INNER JOIN rCTE r
ON c.oName = r.oName
AND c.column_id - 1 = r.column_id
), allIndx AS (
SELECT 'CREATE '+CASE WHEN is_unique = 1 THEN ' UNIQUE ' ELSE '' END+i.type_desc+' INDEX ['+i.name+'] ON ['+CAST(s.name COLLATE DATABASE_DEFAULT AS NVARCHAR )+'].['+o.name+'] (' as prefix,
CASE WHEN is_included_column = 0 THEN '['+c.name+'] '+CASE WHEN ic.is_descending_key = 1 THEN 'DESC' ELSE 'ASC' END END As cols,
CASE WHEN is_included_column = 1 THEN '['+c.name+']'END As incCols,
') WITH ('+
CASE WHEN is_padded = 0 THEN 'PAD_INDEX = OFF,' ELSE 'PAD_INDEX = ON,' END+
CASE WHEN ignore_dup_key = 0 THEN 'IGNORE_DUP_KEY = OFF,' ELSE 'IGNORE_DUP_KEY = ON,' END+
CASE WHEN allow_row_locks = 0 THEN 'ALLOW_ROW_LOCKS = OFF,' ELSE 'ALLOW_ROW_LOCKS = ON,' END+
CASE WHEN allow_page_locks = 0 THEN 'ALLOW_PAGE_LOCKS = OFF' ELSE 'ALLOW_PAGE_LOCKS = ON' END+
')' as suffix, index_column_id, key_ordinal, f.name as fileGroupName
FROM sys.indexes i
LEFT OUTER JOIN sys.index_columns ic
ON i.object_id = ic.object_id
AND i.index_id = ic.index_id
LEFT OUTER JOIN sys.columns c
ON ic.object_id = c.object_id
AND ic.column_id = c.column_id
INNER JOIN sys.objects o
ON i.object_id = o.object_id
AND o.type = 'U'
AND i.type <> 0
INNER JOIN sys.schemas s
ON o.schema_id = s.schema_id
INNER JOIN sys.filegroups f
ON i.data_space_id = f.data_space_id
), idxrCTE AS (
SELECT r.prefix, CAST(r.cols AS NVARCHAR(MAX)) AS cols, CAST(r.incCols AS NVARCHAR(MAX)) AS incCols, r.suffix, r.index_column_id, r.key_ordinal, fileGroupName
FROM allIndx r
WHERE index_column_id = 1
UNION ALL
SELECT o.prefix, COALESCE(r.cols,'') + COALESCE(', '+o.cols,''), COALESCE(r.incCols+', ','') + o.incCols, o.suffix, o.index_column_id, o.key_ordinal, o.fileGroupName
FROM allIndx o
INNER JOIN idxrCTE r
ON o.prefix = r.prefix
AND o.index_column_id - 1 = r.index_column_id
SELECT 'CREATE TABLE ['+sName+'].[' + oName + '] ('+bText+') ON [' + fileGroupName +']'
FROM rCTE r
WHERE column_id = (SELECT MAX(column_id) FROM rCTE WHERE r.oName = oName)
UNION ALL
SELECT prefix + cols + CASE WHEN incCols IS NOT NULL THEN ') INCLUDE ('+incCols ELSE '' END + suffix+' ON [' + fileGroupName +']'
FROM idxrCTE x
WHERE index_column_id = (SELECT MAX(index_column_id) FROM idxrCTE WHERE x.prefix = prefix)

How do I sort data in columns using Pages

How do I sort data in columns (alphabetically) using Pages?

If you are referring to text or numbers in a column (not table), then get the free Service plug-in WordService, from Devon Technologies. Put it in the
/Users/yourlogin/Library/Services folder location.
Select your data to be sorted. From the Pages menu > Services > Sort Ascending will do the trick. This will work with Pages ’09 and Pages v5.2 or later, as well as Apple Mail, TextEdit, etc.
The WordService files include a PDF (Read Me) that describes the services included with the package.
The Service items will only appear in the Services submenu when you have selected your data prior to sort. If these WordService items do not appear in the Services menu as they should per the preceding sentence, then you will need to enable them.
System Preferences > Keyboard > Shortcuts > Services. Scroll through the right hand list of services until you encounter Sort Ascending and ensure that it is selected.
If you were referring to sorting a column of data in a table:
Pages ’09
Select all cells containing your unordered data. In the Table Inspector, under Edit Rows & Columns, choose Sort Ascending.
Pages v5.2
Select cells as before. In the Table heading (A, B, C, etc.) when you roll over the letter, a down-arrow appears. Click, and choose Sort Ascending from the drop down menu.

How to remove "Other..." from my sign-in screen?

How to remove "Other..." from my sign-in screen?
I was trying to change an Administrator Account by starting from my Leopard Install DVD and from the Utilities menu choosing Reset Password, etc. A longish story involving my inability to shut-down the computer while others are signed in but not actually using the computer. In Tiger I was able, since moving to Leopard I need to go into each of their accounts and manually log each of them out. A headache.
For right right now I need to get rid of the Other... account name, etc from my sign-in screen. How do I do this in plain English please? I find all this Admin jargon does my head in.
Cheers, SZ

V.K. wrote:
You need to disable the root user. From what I understand you enabled it from the install DVD's password reset.
Use [these instructions|http://docs.info.apple.com/article.html?artnum=106290] to disable it.
Those instructions led me down this path, I have not the head to deal with them again today. My eyes glaze-over listening to myself read them aloud. SZ
Message was edited by: ShakuZen

How to remove plug in ._v1_.swf from safari

How to remove plug in ._v1_.swf from safari. Can't do it the usual ways.

Please post the crash report.

How can I get all the stuff from my old iPad 2 to my new iPad 2? I have an apple id and have synced and backed up my old iPad 2 regularly.

How can I get all the stuff from my old iPad 2 to my new iPad 2? I have an apple id and have synced and backed up my old iPad 2 regularly.

Sky is right you can restore the old backup and it will not affect the old iPad
To make sure do this:
1. If you have the old one then just turn off wi-fi and the iPad (that's just for your peace of mind)
2. Put new iPad on airplane mode (just for no interruptions )
3. Connect it (while it's on, don't shut it down)
4. Follow prompts and when it asks if you want to setup as new or restore CHOOSE: RESTORE
5. It will make its magic (just wait for it to sync, restarts, and finishes) it might ask you to update software if it does just accept
6. You can rename your new iPad like that you can have a fresh back up
7. ENJOY your new iPad
----------OR-----------
1. Do the above steps 1, 2, 3.
2. On step 4 you can choose to set up as new
3. Then you can choose what to sync on it (click on iPad on the left panel then the tabs on top you choose what you want on it (you can also do that if you restore)
4. Follow steps 5, 6, 7.
****If you don't have your old iPad you can remove it from your account ****
****Also when they sync it to a new computer it will setup as new unless they had an old one then they will restore it their old one****
****if you have it connected with your MobileMe or iCloud and you have the find my _____ you can also wipe it as soon as it comes online****
LET ME KNOW IF YOU HAVE ANY QUESTIONS OR CONCERNS
AGAIN ENJOY YOUR NEW IPAD!!!

How to run form in the background from command line

please can anybody tell me to
how to run form in the background from command line
vishal

Ummm....Oracle Forms is a foreground runtime kind of thing. What you want is a database procedure (or an OS utility - it depends on what sort of processing you want to do in the background).
Cheers, APC

To convert the values in the column from upper case to Camel Case.

Hi All,
I have requirement to convert the column values(Data in the Columns) from upper case to camel case in pivot table view.
For Eg:
I have
Table Name:Billing_Transaction
under Billing_Transaction table i Have column Comment_Text
Data in Comment_Text Column is
INSERT,
EXPORT,
AMEND
How i will change these values in to Insert,Export,Amend.(Camel Case condition)
I want only the first letter of a word to be in caps and others to be in smaller case.
Thanks,
Chitra Subramani.

Hi Aravind,
Thanks for immediate response.your query is helpful.But i need to satisfy another condition in my requirement by using same formula.
"REPLACE(UPPER(SUBSTRING(BILLING_TRANSACTION.BILLING_TRANSACTION_DESC FROM 1 FOR 1)) || lower(substring(BILLING_TRANSACTION.BILLING_TRANSACTION_DESC FROM 2)), '_', ' ')"
above query satisfying Camil case and replacing '_' with ' '(space)......but inthis query i want add another condition to satisfy camil case for word which comes after '_'
for example:
DECLINE_IMPORT
above query satisfying 2 conditions to convert above data into
"Decline import"
But in my requirement for word 'import' also it should come in camil case condition like
"Decline Import"
Thanks & Regards,
Chitra
Edited by: user6371773 on Apr 25, 2011 6:29 AM

How to remove a broken charger nib from my iPad?

How to remove a broken charger nib from an iPad?
<Email Edited by Host>

Was it the old 30-pin connector, or the new Lightning plug? There have been sporadic reports of the new connector snapping just ahead of the two side "dimples" that are used to hold it in place, but this would be the first time I hear of similar failure on the older and bigger connectors.
If at all possible, I would suggest a visit to an Apple Store for free assessment. Else proceed with caution either with tweezers and/or a pin to nudge the fragments out. Maybe a review of the corresponding teardown of your model at IFixIt.com may help you visualize how to attack the problem.

How to remove Sorting of the columns from Advance TAB

Similar Messages

Maybe you are looking for