How to 'Remove' user access from deleted dual boot system's users in existing operating system's folders and files?

I have Windows 7 Enterprise Professional, accessed earlier from (now deleted) other dual boot operating system (User folder), which shows it's users as unknowns for folder properties in Windows 7 Enterprise Professional's "C:\Users\Aniruddha",
which causes system not responding, how to 'Remove' these unknown users from folder properties of "C:\Users\Aniruddha"?
Also "C:\Users\Aniruddha\Application Data" creates many of own folders within eachselfs end folder ("C:\Users\Aniruddha\Application Data" creates a "C:\Users\Aniruddha\Application Data\Application Data", "C:\Users\Aniruddha\Application
Data\Application Data" creates a "C:\Users\Aniruddha\Application Data\Application Data\Application Data" and many) because of which system stops responding randomly, starts responding only for "ctrl+alt+del", why such self
creation begins?
Whether a standby user with same file structure copied from a user would dynamically link it's shortcut folders with Windows user from whom these folders were copied or whether there would be no link and for above said problem I would restore User's file structre
back to normal just by copying from standby user?

It seems your PC is infected with some malware. Use a trusted antivirus software with the latest definition updates installed to scan and remove the malware.
Balaji Kundalam

Similar Messages

  • Cisco Prime 2.0 Infrastructure-how to remove unneccessary interfaces from monitoring

    Hello all,
    We have Cisco Prime 2.0 Infrastructure and I would like to know how to remove certain interfaces from monitoring?  For example, I do not need monitoring on some ISDN and FXS/FXO ports.  I am receiving email alerts for ISDN channels going up/down for example.   Thanks.

    take a look at:::
    http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/2.0/user/guide/setup_groups.html

  • How to restrict the user(Schema) from deleting the data from a table

    Hi All,
    I have scenario here.
    I want to know how to restrict a user(Schema) from deleting the values from a table created in the same schema.
    Below is the example.
    I have created a table employee in abc schema which has two values.
    EMPLOYEE
    ABC
    XYZ
    In the above scenario the abc user can only fire select query on the EMPLOYEE table.
    SELECT * FROM EMPLOYEE;
    He should not be able to use any other DML commands on that table.
    If he uses then Insufficient privileges error should be thrown.
    Can anyone please help me out on this.

    Hi,
    kumar0828 wrote:
    Hi Frank,
    Thanks for the reply.
    Can you please elaborate on how to add policies for a table for just firing a select DML statement on table.See the SQL Packages and Types manual first. It has examples. You can also search the web for examples. This is sometimes called "Virtual Private Database" or VPD.
    If you have problems, post a specific question here. Include CREATE TABLE and INSERT statements to create a table as it exists before the policies go into effect, the PL/SQL code to create the policies, and additonal DML statements that will be affected by the policies. Show what the table should contain after each of those DML statements.
    Always say which version of Oracle you're using. Confirm that you have Enterprise Edition.
    See the forum FAQ {message:id=9360002}
    The basic idea behind row-level security is that it generates a string that is automatically added to SELECT and/or DML statement WHERE clauses. For example, if user ABC is only allowed to query a table on Sunday, then you might write a function that returns the string
    USER  != 'ABC'
    OR      TO_CHAR (SYSDATE, 'DY', 'NLS_DATE_LANGUAGE=ENGLISH') = 'SUN'So whenever any user says
    SELECT  *
    FROM    table_x
    ;what actually runs is:
    SELECT  *
    FROM    table_x
    WHERE   USER  != 'ABC'
    OR      TO_CHAR (SYSDATE, 'DY', 'NLS_DATE_LANGUAGE=ENGLISH') = 'SUN'
    ;If you want to prevent any user from deleting rows, then the policy function can return just this string
    0 = 1Then, if somone says
    DELETE  employee
    ;what actually gets run is
    DELETE  employee
    WHERE   0 = 1
    ;No error will be raised, but no rows will be deleted.
    Once again, it would be simpler, more efficient, more robust and easier to maintain if you just created the table in a different schema, and not give DELETE privileges.
    Edited by: Frank Kulash on Nov 2, 2012 10:26 AM
    I just saw the previous response, which makes some additional good points (e.g., a user can always TRUNCATE his own tables). ALso, if user ABC applies a security policy to the table, then user ABC can also remove the policy, so if you really want to prevent user ABC from deleting rows, no matter how hard the user tries, then you need to create the policies in a different schema. If you're creating things in a different schema, then you might as well create the table in a different schema.

  • How to remove an iphone from my id

    hi,
    once my friend sync-ed his iphone with my computer. then whenever he is in wi-fi zone it is asking password for my used id for updating the apps. how to change the user name in his phone or how to remove his device from my apple ID. please help.
    thanks
    karthik

    The only way to fix this is for your friend to delete all the content, on his/her phone, obtained using your ID. Fact is, that's called stealing. There is no other fix.

  • How to remove available downloads from the list

    how to remove available downloads from the list without it resuming when i open itunes or check for available downloads?

    There is not a way to remove them from the list.  Just let them download, and then delete them from your library when they are done.

  • How to remove "open dns" from imac

    how to remove "open dns" from imac

    Unlock the Network preference pane, if necessary, by clicking the lock icon in the lower left corner and entering your password. Cllck Advanced, open the DNS tab, and delete the server addresses. Click OK and then Apply.

  • How to remove a node from nlb at runtime?

    hello,
    i need to temporally exclude a node from an nlb.
    May happen that a server is up and working but the web application i'm balancing is out of sinch with the same application in the others nodes.
    Eg. some static variables are not the same of the same static variables of other nodes, because of a timeout, a write error and so on but the server is still working.
    in this case i need to stop the server from nlb because the information in the web application is not in sinch with other nodes.
    I need to prevent users from being serverd from this out to date server, untill it will became updated, but i need to do this programmatically
    how can i do it?

    "DuoMi" <[email protected]> wrote in message
    news:gnojbf$2sg$[email protected]..
    > How to remove a node from XMLList
    >
    > I want remove the first node from XMLList
    >
    >
    > and how to get the combobox all values string:
    >
    > <data>
    > <value>2</value>
    > </date>
    > <data>
    > <value>5</value>
    > </date>
    > <data>
    > <value>8</value>
    > </date>
    >
    > I need a string whit value "2,5,8"
    >
    > thkan you.~
    I think something like
    comboBox.dataProvider..value.toString()
    will work.

  • How to remove a DC from DTR?

    Hi all,
    what is the best way to remove a DC from the Development Configuration Perspective?
    The DC was created by myself and is not used by others.
    Thanks for your help
    Regards,
    RK
    [How to remove a DC from DTR?;

    Hi,
    We recently released a note which describes how to delete a DC (with certain limitations): SAP Note 864515.
    Regards,
    Manohar
    Link to the Note : http://service.sap.com/~form/handler?_APP=01100107900000000342&_EVENT=DISPL_TXT&_NNUM=864515

  • How to remove a folder from claud files

    how to remove a folder from claud files?

    Folder (and file) deletion is a two-part process. First you Archive the file from the Files page at https://creative.adobe.com/files, or by deleting it from the Creative Cloud Files folder on your computer. Then you Permanently Delete the folder from the Archive at https://creative.adobe.com/archive.
    Help article: Creative Cloud Help | Manage and Sync files

  • How to remove a list from a page ?

    I added a list to a page and then later decided it would be easier to add the list to page 0. Now I can't find how to remove the list from the page.
    Edited by: Rene W. on Oct 6, 2008 1:52 AM

    Ok sorry I understood you wrong then.
    I tried to recontruct your problem and did the following things.
    1. Created a new list in: Home>Application Builder>Application 305>Shared Components>Lists>Create / Edit List
    2. Created a new region on page 2: Home>Application Builder>Application 305>Page 2>Create Region Type: List, Name:"test1"
    3. Created a new region on page 1: Home>Application Builder>Application 305>Page 1>Create Region Type: List, Name: "test2"
    4. Deleted region "test1" on page 2
    5. List and region still survived on page 1. :D
    Tobias

  • How to remove itune purches from my ihpone?

    How can i remove Itune  purches from my iphone?

    If your refering to apps, Press on the app and hold it till it starts to jiggle, then tap the X in the top left, then ok to delete.

  • How to remove the Char.from one Operating Concern

    Hi Guys,
    How to remove the Char. from one Operating Concern.
    I have created one Char. (WWDOC) and moved to Operating Concern (OOCC). Operating Concern is in red status.
    Now, i want to remove that new assigned Char. (WWDOC)from the operating concern (OOCC). I did't find any option in the menu also.
    Appreciate your help.....
    T&R
    VVR

    Hi Sasi,
    Iam not able to push back that char. from my operating concern. In help it is given you have to delete the data contents in the table before pushing back. Please let me know if any other option available.
    Thanks for your reply.
    VVR

  • How to remove the KF from cube .

    How to remove the KF from cube , I am not able to .
    When I drag the KF outside the structure , I am not able to .
    Regards,

    Hi Jain,
    If data is available in the Info cube we can not Edit,delet and Add a infoobject.But In BI7.0 we a option called remodeling in administration Tab.By this we can add a new infoobject or we can delet it nad we can edit it also.
    i hope this will help u
    assigne point if this help u
    Regarding
    JT Goud

  • How  to remove the check from ShpmntCostsRel. (field VTTK-    FRKRL)

    Hi Experts,
    Can you please tell me to how  to remove the check from ShpmntCostsRel. (field VTTK-    FRKRL) when saving of the shipment document.

    shipment cost calculation only on the Leg level and not on header level. Currently a lot of confusion happened after creating the shipment cost document and found that the status is u201CBu201D.
    now we intend to define detailed specifications to how to create this new user exit to update the shipment cost relevancy at shipment header.
    The main functionality of the user exit  to be created is to remove the check from ShpmntCostsRel. (field VTTK-    FRKRL).can u pls tell how to do this.

  • How to remove the worksets from the Top level navigation for the ESS role.

    Hi All,
    I am working on enabling and disabling certain services in the ESS worksets.
    we are using EP 7.0, ECC 6.0 (NW2004s).
    When I login as a user with ESS role, I can view the changes in the overview pages. However, the worksets are still visible in the TOP Level navigation of th poral. can anyone please explain me how to remove the workset from the Top level navigation.
    Thanks for your help
    Regards
    SM

    Hi,
    Go to the ESS role via Content Admin, then double click the workset (or page or iview) and in the drop down select navigation. Then click the <i>Yes</i> radio button of the "<i>Invisible in Navigation</i>" property.

Maybe you are looking for