How to render image from binary property of node?

Hello!
How to put the image to the page from binary property of node in cms? How tags can i use?

Hi,
I have an additional question, regarding the images of a page. As stated above, rendering them works fine. But now I would also like to have them resized within certain boundaries. Is there a way to define the min/max width/height in the design of the page component for these images?
I tried adding a node (name='image', jcr:primaryType=nt:unstructured) to /etc/designs/<myproject>/jcr:content/<mypagecomponent>. I then added minHeight, minWidth, maxHeight, ... properties to that node, but it seems they are not being picked up by the img.png.java servlet from the libs/foundation/page component.
I created this design node based on a similar node which was added in the design of <mypagecomponent> for an 'image' in a 'par' when I changed the design of it.
So I'm wondering if it is at all possible to define a design for the image of a page and if it, how I should do it.
Kind regards,
Luc

Similar Messages

How to load images from css file in JavaFX 8

I have this css file which loads images in JavaFX 8 application:
#pill-left {
    -fx-padding: 5;
     -fx-border-image-source: url("/com/dx57dc/images/left-btn.png");
    -fx-border-image-slice: 4 4 4 4 fill;
    -fx-border-image-width: 4 4 4 4;
    -fx-border-image-insets: 0;
    -fx-border-image-repeat: stretch;
     -fx-background-color: null !important;
#pill-left:selected { -fx-border-image-source: url("/com/dx57dc/images/left-btn-selected.png"); }
#pill-left .label {
    -fx-text-fill: #d3d3d3;
    -fx-effect: dropshadow( one-pass-box , rgba(0,0,0,0.75) , 0, 0.0 , 0 , -1 );
#pill-left:selected .label {
    /* -fx-text-fill: black; */
    -fx-text-fill: white;
    -fx-effect: dropshadow( one-pass-box , white , 0, 0.0 , 0 , 1 );
#pill-center {
    -fx-padding: 5;
     -fx-border-image-source: url("/com/dx57dc/images/center-btn.png");
    -fx-border-image-slice: 4 4 4 4 fill;
    -fx-border-image-width: 4 4 4 4;
    -fx-border-image-insets: 0;
    -fx-border-image-repeat: stretch;
     -fx-background-color: null !important;
#pill-center:selected { -fx-border-image-source: url("/com/dx57dc/images/center-btn-selected.png"); }
#pill-center .label {
    -fx-text-fill: #d3d3d3;
     -fx-effect: dropshadow( one-pass-box , rgba(0,0,0,0.75) , 0, 0.0 , 0 , -1 );
#pill-center:selected .label {
    -fx-text-fill: black;
    -fx-effect: dropshadow( one-pass-box , white , 0, 0.0 , 0 , 1 );
#pill-right {
    -fx-padding: 5;
    -fx-border-image-source: url("/com/dx57dc/images/right-btn.png");
    -fx-border-image-slice: 4 4 4 4 fill;
    -fx-border-image-width: 4 4 4 4;
    -fx-border-image-insets: 0;
     -fx-border-image-repeat: stretch;
    -fx-background-color: null !important;
#pill-right:selected { -fx-border-image-source: url("/com/dx57dc/images/right-btn-selected.png"); }
#pill-right .label {
     -fx-text-fill: #d3d3d3;
    -fx-effect: dropshadow( one-pass-box , rgba(0,0,0,0.75) , 0, 0.0 , 0 , -1 );
#pill-right:selected .label {
    -fx-text-fill: black;
    -fx-effect: dropshadow( one-pass-box , white , 0, 0.0 , 0 , 1 );
The images are located at the Java package com.dx57dc.images
In Java 7_25 this code works as expected but in JavaFX 8 b99 I get this error:
ava.lang.NullPointerException
at com.sun.javafx.sg.prism.NGRegion.renderContent(NGRegion.java:1129)
at com.sun.javafx.sg.prism.NGNode.doRender(NGNode.java:1598)
at com.sun.javafx.sg.prism.NGNode.render(NGNode.java:1520)
at com.sun.javafx.sg.prism.NGGroup.renderChildren(NGGroup.java:233)
at com.sun.javafx.sg.prism.NGGroup.renderContent(NGGroup.java:199)
at com.sun.javafx.sg.prism.NGRegion.renderContent(NGRegion.java:1249)
at com.sun.javafx.sg.prism.NGNode.doRender(NGNode.java:1598)
at com.sun.javafx.sg.prism.NGNode.render(NGNode.java:1520)
at com.sun.javafx.sg.prism.NGGroup.renderChildren(NGGroup.java:233)
at com.sun.javafx.sg.prism.NGGroup.renderContent(NGGroup.java:199)
at com.sun.javafx.sg.prism.NGRegion.renderContent(NGRegion.java:1249)
at com.sun.javafx.sg.prism.NGNode.doRender(NGNode.java:1598)
at com.sun.javafx.sg.prism.NGNode.render(NGNode.java:1520)
at com.sun.javafx.tk.quantum.ViewPainter.doPaint(ViewPainter.java:99)
at com.sun.javafx.tk.quantum.AbstractPainter.paintImpl(AbstractPainter.java:210)
at com.sun.javafx.tk.quantum.PresentingPainter.run(PresentingPainter.java:95)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:471)
at java.util.concurrent.FutureTask.runAndReset(FutureTask.java:304)
at com.sun.javafx.tk.RenderJob.run(RenderJob.java:58)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
at com.sun.javafx.tk.quantum.QuantumRenderer$PipelineRunnable.run(QuantumRenderer.java:129)
at java.lang.Thread.run(Thread.java:724)
D3D Vram Pool: 13,331,480 used (5.0%), 13,331,480 managed (5.0%), 268,435,456 total
20 total resources being managed
4 permanent resources (20.0%)
1 resources locked (5.0%)
7 resources contain interesting data (35.0%)
0 resources disappeared (0.0%)
D3D Vram Pool: 13,331,480 used (5.0%), 13,331,480 managed (5.0%), 268,435,456 total
20 total resources being managed
4 permanent resources (20.0%)
1 resources locked (5.0%)
7 resources contain interesting data (35.0%)
0 resources disappeared (0.0%)
D3D Vram Pool: 13,331,480 used (5.0%), 13,331,480 managed (5.0%), 268,435,456 total
20 total resources being managed
4 permanent resources (20.0%)
1 resources locked (5.0%)
7 resources contain interesting data (35.0%)
0 resources disappeared (0.0%)
What is the proper way to load images from css in Java 8?
Ref
How to load images from css file in JavaFX 8 - Stack Overflow

There is nothing special to do - you execute the statement from your program just like any other SQL statement. The only thing to be aware of are the privilege/permission issues:
When loading from a file on a client computer:
READ CLIENT FILE privilege is also required for the database user.
Read privileges are required on the directory being read from.
The allow_read_client_file database option must be enabled.
The read_client_file secure feature must be enabled.
Revoking these privileges is also the only way you can prevent a user from executing the statement.

How to copy images from another MC in reversed order??

Hi everyone,
I'm new to AS3 and have been fighting and searching for a solution to this problem for a week now, and I'm VERY close!
I crated a MC holding of a series of images (about 50) and I jump around in it using plenty AS3 scripts (most of which I don't fully understand yet, but I'm working on that to! )
I had to find a way to "rewind" (= play backwards) the MC. Since there is a stop(); command in almost every frame, prevFrame does not work and if I put that in a loop, it goes WAY to fast (but worked).. So I could think of only one way...
Create a new (reverserd) MC with the same image sequence ald reverse it manually and play that one.
This all works fine (very proud of it ).
Now my question:
To get this to work for multiple image sequences, I have to load all images twice (once in MC_1 and again in MC_2 and select them and reverse them).
Not a big one, unless you want to create MANY of those SWF's...
Is it possible to load the 50 images of the first MC in reverse into the second MC dynamically? JUST the images, noting else.
extra info: the MC_2 is already in the lib(empty) and placed on the stage.
something like:
var pointer:Number=1;
for (var:i:Number=50;i>=0;i--) {
get MC_1.picure(var);
put it in MC_2.frame(pointer);
pointer = pointer + 1;
All help is welcome and please take into account that I have little experience and copy most of my scripting from people like you
T.I.A.
Melluw

I tried your advice (thanks for that)
The event I already have is the mouse leave
I //-d out the part I removed (what did work)
The code I ended up with is:
function Start() {
stage.addEventListener(Event.MOUSE_LEAVE, cursorHide);
function cursorHide(evt:Event):void {
var currFrame = MC_1.currentFrame;
if (CCW == true) { //it is true in this case
movStart = (50 - currFrame);
else {
movStart = currFrame;
if (movStart>25) {
MC_1.prevFrame();
// removed swapChildren(MC_1, MC_2); // This is the part I removed
// removed MC_2.gotoAndPlay(movStart);
else {
MC_1.gotoAndPlay (movStart);
And if I leave the stage on the part where movStart is indeed >25
Nothing happens,
So I guess this is not what you meant
Subject: Action Script 3 how to copy images from another MC in reversed order??
I cannot direct you in the loading of the images approach, it will be too complicated, and will probably not work anyways... when you move away from a frame that has dynamic content, you lose the content. So basically, there is nothing practical in taking that approach.
I do niot understand what the problem will be with the enterFrame/prevFrame approach. If everything you can do with the mouse is already used (which I doubt) by the first mc, then there is nothing else you can do with this file. You probably just need to rethink your control scheme. You should search Google for "AS3 slideshow tutorial", and to lighten up your design, add "XML" in that search.
>

Any ideas of how to receive images from a wireless camera (2.4 ghz) to my ipad rather than the handheld DVR supplied?

Any ideas of how to receive images from a wireless camera (2.4 ghz) to my ipad rather than the handheld DVR supplied?

some of those often have webserver so one just navigate to it using a browser

How to move images from Picasa to Lightroom 5 on a mac?

How to import images from Picasa to Lightroom 5 on a mac?

Hi, lnmyers,
I have thousands of pictures stored in Picasa, all of which are stored in my Picasa Web Albums. They are no longer in a directory on my hard-drive, that particular hard-drive having died ages ago. Thank goodness I uploaded them to Picasa's cloud before the hard-drive died. Should that ever darken, I am in trouble. I digress. I downloaded the pictures I wanted from Picasa Web Albums to my new external hard-drive that I set up and attached to my mac. For example: I had a an album called "California 2013" stored in the Picasa cloud. I downloaded the entire album to a folder on my Seagate external drive that I call Lightroom within which I have a folder called California 2013. It took about twenty minutes to get them all (300+ photos). Then, I pointed LR to the California 2013 folder on the Seagate external drive when I wanted to catalogue the pictures into LR. I did not worry about metadata; I took whatever came with the pictures and didn't worry about it. I added copyright, keywords, and ownership info with LR.
I hope that helps.

How to copy images from iPhone folders other than camera roll?

How to copy images from iphone folders other than camera roll?
Images in these folders are synced to iPhone from different laptop and I need to download them in my laptop. I am able to download and access only those pics which are present in Camera Roll folder.Remaining pics are in different folder and also appearing in Photo Library from all folders.
Same problem is with iPod touch as well.

- Via a computer program like PhoneView or Touch Copy
- By using an app like Photo Transfer

How to transfer images from my iPad air to my mac?

How to transfer images from my iPad air to my mac?
If I use iphoto software, I can't see the ipad air on the browser...

You can directly transfer photos and videos via WiFi between the iDevices, PCs, and Macs with an App like Photo Transfer.
See: https://itunes.apple.com/us/app/photo-transfer-app-easily/id365152940?mt=8
Or you can upload the photos and videos to the Dropbox service using the Dropbox App on the iDevice, PC, or Mac and download them to the another device using the Dropbox App on that device. By the way, once the videos are on Dropbox you can share them with others.
See: https://itunes.apple.com/us/app/dropbox/id327630330?mt=8

E61i -- HOW TO SAVE IMAGES FROM WEBSITE WHILE BROW...

ANYBODY KNOWS HOW TO SAVE IMAGES FROM WEBSITE WHILE BROWSING IN E61i ???
ABDULLAH SHAHID SHEIKH
IMANGROUP, IMAN ROAD, NOORPUR, ALI BLOCK, MUSLIM TOWN, FAISALABAD, PAKISTAN.
TEL. 0092418782792-93
CELL. 00923008651424

which version should i use ,, i mean suitable for my E61i,,, the opera mini or the opera mobile????
is opera mini can save the images as well???
25-Aug-200702:43 PM
iantaylor27 wrote:
Hi
If you use opera mobile, it aloows saving of images to memory card etc
www.opera.com
ABDULLAH SHAHID SHEIKH
IMANGROUP, IMAN ROAD, NOORPUR, ALI BLOCK, MUSLIM TOWN, FAISALABAD, PAKISTAN.
TEL. 0092418782792-93
CELL. 00923008651424

How to prevent images from loading?

I am working on creating a web gallery in Dreamweaver CS3. The thumbnails are in a horizontal strip within a layer above the full sized image layer, in other words the strip is hiding part of the image, but only when the image is in a vertical orientation. (the strip has no background, so all that is visible are the actual thumbnails) Upon clicking show/hide text , in a toggle configuration, the strip fades, or shows. On my computer it works perfectly. However, once uploaded, it takes forever to load the images.
The problem: Although I have the thumbnail images are set to preload, all of the full size images are loading as well, which takes alot of time. Is there a way to prevent the full sized images from loading, i.e. only when the thumbnail is clicked?
Frames, in which one frame is thumbnails, and another the is images, is what I normally would use, and have a page for each image. However, for what I have in mind, it will not work (transparency on parts of one frame above another is as far as I can tell not possible).
So how do I prevent images from loading until called for? regards~bill-o

t would help if you posted a link to the page, but I can guess that you have properly diagnosed the cause - the page is encumbered with the weight of all of the full-sized images.
The only way to not have this happen would be to dynamically write the link to the full sized-images on demand, as it were. In other words, the link ISN'T EVEN ON THE PAGE until you have clicked on the corresponding thumbnail, and only at that point is the weight of that image experienced. One easy way to do this is to use the SetText of Container behavior that is part of DW's native arsenal of behaviors. When the thumb is clicked, the SetText behavior is called to write the image link into the enlarged image's container. Need to see a demo? Look here -
http://dreamweaverresources.com/tutorials/settextoflayer.htm
The behavior is called "Set Text of Container", and using it will meet all of your requirements.
To use it, you will have to have the following:
1. A page with a 'container' which is to receive the enlarged image - this could be a table cell, a paragraph tag, a div, or even a span tag.
2. That container will have to be identified with an ID attribute and a valid value, e.g., <div id="enlargedImage">.
3. A dummy page containing each enlarged image, placed sequentially on the page.
To implement the effect, do the following:
1. Open the dummy page in Code view, and select the first image's tag, e.g., <img src="images/foo.jpg" width="123" height="256" alt="whatever" /> (XHTML syntax shown here).
2. Switch to the actual page, select a thumb that will 'open' this enlarged image, and enter "javascript:;" (that's colon semicolon) in the 'Link' field of the Property inspector to make this thumbnail image a null link.
3. Apply the Set Text of Container behavior.
4. Paste the clipboard into the dialog for the behavior, and click OK to close the dialog.
5. Examine the Behavior panel to see which mouse event has been defaulted - probably 'onclick'. If you would rather have this be 'onmouseover' use the Behavior panel Event selector (the dark triangle to the right of the event name) to select 'onmouseover'.
5. Repeat from #1 above until all thumbs have been treated.
Let us know if this does not make sense

How to convert image to binary format

Hi all,
We have developed an Employee search mobile web application in .net which is hosted on an exposed IP server, we need to show the employee data along with the image of the employee on mobile.
When we run this application through our desktop we are able to see the image of the employee since we are doing this through intranet , but when we try to access the same from any mobile device we are able to see only the data but no image, since we are doing this through internet(exposed server).
Please suggest some way to get this image,
is there any function module in ABAP which can convert image to binary format
so that we export binary data to .net application

Hei evryone!
CAn anyone pls help me on how to solve this error:
java.security.AccessControlException: access denied (java.security.SecurityPermission insertProvider.SunJCE)
 at java.security.AccessControlContext.checkPermission(Unknown Source)
 at java.security.AccessController.checkPermission(Unknown Source)
 at java.lang.SecurityManager.checkPermission(Unknown Source)
 at java.lang.SecurityManager.checkSecurityAccess(Unknown Source)
 at sun.plugin.security.ActivatorSecurityManager.checkSecurityAccess(Unknown Source)
 at java.security.Security.check(Unknown Source)
 at java.security.Security.insertProviderAt(Unknown Source)
 at java.security.Security.addProvider(Unknown Source)
 at CryptoTest.processFile(SwingApplet.java:68)
 at CryptoTest.<init>(SwingApplet.java:65)
 at SwingApplet.init(SwingApplet.java:39)
 at sun.applet.AppletPanel.run(Unknown Source)
 at java.lang.Thread.run(Unknown Source)
Is it allright for a swing code to access local resources? like in my case i want my swing app to decrypt and encrypt an image file but when i tried to access the method for decrypting and encrypting i got this error message on my console. Do i have to make my code signed before i could write/read a file on my hard drive?
Any help / suggestions would be much appreciated.Thanks!

Displaying image from binary data using java

hi there,
i have created a swing applet displays me a url, what the url returns me is the image in binary format, and i want to show the complete image using that binary data
so how do i do it.
some thing like this :
URL url = new URL("http://192.168.1.1:8086/file-storage/download/Zerg.jpg?version_id=35688");
JEditorPane jep = new JEditorPane();
jep.setPage(url);
output is in binary on my applet window.

Hey,
This displays an image from a url, you could check if your url is and image or not using URL.getFileName() and see if it ends in gif jpeg etc. and then display it this way.
hope it helps
Nick Hanlon
import java.awt.*;
import java.awt.Image.*;
import java.awt.Toolkit.*;
import javax.swing.*;
import java.awt.event.*;
import java.net.*;
import java.io.*;
import javax.swing.text.html.*;
public class SimpleApp extends JFrame {
public static void main(String args[]) {
SimpleApp aFrame = new SimpleApp();
public SimpleApp() {
super("Frame");
/*JEditorPane jep = new JEditorPane();
jep.*/
try {
HTMLEditorKit htmlKit = new HTMLEditorKit();
JEditorPane ep = new JEditorPane();
try {
ep.setEditorKit(htmlKit);
BufferedReader in = new BufferedReader(
new StringReader(
"<HTML><IMG SRC=\"http://developer.java.sun.com/images/chiclet.row.gif\"></HTML>"));
htmlKit.read(in, ep.getDocument(),0);
getContentPane().setLayout(new BorderLayout());
setResizable(false);
getContentPane().add(ep, "North");
pack();
show();
} catch (javax.swing.text.BadLocationException e) {}
} catch (IOException e) {}
addWindowListener(new WindowAdapter() {
public void windowClosing(WindowEvent e) { System.exit(0); }
}

How to load images from BLOB to javascript?

hi, Guys:
I need to load thumbnail images from BLOB to multiple markers' infowindow in Google map . I have implemented Google map in APEX. I load the data suchas text for every marker's infowindow from Oracle database table with PL/JSON, and infowindow works fine. Could anyone give me a suggestion or example so I know how to load images to javascript?
Thanks a lot.
Database: Oracle 11g R2
APEX: APEX 4.1
Thanks.
Sam

lxiscas wrote:
hi, VC:
Thanks for your kind reply. I need to render these images out of APEX session, actually in javascript that is related to Google map markers' infowindow.
I checked the documents of APEX_UTIL.GET_BLOB_FILE_SRC, but my impression is I need to use it in APEX instead of javascript if my understanding is correct. I already implemented a procedure with PL/SQL to load images from a BLOB column in Oracle database. But the problem is, how can I pass it to javascript code out of APEX to javascript (I could pass text or number from APEX to javascript with PL/JSON though,But I assume that still google map will be within a valid apex session? if so you should be able to use the above api.
Basically what this api does is generates a kind of url to each blob in the database, not sure how google api's deal with this though. Why don't you give it a try?
The other option is to make your pl/sql procedure public and then you can generate the json to include the images urls such as:
     "employees" : [{
               "firstName" : "John",
               "lastName" : "Doe",
               "imgSrc" : "http://somewhere/db_schema.your_download_proc?p_file=#ID#",
               "firstName" : "Anna",
               "lastName" : "Smith"
               "imgSrc" : "http://somewhere/db_schema.your_download_proc?p_file=#ID#",
               "firstName" : "Peter",
               "lastName" : "Jones"
               "imgSrc" : "http://somewhere/db_schema.your_download_proc?p_file=#ID#",
}And then you can use this new attribute to populate the images in javascript using standard img tag
See this tutorial http://docs.oracle.com/cd/E14373_01/appdev.32/e13363/up_dn_files.htm
I did not find any method in PL/JSON to pass image object)? So far I only found example to load images from local files to javascript.Hmm..I don't think you should load image objects.
Vikram

How to save Image from binding FlipView?

I bind 4 images in my FlipView, how save an binding Image to Picture Library;
<FlipView Name="display1" ItemsSource="{Binding}" Foreground="#FFE6D52E" HorizontalAlignment="Center" VerticalAlignment="Center
 <FlipView.ItemTemplate>
 <DataTemplate>
 <Image x:Name="image" Source="{Binding Path=Image}" Stretch="UniformToFill"/>
 </DataTemplate>
 </FlipView.ItemTemplate>
 </FlipView>
private void SaveImage_Click(object sender, RoutedEventArgs e)
 var img = display1.SelectedItem as WriteableBitmap;
 StorageFolder appfolder = await KnownFolders.PicturesLibrary.CreateFolderAsync("myimage",
CreationCollisionOption.OpenIfExists);
 StorageFile myFile = await appfolder.CreateFolderAsync("imge1.jpg", CreationCollisionOption.ReplaceExisting);
 img.Invalidate();
 using(Stream strem = await myFile.OpenStreamForWriteAsync())
 img.Savejpeg(strem, img.PixelWidth, img.PixelHeight, 0, 100);
//for me it is hard to save binding files,I cant save any image

Hi Icce cage,
Per my understanding, you bind the path of image to Image control, so you get image path string from display1.SelectItem property. Try finding Image from this path in installation folder and then copy it to Picture library. Please try the following code
snippet.
Custom class to hold the image object.
public class CustomClass
public string ImagePath { get; set; }
public string ImageName { get; set; }
Initial image sources.
private void Page_Loaded(object sender, RoutedEventArgs e)
images = new System.Collections.ObjectModel.ObservableCollection<CustomClass>();
images.Add(new CustomClass() { ImagePath = "/Images/1.png", ImageName = "1.png" });
images.Add(new CustomClass() { ImagePath = "/Images/2.png", ImageName = "2.png" });
images.Add(new CustomClass() { ImagePath = "/Images/3.png", ImageName = "3.png" });
images.Add(new CustomClass() { ImagePath = "/Images/4.png", ImageName = "4.png" });
images.Add(new CustomClass() { ImagePath = "/Images/5.png", ImageName = "5.png" });
display1.ItemsSource = images;
XAML.
<FlipView RightTapped="display1_RightTapped" Name="display1" Foreground="#FFE6D52E" HorizontalAlignment="Center" VerticalAlignment="Center" >
<FlipView.ItemTemplate>
<DataTemplate>
<Image x:Name="image" Source="{Binding Path=ImagePath}" Stretch="UniformToFill"/>
</DataTemplate>
</FlipView.ItemTemplate>
</FlipView>
Save image to picture library.
private async void display1_RightTapped(object sender, RightTappedRoutedEventArgs e)
CustomClass data = display1.SelectedItem as CustomClass;
if (data!=null)
var installation = Windows.ApplicationModel.Package.Current.InstalledLocation;
var imagesfolder =await installation.GetFolderAsync("Images");
var file = await imagesfolder.GetFileAsync(data.ImageName);
await file.CopyAsync(KnownFolders.PicturesLibrary);
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. Click HERE to participate
the survey.

How to delete images from folder which are not in the database

I am created windows form
i wont to delete images from the folder where i have stored images but i only want to delete those images which are not in the data base.
i don't know how it is possible . i have written some code
private void button1_Click(object sender, EventArgs e)
string connectionString = "Data Source";
conn = new SqlConnection(connectionString);
DataTable dt = new DataTable();
cmd.Connection = conn;
cmd.CommandText = "select * from tbl_pro";
conn.Open();
SqlDataAdapter da = new SqlDataAdapter(cmd);
da.Fill(dt);
int count = Convert.ToInt32( dt.Rows.Count);
string[] image1 = new string[count];
for (int i = 0; i < count; i++)
image1[i] = dt.Rows[i]["Image1"].ToString();
string[] image2 = new string[count];
for (int i = 0; i < count; i++)
image2[i] = dt.Rows[i]["Image2"].ToString();
var arr = image1.Union(image2).ToArray();
string[] arrays;
String dirPath = "G:\\Proj\\";
arrays = Directory.GetFiles(dirPath, "*", SearchOption.AllDirectories).Select(x => Path.GetFileName(x)).ToArray();
int b= arrays.Count();
for (int j = 1; j <= b; j++)
if (arrays[j].ToString() != arr[j].ToString())
var del = arrays[j].ToString();
else
foreach (var value in del) // ERROR DEL IS NOT IN THE CURRENT CONTEXT
string filePath = "G:\\Projects\\Images\\"+value;
File.Delete(filePath);
here error coming "DEL IS NOT IN THE CURRENT CONTEXT"
I have to change anything .Will It work alright?
pls help me
Sms

Hi Fresherss,
Your del is Local Variable, it can't be accessed out of the if statement. you need to declare it as global variable like below. And if you want to collect the string, you could use the List to collect, not a string. the string will be split to chars
one by one.
List<string> del=new List<string>();
for (int j = 1; j <= b; j++)
if (arrays[j].ToString() != arr[j].ToString())
del.Add(arrays[j].ToString());
else
foreach (var value in del)
string filePath = "G:\\Projects\\Images\\" + value;
File.Delete(filePath);
If you have any other concern regarding this issue, please feel free to let me know.
Best regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to combine images from several different shoots into one

Have LR 3.6 for Win xp.
I have 4 differernt photo shoots that I want to combine into one big single catalogue. I want to be able to rank and choose images from all 4 shoots at the same time so I can get the best ones identified.
Each shoot is already in its separate catalogue but I cant figure out how to get all 4 shoots to show up at once so I can rank the best shots and maybe even make a collection of my best images from the 4 shoots.
How might I do this??
Thanks Suzzie

My primary suggestion is that you watch the many videos by Julianne Kost provided in the Adobe site about organizing in the Library Module in LR 4, or read one of the many good LR books. If you want to venture on your own here's a very shorthand description of one of many ways to do what you want. Choose which Catalog you want to use. Open that Catalog and choose "Import from Another Catalog" under the File Menu in the Library Module. Select the images and import them to your chosen main catalog. Once all are in the same Catalog either Keyword all similar images you wish to compare, or make separate Collections of each one. Use the Compare function in the Library ("c" key) and eliminate the one you don't want. Unless you have one client viewing your images in LR and you don't want them to see that you have other images for other clients, I would suggest you use only a single catalog from here on out.

How to render image from binary property of node?

Similar Messages

Maybe you are looking for