How to repeat a delta - if Incorrect data records - green request

Hi...
I have made a delta load and the Error handling in the info package is set as following: Valid records update, reporting possible (request green)
Unfortunately one info object is set to CHAR length 10 and conversion routine ALPHA.
Now when my delta is finished, I have a green light in monitor of my infocube where all the correct data is ready for reporting - thats fine.
The problem I also a green request where the data is marked incorrect - this request doesn't appear on the Cube, but only at PSA (there is no ODS between in our solution).
The data in the infoobject is fine, but due to the definition (CHAR-10, ALPHA) it is probably "just" missing the zero's.
My Question is:
1) Can i force this request up to the Cube?
2) I want to make a new infoobject without the ALPHA-conversion - but how can i then make a repeat delta load, when the previous request are green? Can I set the status to red and expect a repeat delta if I execute the infopackage again?
In the source system (RSA7) there is still data in "Repeat delta".
Hope somebody of You have tried this or have a solution...
BR,
Naeem H.

Hi mti,
Thanks for your prompt reply.
I have loaded the historical records a week ago using full update. We are extracting only the delta records from the source system. If I do a full update again, I need to delete all the request received so far from the source system. So please let me know how to make it correct without performing a full update or else can I do load the records without deleting the mistaken records? If so what will happen if I loaded the records without deleting the mistaken records?
--Regards,
Durai.S

Similar Messages

How to set up Deltas in FI data sources

How to set up deltas for FI Data sources & can any body give me the list of the Finance data sources...
please help me..

Standard FI data sources:
0FI_GL_4 (G/L Accounts- line items)
Takes the data from the FI document tables (BKPF/BSEG) that are relevant to general ledger accounting (compare table BSIS).
0FI_AP_4 (AP-line items) and 0FI_AR_4 (AR- line items
Selections are made from tables BSID/BSAD (Accounts Receivable) and BSIK/BSAK (Accounts Payable)
How the data extraction happens?
In FI extraction 0FI_AR_4 and 0FI_AP_4 are linked with 0FI_GL_4 in order to maintain consistent data transfer from OLTP system (it is called coupled data extraction, Ref OSS notes 428571).
Note: Uncoupled" extraction possible with Plug-In PI 2002.2, see OSS note 551044
0FI_GL_4 writes the entries into the time stamp table BWOM2_TIMEST in the SAP R/3 System with a new upper limit for the time stamp selection.
And now, 0FI_AP_4   and 0FI_AR_4 will copy this new upper limit for the time stamp selection during the next data extraction in the SAP R/3 System. This ensures the proper synchronization of accounts payable and accounts receivable accounting with respect to G/L accounting.
Full load: Not a valid choice because of large volumes of detailed R/3 transaction data.
Delta load:
Note: Here the delta identification process works differently for new financial records and for changed financial records.
New Financial accounting line items which are posted in SAP R/3 sytem will be identified by the extractor using the time stamp in the document header (Table BKPF-(field) CPUDT).
By scheduling an initialization IP all the historical data can be loaded into BW from the application tables and it also sets "X" indicator in field LAST_TS (Flag: 'X' = Last time stamp interval of the delta extraction).That means after the last delta, initialization was done.
OLTPSOURCE     AEDAT/AETIM     UPD     DATE_LOW     DATE_HIGH     LAST_TS
0FI_GL_4     16 May 2007/20:15     Init     01 Jan 1990     15 May 2007
0FI_GL_4     24 May 2007/16:59     delta     16 May 2007     23 May 2007
0FI_GL_4     21 June 2007/18:12     delta     15 June 2007     20 June 2007     X
0FI_AP_4     18 May2007/21:23     Init     01 Jan 1990     15 May 2007
After this, daily delta loads can be carried out depending on timestamp by scheduling delta info packages.
During the delta load , the SAP R/3 system logs two time stamps that delimit a selection interval for a Data Source in table BWOM2_TIMEST(fields TS_LOW and TS_HIGH).
FI -Delta Mode:
A time stamp on the line items serves to identify the status of the delta. Time stamp intervals that have already been read are then stored in a time stamp table (BWOM2_TIMEST).
(Info object 0Recordmode plays vital role deciding delta's .Check the field "delta "in ROOSOURCE /RODELTAM table to identify the image)
The Financial Accounting line items are extracted from the SAP R/3 system in their most recent status (after-image delta method).
AIE: This delta method is not suitable for filling Info Cubes directly in the BW system. To start with therefore, the line items must be loaded in the BW system in an ODS object that identifies the changes made to individual characteristics and key figures within a delta data record. Other data destinations (Info Cubes) can be provided with data from this ODS object.
It uses delta type E(pull) means the delta data records are determined during the delta update by the data source extractor, updated to the delta queue and passed on to BI directly from there.

How to enable the Delta for the data source 0CO_OM_OPA_7

Hi Experts,
I have a business content data source 0CO_OM_OPA_7 and I need to activate and enable Delta for this data source.
This data source is activated (but not delta enabled) and used for full load in my system for the past three year. As this is a full load this data source is carrying more than 4 million records every day with adding 2 millions records every year. The load takes every day 4 to 5 hours for completion.
Now I need to enable the delta for this data source. To enable the delta for this data source I used the transaction RSA5 and clicked on the 'Activate DataSources' but the data source is not enabled the 'Delta'
I have also checked in the RSA6 transaction, the check box for 'Delta' is not checked for this data source.
Can anybody help in enabling the 'Delta' for this data source.
Thanks in Advance
Narendra

Hi,
DS "0CO_OM_OPA_7" won't support deltas, so load to ODS then to Cube. Else delete the overlaping request then load this you can set in InfoPackage level.
You check any Period/Month fields in 0CO_OM_OPA_7 then write simple routine in Infopackage and the set the overlaping deletion.
Use the followng code and change it for your requirement in Infopackage level.
I'm using 0CO_PC_01 DataSource, so it won't have delta so I'm using the following code in InfoPackageag and set delete overlaping req. So eveyday it will delete the old req for that period and then it will load data againg for that period (Full loads).
DATA: l_idx LIKE sy-tabix,
        zzdate LIKE sy-datum,
        zzbuper LIKE t009b-poper,
        zzbdatj LIKE t009b-bdatj,
        zzperiod(7) TYPE c.
READ TABLE l_t_range WITH KEY
       fieldname = 'FISCPER'.
l_idx = sy-tabix.
zzdate = sy-datum - 1.
CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'
    EXPORTING
      i_date               = zzdate
*             I_MONMIT             = 00
      i_periv              = 'V3'
           IMPORTING
     e_buper              = zzbuper
     e_gjahr              = zzbdatj.
*           EXCEPTIONS
*             INPUT_FALSE          = 1
*             T009_NOTFOUND        = 2
*             T009B_NOTFOUND       = 3
*             OTHERS               = 4
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CONCATENATE zzbdatj zzbuper INTO zzperiod.
l_t_range-low = zzperiod.
l_t_range-option = 'EQ'.
l_t_range-sign = 'I'.
MODIFY l_t_range INDEX l_idx.
Thanks
Reddy

How to find out who create a data record

Hello expert,
is it possible to find out who created a special data record on the cube, even if this is not cosidered by the data model?
We do not save sy-uname on cube.
Thanks
Johannes

Hi Johannes,
you can do this with this How To - Paper:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0e3df0c-c370-2910-a696-96f5f38574d7
Cheers, Clemens
PS: The solution described in the HowTo Paper can be done for BPS and IP as well

How to rectify the error message " duplicate data records found"

Hi,
How to rectify the error "duplicate data records found" , PSA is not there.
and give me brief description about RSRV
Thanks in advance,
Ravi Alakunlta

Hi Ravi,
In the Info Package screen...Processing tab...check the option Do not allow Duplicate records.
RSRV is used for Repair and Analysis purpose.
If you found Duplicate records in the F fact table...Compress it then Duplicate records will be summarized in the Cube.
Hope this helps.

How to clear/delete diagnostic and usage data records?

The records under diagnostic and usage getting more each day and i have no ideas on how to delete it. Have try to sync with pc via iTunes and off the function under setting/privacy/location service/systems services/diagnostic and usage. Non works, please HELP!

FYI
Complete guide to using iOS 6
http://howto.cnet.com/ios-6-complete-guide/
Guide to Built-In Apps on iOS
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/guide-to- built-in-apps-ios
You can download a complete iOS 5 iPad User Guide and iOS 6 iPad User Guide here: http://support.apple.com/manuals/ipad/
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Apple iPad Guided Tours - Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
http://www.youtube.com/watch?v=YT2bD0-OqBM
http://www.youtube.com/watch?v=ROY4tLyNlsg&feature=relmfu
http://www.youtube.com/watch?v=QSPXXhmwYf4&feature=relmfu
How to - Articles & User Guides & Tutorials
http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
 Cheers, Tom

How to restrict number of Data Records from Source system?

Hi,
How can I restrict the number of Data records from R3 source system that are being loaded into BI. For example I have 1000 source data records, but only wish to transfer the first 100. How can I achieve this? Is there some option in the DataSource definition or InfoPackage definition?
Pls help,
SD

Hi SD,
You can surely restrict the number of records, best and simplest way is, check which characteristics are present in selection screen of InfoPackage and check in R3, which characteristics if given a secection could fetch you the desired number of records. Use it as selection in InfoPackage.
Regards,
Pankaj

How to UPDATE MASTER DATA RECORD PA0377 using FM HR_INFOTYPE_OPERATION

How to UPDATE MASTER DATA RECORD IN INFOTYPE 0377 DIRECTLY using function module HR_INFOTYPE_OPERATION ? When i use operation = 'MOD' im getting an ERROR as NO DATA STORED FOR 0377 IN SELECTION PERIOD.
       Can anyone please help me how to use HR_INFOTYPE_OPERATION to UPDATE MASTER DATA RECORD.
Thanks,
Karthi.

Hi,
please check this code
it is very useful
infotypes: 0105.
parameters: p_pernr type p0105-pernr,
            p_subty type p0105-subty,
            p_begda type p0105-begda,
            p_endda type p0105-endda,
            p_opera type pspar-actio,
            p_usrid type p0105-usrid,
            p_commt as checkbox.    "Useful only when NO_COMMIT is 'X'
data: w_return type bapireturn1,    "Error handling data
      w_key type bapipakey,         "If record has been created or changed the created/ changed
                                    "record's key (PSKEY) will be populated
      v_message type string.        "For printing returned messages
call function 'BAPI_EMPLOYEE_ENQUEUE'
exporting
    number = p_pernr
importing
    return = w_return.
if w_return is initial. "Employee is not locked
p0105-pernr = p_pernr.
p0105-subty =
p0105-usrty = p_subty.
p0105-begda = p_begda.
p0105-endda = p_endda.
p0105-usrid = p_usrid.
*Calls Internally HR_MAINTAIN_MASTERDATA
call function 'HR_INFOTYPE_OPERATION'
    exporting
      infty         = '0105'
      number        = p_pernr
      subtype       = p_subty
      validityend   = p_endda
      validitybegin = p_begda
      record        = p0105
      operation     = p_opera
      dialog_mode   = '0'
      nocommit      = 'X'
    importing
      return        = w_return
      key           = w_key.
endif.
if w_return is not initial.
message id w_return-id type w_return-type number w_return-number
          with w_return-message_v1 w_return-message_v2 w_return-message_v3
          w_return-message_v4 into v_message.
case w_return-type.
    when 'A' or 'E'.
      format color col_negative. write:/ v_message.
    when others.
      format color col_heading. write:/ v_message.
endcase.
call function 'BAPI_EMPLOYEE_DEQUEUE'
    exporting
      number = p_pernr.
else.
format color col_positive. write:/ 'Record Updated Successfully.'.
if w_key is not initial.
    write:/ 'Key contains',
          / 'Personnel Number:', w_key-employeeno,
          / 'Subtype (absence type):', w_key-subtype,
          / 'Start date of Absence:', w_key-validbegin,
          / 'End date of Absence:', w_key-validend.
endif.
commit work.
endif.
Thanks and regards
durga.K

Loading ODS - Data record exists in duplicate within loaded data

BI Experts,
I am attemping to load an ODS with the Unique Data Records flag turned ON. The flat file I am loading is a crosswalk with four fields, the first 3 fields are being used as Key Fields in order to make the records unique. I have had this issue before, but gave up in frustration and added an ascending number count field so simply create a unique key. This time I would like to solve the problem if possible.
The errors come back referring to two data rows that are duplicate:
Data record 1 - Request / Data package / Data record: REQU_4CNUD93Q3RCC80XFBG2CZXJ0T/000003/ 339
Data record 2 - Request / data package / data record: REQU_4CNUD93Q3RCC80XFBG2CZXJ0T/000003/ 338
And below here are the two records that the error message refers to:
3     338     3902301480     19C*     *     J1JD
3     339     3902301510     19C*     *     J1Q5
As you can see, the combination of my three Key Fields should not be creating a duplicate. (3902301480, 19C(asterisk) , (asterisk))   and (3902301510, 19C(asterisk) , (asterisk)) I replaced the *'s because they turn bold!
Is there something off with the numbering of the data records? Am I looking in the wrong place? I have examined my flat file and can not find duplicates and the records that BW say are duplicates are not, I am really having a hard time with this - any and all help greatly appreciated!!!

Thank you for the response Sabuj....
I was about to answer your questions but I wanted to try one more thing, and it actually worked. I simply moved the MOST unique Key Field to the TOP of my Key Field list. It was at the bottom before.
FYI for other people with this issue -
Apparantly the ORDER of your Key Fields is important when trying to avoid creating duplicate records.
I am using four data fields, and was using three data fields as the Key Fields. Any combination of all three would NOT have a duplicate, however when BW finds that the first two key fields match, sometimes it apparantly doesn't care about the third one which would make the row unique. By simply changing the order of my Key Fields I was able to stop getting the duplicate row errors...
Lesson - If you KNOW that your records are unique, and you are STILL getting errors for duplicates, try changing the ORDER of your key fields.

Updating to InfoCube IC_TEST : 2 - 0 Data Records

Hi friends i have to create dtp with flat file and loading data some errors are there
plz give me solution.
Request 25269
Process Request
Data Package 1: Errors During Processing
Updating to InfoCube IC_TEST : 2 -> 0 Data Records
Messages for data records saved; request is red acc. to configuration

Hi Prasana,
Please provide the error message?
check in the monitor tab for the error message.
Regards,
Ravi Kanth

How to retrieve DELTA for Particular date for FIGL(ECC) into BI

Hi,
Model of this ODS is in BW3.5. (DS --> ODS --> Infocube)
My loads are daily from 0FI_GL_4 (line Items) into ODS. There was from error in the load, so I deleted the request (manage & and made QM status RED in monitor also) from ODS and also from PSA for a particular date(xx.xx.xxxx).
Now I tried loading the Infopackage, but the data is not coming for that date (xx.xx.xxxx) into ODS.
I have set to DELTA REPEAT in RSA7(ECC) , but after saving, it is again coming back to DELTA UPDATE.
All the Previous and Next day load was fine,but i did not get the data for xx.xx.xxxx.
In Selection screen for DS and Infopackage does not have 0CALDAY or 0PSTNG_DATE.
Can you please help me out in telling how to get the data for that particular date (xx.xx.xxxx) into BI.
DOES REPAIR FULL REQUEST SOLVE MY PROBLEM?
Full Points will be assigned.
Regards,
Bindu.

Hi Viren,
Initially I have tried what you have said, but ERROR is coming as AS YOUR PREVIOUS DELTA IS INCORRECT, YOU CANNOT LOAD THIS DELTA. I am not getting any option of REPEAT DELTA.
"I have set to DELTA REPEAT in RSA7(ECC) , but after saving, it is again coming back to DELTA UPDATE."
As I am not getting REPEAT DELTA, to get that I tried saving the 0FI_GL_4 as DELTA REPEAT in RSA7 (ECC).
Please let me know any more information required.
Thanks,
Bindu.

HI,How can i set delta option for costumised Generic data source

Hi Sir/Madam,
How can i set delta option for costumised Generic data source.
Regards,
Vishali.R
Please search the forum before posting a thread
Edited by: Pravender on Aug 15, 2011 1:26 PM

Hi,
Go to RSO2 transaction and click on change then on the tool bar click on Generic Delta button. In the next popup you can set your delta.
Regards,
Durgesh.

How can I change incorrect "date received" info in Mail?

When I switched to Mavericks I had to leave behind Eudora, which I liked. I started using Mail, but when Mail imported my email files from Eudora it misdated many of the files, using the date the file was imported as the "date received". Since I use the date to help me keep track of sequencing of emails received, having this incorrect date thrown in is a problem, but I can't find any way to correct it.
Exactly how can I correct the "date received" on mislabeled emails? The dates were correct in my Eudora files, but I can't access those any more now that I'm on Mavericks, so I'm going to have to manually check the emails to find the dates in the headers or message contents.
I'm not highly tech savvy, so if I have to go into the Terminal, I'll have to know exactly what prompts to look for and what specific information to provide, and in what format.
Help!

Hi Stuart.
Open /Applications/Utilities/Terminal, type the following command (you can just copy it here, paste in a text editor, modify the email address, then copy the whole command again, and paste in Terminal), and press <Return>:
defaults write com.apple.mail UserHeaders '{"Reply-To" = "[email protected]";}'
The following article contains a more thorough description of this technique that takes into consideration the possibility that you might inadvertently overwrite other default headers by doing that:
How to Add a Reply-To Header to All Emails You Send in Mac OS X Mail

I changed my mailto: to yahoo mail but now when I click an email link it has the mailto: and the subject both in the To: part of the email. I have to delete the incorrect data out. How can I fix this?

I changed my mailto: to yahoo mail but now when I click an email link it has the mailto: and the subject both in the To: part of the email. I have to delete the incorrect data out. How can I fix this?

Firefox sent an email to me to confirm that I had asked the above question. The email had a link to click. When I clicked it from Firefox, nothing happened. Then I opened IE, signed into Comcast, opened the email, clicked the link, and it brought me here.

How to set the delta for existing generic data source

Hi BW Guru's
I have a problem,actually i have a exsting generic data source"ZFRBHRCHY". Master data Object ZFRBHRCHY is getting laoded from all some R/3 Clusters on a Daily Basis. It is full load and takes 4 to 5 Hours, but number of added records(2000) are very less,while total records are more(40Lks).For avoiding this larger load time every day,i want to implement delta extraction for this.
How to implement this,(i want steps for this) .
Thanks in advance,
Regards
reddy

yeas agree with sanakar,
this field which shankar is talking about must be entry date (if u delta timestamp is date, u will also have to mention this table field name in definition of delta), this means that this field will catch last change to the record, so that it will be delta enabled based on the latest change date. This is very important becuase if u use date like posting date to the delta then back dated posting will not captured in to the delta, as delta for this back date is already been done.
Hope u understand this.

How to repeat a delta - if Incorrect data records - green request

Similar Messages

Maybe you are looking for