How to remove the header name in KM navigation iview

Hi,
I have an KM iview with linklistexplorer as layout.
It is displaying "Name" as header along with all the files.
I want to remove this header "Name" from the iview.
Can anyone help me on this.
Raghu

Hi Raghu,
The layoutset you are referring to is using the collection renderer LinkListCollectionRenderer. This defines the properties to be rendered for each resource, which in the standard are
"rnd:image,rnd:displayname(contentLink)"
Change this to
"rnd:image,rnd:displayname(contentLink/noTitle)".
See http://help.sap.com/saphelp_nw70/helpdata/en/79/a1d23e6b2c3d67e10000000a114084/frameset.htm for an overview over these modifiers.
Hope it helps
Detlev

Similar Messages

How to remove the header in Report from SQVI

Folks,
I created a report by joining 4 tables in SQVI, the output data is around 200 pages. I need to remove the header from the report so I can down load to a excel.
Can some tell me how to switch of the header in SQVI ( Layout Mode). I did this before using Legend on/off but I quite didn't remember how I exactly did it.
Thanks,
Kumar

Hi,
It is not about the thing that, whether your source is XML or flat file. If you dont want some thing in your source file , dont consider it and dont map it with your target structure. think that, your not getting the header in your source. What is the header here.
<Emp_details>
<Emp_Id> Employee No </Emp_Id>
<Emp_Name> Employee Name </Emp_Name>
</Emp_details>
<Emp_details>
<Emp_Id> 1234 </Emp_Id>
<Emp_Name> xxxx </Emp_Name>
</Emp_details>
<Emp_details>
<Emp_Id> 5678 </Emp_Id>
<Emp_Name> yyy </Emp_Name>
</Emp_details>
you have two fields under node Emp_details. What do u want to avoid here?
Regards,
Reyaz

How to remove the header tag in the XML data ?

Hi All,
I am sending an XML data from SFTP to Proxy, in that I want to remove the header tag (first tag) from the xml, while loading the data. how to do that ?

Hi,
It is not about the thing that, whether your source is XML or flat file. If you dont want some thing in your source file , dont consider it and dont map it with your target structure. think that, your not getting the header in your source. What is the header here.
<Emp_details>
<Emp_Id> Employee No </Emp_Id>
<Emp_Name> Employee Name </Emp_Name>
</Emp_details>
<Emp_details>
<Emp_Id> 1234 </Emp_Id>
<Emp_Name> xxxx </Emp_Name>
</Emp_details>
<Emp_details>
<Emp_Id> 5678 </Emp_Id>
<Emp_Name> yyy </Emp_Name>
</Emp_details>
you have two fields under node Emp_details. What do u want to avoid here?
Regards,
Reyaz

How to remove the account name from header when printing emails

In outlook 2007 using Exchange Server 2007 users wishing to print an email using memo style have a header consisting of the account user's full name and a bold line under it, then the friendly email headers and body. Is there a way to remove/configure
the memo style header?
Marc

Hi Marc,
Unfortunately, there is no way in Outlook to change or remove the name or message header which is being displayed at the top of a printed message. It is tied to the Display Name of your email account which you can’t modify yourself for an Exchange account.
More reference:
http://www.slipstick.com/problems/how-do-i-remove-my-name-when-i-print-email/
(Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.)
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Powershell: How to change the header name in a imported CSV file

HI All,
I have a csv file in which I want to change the headers names in powershell.
oldnames are name,id
newnames I want to give are: company and transit respectively.
Following is what I wrote in script:
           $a = import-csv .\finalexam\employees.csv -header name,id'
                   foreach ($a in $as[1-$as.count-1]) // I used 1 here because I want it to ignore the exiting headers.
                  { $_.name -eq company, $_.id -eq transit}
I think this not entirely correct way to do this. Can someone show me how to fix this.
Regards
SQL 75

If you're not an experienced PowerShell programmer, I recommend editing the file in a text editor and changing the name that way.
-- Bill Stewart [Bill_Stewart]

How to pass the "path" dynamically to KM navigation iView ?

HI Experts.
This is my issue:
I have a WD Java iView, with a data table.
In the same page, I have a KM navigation iview too.
Conceptually, each row in this table, have some documents in a CM Repository asociated.
This repository has subfolders for each master data in the table.
(example: imagine a table with material master data, and a repository with a subfolder for each material,
and inside of it, several unstructure documents about this material.
Then, I need to call a KM Navigation iview when click a table row, passing parameters, in special the "path".
I am using this code in my action (triggered from webdynpro iview)
     WDPortalNavigation.navigateAbsolute("ROLES://portal_content/com.stk.demos.folders.zz_demos/com.stk.demo.ch.TEST_CH/com.stk.demo.ch.Listar_Docs",
     WDPortalNavigationMode.SHOW_EXTERNAL, (String)null, (String)null,
     WDPortalNavigationHistoryMode.ALLOW_DUPLICATIONS, "test",
     (String)null, (String)null );
Partially it works, the window open and show the navigation iview, but...
in the root directory (or directory indicated in iView harcoded properties);
But I need pass the path !
How can I call that iView, dinamically using a parameter, the path (property ID: path)
to the KM navigation iView, in order to open initially in a indicated path?)
I have read this link
http://help.sap.com/saphelp_nw04s/helpdata/en/c3/235a428a1e9041e10000000a1550b0/frameset.htm
but, I still can't understand how to use this parameters.
Thanks in Advance.
Leandro.

Hi Leandro,
You can create your own proxy IView and then redirect it to KM Navigation IView.
This way you can dynamically change the path.
Check this to know about proxy IView:
KM Document Iview Source Code
/thread/190600 [original link is broken]
Regards,
Praveen Gudapati

How to Remove the MIDlet Name on The Screen of Mobile, in application

hi
I am working with Mobile application,
while running the application the MIDlet file name is always visible on the screen. So that the image moved down and partly hiden.
how to aviod this problem

If you have an email account set up on your BlackBerry, you're going to receive notifications of new emails in the Notifications Bar; there's no two ways about it. You're able to selectively not receive LED notifications or audio notifications or even vibrations notifications but as long as the email account is active on your phone, you can't get around the Notifications Bar ones.
Cheers.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

I want to remove the header and footer when printing from my mac, i can do this in the Page Setup on my PC but not on the Mac. I can do it each time I print but then it resets. How do I make a universal change?

I want to remove the header and footer when printing from my mac, I can do this in the Page Setup on my PC but not on the Mac. I can do it each time I print but then it resets. How do I make a universal change?
== This happened ==
Every time Firefox opened

Go to the "File" menu, then "Print." The window that appears will have three drop-down menus at the top.
The first is labeled "Printer",
The second is "Presets".
The third is unlabeled but has "Copies & Pages" selected by default.
Click on that third menu and select "Firefox" near the bottom of the list.

How to get the Text name to pass in the parameter header in save_text

Hi,
I am trying to change the long text of operation for historical order by using the flat file.I am using the save_text to do this.I would like to know how to get the text name in order to pass the parameter header in save_text.
I went to the tcode iw62 to get the header information of the long text.300100000009200000001
i would like to know what this 1000000092 indicates and where is this value updated in the table so that i can link it thru the order no to get the link and pass it in the text_name.
can anyone help me out?
krishnan

Hi,
Your query is.
I went to the tcode iw62 to get the header information of the long text.300100000009200000001
i would like to know what this 1000000092 indicates
In above number
300 - Client
1000000092 - AUFPL - Routing number of operations in the order (You can fetch this from table HIVG)
00000001 - APLZL - General counter for order ( You can fetch this from table HIVG).
BR,
Vijay

HT1349 how do you remove the header and footer from a document

how do you remove the header and footer from a document

It depends upon the app you are using.

How to remove the entries of the names of the previously read PDF files in order to not to leak privacy

How to remove the entries of the names of the previously read PDF files in order to not to leak privacy

Bear in mind that the files will ALSO be in Windows or Mac's recent document list, and even if they weren't, the files will still be around and available. If they are not available, then just the name may not be much of a security bit (unless the file is called my_secret_bid_for_ibm.pdf or some such).

How to see the Table Names & Field Names by other than F1 help

Hi Experts
   How to see the Table Names & Field Names by other than F1 help, & How to see the List of MM Table Names.
Rgds

The only option to see the active table/ field name is through F1 --> Technical Information. Apart from this, you can use any 3rd part application like GUIex (INbuilt in SAP ECC 6.0 ... can be activated by clicking on the tri-color button on the top right), but you need technical knowledge to understand the information. As far consolidated list of MM tables is concerned, SAP don;t provide you the same at one place, it experience and knowledge which help you in this regard. For your immediate reference MM tables are as under :
EBAN - Purchase Requisition
EBKN - Purchase Requisition Account Assignment
EBUB   - Index for Stock Transport Requisitions for Materi
EINA    - Purchasing Info Record: General Data
EINE     - Purchasing Info Record: Purchasing Organization D
EIPA     - Order Price History: Info Record
EKAB   - Release Documentation
EKAN   - Vendor Address: Purchasing Document
EKBE    - History per Purchasing Document
EKBEH - Removed PO History Records
EKBZ    - History per Purchasing Document: Delivery Costs
EKBZH - History per Purchasing Document: Delivery Costs
EKEH    - Scheduling Agreement Release Documentation
EKEK    - Header Data for Scheduling Agreement Releases
EKES     - Vendor Confirmations
EKET     - Scheduling Agreement Schedule Lines
EKETH   - Scheduling Agreement Schedules: History Tables
EKKI      - Purchasing Condition Index
EKKN    - Account Assignment in Purchasing Document
EKKO    - Purchasing Document Header
EKPA     - Partner Roles in Purchasing
EKPB     - "Material Provided" Item in Purchasing Document
EKPO    - Purchasing Document Item
EKPV    - Shipping-Specific Data on Stock Tfr. for Purch. D
EKRS    - ERS Procedure: Goods (Merchandise) Movements to b
EKUB    - Index for Stock Transport Orders for Material
EORD    - Purchasing Source List
EQUK    - Quota File: Header

Removing the header and footer in Pages

I just began to use Pages after purchasing a new ibook. In AppleWorks, headers and footers were never inserted by default. In Pages, how can I remove the header and footer in Pages so I can have more space for the body section of the document?

I had already set page margins to zero, and I disagree with you: Headers and footers still appear with a height of approximately 1/8 inch.
SInce I posted my previous message, I have experimented a bit. I was able to (almost but not quite) totally eliminate the header and footer by clicking into the header and footer area and reducing the font size to the absolute minimum. After having done that, the body was basically in-line with 0" on the vertical page ruler.
Also, in my opinion, whether or not most printers do a full page bleed is irrelevant. I should be able to work with the page body without its being offset from the page ruler if I don't want to employ a header or footer.
Rusty

How to remove the '#'symbols for infoobject movement types in bex reporting

Hi All,
I have a problem in Bex reporting. The problem is when ever executing the report that time some of the characteristic values is shown in layout '#' Symbols. i want to remove the '#' valuse in report.
is it possible please give me step by step procedure for how to remove the '#' Symbols in reporing layout.
this is very urgent please help to me on this issue.
Thanks & Regards,
Guna.

Hi Guna,
To achieve this issue, we need to replace the value of #, we need to change the description while retrieving the data from tables. So we need to write some ABAP code in SE38. Go to RSA1 transaction and go to Info objects tab. Then go to context menu for cProject Key Figures as shown below. Click on the Object Overview to get the overview of all the info objects. Here you can see the field names which are used to know the table names.
In SE11, type the table name in Database Table field. Now press F4, then you will get the next screen to select one of the P/Q/S/T tables.
Now click on the button rounded in the below screen to view the data in the table.
Now click the execute button or press F8 to view the records.
Now go to Tcode: SE38. Create a source code and give some program name for that source code. To write code, you need access key. Contact your BASIS for this.
Now write the below code for that particular table in which you want to change the value # to description Blank. In the below source code, we are updating particular table, setting the field as Blank where it is null or no value. Here the field will automatically get updated to # if there is no value or null.
update /BIC/PXXXXX set /BIC/ZXXXX = 'Blank' where /BIC/ZXXXXX is null or /BIC/ZXXXX = ''.
if sy-subrc eq 0.
write 'successful'.
commit work.
else.
write 'unsuccessful'.
endif.
OR
If this # is because of the missing master data than,
right click that IO -> maintain master
you will see first row as a blank.
whatever value you maintain in this row that will come in the report for all Not assigned # values of the master data in the report.
maintain it according to your requirement, save and activate the master data
Hope this helps u...
Regards,
KK.

How to remove the the standard button APPEND/INSERT/DELETE in webdynpro alv

Hello,
how to remove the the standard button APPEND/INSERT/DELETE in webdynpro-abap alv
Thanks
Rakshar

Use this.
    data lo_cmp_usage type ref to if_wd_component_usage.
    lo_cmp_usage =   wd_this->wd_cpuse_alv1( ).
    if lo_cmp_usage->has_active_component( ) is initial.
      lo_cmp_usage->create_component( ).
    endif.
    data lo_interfacecontroller type ref to iwci_salv_wd_table .
    lo_interfacecontroller =   wd_this->wd_cpifc_alv1( ).
    data lo_value type ref to cl_salv_wd_config_table.
    lo_value = lo_interfacecontroller->get_model(
    data: lr_std type ref to if_salv_wd_std_functions.
    lr_std ?= lo_value.
    lr_std->set_export_allowed( abap_false ).
NOte: ALV1 is alv component name
Regards
Srinivas
Edited by: sanasrinivas on Dec 1, 2011 6:11 AM

How to remove the header name in KM navigation iview

Similar Messages

Maybe you are looking for